I have been trying some ROMS of this forum and in one of these my rw6815 did not start. The screen was black and it doesn´t started when I pushed the "on button".
Afterwards, I read lots of post and discovered that I could start bootloader mode with "camera+push battery". I tried to put again a stable ROM by using a SD card in this mode but when setup finished my pda show hp logo and restart.
I saw the bootloader versión was 0.00.00 so I decided to put BL 1.01 to recover my PDA. I did it using el bootloader mode and tried to install another ROM. This time I used the (-) buttos+reset+"on button". The HP logo was showed and it was a long long time... and never finished, so I decided to pull the battery. When I tried to star the bootloader mode with "camera+push battery" my PDA didn´t response. Now, it doesn´t start in this mode.
What can I do?
Oh, a strange thing I have noticed is that the hp logo and the bootloader mode seems to be interlaced... I mean, the screen is not clear, you can see something like a interlaced screen... It didn´t happen when I put in a stable ROM and the hp logo restart on start.
PD: Sorry for my English
PD2: I just have discover that if a push the two (-) buttos and put the battery the screen shows the hp logo and PBL 1.0.1
me too
Have you found solution for this?
Hai everybody, i am a new member to forums, so i am intereseted
and want to gain knowledge on this topics..........................thank u
Related
hi,
i've searched, and am stuck. i tried to flash a new ROM today, but it stopped at 76% and said no connection!?? i've flashed before with no problems many ROMs. I have HardSPL 1.15 mfg installed and everything always worked. Now i'm stuck at 4 color boot screen screen. HardSPL is still there, there is a message at top right saying 'RUUNBH'. I plug USB in and it says 'USB'. I run mtty but can't seem to get any CMD, or even type 'boot' in, no response on app, running on XP?
i'm reeally stuck, and had to come to work, so am worried. can anyone help??
sorry, i am still searching for solution, but please any help appreciated!!
thank you
i will try to check back often, but stuck at work might be problem ..
i got stuck at that boot screen too, but it happened during a boot image change operation. All I had to do was install a new rom.
Hope it helps...
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
badaas said:
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
Click to expand...
Click to collapse
Don't worry, you just need to get to the bootloader screen and flash again, you may have a corrupted update that may hault everytime. If it doen't work try another ROM.
Hold down power and the camera button while pressing and holding the reset button.
When you see the Boot Loader screen you can release all three.
Plug in your cable if it is not already, wait to make sure the computer installs the device and then run the ROM Update executable you want or ROMUpdateUtility.exe if everything is placed in a folder.
Note: Activesync and Mobile Device Center will not launch in this mode, and if the utility tells you to connect through activesync or Mobile Device Center ignore and continue.
OK thank you my friends, i will try when i get home from work. fingers crossed!!
cheers
thx guys, all sorted
Hello, dear xda users. I am kinda new in Android world- i bought HTC phone month ago and i tried to get used for it. My phone is polish version of T-Mobile G2 and its called ERA G2. I rooted it, installed Amon-Ra and tried a lot of custom ROMs. After month of using different kind of Android and HTC ROMs i stayed with RCMix 2.3, because of his speed and 2.1 Sense on it. And now my problem begins:
Today my menu button stoped working in some applications so i decided to reboot device. Everything went fine with getting off, but when phone vibrated and Era initializing screen appeared, nothing happened after that.
-I tried with removing SIM, SD and all other options but still it is frozen. After couple minutes its vibrating again and restarts.
-When i plug charger for turned off phone, charging led is on but at the same time i am turning on phone, led disappears (phone is still plugged to charger).
-I cannot go to recovery by holding Home+Power... nothing happens.
-When i am holding VOL Down and Power this unknown for me HTC/Android window appears but automatically starts some kind of loading, and when its in Simlock and opening FAT32 something it restarts and Era initialization screen is on again.
-Unfortunately i dont have any warranty for this phone and i am from Poland so professional technical support is the worst way of helping for me right now.
I really enjoyed HTC Hero and i want to enjoy it more, so please if you know any way or kind of solution, please reply ; ) [sorry for my english]
Do You have adb set up?
By nothing happends You mean it wont turn on, or it wont run recovery?
Sent from my Hero using XDA App
remove battery and put it back again. This will turn off the phone. Then try Power it up. Do you get into bootloop again?
What about recovery? Replace battery and power up into recovery. 2 things might happen. You can get into your recovery normally and reflash the rom. Or you might get a screen with a phone and a big red exclamation mark. In this case you've lost your recovery and need ruu install.
brat.haneq---> i ment that i cant go to recovery- i have initialization screen and nothing happens.
So, first of all i restarted my phone a lot of times in different combinations (with SIM, without SD etc.). I cannot get to recovery when i am pressing power+home buttons and nothing happens, no exclamation mark like arvan said. I just see blue initialization screen from Era (it says Era G2 Touch)as always. Normally after some seconds it dissapears and normal bootscreen from ROM shows up, but not this time. Any thoughts?
Oh, and what is adb set up? Cheers ; )
So I guess You've really lost the recovery.... And as I said, RUU install will help...
Okay, but how i can install RUU? I tried from PC but Windows doesnt see my device... Any other option?
have you got the drivers? they come with htc sence. what does your pc see instead of hero? there might be some unknown device in the device manager if it's a driver problem.
