Related
I'm looking for a car-mount that will fit the Wizard.
I don't want a speaker or any connectors, just a mount, preferably with lots of foam so it doesn't squeek and rattle. I also don't want a 'window sucker' model.
I've googled it but can't find anything that says it will work with the Wizard.
Anyone seen/got one that will fit?
Me to.
I've been using Brodit mounts for the last couple of years but I keep swaping cars (between my own and a company one) recently.
This is the most promising one I've found so far.
http://www.arkon.com/pdamount.php
I like the look of this one because when I get a better case (flip type) there should be room to mount with it left in side.
Nice
Good range. Arkon only do a 'sucker' windshield mount for the jam/k-jam though.
Still looking.
Is there a UK site with them?
Any ideas when K-Jam accessories will appear? I want some screen protectors and don't like cutting bigger ones down to size.
Boxwave do some screen protectors and do ship to the UK.
http://www.boxwave.com/products/easyfinder/buy-best-i-mate-k-jam-accessories_734.htm
The Arkon kit CM910 has a vent, sticky Dash and suction cup mount included.
http://www.globalpositioningsystems.co.uk/arkon-universal-pda-mount-description.html
I think expansys do some Arkon Kit.
You might also want to look at
http://www.handnav.co.uk/product_details.php?id=126
http://www.globalpositioningsystems.co.uk/the-clip-company-vent-mount-description.html
Edit : I forgot to mention that Halfords do a expanding Phone Vent mount I think it's about £15.
Brodit is introducing a passive mount early this month (presumably 1st half).
Although I have not found any retailer selling it at the moment.
Cool I''ve been holding out for that one But I might get a cheap suction holder for the other cars I use.
I just bought a cheap HR Richter mini holder while I await a Brodit active holder.
Doesn't make sence for me to buy a passive holder now and an active holder in a while.
Brodit has released their mount for the wizard. I started a thread on HoFo
http://www.howardforums.com/showthread.php?t=764452
Brodit has released their mount for the wizard. I started a thread on HoFo
http://www.howardforums.com/showthread.php?t=764452
I'm using a plain old simple magnetic car holder from carphone warehouse which works just fine for me. £5 from carphonewarehouse - job done.
I'm using a plain old simple magnetic car holder from carphone warehouse which works just fine for me. £5 from carphonewarehouse - job done.
eayuwna said:
I'm looking for a car-mount that will fit the Wizard.
I don't want a speaker or any connectors, just a mount, preferably with lots of foam so it doesn't squeek and rattle. I also don't want a 'window sucker' model.
I've googled it but can't find anything that says it will work with the Wizard.
Anyone seen/got one that will fit?
Click to expand...
Click to collapse
Halfords has a universal holder for £14.99 that held my Vario very securely when I tried it in the shop and did not obscure the speakers or the USB port. It came with a window sucker and a sticky pad option. I'm not sure if there were clip or magnetic options as well.
Tesco have a universal holder for £4.97 that clips to the air vents. It was in a bubble pack and I could not tell whether it would open wide enough. But I don't suppose Tesco would object to a refund if it didn't, since there is no way to try before you buy.
Further to my post above I just bought a universal holder from a Vodafone shop for £5.00. It has air vent and sticky pad options and a slick/smooth adjustment operation - better than other units I tried for £10+. There is a gap at the bottom for headphones and USB charging if needed.
I don't like the idea of blowing hot air all over the back of the phone for hours in the middle of winter so I've plumped for the sticky option. I have yet to test it on the move with the Vario attached. I'll leave it overnight for the adhesive to stay stuck and then see how it goes.
ClearTouch Crystal, Qtek 9100 from Boxwave.
Any one who have tried that cleartouch crystal protection? Waitin for mine to arrive :/
q-biq said:
ClearTouch Crystal, Qtek 9100 from Boxwave.
Any one who have tried that cleartouch crystal protection? Waitin for mine to arrive :/
Click to expand...
Click to collapse
I've got one on my wizard and it looks great. I messed the first one up and i stuck the wrong side down on the screen and it gave an oil kind of effect on the screen, i'm sure the peel off sticker was on the wrong side, anyway i binned that and used one of the others i got and now it looks and fits great. had it on a few weeks now and its not scratched yet.
my last boxwave screen protector lasted over a year.
Hi all,
I have Brodit mounts available for the Mini (Wizard, Mini s) inc either a gooseneck mount or a brodit car specific pro clip.
