Related
I have asked around before about getting the WM6 VoIP on this bad boy, and no one seems interested. The standard Cab files will not work, and it has been speculated this is because of some missing certificate files.
I know there are few out there with other devices that have the 6800 as well, and we can compare the certificate files between the two devices to see if we can get this working.
Certificate bypass...
Have you tried "unlocking" the certificate requirements through the registry?
The settings are available on the HTC WIKI here: http://www.htcwiki.com/page/P4000+Telus?t=anon and will allow programs/cabs to be installed regardless of certificate authentication. Bear in mind, this is NOT a method of unlocking the phone for another network, simply a means to dismiss certificate requirements for program installation.
I'm not interested in the VOIP per se, but if the certificate is the problem, this might be a viable solution... I hope it helps.
Yes I have unlocked the phone. As said its only sepeculated its a certificate issue. After installing the WM6 Voip cab file, all files that are recommended you check for, are there, but the phone does not give you the option to select internet calling.
I have tried it too cannot get the today plugin to show....
internet calling just doesn't show up
webdude12 said:
Yes I have unlocked the phone. As said its only sepeculated its a certificate issue. After installing the WM6 Voip cab file, all files that are recommended you check for, are there, but the phone does not give you the option to select internet calling.
Click to expand...
Click to collapse
all files installed, internet calling checked in today's settings, but doesn't appear on today's screen.
does anyone knows what's wrong with ppc6800?
Does anyone have another WM6 device that they have the VoIP Client working on. I think the key maybe a missing Registery setting, but dont have another device to compare too.
Look in this key:
\registry\HKLM\SOFTWARE\OEM\PhoneSetting\
I am guessing for something along the lines of: HiddenInternetPhone or HiddenVoip with a value of 0.
No "Internet Calling" on HTC P4000 (Telus)
I have the same problem. I installed WM6VoIP.CAB and SetupVoIP_v0.3.CAB, and setup access to the voip provider sip server (voipbuster.com). I was logged into voipbuster on my laptop, and as soon as I clicked ok from the "Setup VOIP" page, I received a message on my laptop indicating that I've been logged out of voipbuster because I have logged in from another computer. So, this means that Internet Calling is indeed working (or at least connected to the voip sip server), but just doesn't show up on the Today screen. I can see the "Internet Calling" option in Settings > Today > Items page, but "Internet Calling" does not appear in the Today page. It may be hidden or missing due to a registry key as the previous poster suggests. I have no idea what that key would be, but if anybody could look and see if you can find anything that would ShowInternetCalling, HideInternetCalling, or something similar in the registry, that would be much appreciated. Thanks.
VOIP works with no Internet Calling on Today Screen
I have an HTC P4000 (Titan, PPC6800) on the Telus network. And by installing WM6VoIP.CAB and SetupVoIP_v0.3.CAB, I was able to go into the SetupVoIP app and on the last tap, set it to "Whenver Available." This causes VOIP to become active if there is a WiFi connection. Nothing shows up on the Today Screen, but in the Phone screen, TELUS changes to VOIP (or whatever you name the SIP connection). After that, all calls are being routed through the voip provider.
The volume of the rear speaker (and earpiece when connected) is rather low, but definitely audible. That's the last piece of the puzzle I have to figure out.
Now Working, just a few bugs
Ok I’ve got the WM6 sip client working on my phone (telus-p4000) the same way with all the same problems as sabrex does. I’ve tried many voip clients on this phone with the same speaker problem, I’ve read some where that the HTC api doesn’t reference how to access the earpiece speaker on the p4000. Believe me these other voip clients work on almost every phone with proper speaker output, it’s just the p4000 that routes the sound to the rear speaker. So what it looks like is the sip extension to the phone software is trying to use the default wm6 routing path there by pushing all the audio to the rear speaker instead of the earpiece. Now a work around like sabrex said is to use the corded external earpiece. I haven’t been able to get any Bluetooth headsets to work on any of the other voip clients but maybe someone will have better luck with the wm6 client. I don’t know much about sound routing in wm6 but any help with a direction to look in would be appreciated, but I think HTC will be the only ones capable of helping with this.
sabrex said:
I have an HTC P4000 (Titan, PPC6800) on the Telus network. And by installing WM6VoIP.CAB and SetupVoIP_v0.3.CAB, I was able to go into the SetupVoIP app and on the last tap, set it to "Whenver Available." This causes VOIP to become active if there is a WiFi connection. Nothing shows up on the Today Screen, but in the Phone screen, TELUS changes to VOIP (or whatever you name the SIP connection). After that, all calls are being routed through the voip provider.
The volume of the rear speaker (and earpiece when connected) is rather low, but definitely audible. That's the last piece of the puzzle I have to figure out.
Click to expand...
Click to collapse
Has anyone been able to get the Today screen plugin to work with the P4000?
