I recently bought a Zebra/Symbol/Motorola TC70 on eBay that is apparently from a Walmart and is seemingly locked down with a custom firmware. I did find firmware files and flashing instructions on Zebra's website. You are supposed to boot into recovery and flash the main image and then afterwards you flash one of two smaller zip files. One is designated as Factor Reset and one is Enterprise Reset. In the description of these files, the Factory Reset says its wipes all partitions and data including the Enterprise folder/partition and the Enterprise Reset does everything but that folder/partition. Zebra seems allow me to download everything but the Factory Reset file which is the one I assume I need to remove the Walmart branded stuff.
My question is, is it possible to manually wipe this partition and gain the same effect as the Factor Reset file? Bad idea maybe?
Any help would be appreciated
Installation instructions can be found here: https://www.zebra.com/content/dam/z...date Loader Image - Non-GMS Release Notes.pdf
TC70 Locked Down
Did you get any joy in downloading the software for the TC. I have one too thats locked down to a custom firms software that and the Zebra site wont allow me to download due to registration of the device being with someone else
Another TC70 here in need of an enterprise reset. I have no idea of its provenance so can't access the stuff on the Zebra website.
Going the whole hog, a non-enterprise reset would be even better and a KitKat GMR ROM image as well would be REALLY welcome!!.
Thanks for any help
After a lot of trying to get the enterprise reset out of Zebra I had no joy. These are simply locked up so tight that once the purchaser has registered the unit only they can gain software for them. Its a pretty good good for the purchaser as they know if one of there handsets go missing no one else can use it so it should deter theft of these expensive handsets but its unfortunate for people who legitimately buy a second hand unit. I had submitted the purchase invoice to Zebra showing the unit had been legally obtained but since it was still registered to another company they couldn't help me. There seems to be a lot of Royal Mail / Parcel Force handsets floating around... avoid them as you will never get it to work. One things for sure Zebra are no way as near helpful as Motorola used to be.
Hope I can help you guys out a little on this one....
Got access to all roms, etc from the Zebra web site and can get anything they offer as far as factory resets (enterprise and otherwise), roms and manuals. I am uploading the ones I already have downloaded for KitKat, Lollipop and MM. If you don't see what you need when I post the links (hopefully here shortly), PM me and I'll download it from the website for ya.
Stay tuned...
*EDIT*
Here is a link to my Dropbox folder with the files for the TC70. The other files I already have and full firmwares are still uploading (due to only having DSL access where I'm at it's going to take a few hours). Check the unit you have and the Zebra website to confirm versions needed, but I believe the latest two versions of the enterprise reset files are up and ready to download.
Again, PM me for specific versions needed.
*EDIT#2*
Link to the thread I started where you can discuss and request specific versions of firmware for your TC70/TC75 or any other Motorola/Symbol/Zebra device firmware.
bobtsunam said:
Hope I can help you guys out a little on this one....
Got access to all roms, etc from the Zebra web site and can get anything they offer as far as factory resets (enterprise and otherwise), roms and manuals. I am uploading the ones I already have downloaded for KitKat, Lollipop and MM. If you don't see what you need when I post the links (hopefully here shortly), PM me and I'll download it from the website for ya.
Stay tuned...
*EDIT*
Here is a link to my Dropbox folder with the files for the TC70. The other files I already have and full firmwares are still uploading (due to only having DSL access where I'm at it's going to take a few hours). Check the unit you have and the Zebra website to confirm versions needed, but I believe the latest two versions of the enterprise reset files are up and ready to download.
Again, PM me for specific versions needed.
*EDIT#2*
Link to the thread I started where you can discuss and request specific versions of firmware for your TC70/TC75 or any other Motorola/Symbol/Zebra device firmware.
Click to expand...
Click to collapse
Hi
I need the TC75 full ROM zip. Kitkat or lollipop version.
Thank You very much
Just bought a TC75 and looking for the firmware. No luck yet but will keep trying and post if I find anything
Chris
Sent from my Swift 2 Plus using Tapatalk
bobtsunam said:
Hope I can help you guys out a little on this one....
