Related
Hi all,
I just tried to load the new AIM for PPC2002 on my SER 1.2 XDA and it installed fine, but when trying to run it - it said it was not valid to run on the device..
Has anyone else seen this ??
Yes. In fact, I saw it on the new 4.00.16 T-Mobile ROM. It has the program installed (in 'Program Files' even), but it doesn't work giving the same message, and there's no link to it in 'Programs' either.
Keep in mind this is a US T-Mo software upgrade. The version of AIM that comes with it is for US T-Mo only. It checks your SIM card ID and if you are on any other network other than US T-Mo it will not run. You can do a search online to get the Old AIM client for PPC or you can buy the new one they both work since they are not specific to T-Mo version. I don't know why this is other than this software is avail for download off their website and anyone could get it for free since AOL has now decided to sell it and released a newer full client that also deos AOL Mail.
Hmm another thought is since its in ROM you might be able to overwrite all the .dlls in the \windows\ dir with the .dlls that are in the older version or maybe overwritting the listed files that are diff between 40011 & 40016 with blank text files with same name and changed file ext. This would however require you to remove the T-mo apps from start up incase it looks for any of these files durring start up. There's always a way unless devices stop thinking in x&o/1&0's.
Easy path just find th eold one it's online some where.
Tried to make a copy of my ROM to SD Card. Dialog Box shows it copying but after completing in 6mins or so nothing shows on the card. I want to back up prior to copying XDA ROM and unlocking. Any advice would be appreciated.
well
you dont really need to save it on your sd card. You can just back it up in a file on your pc. click the browse button beside the combo box(ie the button with 3 dots) and select a name and a path. it would transfer the os to your pc and u can keep the back up there where its safer. :wink:
Thanks for your reply. Unfortunately I've already tried that and I just get an error message - Unsupported target filetype - don't know how to write destinationfile c:\Program Files\etc...
well
okay this is what you'll do :: put this line in the destination "c:\rom\os.nb1"; for the source select the combo box then select from device and it should work. if it doesnt then reply me asap. :roll:
Thanks again but unfortunately entering c:\rom\os.nb1 in the destination dialog didn't work. It returned: error opening c:\rom\os.nb1 for writing. The system cannot find the path specified. error opening target device.
Well
PS. Should also add I didn't quite understand your reference to "for the source select the combo box then select from device and it should work. if it doesnt then reply me asap
Well
PS. Should also add I didn't quite understand your reference to "for the source select the combo box then select from device and it should work. if it doesnt then reply me asap
check the image i just sent u. ull see what i asked you to click for the source.(Device Memory (current rom))
then for the destination clikc the 3 dots on its side and type in a name eg os.nb1 and lcick open. :!: :?:
Cool
Thanks, man. It looks like that's done the trick. It's currently copying. Once that's done I believe I need to load the XDA ROM to facilitate the unlock. Many thanks for your help.
David
no probs men. but i need to unlock some 2 more phones an am having a hell of a time. my bros samsung e700 and my dads hp6315. do u by any chance know how i can get that done
I wish I could reciprocate but unfortunately I don't know much about my Wallaby let alone those you've mentioned. I've just downloaded the XDA ROM and my device is not accepting it. Reading stuff on the forum to try to figure out what the problem is. Don't want to take away from your other problems with the Samsung and HP but let me know if you've heard of any problems as to why a device won't accept the XDA ROM. I'm probably doing something wrong.
Cheers for now.
okay i see you really do not know much. now all you have to do is get the special edition rom u get. then use the same program u used to backup your rom to upload the new one. i really want you to be 100% sure you have a back up. then duplicate the back up for safety reasons. Then extract the speacial edition rom. if its just the rom u got the use the program to do it. if its the whole installation u got a progamm called PROGRAMME A should open and it will guide you throught. Then i hope your phone is a wallaby/qtek 1010/ o2 xda/tmobile MDA they are all the same. else your better stop now. then why dont you lets chat i think it had be easier. yahoo ::nowoxi or msn ::[email protected]
Unfortunately, I haven't IM loaded currently. However, what you told me is a big help. I do have the MDA version of the phone so I'll try that when I get back as I have to leave right now. Thanks again and I'll keep you posted as to how it works out.
