Hi all,
I stumbled across a post i can no longer find. So here goes...
It said that you should only have certain elements together otherwise you get battery drain & overheating.
Any idea on the best Radio/Rom/TouchFlo i can get for this?
HTC Touch Dual (20 key version)
TouchFlo V2.0 (1917.1723)
Rom 2.09.405.1
Radio 1.65.28.25
Niki100
SPL-1.22.0000
CPLD-4
Thanks
Ok so being a total twonk i should have read the Sticky's first and there it is!
"Nike and Neon Radios"
So i see the recommended Radio is 'RUU Nike Radio 1.58.21.23S Modded'. Is this best with a certain Rom?
Should i use HardSPL 1.22 or 1.15, which is best if i o with custom roms?
Anyone got Manila 2.0.1919 (or later version) working with Official HTC ROM?
Related
Hi all,
i-mate has this new WWE ROM on their web site
Rom version 1.31.305.2
Radio version 1.21.31.10
ExtROM version 1.31.305.104
JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.zip (53 MB)
it's also under
ftp://ftp.clubimate.com/
EDIT (pof):
jasjam ROM 1.31.305.2 on XDA-Developers ftp (wiki)
Radio 1.21.31.10 extracted (wiki | forum)
AKU ??
What AKU is it?
downloading and installing now- will update with rom specifics soon
tabackd said:
What AKU is it?
Click to expand...
Click to collapse
AKU 2.3..:-(
=====
Saar
does this still have the gawdy telstra boot-up screen?
This is the old Telestra rom date: 09/08/06 and which is available on the xda-developers ftp.
No new i-mate roms since then and it has the Telestra boot screen.
yes it's an old ROM but it doesn't have the Telstra boot screen.. well mine doesn't.
trialdei said:
does this still have the gawdy telstra boot-up screen?
Click to expand...
Click to collapse
No... 1st splash screen is HTC innovation, second is Imate.
so any ups to installing this rom>
I Had This Rom From The Day I Bought My Jasjam
From 1 Month Ego
Its Bad Rom Its Stack Allot And Very Very Slowly Many **** Inside
So I Update To Htc 1.35
I Think Its The Best
Im From Israel And All The Phones Came With This Rom
The Extended Rom Full Of Many Stuff Thats Make It Slow
Not Reccomand
Well, I have been using this Rom for 2 days now and have to report it is my favourite so far. No hang ups, no lost GSM or UMTS - no reboot needed so far.
Blackberry works flawlessly, and the whole phone feels faster..
install with confidence
It may be better than what you had, but the point is that it's not new.
My replacement JASJAM, which I received two months ago, already had this version installed.
i purchased my jasjam last week of december, and since it had the arabic rom, it was outdated. So i just upgraded to this and device is more stable now.
but i think i might switch to the cingular rom next week.
other rom
is there cooked roms for the hermes?
problem with new rom jasjam
i see every thing work very good with new rom
but when i make phone call the sound not clear i hear little noise
its not clear as it was
anybody got the same problem????
i have new rom with radio 1.27
and somthing else is plz!
is there in the wiki or somewhere that you wrote whats the diffrent between the regular aku to the aku 3.3 because i see only speed is good
nothing else cause i dont know what need to be change
Read this page on differences between the AKU levels.
New i-mate ROM?
I-mate seem to have an updated ROM avaliable and I was wondering if anyone has tried it and their thoughs on it.
Main Rom the same 1.31.305.2
Radio updated to 1.21. .... from 1.20
ExtRom updated to ... .104 from 103
I'm not a cooker - happy to stay with std ROMs (I burn water when I try to boil it).
This is the best ROM till now. Has some issues but better than the WM-6, WM-5 Qtek, etc. Need an urgent small polished upgrade from I-mate and this will be the best ROM with speed and all else perfect.
hsanghavi said:
This is the best ROM till now. Has some issues but better than the WM-6, WM-5 Qtek, etc. Need an urgent small polished upgrade from I-mate and this will be the best ROM with speed and all else perfect.
Click to expand...
Click to collapse
this is the release AKU 2.3 ROM from IMATE.. there is a newer version in the http://wiki.xda-developers.com
walshieau said:
this is the release AKU 2.3 ROM from IMATE.. there is a newer version in the http://wiki.xda-developers.com
Click to expand...
Click to collapse
Which version of I-mate if it is Telstra I cannot use it as we do not have that network here.
I check everyday on the wiki site but I-mate does not have any new version.
Please can you tell me whether you are telling about WM-6 other versions or the official version. If so please guide me to the exact location for the newer version.
Hello everybody!
