i tried updating the rom, which i have done a few times before, but this time i tried to update it in windows 7, i did not secceed and eventually i got the tree color screen, then i moved to my xp machine and i tried upgrading there, everything was going fine, and just when i the upgrade process was about to finish i got the tree color screen again. i read the vista rome upgrade tutorial and my win7 had the proper vista drivers installed. could i consider my device bricked????
dddnnnggg said:
i tried updating the rom, which i have done a few times before, but this time i tried to update it in windows 7, i did not secceed and eventually i got the tree color screen, then i moved to my xp machine and i tried upgrading there, everything was going fine, and just when i the upgrade process was about to finish i got the tree color screen again. i read the vista rome upgrade tutorial and my win7 had the proper vista drivers installed. could i consider my device bricked????
Click to expand...
Click to collapse
I don't think your device is bricked you need to install those vista drivers properly a Flash failing at 90 - 95% is common if those drivers have not installed correctly
Follow this guide here it has pictures and works for most users (you need to connect to USB in bootloader to install the drivers on win 7)
http://forum.xda-developers.com/showthread.php?t=485293
When you have done that try to flash the nvid recovery ROM to restore your prophet to factory win5 (Then you will need to Unlock and hardspl again if you want to upgrade)
I can not enter bootloader, and i can not establish connection with the pc. I installed the drivers, no change, my screen still stays with the tree colors, i still can not manage to get any of the RUUs wirking.
dddnnnggg said:
I can not enter bootloader, and i can not establish connection with the pc. I installed the drivers, no change, my screen still stays with the tree colors, i still can not manage to get any of the RUUs wirking.
Click to expand...
Click to collapse
The three colour screen is bootloader
The problem is loading the drivers in vista i have found a different tutorial try this one
Please note that you are the only person having trouble flashing on win 7 follow the tutorials or we will get bored with your post
Only follow this thread for driver install the rest is not for your device
http://forum.xda-developers.com/showpost.php?p=4194862&postcount=2
When the drivers are installed correctly follow my recovery post above
Thanks for the support, i followed the abovegiven instructions (http://forum.xda-developers.com/showpost.php?p=4194862&postcount=2). 10a did not appear and the date in 12 was 2004 not 2003. Strange new thing happened, the phone restarts itself automatically, so i removed the battery now.
Anyways, i belive that it was time for my prophet to retire. Thank you all for all of the support and all different roms, great job, great community, the greatest of ots kind. Unfortunately i will not be able to participate here with my new phone, i got Sony Ericsson Satio.
Wishing the best of luck for all the forum members,
With kind regards,
dddnnnggg
P.S. Please inform me if you create a Symbian subforum Thanks once again
Related
hi
guys i am newbie in upgrading and tried to run athena wraper and it died and after searching forums i still cant find cure ok so here it is i can do hard reset but it dosent help no boot up it still gives me ring round joystick good news is i can get it to bootloader screen (or at least thats what i think ) its red green blue and white screen with usb or serial (depending on cable )
screen reads
ATHE100
IPL-V0.90
ATHE100
SLP-V1.20.Olipro
now can any one help me ??
how can i upgrade rom with out device being detected by active sync every time i run upgrade utility it just comes up with connection error
still no luck
hi
still no luck
do i need special drivres to detect device if its in bootloader ?
it dosent show any thing in device manager when i connect it while its in boot loader
on running upgrade utility it comes back with error 260 connection error saying cannot find device (i am stuck in bootloader)
any advices ??
please help !!!!
The fact that you can still enter the bootloader means that it is not bricked, so first advice would be, as is so well presented in the Hitchhicker's Guide to the Galaxy, "Don't Panic".
Enter bootloader without any SD Card or SIM left in the Athena.
Then, plug it to the USB port, and see if it goes from "serial" to "usb".
Then try to flash first the Black Dual PK ROM available on the forum (in the WM6 section), or an official ROM available from the Wiki, for instance.
hi
tried to flash it with both and came out with same error
260 connection cant find device
and i cant even see any changes in devicemanager but it dose goes serial to usb when i connect
and my pc is not detecting the device (just like that depressed robot from hich hikers guide to galaxy )
Do you have Windows XP or Vista ?
Ecraseur said:
Do you have Windows XP or Vista ?
Click to expand...