Install RUU form SDcard (extract ROM.zip from RUU, rename it to HEROIMG.zip and put it to root of SDcard) using HBOOT mode.
There's a guide explaining the steps here http://forum.xda-developers.com/showthread.php?t=714519
Hi guys,
I have an Aoson M30 (rockchip 3066) and it now won't boot to the home screen.
It Just turns on to the company logo boot up screen (which is normal) but stays at this screen. It flashes the pattern over and over so the processor is obviously still running .
It should then go to the home screen but just continues to flash the boot screen.
I tried to reload the firmware but the Rockchips batch tool doesn't work either. It sees the tablet but stays at "pink" on the indicator screen. It doesn't turn green (which it needs to) so the firmware will not transfer to the tablet.
I have reset via the reset button, flattened and recharged etc but it wont start up
.
I tried booting holding the volume + and power buttons and it comes up with an image of 2 penguins? Then it shows a vertical android bot for a second before showing one lying down with a " !" symbol above it.
I guess the firmware is corrupted but without the ability to reload I fear I may have a brick!!!!
Any ideas?
Cheers
Charlie in New Zealand
charlieenz said:
Hi guys,
I have an Aoson M30 (rockchip 3066) and it now won't boot to the home screen.
It Just turns on to the company logo boot up screen (which is normal) but stays at this screen. It flashes the pattern over and over so the processor is obviously still running .
It should then go to the home screen but just continues to flash the boot screen.
I tried to reload the firmware but the Rockchips batch tool doesn't work either. It sees the tablet but stays at "pink" on the indicator screen. It doesn't turn green (which it needs to) so the firmware will not transfer to the tablet.
I have reset via the reset button, flattened and recharged etc but it wont start up
.
I tried booting holding the volume + and power buttons and it comes up with an image of 2 penguins? Then it shows a vertical android bot for a second before showing one lying down with a " !" symbol above it.
I guess the firmware is corrupted but without the ability to reload I fear I may have a brick!!!!
Any ideas?
Cheers
Charlie in New Zealand
Click to expand...
Click to collapse
Hi,
i had the same problem some time ago and the way I solved it was by flashing again the original rom.
Your issue might be the driver installatin on the PC to recognize the tablet as a M30. I had to use an XP to be sble to install properly the RK3066 drivers.
Also try tomuse another usb cable. The one it comes with the tablet is quite patchy and I had to use a good quañity one.
Dont give up, if you ger the endless logo loop I dont think it is bricked.
Good luck.
Hi everyone, I have this weird problem with my S6500, or rather my younger brother has.
He tried to put on his S6500 (not D, this phone is with NFC) Cyanogenmod 10.1, after some ups and downs, he finally got it to work, but... camera wasn't working, it was said on the cyanogenmod page to flash with the newest update, he did that, phone worked good... almost, after he was blocking his screen, he couldn't unlock it, because there was some kind of white screen stuff, weirder was the thing, that he could hear all the *clicking* sounds as he was trying to unlock. He had to restart the phone every time after he blocked the screen, so he wanted the phone to function normally and tried to put his stock ROM back again. Well the flashing went well (as Odin showed) but the phone stucked in bootloop.
The phone showed the Orange logo (he is using his original stock rom from Orange Poland, downloaded from sammymobile) and then it quickly changed to Samsung logo, after that the phone vibrates once, and after that it vibrates 3 times really fast and restarts from the Orange logo.
He tried to get into Recovery mode, but coul;dn't (the phone doesn't react to any of the combinations we found - vol+,vol-, home and power and many others), and as I forgot to mention before, after every flash (while the recovery was working) he cleared data in menu of the recovery.
We also tried the different method to boot the phone into recovery mode (put it in Download mode, which works and then instead of going further by pressing vol+ we pressed the down button and held vol+,vol- and home button, but instead of going into recovery the phone booted in weird screen with small letters RAMDUMP MODE (ARM9 mode).
We tried several times to flash new recovery with Odin, but it doesnt work, the PIT file also doesn't work, or can someone provide me with the stock s6500 PIT file as I couldn't find one, because I read in the Polish forum, that screen mentioned before only shows up if there is a SuperUser app in the phone, so we need the PIT file to flush it.
So the problem is after flashing it with numerous cwm and original stock roms we couldn't get it to boot or to get into recovery menu, or get it working.
Also the hardware is all ok, as the phone is almost brand-new ( he got it from the Orange few months ago).
So help plz?
I have the very SAME problem with my S6500D. Same as described above.
Anyone has managed to fix this problem ? I have all needed tools.
As i have mentioned in the topic i have an old phone and its brand is so rare that i don't think i can find any solution and i dont really need to revive that phone but at least i wanted to give a try on this forum so, i have just created an account well. As i have mentioned its probably hard bricked and if you ask me how it hapened actually tried to install rom and it just failed so it does stucks on boot section just flushes android writing second by second. So it would be probably a reason of why it doesn't boot into fast boot etc. so it blocks the connection between the pc and phone but at least in download mode, pc can see the phone but not as an usb-disk just sees as a cable or something, i tried to install rom but failed because of "download mode" i think and i have tried to push all of the buttons it just flushes android writing except for trying both pressing volume up and down keys (which leads download mode i think) they just appears black screen and does nothing but it does let the computer sees it as something otherwise it wont be seen as a device in other boots. So im open for all of the suggestions. Thanks for at least giving some time to read that wall of text.