Got access to all roms, etc from the Zebra web site and can get anything they offer as far as factory resets (enterprise and otherwise), roms and manuals. I am uploading the ones I already have downloaded for KitKat, Lollipop and MM. If you don't see what you need when I post the links (hopefully here shortly), PM me and I'll download it from the website for ya.
Stay tuned...
*EDIT*
Here is a link to my Dropbox folder with the files for the TC70. The other files I already have and full firmwares are still uploading (due to only having DSL access where I'm at it's going to take a few hours). Check the unit you have and the Zebra website to confirm versions needed, but I believe the latest two versions of the enterprise reset files are up and ready to download.
Again, PM me for specific versions needed.
*EDIT#2*
Link to the thread I started where you can discuss and request specific versions of firmware for your TC70/TC75 or any other Motorola/Symbol/Zebra device firmware.
Click to expand...
Click to collapse
Hey I need the T700HKXXXREENxyyzz.zip file for the symbol Tc70 thank yu
bobtsunam said:
Hope I can help you guys out a little on this one....
Got access to all roms, etc from the Zebra web site and can get anything they offer as far as factory resets (enterprise and otherwise), roms and manuals. I am uploading the ones I already have downloaded for KitKat, Lollipop and MM. If you don't see what you need when I post the links (hopefully here shortly), PM me and I'll download it from the website for ya.
Stay tuned...
*EDIT*
Here is a link to my Dropbox folder with the files for the TC70. The other files I already have and full firmwares are still uploading (due to only having DSL access where I'm at it's going to take a few hours). Check the unit you have and the Zebra website to confirm versions needed, but I believe the latest two versions of the enterprise reset files are up and ready to download.
Again, PM me for specific versions needed.
*EDIT#2*
Link to the thread I started where you can discuss and request specific versions of firmware for your TC70/TC75 or any other Motorola/Symbol/Zebra device firmware.
Click to expand...
Click to collapse
hi
I can not download the T51N0M3XCPUEF01203.zip file from their site.
can you help me thx
Request
Hi,
I just found this thread trough Google.
And i was wondering if you could still access the files on the Motorola site.
Because file: T70N0LXXVRGEF21002.zip is the latest, but is missing the GMS certification.
something i think is needed/handy for using the Google Playstore on updates.
Or if anyone knows where i can get the updates, please let me know.
Edit: the correct 'GMS enabled' firmware should be: T70N0LXXARGEF21002.zip,
and it seems to need update file: 'T70N0L50ARPEF21002.zip'
and Lifeguard? updates?
new info
Mohdennisnl said:
Hi,
I just found this thread trough Google.
And i was wondering if you could still access the files on the Motorola site.
Because file: T70N0LXXVRGEF21002.zip is the latest, but is missing the GMS certification.
something i think is needed/handy for using the Google Playstore on updates.
Or if anyone knows where i can get the updates, please let me know.
Edit: the correct 'GMS enabled' firmware should be: T70N0LXXARGEF21002.zip,
and it seems to need update file: 'T70N0L50ARPEF21002.zip'
and Lifeguard? updates?
Click to expand...
Click to collapse
Hi,
I have bought an usb/charge cable for the TC70.
and it actually charges also without an adapter attached to it.
but on-topic,
I also see its 'protected' with Soti.
And i was wondering if you have an Factory Wipe image.
Because when i applied the Full Software Update, It forces the install of the Soti protection also,
rendering it kinda unusable.
But you can get more acces tough the on/off button in terms of connectivity, light settings.