Click to collapse
xp (pc i am trying to upgrade i also have vista on other pc which i havent tried yet should i try that ?)
nop no luck in vista ether same error still no connection
both pc have netframework 2
activesync in xp and mobiledevice center in vista
but after connecting device nothing happens in device manager there is no new device
(could it be beacouse of faulty cable? )\\(noi have tryed 2 different cable )
is it worth getting cradle ??
No no. I think the problem comes from the flash utility that requires that the Athena be detected prior to flashing.
I know that with the Universal, some flashing utilities could force flashing when connecting the device already in bootloader mode...
So there must be an easy way to bypass the device detection and go on with the flash process. I'll try and find out, and maybe one of the gurus will cruise by and find it for ya in the meantime.
In the meantime, don't freak out and be patient. Your Athena's not bricked, probably the ROM that's screwed up. We only need to find a way to do that exclusively from the bootloader (chich I know is possible, that's the whole point of the bootloader ).
vijay5264 said:
nop no luck in vista ether same error still no connection
both pc have netframework 2
activesync in xp and mobiledevice center in vista
but after connecting device nothing happens in device manager there is no new device
(could it be beacouse of faulty cable? )\\(noi have tryed 2 different cable )
is it worth getting cradle ??
Click to expand...
Click to collapse
Hi
Try a hard reset ( Volume down+reset) and then get into the boot loader(Camera+reset~10seconds) then flash the PK dual rom. Don't panic, Your athena is hard spl patched therefore not bricked. If that not works down load the exact official rom for your device flash that then flash the PK dual rom. try Redownload the rom again.
Good luck
HeartOfDarkness said:
No no. I think the problem comes from the flash utility that requires that the Athena be detected prior to flashing.
I know that with the Universal, some flashing utilities could force flashing when connecting the device already in bootloader mode...
So there must be an easy way to bypass the device detection and go on with the flash process. I'll try and find out, and maybe one of the gurus will cruise by and find it for ya in the meantime.
In the meantime, don't freak out and be patient. Your Athena's not bricked, probably the ROM that's screwed up. We only need to find a way to do that exclusively from the bootloader (chich I know is possible, that's the whole point of the bootloader ).
Click to expand...
Click to collapse
hi
thankes i think u understood the problem it is utility which fails before even starting beacouse of no connection see if u can find any thing
and yes i tryed hard reset and then tryed to flash with project black rom and i have downloaded latest t mobile rom from oficeal website but as i said before it fails with connection error it starts up and box says ''verifying information on your pda fone please wait'' and minut later it comes up with error 260 connection error '' please check following
1 your pdafone is connected to usb cable /cradle
2 usb cable connected to pc
(wich is basicly same if you try to nrun upgrade with out connectind pda )
(and yes i have tryed it with 2 different cables and it dose change from serial to usb)
some ting intrestin i foun in orignal update utility faq
ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
is possible because device is in bootloader ?
or am i doing some ting wrong?
Reboot your PC, make sure you are not using a USB hub, try it with each USB port on the PC.
Pantaloonie said:
Reboot your PC, make sure you are not using a USB hub, try it with each USB port on the PC.
Click to expand...
Click to collapse
good idea but dident work after 4 on board ports and 2 hub ports no joy at all
by looks of it upgrade utility is trying to read info from my device and could be failing for 2 reasons
1 it is not detecting device
2 info in pda is corrupted and could not get any info from device
well thats my theory but not really sure any suggestions??
Is your PC running XP or Vista? I got the impression reading the post that XP machine works better in unlocking. I think the info was posted by Olipro himself if my memory is right.
eaglesteve said:
Is your PC running XP or Vista? I got the impression reading the post that XP machine works better in unlocking. I think the info was posted by Olipro himself if my memory is right.
Click to expand...
Click to collapse
it is running xp the one i am working on now (i do have 2nd pc running vista 64 bit )
but i am doing unlocking in xp
all i want to find out is dose device needs any drivers or dose it gets detected if device is in bootloader ?
if thats the the case i dont see any new devices in xp devicemanager
No no, it doesn't. Couldn't find it for Athena, but don't have much time lately, alas.
Maybe you should PM one of the gurus asking how to flash a ROM straight from bootloader without having the device detected by WinXP. I believe there's a small, easy manipulation to make, but can't remember it for the life of me. :-S
HeartOfDarkness said:
No no, it doesn't. Couldn't find it for Athena, but don't have much time lately, alas.