Hi nowoxi,
got a problem with OSImageTool, I did my own ROM copy but now how can I upload it to my device in case of need(mine is 2020..)? Do I need a SD card or I can do it directly from the xda image program? Many thanks
P.S. if you find a Yahoo mess request,well...it's me!
Didnt really get your compostition. I dont know where to start from or what to think. I know you have a problem and i know its with the ostool but i really dont get (understand) what your problem is. The rom u said u have. is it one you cooked up or the one on your phone before. then wher edo u wanna send stuff to. your phone or you wanna backup the one on your phone :?:
Sorry for the confusion, here's the story.
I'm the owner of an Orange SPV m1000, I received it last week and don't know much about PocketPC....my device is an English version, I'd like to convert it to an Italian one. I found an ITA ROM (it's for Qtek 2020 but it should work..) and soon I'd like to try to flash it. In case of need (maybe something wrong in the flashing...) I'd like to keep a copy of the original ROM installed in my device so I used XDAtools to get one, as you explained in this thread. Now I have this .nb1 file in my pc and the question is: can I upload it from my pc directly in case something goes wrong during the upgrade flashing? Or should I copy the .nb1 file to the SD card first and then try to flash from it ( but in what way?) ? Hope to made it clear now, thanks to your help!
P.S. Still looking the forum for a guide on using the imagetool....please be patient :wink:
Well you can restore it directly from your pc. just follow the steps in the thread. for source instead of selecting something in the combo box. click the 3 dots at the side then use your phone as destination. i hope that helps you out.
Sure thing!
Just one more question: what happen after I have finished upload the .bf1 file to my device with imagetools? It's a kind of autostart procedure or do I have to make some move? Thanks again, bye from Italy
nowoxi
I'm back and about to try to load the XDA ROM based on your instructions. However, question: do I have to removed the existing ROM from my device or will the XDA ROM simply overwrite it?
Hope you're around this Sunday evening/Monday morning!
Cheers
The rom will be overwritten.
Finally got my hands on this.
Enjoy.
Taken from latest Ext rom.
Also does any one know what ChgScutAttri.exe does.
In file info it says it's a cold boot app?
Do you think this one is better then SPB Insight?
mikkelnl said:
Do you think this one is better then SPB Insight?
Click to expand...
Click to collapse
Is SPB Insight free?
And is it from official HTC Rom?
And can it run from Storage Card?
I neer tried SPB because i tend to use freeware as much as possible.
Hi, could u pls upload the whole Ext_Rom contains? thanks.
Edit
Uploaded the latest Info feed
lawrenceloh said:
Hi, could u pls upload the whole Ext_Rom contains? thanks.
Edit
Uploaded the latest Info feed[/QUOTE
How do you install this on your touch? just copy to the touch and doubleclick?
thanks!
Click to expand...
Click to collapse
connect your pda to pc(with activesync), then run the exe file.
or run the cab below frm your pda.
lawrenceloh said:
connect your pda to pc(with activesync), then run the exe file.
or run the cab below frm your pda.
Click to expand...
Click to collapse
Thanks, is this cab file you posted the latest version of RSS info?
stekkis said:
Thanks, is this cab file you posted the latest version of RSS info?
Click to expand...
Click to collapse
yes, extracted frm the above exe
lawrenceloh said:
yes, extracted frm the above exe
Click to expand...
Click to collapse
Ok! muchos gracias!
recepción
Could we have some screens please..
lawrenceloh said:
recepción
Click to expand...
Click to collapse
Sorry to disturb you once again, but is it possible to send that file to my email account, I am at my work right now and they don't allow me to dl this cab file my address is stijn_celis A T hotmail.c om
thanks
Ok I copied the zip file to my storage card, I inzipped it and clicked on the exe file. It now says ERROR EXECUTING FILE.
I only posted the files for use. I'm not supporting this thread.
And it's not my program. But i will upload the whole Ext Rom the're only a voice commander in there that's extra.
Update ROM to required version Setup Error
I am using PDAViet Transformer 1.0.
When I install the cab, it gives a Setup Error: Unable to install application. Please update your device ROM to the required version before trying again.