The way to reset these is to put the reset *.zip file on the micro sd card, turn the device off, then hold down the lower button on the left hand side marked with a yellow stripe while holding the power key. It will boot into recovery, select install update from external sd card using the volume keys, then use the top left side button to select the zip. I have a TC70 wifi version and I need the latest update T70N0LXXARGEF21002.zip which you just cannot find or get anywhere. Everything works fine on mine except wifi, I need the wifi config .bin file I believe. PLEASE PLEASE PLEASE if anyone has these files or has access to them can they download them and upload to a file sharing please.
nokiaman2002 said:
The way to reset these is to put the reset *.zip file on the micro sd card, turn the device off, then hold down the lower button on the left hand side marked with a yellow stripe while holding the power key. It will boot into recovery, select install update from external sd card using the volume keys, then use the top left side button to select the zip. I have a TC70 wifi version and I need the latest update T70N0LXXARGEF21002.zip which you just cannot find or get anywhere. Everything works fine on mine except wifi, I need the wifi config .bin file I believe. PLEASE PLEASE PLEASE if anyone has these files or has access to them can they download them and upload to a file sharing please.
Click to expand...
Click to collapse
i know how to reset it.
but i need the reset file, just like i asked...
and to me, the 'latest' OS file is t70n0lxxargef02002.zip
findable that is
TC510K
Hello can you please help me find the factory reset update file for the TC510K please. It says that I need the file T51N0M3XCFREF01203.zip but I can not gain access to it because ".the access is restricted but free.
To get the system image, you need to contact the Motorola support, as stated on the support site:" Please help . Thank you!
bobtsunam said:
Hope I can help you guys out a little on this one....
Got access to all roms, etc from the Zebra web site and can get anything they offer as far as factory resets (enterprise and otherwise), roms and manuals. I am uploading the ones I already have downloaded for KitKat, Lollipop and MM. If you don't see what you need when I post the links (hopefully here shortly), PM me and I'll download it from the website for ya.
Stay tuned...
*EDIT*
Here is a link to my Dropbox folder with the files for the TC70. The other files I already have and full firmwares are still uploading (due to only having DSL access where I'm at it's going to take a few hours). Check the unit you have and the Zebra website to confirm versions needed, but I believe the latest two versions of the enterprise reset files are up and ready to download.
Again, PM me for specific versions needed.
*EDIT#2*
Link to the thread I started where you can discuss and request specific versions of firmware for your TC70/TC75 or any other Motorola/Symbol/Zebra device firmware.
Click to expand...
Click to collapse
Files
jimmyhieuphan said:
Hello can you please help me find the factory reset update file for the TC510K please. It says that I need the file T51N0M3XCFREF01203.zip but I can not gain access to it because ".the access is restricted but free.
To get the system image, you need to contact the Motorola support, as stated on the support site:" Please help . Thank you!
Click to expand...
Click to collapse
I cannot find these files ANYWHERE without being asked questions by symbol, most of these scanner come from supermarkets and are ex contract but are still tied in zebras database to a contract so they will not release the files to you under any circumstance. This is really frustrating, the original guy bobtsunam who provided the dropbox folder has not been online since august so I think we are screwed.
Dear me, I am in a massive discussion with zebra/symbol support trying to get this file, they suggested I download it, I told them I couldnt, they now want the unit sent in to them.......this is going to be a long thread over a zip file....
anumeric1122 said:
I recently bought a Zebra/Symbol/Motorola TC70 on eBay that is apparently from a Walmart and is seemingly locked down with a custom firmware. I did find firmware files and flashing instructions on Zebra's website. You are supposed to boot into recovery and flash the main image and then afterwards you flash one of two smaller zip files. One is designated as Factor Reset and one is Enterprise Reset. In the description of these files, the Factory Reset says its wipes all partitions and data including the Enterprise folder/partition and the Enterprise Reset does everything but that folder/partition. Zebra seems allow me to download everything but the Factory Reset file which is the one I assume I need to remove the Walmart branded stuff.
My question is, is it possible to manually wipe this partition and gain the same effect as the Factor Reset file? Bad idea maybe?
Any help would be appreciated
Click to expand...
