How do I update hardSPL to a new version? i currently have 1.16 and want to upgrade too 1.22
i tried using somthing called uspl but that didnt help it still says SPL 1.16 Hard on the bootloader
I have a HTC Touch Dual (Orange Branded - NIKI100)
That's not really difficult : just flash th 1.22 the same way you flashed the old one !
Launch the SSPL on your phone : you'll have the tricolor screen.
Plug it using your USB cable, and launch the RUU with the harsSPL NBH.
Antubis said:
That's not really difficult : just flash th 1.22 the same way you flashed the old one !
Launch the SSPL on your phone : you'll have the tricolor screen.
Plug it using your USB cable, and launch the RUU with the harsSPL NBH.
Click to expand...
Click to collapse
Thankyou! I been waiting all day for that!
HardSPL 1.22
HERE yuo can find the last HardSPL 1.22 lost in a too long thread...
Thank rling to have helped me to find it!
I have been rying to change it but it still shows:
NIKI100 MFG
SPL-1.15.Hard
CPLD-4
The "sspl-1.16-nike.exe" (the kemit icon, when on the phone) must be on the phone and executed from the phone itself (gives the tri-color screen). after that you can start the 1.22 exe from your PC and flash the spl as described.
Don't forget to backup first, remove storagecard and SIM before doing all this.
Related
Hi
My phone is I-mate k-jam (kind of G4).I unlocked my phone’s CID by hard SPL program from your website . I could not install phone’s original rom. Then I installed original rom by shelltools program. My phone is not operated after hard resetting. When I switch on my phone, it stopped in three-colored page. Please be kind enough to conduct me.
You need to remove the hard spl in order to go back to the original rom
http://forum.xda-developers.com/showthread.php?t=342744
randomgoon said:
You need to remove the hard spl in order to go back to the original rom
http://forum.xda-developers.com/showthread.php?t=342744
Click to expand...
Click to collapse
START-sSPL.exe error : no device connected please help
http://www.htcamerica.net/support/8125/software-downloads.html
I ran that just fine with HardSPL installed
LancerV said:
http://www.htcamerica.net/support/8125/software-downloads.html
I ran that just fine with HardSPL installed
Click to expand...
Click to collapse
is not installed
error [294] : invalid vender id
please help
@behzad_sedat
What is the SPL version?
Invalid Vendor ID means it's not CID unlocked..
So you need the original i-mate ROM obviously. Not the HTC/Qtek ROM..
BTW.: Soft SPL doesn't work in bootloader, it needs WM 5/6 in order to load the Soft SPL.
Connect USB cable, kill wscecomm.exe (in PC's taskmanager) and start the RUU.
Forget the warning the Ruu tells you about having an active activesync connection. Flash the original iMate ROM.
the-equinoxe said:
@behzad_sedat
What is the SPL version?
Invalid Vendor ID means it's not CID unlocked..
So you need the original i-mate ROM obviously. Not the HTC/Qtek ROM..
BTW.: Soft SPL doesn't work in bootloader, it needs WM 5/6 in order to load the Soft SPL.
Connect USB cable, kill wscecomm.exe (in PC's taskmanager) and start the RUU.
Forget the warning the Ruu tells you about having an active activesync connection. Flash the original iMate ROM.
Click to expand...
Click to collapse
hi
i installed K-JAM_Arabic_2160901_21609102_20710_ship.exe
error : [296] : upgrade only
this nbf file cannot be use for your pda phone. please get newer nbf file help please please
the-equinoxe said:
@behzad_sedat
What is the SPL version?
Invalid Vendor ID means it's not CID unlocked..
So you need the original i-mate ROM obviously. Not the HTC/Qtek ROM..
BTW.: Soft SPL doesn't work in bootloader, it needs WM 5/6 in order to load the Soft SPL.
Connect USB cable, kill wscecomm.exe (in PC's taskmanager) and start the RUU.
Forget the warning the Ruu tells you about having an active activesync connection. Flash the original iMate ROM.
Click to expand...
Click to collapse
ipl : 2.17.0001
spl : 2.17.0001
behzad_sedat said:
ipl : 2.17.0001
spl : 2.17.0001
Click to expand...
Click to collapse
You haven't got Hard SPL.
So only way to flash is original ROM (in original Language it came with).
the-equinoxe said:
You haven't got Hard SPL.
So only way to flash is original ROM (in original Language it came with).
Click to expand...