Does this mean that Info Feed is tied to the Dopod Roms?
Thanks,
Alex
I did see that it checks for which device it installs to. But that can be circumvented if someone Extracts the cab and makes a new installer for it.
Sorry but it's not on my to do list.
I hope you can forgive me for that.
But you can read my "Extracting a Cab Tutorial the manual way"
Or look for that magic cab maker i'm also after that makes Cab files out of OEM packages. It's mostly text in the end that needs editing.
problem placing cache on storage card
When I set Info Feed to store its data on my storage card, then attempt to manually Update any channel, I get an error message, "Not enough storage is available to complete this operation." As long as it's set to use memory, there's no problem.
Current size of Info Feed's data = 3MB
Free program memory = 66MB
Free storage memory = 97MB
Free storage card space = 2.5GB
Obviously it's not a space limitation, per se. Cache/reg value?
Anyone know what's causing this?
@mtn_lion
I encountered the same storage problem after switching to a new 4 GB SDHC card. Info Feed worked fine on all of my other memory cards but I couldn't get it working on the new card.
I found out that there is a strange bug that causes Info Feed to display the "Not enough storage is available to complete this operation" message when there is a lot of free space available on the memory card. After copying some large files to the card Info Feed was working fine again. (At the moment I have a little more than 2GB of free space available.)
It is a stupid workaround but give it a try! It worked for me...
@HipNosis
Thanks for working that out! I'm very pleased to have an answer to the mystery. I'm not gonna waste space on my 8GB card by copying "placeholder" files, but your discovery will make me hurry up and copy more of my music to the card. Do we think that the 2GB threshold is significant?
BTW, I have a line open to support at InfoFeed's maker, Jeyo, about this issue and will share your info with them.
G'day!
Hi. My SGA has the latest Official CyanogenMod nightly. I have Windows XP, a bluetooth dongle, and bluesoleil drivers.
I am able to send images and apk files from my pc to my phone. But when I try to send an epub file, or a 7z file, my pc says:
"Access is denied. Please make sure you have the proper right to access the files or folders."
So I tried to create a compressed file and instead of using 7z, I used .zip. And it was able to send it. So I'm positive that my phone has a list of allowed filetypes to be received. Is there any way to edit it? Thanks.
PS: I tried declining a file (that successfully went through), and it gave the same access denied error on my pc. So I believe that my phone is automatically denying certain filetypes. Thanks.
yeah i think so...i cant send apk file via bluetooth i think ace wont allowed it
sent from ACE TO ACE
Same problem
What I did was changed the extension of those files to .Mp3
This way I was able to send via bluetooth and then on phone change it back to original extension
Problem?
----------------
Did I send this :O
Well that's really a hassle to do. I'll just have to wait for a real solution.
Also, every time I receive a file it asks me to confirm it. Stock Gingerbread had a check box to always receive files [from a specific device] automatically. I can't seem to see that option here. Any thoughts? Thanks again.
d4ryl3 said:
Well that's really a hassle to do. I'll just have to wait for a real solution.
Also, every time I receive a file it asks me to confirm it. Stock Gingerbread had a check box to always receive files [from a specific device] automatically. I can't seem to see that option here. Any thoughts? Thanks again.
Click to expand...
Click to collapse
Every cm7 has that problem.. No solution to the best of my knowledge
----------------
Did I send this :O
I recently bought a Zebra/Symbol/Motorola TC70 on eBay that is apparently from a Walmart and is seemingly locked down with a custom firmware. I did find firmware files and flashing instructions on Zebra's website. You are supposed to boot into recovery and flash the main image and then afterwards you flash one of two smaller zip files. One is designated as Factor Reset and one is Enterprise Reset. In the description of these files, the Factory Reset says its wipes all partitions and data including the Enterprise folder/partition and the Enterprise Reset does everything but that folder/partition. Zebra seems allow me to download everything but the Factory Reset file which is the one I assume I need to remove the Walmart branded stuff.
My question is, is it possible to manually wipe this partition and gain the same effect as the Factor Reset file? Bad idea maybe?