Click to collapse
I'm not sure if this helps or is known but just in case its not , so messing around with the tc70 i found myself in setting and was able to view apps, create lockscreen , access camera ,view pictures etc... and actually delete/disable apps, I was able to disable EHS and any other app installed. In my excitement I accidentally deleted a wrong folder which caused tc70 to freeze on boot screen lol. long story short I would like to see what others may add to this glitch so if anyone is interested in this process LMK
Does anyone know if it is even possible to disable Walmart setup app from tc70 settings and if so anyone know of what app I need to disable/delete? As I said I can access settings and many other areas of device .. will pictures of the apps it has help ?
i have reset file for tc700
i need the other os files...the reset locks up bootloader with password but ill share if need be hmu
EBurton said:
After a lot of trying to get the enterprise reset out of Zebra I had no joy. These are simply locked up so tight that once the purchaser has registered the unit only they can gain software for them. Its a pretty good good for the purchaser as they know if one of there handsets go missing no one else can use it so it should deter theft of these expensive handsets but its unfortunate for people who legitimately buy a second hand unit. I had submitted the purchase invoice to Zebra showing the unit had been legally obtained but since it was still registered to another company they couldn't help me. There seems to be a lot of Royal Mail / Parcel Force handsets floating around... avoid them as you will never get it to work. One things for sure Zebra are no way as near helpful as Motorola used to be.
Click to expand...
Click to collapse
I'm actually looking for the walmart roms, as my co-worker bought a used TC70 that has been flashed for Home Depot, and wants to use it for Wal-Mart.
Related
Tried to make a copy of my ROM to SD Card. Dialog Box shows it copying but after completing in 6mins or so nothing shows on the card. I want to back up prior to copying XDA ROM and unlocking. Any advice would be appreciated.
well
you dont really need to save it on your sd card. You can just back it up in a file on your pc. click the browse button beside the combo box(ie the button with 3 dots) and select a name and a path. it would transfer the os to your pc and u can keep the back up there where its safer. :wink:
Thanks for your reply. Unfortunately I've already tried that and I just get an error message - Unsupported target filetype - don't know how to write destinationfile c:\Program Files\etc...
well
okay this is what you'll do :: put this line in the destination "c:\rom\os.nb1"; for the source select the combo box then select from device and it should work. if it doesnt then reply me asap. :roll:
Thanks again but unfortunately entering c:\rom\os.nb1 in the destination dialog didn't work. It returned: error opening c:\rom\os.nb1 for writing. The system cannot find the path specified. error opening target device.
Well
PS. Should also add I didn't quite understand your reference to "for the source select the combo box then select from device and it should work. if it doesnt then reply me asap
Well
PS. Should also add I didn't quite understand your reference to "for the source select the combo box then select from device and it should work. if it doesnt then reply me asap
check the image i just sent u. ull see what i asked you to click for the source.(Device Memory (current rom))
then for the destination clikc the 3 dots on its side and type in a name eg os.nb1 and lcick open. :!: :?:
Cool
Thanks, man. It looks like that's done the trick. It's currently copying. Once that's done I believe I need to load the XDA ROM to facilitate the unlock. Many thanks for your help.
David
no probs men. but i need to unlock some 2 more phones an am having a hell of a time. my bros samsung e700 and my dads hp6315. do u by any chance know how i can get that done
I wish I could reciprocate but unfortunately I don't know much about my Wallaby let alone those you've mentioned. I've just downloaded the XDA ROM and my device is not accepting it. Reading stuff on the forum to try to figure out what the problem is. Don't want to take away from your other problems with the Samsung and HP but let me know if you've heard of any problems as to why a device won't accept the XDA ROM. I'm probably doing something wrong.
Cheers for now.
okay i see you really do not know much. now all you have to do is get the special edition rom u get. then use the same program u used to backup your rom to upload the new one. i really want you to be 100% sure you have a back up. then duplicate the back up for safety reasons. Then extract the speacial edition rom. if its just the rom u got the use the program to do it. if its the whole installation u got a progamm called PROGRAMME A should open and it will guide you throught. Then i hope your phone is a wallaby/qtek 1010/ o2 xda/tmobile MDA they are all the same. else your better stop now. then why dont you lets chat i think it had be easier. yahoo ::nowoxi or msn ::[email protected]
Unfortunately, I haven't IM loaded currently. However, what you told me is a big help. I do have the MDA version of the phone so I'll try that when I get back as I have to leave right now. Thanks again and I'll keep you posted as to how it works out.