Please feel free to visit www.dsldevelopments.co.uk for further details
Thanks, please PM me or email me if you have any questions or need any images,
Thanks
Dave
I've got this one and its fine!
http://cgi.ebay.co.uk/W-W-NEW-UNIVE...840540172QQcategoryZ10364QQrdZ1QQcmdZViewItem
Hi Stunno,
Am I corect with that one off ebay - the handfree and power socket are both obscurred by the base of the cradle?
Scott
This is the ONE! I jst got off the phone with www.proclipsusa.com, she is calling brodit to find out if it's in the shipment that's on it's way. I'll wait.
KJAM active mount
slewis1972 said:
Hi Stunno,
Am I corect with that one off ebay - the handfree and power socket are both obscurred by the base of the cradle?
Scott
Click to expand...
Click to collapse
No, the "base" only sticks out 3 or 4mm
Hi ive just moved from the TREO600 to an O2 xda mini s and i hate the belt clip case that comes with it , anyone know of a simple slip case (like the treo) that works with the xda/kjam/dopod 838/mda vario ive done some googleing but cant find anything
thanks
Matt
www.tuff-as-nuts.com
Good cases, no complaints, configurable too.
Cheerio
Howard
Nice one they look perfect , though the case that fits my device has been suspended
I use a Magician Case, (I-Mate JAM) I used to have the Magician and this case was very good for it, the mini-s fits snuggly in it now and it has stretched a little over the course of the year I've had it.
Cheerio
Howard
ok here are some suggestions while you look for your perfect slip case... by the way are you looking for a horizontal one or vertical one?
--
ipod mini sock [it stretches... used this the first few days I had my wizard]
one of those oakley shades cases cum wipes [dual function there]
--
I think most SE P800 or P900 cases would fit the mini S [well actually from comparison shots it even looks like Treo cases would fit as well]
--
currently I am using a aluminium case for my wizard.
Hi ive tried the treo and an ipod case they are both a quite tight, i could attempt a stretch but id prefer a solution that doesnt need modding Oh and im looking for a verticle slipcase just like the Treo's no belt loop etc justa simple case.
Krusell
The Krusell Cabriolet ought to be perfect from what you're describing. It does come with a belt clip functionality but since it's Krusell you can replace this with any one of a number of options or simply remove it altogether.
There's a post over at PDANut listing all the case options.
i know its a little late, but im looking for a slip case as well and came up with this
Slip case
Timbuk2 Smartphone case. Fit perfectly
http://www.timbuk2.com/tb2/retail/catalog.htm?categoryId=47
I got mine from Palm store
http://web.palm.com/products/Category.jhtml?id=180042&cat=b100016
Go to boxwave.com and make a request. They claim that if they get enough requests they release the product. Go to the link at the bottom to request a product for a device and then make sure "Flexiskin" is checked. It is probably a good idea to mention all the Wizard's aliases (MDA Vario, Qtek 9100, I-mate K-jam) so they see it is a device in alot of user's hands. I owned one of these for my Treo and it was outstanding.
Just an FYI to everyone:
I got my Krusell Verticalic Case today and it works GREAT for the 8125. You need to order the small-wide size (Model 94178). The websites don't list it as compatible, but if you pull out your ruler and measure your phone (believe it or not Cingular has the width wrong) you will see that it is a perfect fit for this case. I have a spring clip to wear with my jeans and a swivel clip to wear with my nicer work clothes.
I am psyched! I had been waiting for this thing to come in, as I was convinced it would fit despite it not being listed as compatible.
Also-if anyone is looking for a good place to get one of these...I can recommend sfplanet.com. I ordered mine from them on Sunday and I got it today (MN to SC). They also did a great job with some special instructions I left in the comments box.
Two thumbs up for the Krusell case and two thumbs up for SFPlanet.com!!!
http://www.krusell.se/productUni.ph...=616&category=4
http://www.sfplanet.com/index.cfm/f...atid/0/id/59211
SuperDodge said:
Just an FYI to everyone:
I got my Krusell Verticalic Case today and it works GREAT for the 8125. You need to order the small-wide size (Model 94178). The websites don't list it as compatible, but if you pull out your ruler and measure your phone (believe it or not Cingular has the width wrong) you will see that it is a perfect fit for this case. I have a spring clip to wear with my jeans and a swivel clip to wear with my nicer work clothes.
I am psyched! I had been waiting for this thing to come in, as I was convinced it would fit despite it not being listed as compatible.
