i recently installed the official imate 1.72 rom, but i cant disconnect my gprs unless i hold the red end call button for a few seconds,as where i used to be able to hit the icon that said gprs next to my start bar on my rom before this.., is there anyway to restore that being i dont want my gprs on always it drains the battery so quickly?
try this litle program
you could try this, set it to automatically disconnect after 10 mins and give you the option to disconnect manually again
how do i install this file?
I am using the Qtek 1.72 ROM and GPRS can be disconected by tapping the reception-bars in the top menu bar on Today.
GPRS monitor is available in some Extended Roms, also in my ExtRom that you will find in this same sub-forum
Can any body help me with a windows Mobile 6.5 ROM update for HP Ipaq Data Messanger
I searched the entire Net for the ROm but its not available.Can any body help me?
Is there any other ROMs available for HP Ipaq Data Messenger ??Like Adrinoid or some thing like that. HP drains out battery very fast if we use third party programs for Visual enhancement (QVGA) .So any other ROMs with embedded visual enhancement available for Ipaq Data Messanger
I am just a beginner in this world .I am requesting the kings and Queens in this field to just pls help me out
Well, I'm sorry to say I haven't found a WM 6.5 ROM for the iPAQ Data Messenger and I've searched the whole net as well. I haven't seen any ROMs PERIOD.
I use SPB Mobile Shell 3.5.1 and I love it, yet I can't agree with you on the battery life. Well, atleast not anymore. After toying with a couple of settings my battery life is quite amazing to be honest. With some average usage I only get it down 25% a day.
That's with texting, phoning and playing a bit of Hexic. WiFi however REALLY drains the battery, but that's with every phone.
Also, don't lock the phone with the lock key. Put it in standby by holding the red key. It saves way more battery. (You'll still get calls and texts, don't worry)
Battery Live
Please, help the most of Data Messenger Owner... Because my battery's live is very poor! One day is a miracle!
What do you do, on the device, for unless 25% of battery by day?
nelsonf said:
Please, help the most of Data Messenger Owner... Because my battery's live is very poor! One day is a miracle!
What do you do, on the device, for unless 25% of battery by day?
Click to expand...
Click to collapse
Well.. I went searching for some settings and my phone and found I've set them as the following:
Settings > Personal > Phone
HP Bandswitch: Radio = Edge / GSM (I don't use 3G, so I got it always on 2G which uses a lot less battery)
Settings > System > Energy
Advanced: Turn App off when not used for 2 minutes
Settings > System > Backlight
On Battery: Turn backlight off when app not used for 1 minute
Backlight: On battery = Auto, on power = Auto
Advanced: Leave keyboard backlight on for 20 seconds.
Next to that I don't have any special settings. I think however that the 2G one helped the most.
Thank you for the replies
I am having a prob with HP ipaq messanger. My battery display full all the time. Because of this i cant knw when my phone will switch off ..Lol...Any Ideas ? And any ROM updates (WM 6.5) for HP Ipaqdata messanger?
Hi there!
First of all great forum, and very good informations all over!!
Hopefully someone can help me with this.
Im having a htc hd2 with the following settings on WM:
Os version
5.2.23128 (23128.5.3.8)
Manila Version
2.5.20161332.0
ROM version
chuckyRom WWE
ROM date
07.08.2010
Radio version
2.10.50.28_2
and i´m using andriod with
Modellnummer
Nexus One
Andriod version
2.2.1
Baseband-Version
15.40.50.07U_2.10.50.28_2
Buid Nummer
FRG83
so... the problem is, my batterie only runs for 6-8 hours... i installed as "SetCpu" "advanced task killer" and "battery Indicator" and changed the setcpu settings just like sujar did on this side ( http://forum.xda-developers.com/show...=734886&page=6 )
I also turned of "auto rotation", all animations are off, and my display timout is 1min... BUT -> "battery indicator" says, that 89% of my power goes away with my display...
I really hope, somone can help me with this, cause its very ****ty to recharge my phone every 8 hours...
looking forward to some answers!!
thx everyone!
What SD card you using ? ..
With my 8gb class 6 card, the Current Widget shows 3mA (stand by)
same build other card (2gb class 4) Current Widget shows 69mA (stand by)
How often do you use your phone? Sometime, w e forget that the battery drains fast because we're constantly on wifi or 3g and playing games.
turn off gps, wifi, 3g if not needed. boot android when keylights are on.
i can use android up to 20 hours with normal use (some phonecalls, internet, searching marketplace, checking twitter, weather, mails and so on every hour...)
maybe try another radio, another wm-rom, android build... 'search' is your friend there are so many threads/posts about battery...
hmm today the battery was emtpy after 5 hours... having 3 calls ( 3-6 minutes) and beeing most of the time in stand by modus...
@ bytefax: i have a scandisc 2GB... i dont know wich level... -> does that mean -> the bigger the sd card, the less gets the battery use?!?!
@azzzz: at the moment i try to use it only if its really necessary... just to check out how long my battery lives...
@tranquillo: i´ve already checked several posts, but what i´m looking for now, is someone, who got the same phone as I do and let me try his SetCpu settings...
übrigens... ich tu mir auf deutsch etwas leichter... danke schonmal für die hilfe... wär super wenn ich mein htc länger als 5 stunden benutzen könnt.
greez
Try to run CLRCAD and HARET whit the keypad lights on.