Hi nowoxi,
got a problem with OSImageTool, I did my own ROM copy but now how can I upload it to my device in case of need(mine is 2020..)? Do I need a SD card or I can do it directly from the xda image program? Many thanks
P.S. if you find a Yahoo mess request,well...it's me!
Didnt really get your compostition. I dont know where to start from or what to think. I know you have a problem and i know its with the ostool but i really dont get (understand) what your problem is. The rom u said u have. is it one you cooked up or the one on your phone before. then wher edo u wanna send stuff to. your phone or you wanna backup the one on your phone :?:
Sorry for the confusion, here's the story.
I'm the owner of an Orange SPV m1000, I received it last week and don't know much about PocketPC....my device is an English version, I'd like to convert it to an Italian one. I found an ITA ROM (it's for Qtek 2020 but it should work..) and soon I'd like to try to flash it. In case of need (maybe something wrong in the flashing...) I'd like to keep a copy of the original ROM installed in my device so I used XDAtools to get one, as you explained in this thread. Now I have this .nb1 file in my pc and the question is: can I upload it from my pc directly in case something goes wrong during the upgrade flashing? Or should I copy the .nb1 file to the SD card first and then try to flash from it ( but in what way?) ? Hope to made it clear now, thanks to your help!
P.S. Still looking the forum for a guide on using the imagetool....please be patient :wink:
Well you can restore it directly from your pc. just follow the steps in the thread. for source instead of selecting something in the combo box. click the 3 dots at the side then use your phone as destination. i hope that helps you out.
Sure thing!
Just one more question: what happen after I have finished upload the .bf1 file to my device with imagetools? It's a kind of autostart procedure or do I have to make some move? Thanks again, bye from Italy
nowoxi
I'm back and about to try to load the XDA ROM based on your instructions. However, question: do I have to removed the existing ROM from my device or will the XDA ROM simply overwrite it?
Hope you're around this Sunday evening/Monday morning!
Cheers
The rom will be overwritten.
I SimUnlocked my phone using way maxrfon found a way around SE security. I went to x10unlocked.com and downloaded the program there and unlocked the phone. As far as I could tell the only time the software ever accessed the internet was to check if my login information was accurate as far as I could tell. So in the program there must be a way to see how it unlocked sim going through the security of SE, which is also applicable to bootloader unlock.
As a side note...there is a folder in the software folder that is titled loader...and in there, there is like a few .sin files that the program supports...and one of them is x10.sin, it is very small about 86kb. I don't know about programming or anything close to it. I though someone/developer might look into this and figure out how the program does this and then it could be used to bootloader unlock our phones.
Any thoughts/ideas.
how did you get the username & password? cause it won't let you go through without username & password ?
x10unlocked.com is where you download the program. You don't need to type in a username and password...The link is in the top of the page
Latest Client Version: 50.04 (12-07-2011)
Download Count: 9189
Download Latest Client Install 50.04
click on the last sentence... Download Latest Client Install.
When you install it and you are about to sim unlock your phone...you have to enter in a username and password...and that you have to buy. IF you do buy a sim unlock code what it does is unlocks your phone and it didn't install anything extra afterwards...so i am assuming all the files needed to unlock bootloader should be there without the necessity to buy an account. Of course you would need skills to reverse all that stuff.
i tried but it says check login'. where do i buy it from it doesn't say on the website?
Oh wow that is weird...it lets me download no problem... and i have no idea where to buy it...i got my account for free. maxrfon posted a few free a little while back but that post got deleted. IT should download. Why do you want to buy it...
Download Latest Client Install 50.04
direct link to download, works for me no problems
I deleted the post causeit had exactly nothing to do with gingerbread and was in the wrong place
so posting it in another wrong place isnt helping
My bad...general seemed like a nice place talk about it...sorry, but thank you for not deleting it.
Hey y'all,
I have a customer with a google nexus 4, at least he thought so when he bought it from someone. After opening the package all the descriptions belonging to the phone where in chinese, which is weird but it still could bw a chinese produced phone. When googling the kernel number and discovering there was no play market nor support for google accounts I decided the device was a fake chinese piece of crap.