Hi All
Can anyone tell me where i can get hold of SetupVoIP_v0.3.CAB ?? Many Thanks!!
Where to get SetupVoIP
Found it here:
http://forum.xda-developers.com/showthread.php?p=1486120
This with WM6VoIP.CAB got it working on my Bell HTC-6800 (HTC Mogul / Titan). It's a user-contrib setup program that handles files and registry settings. Doesn't show on today screen, but it does redirect my phone to SIP when WiFi is available.
I've heard mention of a newer WM6VoIP.CAB, but I can't find it. The setup I have working puts audio through the back speaker, and from what I've read will be prone to very quiet audio.
Can you tell me how to di it from scratch? New Phone
i just got my Bell HTC-6800
Do I need to unlock it some how for this to work?
I have tried installing WM6VoIP.CAB and using SetupVoIP_v0.3.CAB to no avail.
Please post details of "no avail". How far did you get, any error messages?
Did you configure SIP using SetupVoIP?
- use Start / Programs / Setup VoIP?
- docs / support here
- did you set options to "whenever available", or "only if cell is not available"?
Which SIP provider are you using?
Are you using 802.11? Browser works?
When you view the phone screen, does the top left show VoIP (vs Bell Mobility)?
The Today screen doesn't work on my 6800, and I don't know how to solve it. I can place and receive calls, but the received audio is very quiet and comes through the handsfree (back) speaker. Headset is also very quiet (both wired and bluetooth). But when I'm at our remote mining areas I can place and receive calls.
Are you experienced with VoIP in general, and SIP in particular?
The whole story is in this very long thread:
http://forum.xda-developers.com/showthread.php?p=1590688#post1590688
got it working on bell 6800
gadzuk said:
Found it here:
http://forum.xda-developers.com/showthread.php?p=1486120
This with WM6VoIP.CAB got it working on my Bell HTC-6800 (HTC Mogul / Titan). It's a user-contrib setup program that handles files and registry settings. Doesn't show on today screen, but it does redirect my phone to SIP when WiFi is available.
I've heard mention of a newer WM6VoIP.CAB, but I can't find it. The setup I have working puts audio through the back speaker, and from what I've read will be prone to very quiet audio.
Click to expand...
Click to collapse
thanks for all the info here guys, i was able to get it working today on a bell 6800. im disappointed in the sound and features though. i have a nokia E70 and i use it's built in sip client which works will all the features of my asterisk PBX. i hope that this software will continue to improve.
Hi folks,
anyone managed to fix the audio problem on Titan ( P4000)
I get audio from the back speaher only
Thanks
back speaker audio
this is what i heard about the problem
Apparently HTC does not use standard Windows Mobile Audio paths on their devices as opposed to some of the other device manufactures.
This is word for word from HTC:
“It works on most other Windows Mobile devices because they more than likely use Microsoft standard audio path controls, HTC uses their own software architecture which is why it doesn't perform the same.”
Well, that sucks ...
They supply 80% of PDA phones to the market
and there is no work around it ?
My question, why is the sound quiet? Any other application that would put sound out would be normal volume. Why is the VoIP quiet then??
AGEphone Mobile 2 Speakerphone Edition does support the internal speaker on some select models (more to follow!) as of now!
New IMPROVED CABS HERE
*********
WM6.5 and now WM6.1
*********Install on Fresh OS
Tested and flying on my HD, HD2, Omnia II, Glofiish M700, Touch Pro2[Rhodium], BlueAngel[PDA2K].
This time i have made single cab[sipConfig.cab] with Schap`s voip setup inbuilt. Hopefully 3g option will work with this cab as i have changed few settings. Tweaked is home screen item selection[select thru Available and selected to make cellular call or sip/voip call{one have to use classic home screen to do this}]. This cab is GSM codec based unlike previous cabs hence very low bandwidth is required to place calls, Can be used to make calls over GPRS but not sure. Quality of calls is .99/1 and no dropouts and one can call as long as credit available in account. What else, as this cab will integrate into phone system, it is very easy to use with addressbook, etc. I have attached audioswitch out file which if installed comes into action[can hear from earpiece] 13 seconds after phone window is active on screen, doesn`t matter calling or recieving. I have also attached SRS file just in case if someone hear less/low volume from earpiece just follow the instructions attached. Also attaced is Wifi always on file which some HD2 users need. Also 5060 port has been enabled in these cabs but you may need to forward 5060UDP port in your router for possible two way communication. Hopefully you guys like this cab, Please leave comments and suggestions. Thanks
Credits to developers.
*Most of the bugs has been fixed discussced in previous cabs.