Maybe you should PM one of the gurus asking how to flash a ROM straight from bootloader without having the device detected by WinXP. I believe there's a small, easy manipulation to make, but can't remember it for the life of me. :-S
Click to expand...
Click to collapse
i found this in wiki and first three posts are empty but followed the procedure and downloaded all three roms and still no joy error
''Problems using the Athena Unlocker - the Black Screen of Death
Using The Athena Unlocker tool (developed by Olipro) is a 3-stage process. Most users get through the first stage but as they start stage 2, get a black screen where their device becomes unresponsive and so cannot proceed with the unlocking. See these posts
http://forum.xda-developers.com/show...&postcount=169 or http://forum.xda-developers.com/show...&postcount=176 or http://forum.xda-developers.com/show...&postcount=226
It is always recommended that you first take out your MiniSD card. You can then follow the instructions below.
* Get one of the ROMs in this link and extract it http://forum.xda-developers.com/showthread.php?t=314672
* Get your device into bootloader (the three-colour screen; You can get there by pressing the Camera key + Volume key + Soft Reset at the same time)
* Connect your device to your PC (even if the PC shows no sign of recognising it, it does) and the SERIAL shown on the screen of your device will change to USB)
* Hit the ROM Upgrade Utility and upgrade your device.
* Once the upgrade is completed, configure your device (Calibrate screen, set time zone, etc).
* Now continue with the Unlocker, to the end.
It is important to complete the unlocker to the end or else you will miss out on flashing your radio, with a common symptom of your gps not working.
Good Luck and enjoy your improved device!
''
now i am still stuck will it make any difference if i try it in different xp pc other then the one i started the process ?(and screwed it up)
Please ensure all software firewall or IP filtering apps are turned off then reboot the PC. After rebooting, confirm the apps are not running and blocking anything. If you are unsure, then try it from a freshly installed XP.
Put the device in Bootloader mode and try it again.
lpsi2000 said:
Please ensure all software firewall or IP filtering apps are turned off then reboot the PC. After rebooting, confirm the apps are not running and blocking anything. If you are unsure, then try it from a freshly installed XP.
Put the device in Bootloader mode and try it again.
Click to expand...
Click to collapse
good idea
i have already tryed with firewalls and virus protection off but doing it in fresh xp might just work small question do i need to install active sync or is it not needed (any way ill try both first without and then with )
ill report back in about 3 hours (i know i am sad and havent got a life but its worth a try )
Yes, the wiki confirms what I thought but didn't voice out loud as yet (I was sure about it for the Universal, but not for the Athena): the upgrade utility doesn't *require* that it be Activesynced. That's, as I'd said, te whole point of the bootloader.
If you still have problems uploading the new ROM to your Athena after following the wiki thing, then it *does* mean that there is some external factor playing dirty, so the firewall to check (and some anti-virus software also scan network connections) indeed is a good idea.
Keep us posted, and I'm keeping my fingers crossed.
Now including Guide 3, porting sys and xip from newer versions of windows mobile, so now you can have 6.5.x on your phone if you want to cook it in yourself.
[From MoDaCo]
This was written for the Omnia 2 SCH-i920 VERIZON WIRELESS phone
First Guide
This will be the first installment of Guides to building/cooking your very own ROM. I know there is a lot of talent out then and if we can pool it together we can make our phones even better (or at least better looking).
This first part is rather easy and just gets your feet wet as there are a LOT of things to learn about cooking. If you are patient you can make some amazing roms. The only thing I ask is that you make one for the rest of the community as well. It's all well and good to make your own custom rom, but to not share some of your work will not further others in their quest for the "perfect" phone.
Stock DC23 Rom from Samsung (PDA only not CSC):
http://www.4shared.com/file/AyPwHiDe/i920_DC23_Stock7z.html
Second Guide
Okay guys here is part 2 of my ROM cooking tutorial.
I think I you may have to reset the Read-Only Flag on the initflashfiles.dat I cannot remember.
I just have one word of caution for you guys wanting to create your own ROMs. If you find cracked cabs (yeah I know they are out there) DO NOT post them nor the ROMs created with them here at MoDaCo. It is against their policy.
I'm attaching the part 2 guide and the batch file for opera.
Ok, thought I done everything right. I read your guide down to a t and flashed it after taking vzwtones out. Phone booted to windows splash screen and now it's stuck on a white screen. it's been a couple minutes but it did this last time I tried to make my own rom. I don't know what I missed or didn't do right. Does it normally take forever to load like this?
did you try to flash without taking anything out of the rom?