But forget all of the above, I found a way to install gapps anyway on this fake device, by just pushing all the folders of the flashable zip to the device, see the script I mirrored with DropBox. Unpack the script to some folder on your desktop and make sure usb debugging is turned on on your device. Then click install_gapps.bat and reboot your phone after the script is finished if it doesn't do this by itself.
I implemented the gapps for ICS-4.0.x, but if you want to install another gapps just place the "system" folder of the zip in de folder you just unpacked. In the script you can change wat you want to be pushed to your phone, the part which enables google accounts on your phone is located in system/lib I believe but I'm not sure so mod the script the way you want. The way it is now, it will enable google accounts
After this the phone has become a practically genuine nexus 4, with the exception is has different hardware and can't receive updates .
Please come back here for troubleshooting, I will try to help.
Hit the thanks button if this helped. If you even want to donate, you can go here: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=URRJAZ77AD4MG
Mirror 1:
https://dl.dropbox.com/u/49462631/install_gapps_fake_nexus_4.zip
We need a sub forum for the Fake N4 I guess
Ehhrrm, whaat? This probably belongs somewhere else mate..
Why would people even bother using a fake n4?
1: send it back for a refund
2: if refund is not an option then throw it in the bin
3: buy a genuine N4!
Problem solve
Why is this in the forums? This isn't development.
I have a zebra tc51.
I have all the images roms , reset files etc
Iv been trying to root the device for such time
Iv tried it on android 6.0.1 and android 7.0.1
Unsure if it's possible to root or allow much via the update.zip ( images of the device ) using there update-script
Reasons , debloatware it, we use our devices to emulate NFC to access doors etc for the functions we need , we change a lot of the operating system on our other devices to have. Better user function and ease of access , some functions and features of our software we run don't work due to having no access to parts of the system we have a device we can hardly use I have a another device with 5.0.1 from zebra but it's a older one that is rooted but it dose not have the hardware support we have
If someone is happy to help me unlock this device I'm happy to help pay some kind of support for your effort or send you a old zebra m40 something (haha)
But endless web hours on this topic for me , been looking at editing the update.zip
And allowing root support but I'm unsure
It's going on eBay shortly
TC51
I have a zebra tc 51 and tc70, both of which I have to unlock/reset to factory. Could you provide me with the files you have for your tc51? It would be greatly appreciated.
Zebra TC51
Could you please send me the reset files and firmware i would greatly appreciate it?
TC51 HELP!!! Please
Can you please share the TC51 reset file please?
Tc51
nobullv said:
I have a zebra tc51.
I have all the images roms , reset files etc
Iv been trying to root the device for such time
Iv tried it on android 6.0.1 and android 7.0.1
Unsure if it's possible to root or allow much via the update.zip ( images of the device ) using there update-script
Reasons , debloatware it, we use our devices to emulate NFC to access doors etc for the functions we need , we change a lot of the operating system on our other devices to have. Better user function and ease of access , some functions and features of our software we run don't work due to having no access to parts of the system we have a device we can hardly use I have a another device with 5.0.1 from zebra but it's a older one that is rooted but it dose not have the hardware support we have
If someone is happy to help me unlock this device I'm happy to help pay some kind of support for your effort or send you a old zebra m40 something (haha)
But endless web hours on this topic for me , been looking at editing the update.zip
And allowing root support but I'm unsure
It's going on eBay shortly
Click to expand...
Click to collapse
Could you please share the TC51 firmware with me?
reset TC51 is possible
I reset TC 51 successfully a week ago. Just go to zebra site under support for mobile computers and then into android 6 OS and the third "+Full Image"
and download: Atlas_Ent_Reset.zip. place in a FAT32 SC card in root dir, hold down power and scan (top left) buttons concurrently til logo. Select flash via SC card and hit power. 6 min later, full reset to all default apps.