Could someone tell me if it's possible (and how to do it) to upgrade only the radio part? And where do i get the 1.47 (the last one?)? Now I have an Advantage X7500 wm5 1.25 with radio 1.38.
Thank you for your time!
gtm55 said:
Hello everybody!
Could someone tell me if it's possible (and how to do it) to upgrade only the radio part? And where do i get the 1.47 (the last one?)? Now I have an Advantage X7500 wm5 1.25 with radio 1.38.
Thank you for your time!
Click to expand...
Click to collapse
I went to a combination of the 2.20 rom for x7500 plus radio stack 1.47 out of the x7501 by performing the follwing steps
1- Run OliPRO unlocker (all 3 steps!)
2- Flash to WM5 (you get radio 1.38)
3- Flash to WM6 x7501 (you get radio 1.47)
4- Flash to WM6 x7500 (radio 1.47 stays put)
Thank you!
I'll try your method.
Olipro or others, Possible to do separate installers for the Radio ROMs? I know they did this with the Wizard so that people could choose their radio independent of the ROM.
I'm having some trouble with one of the custom ROM's around here (not that it is not faster and richer than the original one but some applications are not working for me)
Could someone please help me revert to the original HTC 6.0 ROM?
I am using the 3.5SPL and so i guess this is why the HTC reflasher is not working
Also would radio version be a problem? I also have the latest radio version around; is this compatible with the old HTC 6.0 ROM?
Thanks !!
ubik said:
I'm having some trouble with one of the custom ROM's around here (not that it is not faster and richer than the original one but some applications are not working for me)
Could someone please help me revert to the original HTC 6.0 ROM?
I am using the 3.5SPL and so i guess this is why the HTC reflasher is not working
Also would radio version be a problem? I also have the latest radio version around; is this compatible with the old HTC 6.0 ROM?
Thanks !!
Click to expand...
Click to collapse
I don't think anyone has converted the official HTC 6 Rom to SPL3.5 but dheerajjuneja has slightly modified it
see here
http://forum.xda-developers.com/showpost.php?p=2414269&postcount=25
If you want to go to the official rom you would have to use the spl downgrader (see the sticky links)
I think the official Roms reflash the radio so it wouldn't matter what radio you had
Why dont you try AP3
It is a good Rom and my wife has never found a need to change it
http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=2417083
lakeman said:
Why dont you try AP3
It is a good Rom and my wife has never found a need to change it
http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=2417083
Click to expand...
Click to collapse
i've used AP3 before and it was a good rom.
But i'm trying to switch to something as plain and well tested as possible so that i stop having these random issues and incompatibilities (i'm on AP4 at the moment).
is there a way to revert the spl so that i can reflash the old rom?
thanks !
ubik said:
i've used AP3 before and it was a good rom.
But i'm trying to switch to something as plain and well tested as possible so that i stop having these random issues and incompatibilities (i'm on AP4 at the moment).
is there a way to revert the spl so that i can reflash the old rom?
thanks !
Click to expand...
Click to collapse
This is the link that Cmonex posted to downgrade SPL http://forum.xda-developers.com/showthread.php?t=405604 off the rom links sticky.
Honestly if you are having troubles you put yourself at risk of a few problems reverting and I don't think it is worth it.
Use the AP3 for spl3.5 that I linked above and you should be sweet.
Make sure you remove your cards and do a hard reset before and fter you flash to make sure you have flushed all the settings that may be causing you issues.
ubik said:
I'm having some trouble with one of the custom ROM's around here (not that it is not faster and richer than the original one but some applications are not working for me)
Could someone please help me revert to the original HTC 6.0 ROM?
I am using the 3.5SPL and so i guess this is why the HTC reflasher is not working
Also would radio version be a problem? I also have the latest radio version around; is this compatible with the old HTC 6.0 ROM?
Thanks !!
Click to expand...
Click to collapse
SOLUTION n.1
1) Revert back to spl 1.2 following the instructions posted here http://forum.xda-developers.com/showthread.php?t=405604
2) Flash any 1.2 ROM
3) Flash the original HTC ROM using SSPL as explained in the same thread
ALL (SPL, RADIO, OS, SPLASH SCREEN, EXT_ROM) will be the original HTC
SOLUTION N.2
Flash the WWE SPL 3.5 HTC Rom modded from IRUS http://forum.xda-developers.com/showthread.php?t=390328 or from
dheerajjuneja (modded also fro blackberry connect) http://forum.xda-developers.com/showpost.php?p=2414269&postcount=25
SPL will stay unchanged, the OLINEX 3.5
Well, earlier this morning while having SPL3.5 on my device i tried to reflash my Athena with the stock HTC WM6 ROM to see what happens; normally that didn't work and left me unable to boot
Now i tried the SPL Downgrader, but i need a running OS to do that.