What is the size of the rom?
no didn't try it without taking anything out. I will do that next. Size of rom after taking vzwtones is 284mb. I downloaded this file. I have izarc as an extractor and I took the 001 off the end and left everything else in tact.
Ok, flashed without taking anything out of rom. It's not working either. I notice everytime a rom doesn't work there is no verizon start sound...so I know ahead of time when the rom won't work. All I done this time was click buildos. I am using windows xp under vmware 7 still with sp3 installed. Could that be a factor, even though I've been able to install other roms successfully?
Now it's on a white screen. I'm just gonna see if maybe it will boot up after all...even if it takes all night...unless you have some idea what I may be doing wrong lol
If you don't see the orange load screen after vzn screen, then it won't load.
Why are you using VMware? I don't think that would be a reason why it wouldn't work, but I don't know since I don't use it.
seen the orange windows screen...then it went to white screen and it remained on there ever since my last post.
I use vmware because I tried to install the mit drivers on my windows 7 home premium 64 bit but I couldn't find a driver to work...then octans wouldn't work on 7. I have since redone my computer so I may try again to free up space lol. but now I am trying wozzers kitchen so i am hoping it will boot up. didn't take anything off
darn wozzers don't work either. it got stuck on the verizon screen. never went to windows welcome screen. Geez. What am I doing wrong? I guess I'm gonna see if it's becuz of vmware if I can actually find the driver for my puter. or my phone is messed up...but like said earlier...other roms work on it?
are you looking for Mit drivers for win 7 64-bit?
I have attached the win 7 64-bit drivers for Omnia 2. Yes they work in OCTANS full version, and yes they work for the SCH-i920 verizon Omnia 2
sweet gonna try and see if that works out. Thanks.
well windows 7 is not working out for me. I am just having bad luck all around. octans won't recognize my phone. i did the steps from modaco and installed samsung 4.34 cdma modem...then I rebooted and upgraded the mit to the one you gave me...still no luck. Nothing.
guess i gotta keep vmware and just keep trying to make the rom. I just don't know what i am doing wrong..i think it has to be the file itself.
Did you press f8 and boot into disable signed driver mode? When you system is on and you turn off the phone, open up devices and printers. Watch the i920 icon appear as you plug the phone into the usb port (no usb hubs). Does the icon have an exclaimation point on it?
I did it under device manager. Yeah I pressed F8. When I installed the driver after unplugging and replugging phone in it came up with a red box with two options (guess it's the driver not signed box) but I went ahead and installed it and it said installed successfully.
is the samsung cdma modem 4.34 the right one? I tried finding one that said 4.1.34 but I couldn't find one under google.
It's just weird that even installing the dc23 rom and wozzers kitchen rom without modification it didn't even boot on my phone. I took the 001 out on the dc23 and unzipped with izarc. I'm stuck. It seems like it works for everyone else..i've gotta be doing something wrong?
Attached is the screenshot of the drivers successfully installed.
Win7 has a strange way of dealing with these drivers. you have to play with it a bit. Sometimes just reseting the device will make it okay. Make sure you setup OCTANS before you connect the phone. Are you getting any error messages in OCTANS when you connect the phone? it should display something.
you have to restart after installing the unsigned drivers, and yes hit f8 again to allow disable driver signing.
Yeah it didn't install. I checked the version and it looks nothing like yours. Gonna try it again lol. I didn't restart after installing..it didn't even ask to. Maybe this will work now. Only thing that octans showed was the ondevice string when i hooked phone up. Everytime i disconnect and reconnect it would show ondevice with a string of numbers at the end.
Got it! I followed your instructions and it finally let me use the unsigned driver! Now I am trying to do the rom again and see if it will work under windows 7. I hope I finally fixed the problem.
Thank u.
ok octans flashed successfully with no errors. Now I just gotta see if phone will go past windows orange screen or the white screen that it tends to get stuck on. One problem fixed...fearing another problem may arise.....
.
update...it is on the white screen now...prob 3 min now. I will rebuild the rom w/out removing anything and try again.
you have to be quick.
Have device manager open and waiting.
Connect the phone. (you should see the Omnia 2 logo, and hear the usb tones from the win7 machine)
if there is an samsung icon with an exclamation mark on it, OR if the other drivers are installed, expand mobile devices and then...
