i just decided to flash my touch dual but i get to the bit of running spl 1.6 on the phone and a screen with coloured band appears but nothing else no usb icone etc. When i try and use hard spl it says the phone is not connected any help ?
rzlez7 said:
i just decided to flash my touch dual but i get to the bit of running spl 1.6 on the phone and a screen with coloured band appears but nothing else no usb icone etc. When i try and use hard spl it says the phone is not connected any help ?
Click to expand...
Click to collapse
hi pal
when the tri colour band appears after running hspl 1.22 on ur computer.disconnect sub cable from computer.u will c "serial" wriien on ur device.when it appears reconnect the sub cable. hspl 1.22 will be installed on ur device.after that u can flash any cooked rom.I hope ur device is already sim unlocked.
hope it helps u
regards
so should i just run hdspl 1.22 ? instead of using spl 1.66 ?
rzlez7 said:
so should i just run hdspl 1.22 ? instead of using spl 1.66 ?
Click to expand...
Click to collapse
u will have to have spl 1.66 on ur device.first run 1.66 on ur device,then only the above steps,as i had mentioned
regards
so when i run the spl and the triband screen appears i should just run hard spl 1.22 straight after ?
rzlez7 said:
so when i run the spl and the triband screen appears i should just run hard spl 1.22 straight after ?[/QUOTE
when u run hspl 1.22 the tri band will appear BOSS
hope u r clear now
Click to expand...
Click to collapse
ohh ill give it a shot thx
rzlez7 said:
ohh ill give it a shot thx
Click to expand...
Click to collapse
my pleasure Sir
regrds
Related
Hello!
I've tried to upgrade my S200 to the latest Touch version X. But something went wrong and after a reset, the screen freezes with the following information:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 10.0.0.0
"QTek, Keep the world in one"
How can I save my S200? Please help!
sanderschuringa said:
Hello!
I've tried to upgrade my S200 to the latest Touch version X. But something went wrong and after a reset, the screen freezes with the following information:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 10.0.0.0
"QTek, Keep the world in one"
How can I save my S200? Please help!
Click to expand...
Click to collapse
Relax first and it will work like this
1.press camera button and so a reset by pressing the stylus into the hole
now you should see a 3 color screen
2. conect you Prophet to you pc and note you will see a usb on the button of the screen of prophet
now run step 1 from pc
gullum said:
Relax first and it will work like this
1.press camera button and so a reset by pressing the stylus into the hole
now you should see a 3 color screen
2. conect you Prophet to you pc and note you will see a usb on the button of the screen of prophet
now run step 1 from pc
Click to expand...
Click to collapse
Thanks for your fast reply. What do you mean exactly with step 1 from PC?
sanderschuringa said:
Thanks for your fast reply. What do you mean exactly with step 1 from PC?
Click to expand...
Click to collapse
I think I'm getting somewhere...
Thnk you very much... I will donate you tonight!
Hello!
Still having problems. I have the three colored screen with numbres:
IPL 2.20.0001
SPL 2.20.0001
And also the USB sign, in the left bottom screen.
But whats the next step?
sanderschuringa said:
Hello!
Still having problems. I have the three colored screen with numbres:
IPL 2.20.0001
SPL 2.20.0001
And also the USB sign, in the left bottom screen.
But whats the next step?
Click to expand...
Click to collapse
you need to downgrade to wm5 and then to update do wm6 !!! there is a wiki for this job you know ...
zeroed said:
you need to downgrade to wm5 and then to update do wm6 !!! there is a wiki for this job you know ...
Click to expand...
Click to collapse
No, I didn't know... but thank you for the tip!
sanderschuringa said:
Hello!
Still having problems. I have the three colored screen with numbres:
IPL 2.20.0001
SPL 2.20.0001
And also the USB sign, in the left bottom screen.
But whats the next step?
Click to expand...
Click to collapse
have you done step 1 ..
you can try PDA Viet for step 1
http://rapidshare.com/files/72839727/Prophet_PV_Temp2.rar
be sure kind of your device...
First go to bootloader mode and then run pda viet temp..
Hope it works for you.
You are lifesavers! Touch X (Dutch) is now installing! many thanx!
sanderschuringa said:
You are lifesavers! Touch X (Dutch) is now installing! many thanx!
Click to expand...
Click to collapse
good ,if it's work now..
How do I update hardSPL to a new version? i currently have 1.16 and want to upgrade too 1.22
i tried using somthing called uspl but that didnt help it still says SPL 1.16 Hard on the bootloader
I have a HTC Touch Dual (Orange Branded - NIKI100)
That's not really difficult : just flash th 1.22 the same way you flashed the old one !