Need that firmware plz
Could you please share the TC51 firmware with me? Is thus working
Frankendex666 said:
Could you please share the TC51 firmware with me? Is thus working
Click to expand...
Click to collapse
Hi, Sorry for not being more clear regarding the file I mentioned above. The reset file I stated to download and flash to phone is not a firmware image for the TC51. It is a file that when applied to the phone via updating from the SD card. It is instructions to the phone to commanding it to hard rest itself. It is a very small file, I dont remember, but I think like 15mb, whereas firmware img files are far larger.
The are to versions, one being enterprise - it will reset with enterprise partition not being wiped and the non enterprise reset file will wipe all.
8 or so minutes later, you will have a TC51 booted into its default state, apps and all. Any passcodes locking it are cleared. The above enterprise/nonenterprise reset files are available for google services or none.
Once you click the one of the full image "+" symbols to expand the subtree, you will see the files I mention. You will also see the full image files you are asking about but you cannot download them without permission.
Sorry for the long msg, but one last point is, the small reset files that do not require password verif to download, I guess basically the phone is reset as if the stock rom was reflashed to it, but without the img flash. I did this week ago and works well. I am new to this forum, joining only to state the easy reset of the TC51 and have not seen any rules as to what types of uploads are permitted here, if all cool, I can upload the files here.
Hello
I am also in need of the 6.0 or 7.0 firmware pls nd thank u
My guy you are freaking money. I have been trying to unlock mine for like a year and have constantly gotten stumped.
Thanks very much for the help. Sending massive good juju your way.
jrgram said:
Hi, Sorry for not being more clear regarding the file I mentioned above. The reset file I stated to download and flash to phone is not a firmware image for the TC51. It is a file that when applied to the phone via updating from the SD card. It is instructions to the phone to commanding it to hard rest itself. It is a very small file, I dont remember, but I think like 15mb, whereas firmware img files are far larger.
The are to versions, one being enterprise - it will reset with enterprise partition not being wiped and the non enterprise reset file will wipe all.
8 or so minutes later, you will have a TC51 booted into its default state, apps and all. Any passcodes locking it are cleared. The above enterprise/nonenterprise reset files are available for google services or none.
Once you click the one of the full image "+" symbols to expand the subtree, you will see the files I mention. You will also see the full image files you are asking about but you cannot download them without permission.
Sorry for the long msg, but one last point is, the small reset files that do not require password verif to download, I guess basically the phone is reset as if the stock rom was reflashed to it, but without the img flash. I did this week ago and works well. I am new to this forum, joining only to state the easy reset of the TC51 and have not seen any rules as to what types of uploads are permitted here, if all cool, I can upload the files here.
Click to expand...
Click to collapse
May I request these Files As well Thank you feel free to dm or email me links : [email protected]
I have a frp Locked zebra tc510k-1pazu2p-us
I am interested in unlocking and rooting my TC-51 as well. Could you please PM me a copy of this file?
tc51 said:
I am interested in unlocking and rooting my TC-51 as well. Could you please PM me a copy of this file?
Click to expand...
Click to collapse
I think I may have misunderstood. I thought these files were for rooting. Not just for resetting. It will still be nice to get a copy of them though.
request help in reseting Motorola Zebra TC51 back to default, aswell as root or TWRP, need to bypass/remove mobicontrol been to long and forgot admin password Thank You all help appriciated i know it's an old thread but it's a $2k PDA i need to revive it.
EDIT!!:
jrgram said:
I reset TC 51 successfully a week ago. Just go to zebra site under support for mobile computers and then into android 6 OS and the third "+Full Image"
and download: Atlas_Ent_Reset.zip. place in a FAT32 SC card in root dir, hold down power and scan (top left) buttons concurrently til logo. Select flash via SC card and hit power. 6 min later, full reset to all default apps.
Click to expand...
Click to collapse
ThankYou so much JRGRAM you saved me!!! let me refine his steps that i used to perform a reset
Step 1: Download Atlas_Ent_Reset.zip from Just go to zebra site under support for mobile computers or search "TC51" and look under downloads
Step 2 : Place the .ZIP you downloaded on a micro sdcard
Step 3 Place on Root of sdcard
Step 4: Hold down power and scan (top left) buttons consecutively recovery menu shows up.