Right Click "Samsung MITs USB Sync"
click update driver software...
click "Let me pick from a list of device drivers on my computer" (mayhave to click browse first can't remember)
then click "Have Disk..."
navigate to the i8000 win7 -64bit drivers
click open/ok then wait
by now your phone will have shut off and no longer show up in device manager.
reconnect the phone, wait for the USB tones...
then click "Next"
This may take a couple of tries and if you use a laptop like me you may have to redo this whole procedure everyonce in a while.
After you do it correctly the first time just restart the computer and hit f8 disable signed drivers again.
You should be GTG. If you ever have a problem again, try to disconnect/reconnect the phone, or even restart the phone with the stylus, before reinstalling the drivers.
Let me know how it goes.
Hi guys, I've had a fair read through the forum already but can't find a solution to my problem.
I have a HTC Magic which I have rooted and am running cyanogen 6.0 RC.
My problem is with my girlfriend's Tmobile HTC G2 (Hero).
I initially tried running the 2 part update from Tmobile but receive the yellow triangle error so am told to downgrade my rom from the HTC site.
I cannot for the life of me get this to work, HTC sync works fine. I run the uud.exe file update and the phone boots to UUD usb mode,xp informs me of "android 1.0" being connected and the installer gives me error [171] USB connection error.
The program then terminates, the same thing happens following the guide: http :// forum .xda-developers. com/showthread.php?t=645253&page=3 (cant add the link)
I'm stuck for ideas. Booting into hboot (power on and vol down) gives me my spl:1.76.007 which know for the magic was the perfect spl. The radio is 6.35.07.08.
Any help would be appreciated, all I want is this retched device to be upgraded from android 1.5!!!
Thanks in advance.
Nath
As noted in my FaQ please follow my guide on Correct drivers and check the bootloader drivers section. This should fix your issue.
Not development related, reported to be moved to Q&A.
buddn, I have the same phone all stats identical and got the same error too. It locked up the phone on the skate-boarding android screen and let a nervous half-hour of searching before pulling the battery and it restarted fine.
If you solve this please post back what I/we are doing wrong.
btdag, can you be any more specific? Do I have to use your drivers? I have used ones from the latest HTC Sync and the latest Android-SDK, I'm running Windows 7.
Currently setting up the XP mode in Win7 as plenty of people seem to recommend flashing from XP instead. But progress is slow as the hours I have to play are limited!
Thanks both,
Craig
What ROM version are you running currently and what are you trying to downgrade to?
I had SPL 1.76.0007 originally, I ended up using the engineering SPL (2007) but that was for other reasons.
But btdag's guides are really well laid out, sometimes you do have to uninstall all your drivers and just follow his steps, I know I have in the past and that normally solves everything! He provides links to ADB and HTC Sync drivers, but personally I use the ones from the ADK and the latest HTC Sync I could find... but then I'm a bleeding edge kind of guy
Can you both try the "GoldCard" Test Procedure for me in my guide here
This has been done today and there may be some edits necessary to get it completely working, it's also designed for Windows 7 rather than XP or Vista and should work on both x86 (32-bit) and x64 (64-bit) systems. Having said that it should also work on XP and Vista in a similar way.
dancollins said:
But btdag's guides are really well laid out, sometimes you do have to uninstall all your drivers and just follow his steps, I know I have in the past and that normally solves everything! He provides links to ADB and HTC Sync drivers, but personally I use the ones from the ADK and the latest HTC Sync I could find... but then I'm a bleeding edge kind of guy
Click to expand...
Click to collapse
I have updated my guide to use the latest HTC Sync drivers as they appear to support adb correctly. I'll be editing my driver guide soon and possibly removing it altogether. I'm also a bleeding edge kind of guy but i've only recently found the latest version of the drivers to work. I had no idea about the implications, until now.
hey.
i have a tmobile g2 and i used btdag's guide for rooting it. seeing i tried to simple procedure and failed, i resorted to the goldcard method. it took me only 3 hours xD.
the reason it took me so long was the wrong drivers. when i reviewed the guide i tried the drivers mentioned there and it work. oddly enough, stock drivers that came with the g2 were said to be for g1 magic. the gold card method works flawlessly and now i have a rooted hero with amon_ra's recovery and custom rom.
btdag, mate, thanks for the guide. helped a lot.
oh and yeah...the "downgrade" was actually an upgrade seeing i had an even older rom on my hero (bought 6 weeks ago). stock rom was android 1.5 (ancient )
Thanks btdag, that revised goldcard tutorial worked a treat! I now have 2.73.4705.5 installed and can play properly!