Click to collapse
Dear Sir
I explain my problem more accurat. I downloaded Soft SPL accompanied by Vodafone Qtek 9100 G4 IPl&SPL.zip after reading topic of How To Remove HardSPL and according teaching I transferred nk.nbf file from Vodafone Qtek 9100 G4 IPl&SPL.zip file to Soft SPL file .Then I wanted to perform Start-sSPL.exe file but I could not perform. Then I found Soft SPL is not operated in Bootloader.Then I performed 2.exe (ROMUpdateUtility MFC Application) file in Soft SPL file accidentally. I thought it is being installed. After accomplishment I found my phone’s spl has turned from olip to 2.17.0001.So I wanted to install original ram but I couldn’t install. It is installed wm6 on my phone completely now but it is stopped in spl page. I think I could not remove my phone’s hard spl completely. Please be kind enough to help me.
behzad_sedat said:
Dear Sir
I explain my problem more accurat. I downloaded Soft SPL accompanied by Vodafone Qtek 9100 G4 IPl&SPL.zip after reading topic of How To Remove HardSPL and according teaching I transferred nk.nbf file from Vodafone Qtek 9100 G4 IPl&SPL.zip file to Soft SPL file .Then I wanted to perform Start-sSPL.exe file but I could not perform. Then I found Soft SPL is not operated in Bootloader.Then I performed 2.exe (ROMUpdateUtility MFC Application) file in Soft SPL file accidentally. I thought it is being installed. After accomplishment I found my phone’s spl has turned from olip to 2.17.0001.So I wanted to install original ram but I couldn’t install. It is installed wm6 on my phone completely now but it is stopped in spl page. I think I could not remove my phone’s hard spl completely. Please be kind enough to help me.
Click to expand...
Click to collapse
tyr the ,wizard love, rom did the trick for me
bill4676 said:
tyr the ,wizard love, rom did the trick for me
Click to expand...
Click to collapse
i cant download wizard love rom
You have requested http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar (54413 KB).
You have reached the download-limit for free-users. Want to download more?
Get your own Premium-account now! Instant download-access! (Or wait 92 minutes)
lol.. Wait 92 minutes then
bill4676 said:
tyr the ,wizard love, rom did the trick for me
Click to expand...
Click to collapse
Dear Sir
I installed rom of wizard love and my phone is operated.
Thank all of you
I tried the following steps on my O2 Xda Mini S and after rebooting it doesn't show the SPL is 2.21.olip. It just show the original version.
Any help out there?
-connect your device
-Start hard_SPL-G4.exe
-Push the "Check DOC" button
-> The tool now checks whether your device is truly a G4, if not, it will give you an error and stops.
-> after this a dos box pops up, and it loads the softSPL to your device, to enable hard-SPL flashing.
-> then a Rom Update Utility will start, ONLY proceed if your screen is white!
-Proceed with the upgrade, it will only take a minute.
After reboot the IPL version is : 2.21.0001 and the SPL is 2.21.olip
Thanks
What is your current ROM, IPL/SPL?
Have you tried another USB port, or even another computer?
try to ugrade other rom (try the new TNT )version but take care ROM must be without ipl and spl !!!
here is link for version with ToucFlo
don't forget to use MUN's RUU
make the update on yours root drive !!! C:/ !!! i mean the update and ROM files must be on it !!!
Let the proccess going to the end and if it stops at 99% don't panic
wait and it will end and restart !!!
to mrobo and equinoxe
thanks both of you for your reply.
i haven't tried different computer(my other computer is a mac), but i have tried different usb.
Following version.
IPL 2.21.001
SPL 2.21.001
GSN 02.07.10
OS 2.21.4.1
Rom version is still the one that came with it from O2.
Do i need to do the hard_spl before upgrade the rom to one of those you told me?
Thanks .
its g3. Read damn topics
mghandour20 said:
thanks both of you for your reply.
i haven't tried different computer(my other computer is a mac), but i have tried different usb.
Following version.
IPL 2.21.001
SPL 2.21.001
GSN 02.07.10
OS 2.21.4.1
Rom version is still the one that came with it from O2.
Do i need to do the hard_spl before upgrade the rom to one of those you told me?
Thanks .
Click to expand...
Click to collapse
ignore kubek1334
Do you mean IPL 2.21.001 SPL 2.21.001 or
IPL 2.21.0001 SPL 2.21.0001?
after update my hermes my phone dosent start windows after another upfate with a shipped rom the phone finish the update but stil dident start windows any suggest
ipl.1.01
spl 140 olipro
londere said:
after update my hermes my phone dosent start windows after another upfate with a shipped rom the phone finish the update but stil dident start windows any suggest
ipl.1.01
spl 140 olipro
Click to expand...
Click to collapse
You might need to reflash it. Hold the two soft keys and then push the reset button. it will ask to hard reset. If the phone fails to come on after the hard reset, then hold the left 'ok' key and the power button, and then push the reset under the phone- this will take you to a tricolor screen where you can then re-flash the phone. try reflashing with official rom's, before using any other roms.
yes i do but it still in boot any sugest ipl 1.01 spl 1.40 olipro if any know how to update ipl with hard spl or how to remove hard spl it will be aprecible
My suggestion would be to try using sd to reflash the rom and see if that orks. format sd card making sure its fat 32 then put .nbh file in root directory. rename to herimg.nbh then insert into phone. go to bootloader and it should start the flash straight away. if this works make sure you upgrade spl to olipro 2.10 hard spl so its easier if there are problems. you can possibly upgrade spl this way too (get nbh file and rename hermimg.nbh). I tried this on my herme 100 and it seemed to work. it will flash the spl BUT when it restarts it will go straight to bootloader and start flashing again. as soon as it restarts get the sd card out and put on the os you want to flash. insert card and as long as you've named it hermimg.nbh it should flash new os with spl olipro 2.10. Good luck flashing.