Any help would be appreciated
Installation instructions can be found here: https://www.zebra.com/content/dam/z...date Loader Image - Non-GMS Release Notes.pdf
TC70 Locked Down
Did you get any joy in downloading the software for the TC. I have one too thats locked down to a custom firms software that and the Zebra site wont allow me to download due to registration of the device being with someone else
Another TC70 here in need of an enterprise reset. I have no idea of its provenance so can't access the stuff on the Zebra website.
Going the whole hog, a non-enterprise reset would be even better and a KitKat GMR ROM image as well would be REALLY welcome!!.
Thanks for any help
After a lot of trying to get the enterprise reset out of Zebra I had no joy. These are simply locked up so tight that once the purchaser has registered the unit only they can gain software for them. Its a pretty good good for the purchaser as they know if one of there handsets go missing no one else can use it so it should deter theft of these expensive handsets but its unfortunate for people who legitimately buy a second hand unit. I had submitted the purchase invoice to Zebra showing the unit had been legally obtained but since it was still registered to another company they couldn't help me. There seems to be a lot of Royal Mail / Parcel Force handsets floating around... avoid them as you will never get it to work. One things for sure Zebra are no way as near helpful as Motorola used to be.
Hope I can help you guys out a little on this one....
Got access to all roms, etc from the Zebra web site and can get anything they offer as far as factory resets (enterprise and otherwise), roms and manuals. I am uploading the ones I already have downloaded for KitKat, Lollipop and MM. If you don't see what you need when I post the links (hopefully here shortly), PM me and I'll download it from the website for ya.
Stay tuned...
*EDIT*
Here is a link to my Dropbox folder with the files for the TC70. The other files I already have and full firmwares are still uploading (due to only having DSL access where I'm at it's going to take a few hours). Check the unit you have and the Zebra website to confirm versions needed, but I believe the latest two versions of the enterprise reset files are up and ready to download.
Again, PM me for specific versions needed.
*EDIT#2*
Link to the thread I started where you can discuss and request specific versions of firmware for your TC70/TC75 or any other Motorola/Symbol/Zebra device firmware.
bobtsunam said:
Hope I can help you guys out a little on this one....
Got access to all roms, etc from the Zebra web site and can get anything they offer as far as factory resets (enterprise and otherwise), roms and manuals. I am uploading the ones I already have downloaded for KitKat, Lollipop and MM. If you don't see what you need when I post the links (hopefully here shortly), PM me and I'll download it from the website for ya.
Stay tuned...
*EDIT*
Here is a link to my Dropbox folder with the files for the TC70. The other files I already have and full firmwares are still uploading (due to only having DSL access where I'm at it's going to take a few hours). Check the unit you have and the Zebra website to confirm versions needed, but I believe the latest two versions of the enterprise reset files are up and ready to download.
Again, PM me for specific versions needed.
*EDIT#2*
Link to the thread I started where you can discuss and request specific versions of firmware for your TC70/TC75 or any other Motorola/Symbol/Zebra device firmware.
Click to expand...
Click to collapse
Hi
I need the TC75 full ROM zip. Kitkat or lollipop version.
Thank You very much
Just bought a TC75 and looking for the firmware. No luck yet but will keep trying and post if I find anything
Chris
Sent from my Swift 2 Plus using Tapatalk
bobtsunam said:
Hope I can help you guys out a little on this one....
Got access to all roms, etc from the Zebra web site and can get anything they offer as far as factory resets (enterprise and otherwise), roms and manuals. I am uploading the ones I already have downloaded for KitKat, Lollipop and MM. If you don't see what you need when I post the links (hopefully here shortly), PM me and I'll download it from the website for ya.
Stay tuned...
*EDIT*
Here is a link to my Dropbox folder with the files for the TC70. The other files I already have and full firmwares are still uploading (due to only having DSL access where I'm at it's going to take a few hours). Check the unit you have and the Zebra website to confirm versions needed, but I believe the latest two versions of the enterprise reset files are up and ready to download.
Again, PM me for specific versions needed.
*EDIT#2*
Link to the thread I started where you can discuss and request specific versions of firmware for your TC70/TC75 or any other Motorola/Symbol/Zebra device firmware.
Click to expand...