Launch the SSPL on your phone : you'll have the tricolor screen.
Plug it using your USB cable, and launch the RUU with the harsSPL NBH.
Antubis said:
That's not really difficult : just flash th 1.22 the same way you flashed the old one !
Launch the SSPL on your phone : you'll have the tricolor screen.
Plug it using your USB cable, and launch the RUU with the harsSPL NBH.
Click to expand...
Click to collapse
Thankyou! I been waiting all day for that!
HardSPL 1.22
HERE yuo can find the last HardSPL 1.22 lost in a too long thread...
Thank rling to have helped me to find it!
I have been rying to change it but it still shows:
NIKI100 MFG
SPL-1.15.Hard
CPLD-4
The "sspl-1.16-nike.exe" (the kemit icon, when on the phone) must be on the phone and executed from the phone itself (gives the tri-color screen). after that you can start the 1.22 exe from your PC and flash the spl as described.
Don't forget to backup first, remove storagecard and SIM before doing all this.
I upgrade my rom and now he stucks on de first screen when windows mobile show i do everything i can and i don no what do more
The multi port program give-me this error
Cmd>ls boo.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Is everything i can do to my gene come back to life???????
Please Help me
Do you already do a SPL unlock?
If yes, just flash with another ROM.
Go to bootloader by press and hold camera then reset, release reset but still hold camera untill tri color appear, connect usb cable to pc then flash again with another ROM.
How thing i have all ready done that?but show-me how i do to see if i done well
When im restarting the pda the information tha show is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
After that screen goes to windows mobile screen and stuck
But is i do the combinations of the power button and camera i go to the 3 colors screen but when i do a update the program go to 2 % and reset
Please help-me
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
@tonysucre do HSPL
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
tonysucre said:
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
Click to expand...
Click to collapse
haree said:
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
Click to expand...
Click to collapse
Can you give-me the link of the tutorial?
Tks
@haree
buddy you are wasting your time .
There is a thread named upgrading ... by krazy as well as a thread by vaibhav named automatic SPL Updater. Just search a bit, son.
or may be you can take the cell to haree who will patch it for you
I Have already tried that but the thing but i cant put thing in the memory phone only in the sd card
Help please
after upgrade to 6.5 screen showing windows mobile 6.5 onyl
I used SumitsProUsersROM_WM6.5_build21815_OldGene_Fixed to upgrade its struck at windows mobile 6.5 screen only nothing happening.
not able to flash again. Aslo want to note that while I was ugrading it shows me something like "sudden loss of power"
Pls help my phone is not working now.
thaks
recharge the battery for mare than 1 hour and try again
After 6 hours of trying to change spl to flash the rom i haven´t manage to do anything more ist´s exactaly the same that i have all ready i have download a lot´s o rom´s and nothing i have tried the to do updating the spl by the sd card and nothing happen because i can´t put anything in the memory of the phone i only can put thing in the card from my computers card reader to trying to change the spl to 1.10-Olipro to flash the rom but i can´t
I don´t no what i have do more?
please anyone with the same problem can help-me
Tks
what error are u getting while upgrading?
vaibhav_batra_the_techguy said:
what error are u getting while upgrading?
Click to expand...
Click to collapse
error 270
is the same that a told is star to upgrading and in the 2 % the phone restarts and give-me that error i thing is because spl is 1.7.0000 or not?
I just see i hav cid lock and and dont now i unlock ?any help
@tonysucre
see
below link as i had told u before u have not done HSPL
u go to the below links and save them on ur comp and Read no one is going to hand hold u and u dont need it with such nice tutes given pls not im a guy with Zero tech skills and i did it so u can as my boss would say its not rocket science
& i dont have any gene tools with me as i have upgraded to another phone (see my sign)
good luck
http://forum.xda-developers.com/showthread.php?t=513329
http://forum.xda-developers.com/showthread.php?t=472169
tonysucre said:
Help please
Click to expand...
Click to collapse
When I attach my niki in bootloader mode with my pc and the i try to do hardspl there comes white screen showing a bar 0% but it did not go ahead like other htc it stays on and after some time there come an error 262 saying this
the rom update utility has encountered a communication error during the update process........etc
i also acted step b step on the guidence of this program but in vain so plez help me how can i hard spl my niki to upgrade new rom ......plzzzzzzzzz
Nofear99 said:
When I attach my niki in bootloader mode with my pc and the i try to do hardspl there comes white screen showing a bar 0% but it did not go ahead like other htc it stays on and after some time there come an error 262 saying this
the rom update utility has encountered a communication error during the update process........etc
i also acted step b step on the guidence of this program but in vain so plez help me how can i hard spl my niki to upgrade new rom ......plzzzzzzzzz
Click to expand...