Also-if anyone is looking for a good place to get one of these...I can recommend sfplanet.com. I ordered mine from them on Sunday and I got it today (MN to SC). They also did a great job with some special instructions I left in the comments box.
Two thumbs up for the Krusell case and two thumbs up for SFPlanet.com!!!
http://www.krusell.se/productUni.ph...=616&category=4
http://www.sfplanet.com/index.cfm/f...atid/0/id/59211
Click to expand...
Click to collapse
Your links are broken.
For my TP2 I'm looking for a solution for my case problem: I want to protect my TP2 in a case, but also want to be able to use it in a car (for navigation and hands free calling).
For the TP2 there seem to be two kinds of cases: one is more or less the one that came with my TP2, these are useless, because you have to take the phone out every time you want to make a phone call. The other type are the ones made by PDair, Krusell and others, where the phone can always stay in the case and even the keyboard can be used. However, it is way too much work to take the phone out of the case every time I want to use it in my car.
Today however, I may have found a solution: it seems that Krusell is selling a car holder in which the TP2 will fit while it is inside the case! And when I use their springclip (instead of the rotating round swivel knob) inside the car holder, it is fixed against rotation as well.
As an added bonus, they even have a bike holder, so I can use the TP2 on my bike as well!
Does anybody have any experiences with or comments on this idea?
Hi all.
I'm looking for a car holder for my TP2. Can anyone make a recommendation? I'm UK based and I'd rather not pay silly amounts on delivery other than that I'm open to all suggestions?
So far I've seen and like the Boxwave car holder. Only problem is they're a US company and they charge quite a bit for non-US delivery.
Thanks in advance
I have this one http://www.amazon.co.uk/Brodit-car-...?ie=UTF8&s=electronics&qid=1254855076&sr=8-24
I combined it with my Richter holder (this one http://www.amazon.co.uk/HERBERT-RIC...3?ie=UTF8&s=electronics&qid=1254855152&sr=8-3 ) because I had a HTC Touch Pro before.
I have the CM929-S: Swivel Vent PDA Car Mount from Arkon that I got from eBay a while back for around $10. It works pretty well with the TP2, and I like it better than suction-cup mounts because it won't fall off. Although, I do like the idea of a unit-specific mount if I could find one.
http://www.buybits.com/product/sku_ark-swivel-pda-vent.aspx £9.99
neonoxDE said:
I have this one http://www.amazon.co.uk/Brodit-car-...?ie=UTF8&s=electronics&qid=1254855076&sr=8-24
I combined it with my Richter holder (this one http://www.amazon.co.uk/HERBERT-RIC...3?ie=UTF8&s=electronics&qid=1254855152&sr=8-3 ) because I had a HTC Touch Pro before.
Click to expand...
Click to collapse
Thanks neonoxDE!
the Richter holder looks perfect!
Wait Spartan: The richter holder I posted is for TOUCH PRO 1 not Touch Pro 2! You can use the Richter "arm" (don't know the right word) and add the brodit holder.
if you are going to go Arkon, may as well go with the powered mount
http://www.arkon.com/poweredpdamount.php?selFeat=usb_mini
the speaker is fairly useless... the TP2 speaker is louder
does have 2 USB charge port though, 1 at 1.2a (fast charge!) and another at 600ma
a little thicker than the none power version but worth it
so you can charge 1 phone and another device... or a friends phone too
I combine it with a proclip vechile mount and its perfect!
I just got the box wave kit. The quality is good and you can fit the TP2 in landscape with keyboard out and portrait.
They dont give you a dash disk to mount on your dash but suction cup is huge should mount on any window. They also give you a HVAC vent hook as well.
I'd give it a 7/10.
Try This
http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Looks decent though passive only.
neonoxDE said:
Wait Spartan: The richter holder I posted is for TOUCH PRO 1 not Touch Pro 2! You can use the Richter "arm" (don't know the right word) and add the brodit holder.
Click to expand...
Click to collapse
Thanks neonoxDE but there's also a TP2 version
dezoris said:
I just got the box wave kit. The quality is good and you can fit the TP2 in landscape with keyboard out and portrait.
They dont give you a dash disk to mount on your dash but suction cup is huge should mount on any window. They also give you a HVAC vent hook as well.
I'd give it a 7/10.
Click to expand...
Click to collapse
Thx for the tip
SpartanGrey said:
Thx for the tip
Click to expand...