Click to collapse
Hey I need the T700HKXXXREENxyyzz.zip file for the symbol Tc70 thank yu
bobtsunam said:
Hope I can help you guys out a little on this one....
Got access to all roms, etc from the Zebra web site and can get anything they offer as far as factory resets (enterprise and otherwise), roms and manuals. I am uploading the ones I already have downloaded for KitKat, Lollipop and MM. If you don't see what you need when I post the links (hopefully here shortly), PM me and I'll download it from the website for ya.
Stay tuned...
*EDIT*
Here is a link to my Dropbox folder with the files for the TC70. The other files I already have and full firmwares are still uploading (due to only having DSL access where I'm at it's going to take a few hours). Check the unit you have and the Zebra website to confirm versions needed, but I believe the latest two versions of the enterprise reset files are up and ready to download.
Again, PM me for specific versions needed.
*EDIT#2*
Link to the thread I started where you can discuss and request specific versions of firmware for your TC70/TC75 or any other Motorola/Symbol/Zebra device firmware.
Click to expand...
Click to collapse
hi
I can not download the T51N0M3XCPUEF01203.zip file from their site.
can you help me thx
Request
Hi,
I just found this thread trough Google.
And i was wondering if you could still access the files on the Motorola site.
Because file: T70N0LXXVRGEF21002.zip is the latest, but is missing the GMS certification.
something i think is needed/handy for using the Google Playstore on updates.
Or if anyone knows where i can get the updates, please let me know.
Edit: the correct 'GMS enabled' firmware should be: T70N0LXXARGEF21002.zip,
and it seems to need update file: 'T70N0L50ARPEF21002.zip'
and Lifeguard? updates?
new info
Mohdennisnl said:
Hi,
I just found this thread trough Google.
And i was wondering if you could still access the files on the Motorola site.
Because file: T70N0LXXVRGEF21002.zip is the latest, but is missing the GMS certification.
something i think is needed/handy for using the Google Playstore on updates.
Or if anyone knows where i can get the updates, please let me know.
Edit: the correct 'GMS enabled' firmware should be: T70N0LXXARGEF21002.zip,
and it seems to need update file: 'T70N0L50ARPEF21002.zip'
and Lifeguard? updates?
Click to expand...
Click to collapse
Hi,
I have bought an usb/charge cable for the TC70.
and it actually charges also without an adapter attached to it.
but on-topic,
I also see its 'protected' with Soti.
And i was wondering if you have an Factory Wipe image.
Because when i applied the Full Software Update, It forces the install of the Soti protection also,
rendering it kinda unusable.
But you can get more acces tough the on/off button in terms of connectivity, light settings.
The way to reset these is to put the reset *.zip file on the micro sd card, turn the device off, then hold down the lower button on the left hand side marked with a yellow stripe while holding the power key. It will boot into recovery, select install update from external sd card using the volume keys, then use the top left side button to select the zip. I have a TC70 wifi version and I need the latest update T70N0LXXARGEF21002.zip which you just cannot find or get anywhere. Everything works fine on mine except wifi, I need the wifi config .bin file I believe. PLEASE PLEASE PLEASE if anyone has these files or has access to them can they download them and upload to a file sharing please.
nokiaman2002 said:
The way to reset these is to put the reset *.zip file on the micro sd card, turn the device off, then hold down the lower button on the left hand side marked with a yellow stripe while holding the power key. It will boot into recovery, select install update from external sd card using the volume keys, then use the top left side button to select the zip. I have a TC70 wifi version and I need the latest update T70N0LXXARGEF21002.zip which you just cannot find or get anywhere. Everything works fine on mine except wifi, I need the wifi config .bin file I believe. PLEASE PLEASE PLEASE if anyone has these files or has access to them can they download them and upload to a file sharing please.
Click to expand...
Click to collapse
i know how to reset it.
but i need the reset file, just like i asked...
and to me, the 'latest' OS file is t70n0lxxargef02002.zip
findable that is
TC510K
Hello can you please help me find the factory reset update file for the TC510K please. It says that I need the file T51N0M3XCFREF01203.zip but I can not gain access to it because ".the access is restricted but free.