Click to collapse
if u have already spl 1.5 on ur device then,after runing hard spl 1.22,the moment u c the tri colour on ur device,take the data cable off from pc.when u c 'serial' on ur device,insert the cable again.the process will be complete.
regards
thanks to answer but same problem...
deepankerjha said:
if u have already spl 1.5 on ur device then,after runing hard spl 1.22,the moment u c the tri colour on ur device,take the data cable off from pc.when u c 'serial' on ur device,insert the cable again.the process will be complete.
regards
Click to expand...
Click to collapse
i can see on boot loader mode my spl is 1.16.0000
niki200 cpld-4
plzz tell me another solution
i will be thankful to u
Nofear99 said:
i can see on boot loader mode my spl is 1.16.0000
niki200 cpld-4
plzz tell me another solution
i will be thankful to u
Click to expand...
Click to collapse
is ur device sim unlocked?moreover i think u have already hard spl installed on ur device pal.
help me please bro,, i want hacked my htc hd 2 and first i flash with hspl in this
and susscessed,,
and next my step is flashing stock room and i download in this
Code:
4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
i download stock rom LEO 2.10 next my htc hd2 updating sudenly htc hd2 restart before finished update the screen after restart is triangle look like this pic
and i tried another stock rom but the screen like this
and im waiting but the loading never finished
this my tricolor
SPL 2.08 before i flash stock rom my spl 1.42
anything idea how to fix my htc hd2 problem ???
thanks for your help
The problem is with the spl. In order to flash roms that are not for your device you need hspl. Your spl is only 2.08.0000, you need to change this to 2.08.hspl.
ClydeB1 said:
The problem is with the spl. In order to flash roms that are not for your device you need hspl. Your spl is only 2.08.0000, you need to change this to 2.08.hspl.
Click to expand...
Click to collapse
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
****thefuckerz said:
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
Click to expand...
Click to collapse
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
****thefuckerz said:
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
Click to expand...
Click to collapse
thats correct
you must go into bootloader mode, start the the tool and then u can install it(push and hold volume down+turn on the phone)
ClydeB1 said:
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
Click to expand...
Click to collapse
ok i'll try bro thanks again for ur help...u have yahoo id bro?
****thefuckerz said:
ok i'll try bro thanks again for ur help...u have yahoo id bro?
Click to expand...
Click to collapse
Pleasure m8. No I don't. You can PM me though if you have more questions.
ClydeB1 said:
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
Click to expand...
Click to collapse
Thanks bro,,sucessfuly
what should i do now to hacked my htc hd 2 bro ?
****thefuckerz said:
Thanks bro,,sucessfuly
what should i do now to hacked my htc hd 2 bro ?
Click to expand...
Click to collapse
Load spl 2.08.hspl by running the hspl2 tool. Once that is successful (check in bootloader again to see that it has successfully installed) then you can flash to the rom of your choice.
hi pls help
hi i have same problem i did everything but for me it didnt work why i saw it worked for that guy pls help
loonyozzy said:
hi i have same problem i did everything but for me it didnt work why i saw it worked for that guy pls help
Click to expand...
Click to collapse
Enter bootloader and supply all of the info you see there.
Actually you can't do much wrong. just connect the to your pc and then use the brilliant hspl2 to hack your spl on the phone, and then you can reflash the rom....
I have had same symptoms, tried everything... then....
Finally I have noticed that I can't flash through USB because on my micro-sd card I have placed LEOIMG.nbh which caused HSPL error 0028002
Before you flash remove micro-sd.
I hope my experience will help.
SAME problem no resolution
HI I have same problem Screen with exclamation mark then boot screen with gour colours showing this
HX-BC
SPL-1.42.0000 XE.
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
So I've tried to install HSPL 1.42 With no card inside but during installation i get.
Download http://forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
1. Remove micro SD card.
2. Reboot phone while holding volume down.
3. Connect to the PC via USB.
4. Run HSPL2_RUN.exe and follow the steps on your screen
Same problem
Hi, I have also this problem. I tried to install the stock rom but during it an error occured and it stopped before finished. Then there is the triangle and "software update failed". My spl says that I have the version 3. and something and also when I try to run the hspl.exe an error occurs that says that a file RAPi.dll cannot be found and then it waits for usb connection and finaly an error occurs "cannot connect".
Please could someone help me ? WHat am I doing wrong ? Or what should I do ?
thanks