Click to collapse
I also have the Boxwave kit. Good quality. I have it attached to the vent. It was a pain getting it hooked up but once it was on it was great.
TP2 now functions as an easily accessible hands-free phone, mp3 player, and gps system. Man, I love this thing
I ordered this one
http://www.gpsforless.co.uk/product_details.php?id=16170
There were two on the site, and this one LOOKED less sturdy which was my only concern. Having said that, it turned up today and whilst I have not put it in the car yet, I am well pleased.
Much sturdier in reali life than the pictures suggest. Good selectioon of attachments etc. Way better than the ebay one I had for my Touch pro.
I was just about to ask the same question. Don't you just wish there was a genuine HTC one like the sexy HD2 mount...
s0leFUNK said:
I also have the Boxwave kit. Good quality. I have it attached to the vent. It was a pain getting it hooked up but once it was on it was great.
TP2 now functions as an easily accessible hands-free phone, mp3 player, and gps system. Man, I love this thing
Click to expand...
Click to collapse
Thanks I would be more than happy to buy the Boxwave goods but the shipping is too high. I'm UK based - it almost doubles the purchase costs
crazyC said:
I ordered this one
http://www.gpsforless.co.uk/product_details.php?id=16170
There were two on the site, and this one LOOKED less sturdy which was my only concern. Having said that, it turned up today and whilst I have not put it in the car yet, I am well pleased.
Much sturdier in reali life than the pictures suggest. Good selectioon of attachments etc. Way better than the ebay one I had for my Touch pro.
Click to expand...
Click to collapse
This looks more promising! Thanks!!
pjsmith said:
I was just about to ask the same question. Don't you just wish there was a genuine HTC one like the sexy HD2 mount...
Click to expand...
Click to collapse
To be honest I've been very disappointed with the lack of (widely) available accessories for the TP2....
velcro
spartangrey said:
hi all.
I'm looking for a car holder for my tp2. Can anyone make a recommendation? I'm uk based and i'd rather not pay silly amounts on delivery other than that i'm open to all suggestions?
So far i've seen and like the boxwave car holder. Only problem is they're a us company and they charge quite a bit for non-us delivery.
Thanks in advance
Click to expand...
Click to collapse
i use velcro , it's cheap and works fine
I just ordered this cheap nasty thing from ebay:
http://cgi.ebay.com/ws/eBayISAPI.dl...Category=20336&_trkparms=algo=LVI&its=I&otn=2
If it's rubbish, I'll throw it away... you can't really argue for $10!
p_shep said:
I just ordered this cheap nasty thing from ebay:
http://cgi.ebay.com/ws/eBayISAPI.dl...Category=20336&_trkparms=algo=LVI&its=I&otn=2
If it's rubbish, I'll throw it away... you can't really argue for $10!
Click to expand...
Click to collapse
Any report on this yet?
I buyed this one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180422993926&ssPageName=STRK:MEWNX:IT
As shipped form Hong Kong it will take more than a month to arrive
Report later...
Hi
Does anyone know if there is someone that makes a bike (handelbars) holder for the Blackstone?
edit
I did find some on with google search, but does anyone have any experience??
yesterday, i have ordered this:
http://www.dantotec.de/shop/Richter...HD-T8282-Blackstone-100-inkl-Halteschale.html
now i have to wait for delivery
Please post your experience when you have tried it.
bike holder
Hi, I am interessted in a solid Bike holder too and was looking for the whole day. I found this in ebay germany, the producer is Haicom, tomorrow I will order.
I want to use it only in landscape mode and for me it looks appropriate for this. The only thing is that I don't trust the connection between the HTC cradle and the Handlebar attachment, so perhaps I have to stick it with instant glue, but all the other holders I saw don't have such big retaining clips in the cradle like this one.
also interested
Guys
I'm very interested in this too, looking forward to hearing experiences from you. I need to retire my Ortleib pouch!
my experience so far
The cradle i ordered is a little bit bigger then the touch hd and the connection between handlebar attachment and the cradle is a little bit unsteady like i thought but no problem. I sticked felt pads on it and its very very solid now, also a good method to avoid scratches. I've made a little video that you can see how solid this is now. So I think this is a good one only after you stick those felt pads.
Sweet it looks pretty sturdy.. If you can get it to stay in one place on the handel bars then thats the one for me
handle bars
I've mounted the cradle on my bicycle, it doesn't move from its place.
There is a rubber layer at the attachment.