To get the system image, you need to contact the Motorola support, as stated on the support site:" Please help . Thank you!
bobtsunam said:
Hope I can help you guys out a little on this one....
Got access to all roms, etc from the Zebra web site and can get anything they offer as far as factory resets (enterprise and otherwise), roms and manuals. I am uploading the ones I already have downloaded for KitKat, Lollipop and MM. If you don't see what you need when I post the links (hopefully here shortly), PM me and I'll download it from the website for ya.
Stay tuned...
*EDIT*
Here is a link to my Dropbox folder with the files for the TC70. The other files I already have and full firmwares are still uploading (due to only having DSL access where I'm at it's going to take a few hours). Check the unit you have and the Zebra website to confirm versions needed, but I believe the latest two versions of the enterprise reset files are up and ready to download.
Again, PM me for specific versions needed.
*EDIT#2*
Link to the thread I started where you can discuss and request specific versions of firmware for your TC70/TC75 or any other Motorola/Symbol/Zebra device firmware.
Click to expand...
Click to collapse
Files
jimmyhieuphan said:
Hello can you please help me find the factory reset update file for the TC510K please. It says that I need the file T51N0M3XCFREF01203.zip but I can not gain access to it because ".the access is restricted but free.
To get the system image, you need to contact the Motorola support, as stated on the support site:" Please help . Thank you!
Click to expand...
Click to collapse
I cannot find these files ANYWHERE without being asked questions by symbol, most of these scanner come from supermarkets and are ex contract but are still tied in zebras database to a contract so they will not release the files to you under any circumstance. This is really frustrating, the original guy bobtsunam who provided the dropbox folder has not been online since august so I think we are screwed.
Dear me, I am in a massive discussion with zebra/symbol support trying to get this file, they suggested I download it, I told them I couldnt, they now want the unit sent in to them.......this is going to be a long thread over a zip file....
anumeric1122 said:
I recently bought a Zebra/Symbol/Motorola TC70 on eBay that is apparently from a Walmart and is seemingly locked down with a custom firmware. I did find firmware files and flashing instructions on Zebra's website. You are supposed to boot into recovery and flash the main image and then afterwards you flash one of two smaller zip files. One is designated as Factor Reset and one is Enterprise Reset. In the description of these files, the Factory Reset says its wipes all partitions and data including the Enterprise folder/partition and the Enterprise Reset does everything but that folder/partition. Zebra seems allow me to download everything but the Factory Reset file which is the one I assume I need to remove the Walmart branded stuff.
My question is, is it possible to manually wipe this partition and gain the same effect as the Factor Reset file? Bad idea maybe?
Any help would be appreciated
Click to expand...
Click to collapse
I'm not sure if this helps or is known but just in case its not , so messing around with the tc70 i found myself in setting and was able to view apps, create lockscreen , access camera ,view pictures etc... and actually delete/disable apps, I was able to disable EHS and any other app installed. In my excitement I accidentally deleted a wrong folder which caused tc70 to freeze on boot screen lol. long story short I would like to see what others may add to this glitch so if anyone is interested in this process LMK
Does anyone know if it is even possible to disable Walmart setup app from tc70 settings and if so anyone know of what app I need to disable/delete? As I said I can access settings and many other areas of device .. will pictures of the apps it has help ?
i have reset file for tc700
i need the other os files...the reset locks up bootloader with password but ill share if need be hmu
EBurton said:
After a lot of trying to get the enterprise reset out of Zebra I had no joy. These are simply locked up so tight that once the purchaser has registered the unit only they can gain software for them. Its a pretty good good for the purchaser as they know if one of there handsets go missing no one else can use it so it should deter theft of these expensive handsets but its unfortunate for people who legitimately buy a second hand unit. I had submitted the purchase invoice to Zebra showing the unit had been legally obtained but since it was still registered to another company they couldn't help me. There seems to be a lot of Royal Mail / Parcel Force handsets floating around... avoid them as you will never get it to work. One things for sure Zebra are no way as near helpful as Motorola used to be.
Click to expand...
Click to collapse
I'm actually looking for the walmart roms, as my co-worker bought a used TC70 that has been flashed for Home Depot, and wants to use it for Wal-Mart.