Previous Cabs can be found here
--------------------------------------------
UPDATE : 1
DIAL PLANNew cab[sipConfigDialPlan.cab] with jaaps Dial Plan inbuilt. Both sipConfig(setupVOIP) and DialPlan can be accessed from Start Menu. Now one have the option to install with or without dial plan. Thanks
UPDATE : 2
GPSNow there will be no problem when using GPS [File Updated]
UPDATE : 3
START MENUOnly one instance of voipSetup shortcut in start menu
UPDATE : 4
WM6.1 SUPPORTNow WM6.1 OS supported just choose the cab with WM6.1 written in it, others are for WM6.5 OS.
UPDATE : 5
VOLUME INCREASE Tip By: angusc Thanks Now one will be able to hear bit loud sound either from back speaker or earpiece.
UPDATE : 6
OTHER CODEC SUPPORTNow all major codec supported ie: G.711 a-law, G.711 u-law, GSM codec.
--------------------------------------------
*RECOMENDED INSTALL LOCATION : DEVICE*
*DO NOT INSTALL ALL CABS, JUST INSTALL ONLY ONE YOU WANT*
*IF NOT WORKING OR GIVES YOU ERROR, THEN ITS OPERATING SYSTEM LIMITATION*
*DO NOT INSTALL WM6.1 CABS ON WM6.5 OS AND VISE VERSA*
*AudioSwitch.cab/WifiNoStandby.CAB/Tested SRS.rar cabs are OPTIONAL and can be installed on both WM6.1 and WM6.5 OS*
Will you eventually release a dialplan supported version? I know this is a nitpick but I really use that file alot.
Yes, working on it. But will take time as hard to get time off. Thanks
Any reason why I can't install this...
Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate.
try installing remove certificate or first cab in Tested SRS.rar attached to get rid of this warning. are you installing on fresh OS. Thanks
Sorry, I'm still a noob at this. The Blackberry phones can make free calls via WiFi on T-Mobile when overseas. Will this program make the HD2 work the same way, by using minutes off my T-Mobile plan? Or do I have to put a cash balance into a 3rd party provider?
cu2cool said:
Sorry, I'm still a noob at this. The Blackberry phones can make free calls via WiFi on T-Mobile when overseas. Will this program make the HD2 work the same way, by using minutes off my T-Mobile plan? Or do I have to put a cash balance into a 3rd party provider?
Click to expand...
Click to collapse
I think you are slightly confusing things, with voip you can make calls from anywhere as long as you have internet access. Now the free bit is different, you must have a voip provider and their fees may vary. Now if tmobile is giving away voip subscriptions with their wireless then I need to find out about that, but I have never heard of it!
@dhillonbros - Much love for working on this!
So is this just an integration software like http://www.portsip.com/ to make internet calling seamless on the HD2?
cu2cool said:
So is this just an integration software like http://www.portsip.com/ to make internet calling seamless on the HD2?
Click to expand...
Click to collapse
are you sure that its an integrated solution
No, I'm not sure. That's just what it looks like. There's a whole thread for it here http://forum.xda-developers.com/showthread.php?t=508715.
I tried this on my HD2 but couldn't get it to work... I got errors in cprog.exe and gwes.exe on startup that I've never had before. When I tried to make calls it just went through the cell network or said "phone not connected" if I turned it off. The problem might be that I wasn't sure how to correctly register to my voip provider. Anyway, I didn't want to mess around with it and because of the cprog/gwes errors tried to uninstall - but uninstall didn't work.
Maybe I'll try again later. Does a proxy server have to be put in the settings, or is that for only certain setups? Would it usually be the same as the registrar server?
I installed todat without any errors. T-Mobile UK. The phone picks up my SIP landline service number but in the today screen after the no. it states no service.
I also appear to have two copies of the same software listed in my programs one called SetupVOIP the other sipConfig. Both on clicking setupvoip.exe
the dialer option page is blank.
looking forward to dumping fring but need a wee bit of help to get over the last hurdle.
this build is working better than older version on my Tilt. The issues I have are the dial plan, but I fixed that by editing the ipdialplan.xml file and removing all the number nines in it.
Second issue is that it looses registration after a while. I'm using AT&T 3G. Later on it is registered again but on and off throughout the day.
Installation ok but no voip on HD2
Hello,
The instalation is gonna well, but i have only the configuration tool, no additional items in today screen or phone menu, how can i switch between voip and standard calls?
br
nobisz
The configuration tool is used to set when your call will go through voip ("never", "whenever available", ...). From there it works transparently. For example, if you set to "whenever available" all calls will go through VOIP if it is able to register to the VOIP service, otherwise they will go through your cell network.
in the configuration tool, should I select TCP or UDP? I am using 3G
cesierra said:
in the configuration tool, should i select tcp or udp? I am using 3g
Click to expand...
Click to collapse
udp is the best option
@amcclean : Please try new cab. Problem fixed
interlope said:
I tried this on my HD2 but couldn't get it to work... I got errors in cprog.exe and gwes.exe on startup that I've never had before. When I tried to make calls it just went through the cell network or said "phone not connected" if I turned it off. The problem might be that I wasn't sure how to correctly register to my voip provider. Anyway, I didn't want to mess around with it and because of the cprog/gwes errors tried to uninstall - but uninstall didn't work.