I had mattc 1.5b installed, in standby mode I was getting 5-9 mA drain (current widget numbers). I upgraded to mattc 1.7 it jumped to 20 mA drain in standby. did a clean install of 1.7, still 20+ mA drain. went back to mattc 1.5b and drain was 20+ mA in standby. switched to mdeejay sense build 20mA drain in standby, formatted card several times no change. turns out that android was only charging battery to 96%. once I charged the phone in windows mobile to 100% both mattc anb mdeejay roms get 7 mA drain in standby. each time I notice an increase in battery drain (standby) android does not charge battery completely (when android charges to 96% I get 20+ mA drain in standby, when android charges to 94% I get 70+ mA drain); I simply charge battery in windows and battery drain goes back to normal. 20+ hours with moderate usage, 40+ hours light usage.
Sent from my HTC Desire using XDA App
Fully Charge while Device is Off before first boot, then upon first boot go to terminal and enter these (without the quotes) and press enter after every line.
"su"
"rm /data/system/batterystats.bin"
Ensure that Keypad Lights are on when Haret is launched and you will be healed.
@ amcjungle -> terminal?!?!
Terminal emulator is an app. You can download it from the Market. A terminal is a way to gain access to a system.
@amcjungle: ok... thx for that info. Terminal is probably an app for windows mobile?
the last thing i dont really get to 100% is, what you want me to do with the Keypad Lights... they should be on ?!?
If you could make a screenshot or explain it, this would be christmas like!!
best wishes and thx for the help!!
spreiza said:
@amcjungle: ok... thx for that info. Terminal is probably an app for windows mobile?
the last thing i dont really get to 100% is, what you want me to do with the Keypad Lights... they should be on ?!?
If you could make a screenshot or explain it, this would be christmas like!!
best wishes and thx for the help!!
Click to expand...
Click to collapse
Terminal is an app for android. What you would want to do is charge your phone completely while off or in windows mobile. Probably better while turned off, although that part I cannot confirm. So with your battery charged to 100% just press the call button or something to activate the keylights. so that call, windows, back, and all other buttons are lit. While they are lit up start android. They will turn off, but we want them on when haret loads. Once into android open terminal emulator or download it from the market. Then type in su to gain super user access and then the other command to clear the battery charge memory.
At times my standby voltage will go to 120ma and up. When it happens I open the process button on the Weather and News widget and I close every process that is running. After that I hold down the power button until the option to Power Off shows up on the screen. Once I power off the phone I just restart Winmo and Android normally and my standby voltage goes back to 6ma.
If I let it run at >120ma standby voltage the battery will be drained within 5-6 hours every time.
chadhayson said:
At times my standby voltage will go to 120ma and up. When it happens I open the process button on the Weather and News widget and I close every process that is running. After that I hold down the power button until the option to Power Off shows up on the screen. Once I power off the phone I just restart Winmo and Android normally and my standby voltage goes back to 6ma.
If I let it run at >120ma standby voltage the battery will be drained within 5-6 hours every time.
Click to expand...
Click to collapse
Dont use task killers unless you know what you are doing. They are mainly for apps that wont close (freeze) or apps that you yourself have opened. If you close system prosseses like weather, news, messaging, and so on you are only making things worse.
That's why you need to shutdown and restart phone after you close them. When you restart the phone the needed processes will be started too.
I've tried this with task killer and it does nothing, the only luck I've had has been with the process toggle on the Weather and News widget.
thx for giving me this detailed explanation!! i´ll try this and let you know how things are doing!!
Hi, I've tried exactly the method you said but when I type in the last line (ending batterystats.bin) it says its not found.
Have I done something wrong?
Cheers
Sent from my HTC HD2 using XDA App
QA5IS said:
Hi, I've tried exactly the method you said but when I type in the last line (ending batterystats.bin) it says its not found.
Have I done something wrong?
Cheers
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
are you putting in a space after rm?
rm(space)/data/system/batterystats.bin
if you did then you do not have this file
when exactly are the keypad lights supposed to turn off? Mine seem to stay on indefinitely.
Still having Probs
Hey there. I,m having some issues with my battery too.
My Build belongs to Bangster (v 1.5) (great work) on ChuckyDroidROM Lite with Radio 2.15.50.14 running on Scandisk 8 gb class 2. Michi R11 AXI kernel.
I do not have several Sd cards to test consuption.
I read the Thereads about heavy battery drain for the last 4 days.
I tryed differend Radio Roms, i tryed different WM Roms (Flashing VBNROM AGAIN at the moment)
I tryed to fix the Keypad Lib, loaded my battery in win/off to 100 %, switched off all background services except 3g, do NOT have any taskillers or something (Android isnt meant to let tasks get killed by user i think)
I tryed to boot with Keypad lights on and use Set CPU as recommended with no overclocking.
i Use brightness lvl 25 %
BUT my battery drains at last with 60 ma (current widget) within 5-6 hours nearly to empty.
I dont know any further.
I rellay need my Phone with Sync to Google for more than that. Can't load my phone on German Autobahn (i'm slightly often there)
BUT i had a very good Battery life with mccmjohn's 2.5/VBN/2.14/Michi R11 in the end it was not stabel for me.
I dont have the time to try all the Builds with different Kernels in combination with all the WMRoms.
Can Pls someone help me????
PS: I dont want to annoy any of the devs, awesome work they did
i'm LeoDroid user since first Darksone build
Hi.
Im running Energy CHT2.0 Dinik Rom plus a handful of other apps.
I tend to find that after running iGo8 or PortSip or Android, that the HD2 has real trouble with the boot sequence and seems to hang and max out at 100% cpu.
i use battclock to display cpu %, but its frustrating when you have to remove the battery 24 times waiting for the HD2 to boot properly once.
Other times it will runs for a week without a reset.
The Startup menu shows the following:
BTtrayCe.exe
Battclock
Spb wireless monitor service
Memmaid_tweaks
Email on 3 (push email)
Any trouble shooting suggestions to narrow things down to find the cause?
Cheers