You should read the wiki first : http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
your phone can be unbricked using the information on wiki.
only enter to bootloader the ipl dosent start also i fla**** but it stil apear spl.140oli whei in flash it with hard spl 1.10 and when i flash it with spl 2.60 oli it send me a error i try to flash it with qtek-cingular-doppod roms and nothing any suggest
any fu**ing suggest?
also it avoid me to update spl im stuck on hard spl 1.40 and ipl 1.04 i try to flash hspl 260-210 but it refiuses to stay in 1.40 radio 1.27 patched the ipl works but it frezzes with the green led dosent apear nothing
my device still blocked in boot mode i dont know if it is briked the device had the following info
ipl 1.04
spl1.40 oli
radio maybe no
os no
any suggest
any sugest to save my hermes
follow the unbrick guide link that koorosh_bsboys posted
it cant be unlocked its stuck in spl 140 olipro
did you follow the unbrick guide that koorosh_bsboys posted?
just stop trying any unauthorised ideas. let me know if i can help u. i have a friend in o2 service centre here in india. he can get ur device working. he does it by help of a software and 3 cables . it takes about 2 hrs. just let me know if u want ur device to work again
stil zombie my device im getting crazy any ideas
londere said:
stil zombie my device im getting crazy any ideas
Click to expand...
Click to collapse
If you want people to help you, you have to help yourself first!
1st of all, have you gone to read the Wiki as suggested?
2nd what methods have you tried to unbrick your device?
If you can't answer these questions then we can not help you, you keep asking for suggestions but you do not even reply to other's questions!
Here's a good place to start helping yourself if you haven't already http://forum.xda-developers.com/showpost.php?p=1465974&postcount=1
Hi, I was unlocking my htc 8525 at&t but i was using vista and my cell keep in Type 2a: When the phone boots, it goes directly to bootloader mode (tri-color screen)
what can I do to fix it... tks
Whats the info for your SPL?
Hi, I got my Hermes 8525 in boot mode what i did is to install this Schaps_WM6Pro_WWE_4.00_Full.exe now my hermes is working but i want to unlock it..what can I do cos everytime i try got in to boot mode again..any help tks.,..
SPL- 1.40
Try unlocking it with Windows XP
hi, i tried in win xp but keep the same in boot mode...
On the PC, in activesync settings, untick "Allow USB Connection".
Put Hermes into bootloader (tri-colour screen) and then run the RUU_Wrapper.exe file of the unlocker program. Follow all the instructions to unlock your Hermes and once its unlocked put Hard SPL V7 on it BEFORE flashing any thing else. After flashing Hard SPL V7, go back to bootloader and check SPL is 2.10 oli.
You now have a Hermes that is easier to recover if somehing goes wrong with a flash, excluding radio rom flashes.
Cheers...
Hi, canu put the link of the program u told me to use..tks for your help..
RUU_Wrapper.exe, Its included in any rom you want to flash. Its how you flash using the PC...
Hard SPL is in the sticky of the Hard SPl thread in upgrading section.
i bricked my device back to spl 1.20 from 3.xx because the wifi and gsm antenna's didn't work after flashing it to AP 4.0! .. so i decided to flash spl back to 1.2 since my phone is X7500 . After downgrading SPL , i cannot flash to ANY ROM , HELP!!!...
http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33 <<look
tried this, didn't work on my X7500
maybe you should try to flash a rom from sd-card.
download a original wm6 or wm5 rom, extract it, rename ruu_signed.nbh to ATHEIMG.nbh, copy to a fat32-formatted sd-card, insert it to your device, press and hold camera-button and softreset
please do not use a sdhc-card
bilalperwaiz said:
i bricked my device back to spl 1.20 from 3.xx because the wifi and gsm antenna's didn't work after flashing it to AP 4.0! .. so i decided to flash spl back to 1.2 since my phone is X7500 . After downgrading SPL , i cannot flash to ANY ROM , HELP!!!...
Click to expand...
Click to collapse
xacsx solution was for the lost wifi
Can you get into bootloader and what do you see?
and does any os boot up?
edit posted simultaneously with xacsx above.
My question is stillvalid
when i'm in the bootloader it shows the tricolour screen and IPL -v1.00 and SPL-v1.20 Olipro
I tried loading a ROM from the bootloader but it shows weird characters and says that this rom cannot be loaded on this device.
bilalperwaiz said:
I tried loading a ROM from the bootloader but it shows weird characters and says that this rom cannot be loaded on this device.
Click to expand...
Click to collapse
did you manage to do cmonexs mtty solution?
Have you got your athena working again?
yes i finally got my athena working!.. i realized that i wasn't running mtty as Administrator in Vista, i did that and VOILA! everythings solved, and im running AP4 now.