Maybe I'll try again later. Does a proxy server have to be put in the settings, or is that for only certain setups? Would it usually be the same as the registrar server?
Click to expand...
Click to collapse
Mines flying on HD2, same as registrar server.
In Polish version of WM 6.5 you shall add "telefon" in command.txt file (Program Files/audioswitch) for the AudioSwitch to work....
Have a bit of a strange issue with the galaxy S I9000 and also the I9100.
I always connect to my car using the rSAP bluetooth profile, the first time I connect to the car I enter the 16 digit code and set the device to trusted when a notification message pops up, a minute or so later I get a notification about a phonebook request, I accept this and I get the phonebook transferred to the car.
For the first 3 times of getting in and out of the car I get the phonebook, missed, dialled and received calls. Then after that it will not transfer the phonebook, I can tell it's failed as I go into the memory and look at the imported contacts and it's 0, usually I have about 190 contacts.
It will only transfer the phonebook if I reboot the phone, then I get another three transfers of the phonebook and then it fails again.
The car I have is an Audi A7 with MMI 3G+, but this was also the case with a Q7 with MMI 3G, both times I used rSAP mode for the call quality and SMS facilities.
I think it's something to do with the pBAP requests, but I'm not sure what.
I might check in HFP mode if the issue remains.
Same issue over here, but in this case i'm talking about a SKODA with Columbus unit fitted. Probably the same unit as in your AUDI, since they are kind of family of each other.
I wonder ... how can I disable rSAP en us HFP instead on my SGS II ???
I am currently in Cananda. The phone is not rooted.
My phone is not making long distance calls through contacts. I have to manually dial a 1 and then the # for it to work.
On my old phone I had the phone settings (append prefix) to dial a 1 before every # automatically. On this phone I have
Settings>Call Settings>Plus Code Dialing>International Dialing (set to 1) and also there is a check box for domestic dialing. I have tried this checked and unchecked and it's not putting the 1 in of my contact #.
Any Ideas why it is not dialing the 1 prefix automatically?
Also I have tried Google Voice with the 1 and it doesn't work at all.
I figured I would try to be slick and use Dolphin HD in desktop mode and do it through gmail. It said I need to install the video and voice plug in, which isn't made for the Dolphin browser. Any ideas for a work around so I can get Google Voice to work or do I have to root?
i messed with a telus sim card yesterday. that didnt work for me. hopefully, i can mess with a bell sim soon.
I believe voice is only available in the US. Try pitting in the country code. Also try doing it from an actual browser on a pc to make sure it works for your region. If as i stayed above google voice is not available in canada and either ip shows from that region that could be your issue.
One simple way to find your ip is run the speed test app i think.
Sent from my MoPho
google voice works on my pc. no pro problems.
for the phone there is no country code. its considered long distance. it requres a 1. i have it set to 1 but its not putting it in.
the telus sim did work, just not the data because it was for a blackberry and they have black berry data. i was able to get voice to work. sim is unlocked.
Is it possible to make and receive calls ?i tried installing google dialer but it does not work?
Maybe with root we can? I dunno if the hardware will allow it.
GSM Voice and Data capabilities are disabled in the radio firmware. Teh device may not even have an amplifier for GSM. Even with root we wont be able to change that unless someone knows a lot about Qualcomm radio stuff and can add/modify the proper settings in QXDM/QPST . This is VERY unlikely.
Fongo works, so does csipsimple with a sip voip account.
I expect Google Hangouts will be fine too.
Same **** as the Nexus 7. What a scummy move.
Surely works but only on wifi (won't work on 4G LTE). Tried using it with my Ooma mobile app to place & receive calls without any technical issues.
I know it's not the answer to the question but, Hangouts works fine on LTE.
What about SMS?
I tried using Pad X to receive SMSs from my bank. I inserted a SIM card into it, installed Google Messenger SMS app and tried to get any SMS. I didn't see any notifications, but when I opened the Google Messenger once, I briefly saw the SMS appear in the program, but it disappeared quickly and again I saw an empty list of messages. Do you know if there is some service in this firmware that deletes any incoming SMS?
SMS works
Zoltan2 said:
I tried using Pad X to receive SMSs from my bank. I inserted a SIM card into it, installed Google Messenger SMS app and tried to get any SMS. I didn't see any notifications, but when I opened the Google Messenger once, I briefly saw the SMS appear in the program, but it disappeared quickly and again I saw an empty list of messages. Do you know if there is some service in this firmware that deletes any incoming SMS?
Click to expand...
Click to collapse
I have sent SMS back and forth to my phone from this tablet just fine. It simply worked.