The problem I had was the fastboot driver not being installed hence not connecting to the exe file upon the reboot. After installing the correct driver for that the process worked a treat.
As a side note, I couldn't connect to htc sync after changing the driver but it wasn't needed.
Thanks for all your help. Got a "buy me a beer" link?
Nath
Glad to have two positive responses to the revised guide.
@buddin - i also can't connect to htc sync at the moment, i'm wondering whether its because of my rom but maybe it is the software/driver, i'll look into it further.
I don't have a "buy me a beer" link cause I have only re-written other peoples work. Thanks for the praise though
i had the same problem about the htc syncr for weeks, it doesn't syncronise , i found that if uncheck USB debugging, and pull down the notification bar check the syncro and then open HTC syncro then it syncronises.
i think it something to do with, when ADB is setup and working somehow it cancels the HTC syncro, but who needs HTC syncro when you got ADB
i find HTC syncro useless comparing it to ADB. except from sync contacts and calendar ,that about it, nothing more. thanks to Btdag with his so made easy to follow guides and the all the devs for doing what HTC could not do.
try it guys, i may be wrong !!.
cheers
Okay first off, I already flashed many Magic and HD2 Roms, so I know how to read guides and respect tutorials...
...but I just can't unlock my 10.1v !
I tried the method from the sticky and the method with Odin but nothing. The first one doesn't answer went I enter the commands (no waiting for device), the second seems to detect my tab but Odin doesn't do much when I click start.
I tried Ubuntu, Windows XP and 7. Best results were with XP. The main issue is the drivers. I pointed Windows to the usb drivers coming with Android sdk but it never seems to connect properly. With 7 the drivers never installs well, with XP it does but unlocking doesn't work any better.
I tried the Pdanet app drivers, I tried with and without adding in the .inf file the extra info about the 10.1v...
PLEASE HELP. I'm trying since Monday...
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
freebo21 said:
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
Click to expand...
Click to collapse
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
berrywr said:
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
Click to expand...
Click to collapse
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
freebo21 said:
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
Click to expand...
Click to collapse
What is your Zune version number and OS version?
berrywr said:
What is your Zune version number and OS version?
Click to expand...
Click to collapse
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
freebo21 said:
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
Click to expand...
Click to collapse
What about putting your phone in bootloader mode and will it read USB below when connected to pc?
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
nikola92 said:
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
Click to expand...
Click to collapse
I've inserted a correction here...I restarted by device in bootloader mode and plugged it into my laptop; Zune did not start; however, the letters "USB" do appear in the center-bottom. Rest of post remains the same...You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
berrywr said:
Your phone uses both Zune and WMDC when you are in Bootloader mode. You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
Click to expand...
Click to collapse
I tried on windows 7 pro 64 bit and win 7 home premium. It did not work. In bootloader mode to install the drivers successfully but the Zune does not detect the phone in this mode. Including the phone in normal mode, the driver installation error pops up device not recognized. Zune without the driver does not detect the phone. Previously the phone was detected under the name HTC Titan X310 is now htc eternity.
please help
I have exactly the same problem. Please help: (
vakos8 said:
I have exactly the same problem. Please help: (
Click to expand...
Click to collapse
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
berrywr said:
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
Click to expand...
Click to collapse
Does anyone have any ideas what it could be? Please help solve the problem.
freebo21 said:
Does anyone have any ideas what it could be? Please help solve the problem.
Click to expand...
Click to collapse
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
HTC TITAN
xconomicron said:
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
Click to expand...
Click to collapse
help someone? Zune still does not see the phone. The system can not install the driver why are these problems (it does not recognize the phone)
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
HTC TITAN
AndrewSh said:
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
Click to expand...
Click to collapse
It's not possible. Windows does not recognize the phone. Install different ROM and nothing. Even on a clean TANGO same
+1
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
problem
help someone?
domipasc said:
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
Click to expand...
Click to collapse
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
xconomicron said:
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
Click to expand...
Click to collapse
I've never used the Dynamic ROMs but I can't stand using Zune so I tweaked my registry to make my Titan visible via Windows/File Explorer, I'm curious as to whether any of you with this problem can connect your devices to the developer tools with Windows Phone 7.x for side loading apps.