Today i have received my bike holder (http://www.dantotec.de/shop/Richter...HD-T8282-Blackstone-100-inkl-Halteschale.html)
it looks realy safe (not testet in action)
i have "shaked" the holder with my touch hd over my bed and it dont pull out (i hope you know what i mean ^^)
and the size is very good, not too small and not too big "like a second skin"
in the package you get also 3 rubber for more security...
i think i can recommend this bike holder
i wait for this (cause its not in stock): http://www.dantotec.de/product_sear...417fff&query=HRI01686&x=30&y=17&channel=001_0
this product is recommended from the manufactorer, it should guarantee more stability...
I have combined this:
http://www.amazon.de/Motorradhalterung-für-Lenkstange-inkl-Schwanenhals/dp/B000RGVNK8/ref=pd_cp_ce_2
(I do not have the space for the HD directly over my handle so I needed some distance...)
with that:
http://www.amazon.de/HR-Klemmbacken...=sr_1_3?ie=UTF8&s=ce-de&qid=1274939042&sr=1-3
(Had this one already for my car.)
I did not buy them from amazon (I forgot where I got them), but they are original from HR.
Just an advice: The first time I used my device on the bike, I lost my stylus - it must have gotten loose due to some vibrations, and it was only on a paved bike path, not cross country-like vibrations...
So better remove your stylus or find some way to fix it.
I had the luck that it was on my way to work, and it waited for me to pick it up on my way back not far from my home...
The Whistler
Ebay is perfect for this stuff.
la3bna said:
Hi
Does anyone know if there is someone that makes a bike (handelbars) holder for the Blackstone?
edit
I did find some on with google search, but does anyone have any experience??
Click to expand...
Click to collapse
hello la3bmna
i have this one http://www.otterbox.com/pda-cases/1900-series/1900-series-pda-case/ is a cracking unit
jez
A cradle for a bike with exposed screen like that is asking for trouble. If you go over a bad road or bump etc it can become lose or if you are in a crash there is no protection. I found its safer to get one of them arm band phone protectors and strap it down. seems to work for me
A|ex said:
A cradle for a bike with exposed screen like that is asking for trouble. If you go over a bad road or bump etc it can become lose or if you are in a crash there is no protection. I found its safer to get one of them arm band phone protectors and strap it down. seems to work for me
Click to expand...
Click to collapse
learn how to ride a bike and dont crash and it cant come loose
jayjay101 said:
The cradle i ordered is a little bit bigger then the touch hd and the connection between handlebar attachment and the cradle is a little bit unsteady like i thought but no problem. I sticked felt pads on it and its very very solid now, also a good method to avoid scratches. I've made a little video that you can see how solid this is now. So I think this is a good one only after you stick those felt pads.
Click to expand...
Click to collapse
Wich clip did you order with your haicom Bike Holder? I cannt find a T8282 version?
I have ordered that bike holder for the HTC Touch HD (T8282), just take a look once again. It is definitly from Haicom for the Touch HD
... I found the designation for the clip its "HI-027"
jayjay101 said:
I have ordered that bike holder for the HTC Touch HD (T8282), just take a look once again. It is definitly from Haicom for the Touch HD
... I found the designation for the clip its "HI-027"
Click to expand...
Click to collapse
I can only find the carholder for the T8282, not the bikeholder.
Seems to me that no one sells this bike holder in Netherlands. Here is an ebay seller in Germany, you can order there if you don't mind.
http://cgi.ebay.de/Fahrradhalter-Ha...482571585&po=&ps=63&clkid=7404611744228772107
jayjay101 said:
Seems to me that no one sells this bike holder in Netherlands. Here is an ebay seller in Germany, you can order there if you don't mind.
Click to expand...
Click to collapse
jorisdekloris said:
I can only find the carholder for the T8282, not the bikeholder.
Click to expand...
Click to collapse
I bought a bikeholder at Saturn. They have several bikeholders from Hama and not expensive. Mine is even waterproof.
eddyve said:
I bought a bikeholder at Saturn. They have several bikeholders from Hama and not expensive. Mine is even waterproof.
Click to expand...
Click to collapse
I'll take a look in the Saturn.
jayjay101 said:
Seems to me that no one sells this bike holder in Netherlands. Here is an ebay seller in Germany, you can order there if you don't mind.
Click to expand...
Click to collapse
If i cant find one in the Saturn i'll order one from Germany.
Thanks for the both of you.