Step 5: Select flash via SDcard let it finish then click reboot option.
Step 6: PROFIT!! now you back to stock firmware also gets rid of Soti MobiControl!!
nobullv said:
I have a zebra tc51.
I have all the images roms , reset files etc
Iv been trying to root the device for such time
Iv tried it on android 6.0.1 and android 7.0.1
Unsure if it's possible to root or allow much via the update.zip ( images of the device ) using there update-script
Reasons , debloatware it, we use our devices to emulate NFC to access doors etc for the functions we need , we change a lot of the operating system on our other devices to have. Better user function and ease of access , some functions and features of our software we run don't work due to having no access to parts of the system we have a device we can hardly use I have a another device with 5.0.1 from zebra but it's a older one that is rooted but it dose not have the hardware support we have
If someone is happy to help me unlock this device I'm happy to help pay some kind of support for your effort or send you a old zebra m40 something (haha)
But endless web hours on this topic for me , been looking at editing the update.zip
And allowing root support but I'm unsure
It's going on eBay shortly
Click to expand...
Click to collapse
Were you ever able to get root access? I am in the same boat, I have reached out to Zebra for assistance in unlocking the bootloader but they have not responded.
I did search in the software license which (according to their site ) says:
For instructions on how to obtain a copy of any source code made publicly available by Zebra related to Open Source Software distributed by Zebra, you may send your request in writing to:
Zebra Technologies Corporation
Open Source Software Director
Legal Department
3 Overlook Point
Lincolnshire, IL 60069 USA
In your request, please include the Zebra Product name and version, along with the Open Source Software specifics, such as the Open Source Software name and version.
Click to expand...
Click to collapse
I have not written to them on this matter through snail-mail. Perhaps that is the next step. As an indie dev its was hard enough to get access the the software revisions. I had to jump many hoops and it took over 6 months to get access the GMS and non-GMS versions for Marshmellow, Nougat, and Oreo.
Factory reset
File on MEGA
mega.nz
Enterprise
File on MEGA
mega.nz
0ddtizm said:
Ripristino delle impostazioni di fabbrica
[URL unfurl = "true"] https://mega.nz/file/QmhTFY6S#48AAiluKHBKCDcuP6GoBXvifM53GggeFGgCk4eid7dg [/ URL]
Enterprise
[URL unfurl = "true"] https://mega.nz/file/oq4HnC5S#c42gr3WXwk2jSMU-qCI2UYeyq5Rq_-QStlJSLdLJLy4 [/ URL]
Click to expand...
Click to collapse
ciao potresti ri mettere i link di mega graziee
0ddtizm said:
Factory reset
File on MEGA
mega.nz
Enterprise
File on MEGA
mega.nz
Click to expand...
Click to collapse
hi mr .please i need this firmware.
HI EVERYONE .Hope you are doing well. I really need that zebra TC51 firmware .
vickarim said:
HI EVERYONE .Hope you are doing well. I really need that zebra TC51 firmware .
Click to expand...
Click to collapse
Could you please share the TC51 firmware with me if you will have it
i know theres a thread like this but to up it i just want to make a new one...
does anyone here as of now know how to crack/root this box? i want to install apk's specially KODI in my stb... or does anyone have the update.zip file pulled from thier stb? if yes pls can u provide me the link? i tried to used this update.zip from recovery mode to revert back which play store is still available and other stuff, but after i update it the box started to update itself automatically i thought its part of reverting back but its updating to the latest software. i tried to do it again via recovery but the update.zip file are no longer available, seems its one time use only.
so anyone as of now have time to crack or know how to crack this pls post some tutorial. any suggestion also is much appreciated. TIA!
Ec6108v9 root
hi
there is a way , u can use google translate (not tested yet)
google : 最新上海电信华为EC6108V9破解 root教程
how to pull this file ( Update.zip ) out from my device ,
i want to help but i do not know how to pull it out