So i went to the bootloader, and tried installing two versions of AP 3.0 that i have to get a running OKS... The ROMs install just fine, but i'm stuck in a reboot loop that keeps taking me trough the "tap the screen to start using windows" and the AP 3.0 automatic os customization
is there a way to stop that from the loop?
how do you proceed to carry on from now on?
Also, what are the ROMS that can be installed straight from the bootloader like AP3? Maybe another ROM with no ROM customizations and automatic reboot?
Later Edit: Tried the Irus HTC WM6 SPL 3.5 ROM from the bootloader screen and it seems to be installing...
Keeping my fingers crossed
PS: I'm trying to find a thread to find out more about what is a SPL, what does it have to do with the OS and the boot mechanism in WM, anybody know a good resource for that?
OK, It seems i got there; after the Irus ROM, i use the SPL Downgrader and than reflashed the original HTC ROM, and voila !
I seem to have got the HTC WM6 ROM with 1.50 RADIO.
What more do i have to do to get "all-stock"?
Should i use a vanilla SPL1.2 installer to restore the original SPL (i think i'm running the 1.2 OliPro right now)
as a matter of fact, is there any reason to restore the original SPL?
And... is Radio 1.75 better than the 1.50 in terms of WIFI stability? WIFI performance seems to be rather bad
i need rom for htc s711
i need rom original for htc s711 version of onbl 1.25.0000 spl 1.25.0000 cpld 04
Hi, I own a Spanish Touch Dual (nike with 20 keys) since January and have some free time this weekend and since quite a long time I want to change it completely (it even needs a hard reset as it works quite slow now). I have read about hardspl, sspl, new ROMs, Manila... where can I start? I wanted to install a 6.1 Rom but it says that I need a 1.65 or higher radio version, I wanted to install Manila 2D also.... can you please help me? where do I start? Radio-> ROM -> Manila? is there any "howto"? I am completly lost! My nike is:
ROM version: 1.31.412.09 (10/30/07)
Radio: 1.58.16.27
WM 6
Identity: Niki100
Thanks a lot!
First you need to unlock your phone.. you can find out how in this forum, its stickeyd! then you need to choose a rom, either one with or without mannila 2d installed already. the flashing process is really easy and its all explaind in readme's.
To unlock, as far as I have understood:
First HardSPL (http://forum.xda-developers.com/showthread.php?t=355730)
Second SuperCID (http://forum.xda-developers.com/showthread.php?t=395945)
Am I right?
Then go and try a ROM (I have downloaded a couple and no readmes, but I think its just a double click and go, right?). In the ROM is it included the Radio? I read about a ROM requiring to have already installed a >1.65 radio version, so I asume I have to install first a ROM.
Btw, which ROM do you suggest me with manila 2D and fast? Thanks a lot!
correct!
i'd flash a radio before a rom this thread; http://forum.xda-developers.com/forumdisplay.php?f=404 im using (RUU Nike Radio 1.58.21.23S Modded)
then i highly recommend the lilly rom at the moment! very smooth and responsive.
http://forum.xda-developers.com/showpost.php?p=2698902&postcount=4
I'd agree on that radio ROM; it's the one I'm using. I flashed to the LILLY ROM in my sig and then did the radio ROM - maybe that's the wrong way round, but it seemed to work!
Thanks a lot! Do u know if the Lilly ROM comes in several languages? (At least in Spanish)
hi
i want to know which is the lastest wm 6.5 rom ????
and also how to upgrade to 3.5 spl or whatever its called
and whats the benefit from 1.2 to 3.5 spl ?
thanks
Hello,
Before you get into flashing a WM6.5 rom you MUST read about it in the WiKi first about SPL's and why they differ. You ca screw up your device if you dont!
Regards
Jay
hi
thanks.. already upgraded to spl 3.5 oli ans radio 1.58 but still dont unerstand whats the difference b/w 1.2 and 3.5
zohaer21 said:
hi
thanks.. already upgraded to spl 3.5 oli ans radio 1.58 but still dont unerstand whats the difference b/w 1.2 and 3.5
Click to expand...
Click to collapse
SPL 3.5 partitioned about 20mb more memory to use for the Rom. So in other words AP 4.0 was to large to fit in the SPL 1.2 partition when it was finished, so Olinex developed SPL 3.5, and this robbed 20mb from the Program side (I think), to make room for it to fit. You can downgrade again to SPL 1.2 easy enough, but you must use the right rom with the right SPL. As a result you will find that some same roms (for example, Michy 4.1) comes in both SPL's the SPL 3.5 will have a few more bits of software in it or added UI.
Hope this helps
Jay