Hello,
the folllowing thing happened to me :
- at a certain point i couldn't charge my xda anymore, and so the battery went down. no light appeared when connecting to the charger. and i couldn t start the xda anymore off course.
- i read the articles about the fuse which could be hit; and because i couldn't reach the spare fuse for the external battery, i simply soldered a solder bridge in the place of the fuse, as someone mentioned in another topic. i put everything together, but still, totally dead : no lights.
- now i don't know if this xda is totally lost or if i can do something about it. it could also be the charger which is broken. it doesn't get warm when i put it in the 'wall'. how can i check this ?
- if anybody has hints about what to do next or just trow the thing away, you could make my day ! many thanks in advance.
thomas.
You could try a usb sync charge cable, it maybe the battery has died completely also. Did you test the fuse before bridging the connection? Have you tried using the hard reset button, this is in the hole next to the headphone socket.
- i don't own such a cable, but maybe i can find it somewhere, as the qtek 1010 is not very widely spread in belgium, i could search over the internet instead of a shop.
- i did not test the fuse before removing it and soldering the bridge. which is probably quite stupid of me. the hard reset button didn't do anything and still doesn't.
- the battery could be dead also, but should'nt i see a light flashing when i insert my charger ? so my 'forecast' is that it could be a charger issue.
- maybe i could test it with someone elses charger here in belgium. i live in ghent, so if anyone is from near my place, i am willing tot travel to test your charger. i won't steal it, but then i can buy a new one over the internet. :wink:
if anybody has other testing methods for the charger, please let me know.
a simple question : should the charger get hot when plugged in ? because mine doesn't and i don't know if it ever did.
thanks for your answers ! and hoping to reanimate soon.
The charger would normally feel warm when plugged in.
err my charger's pretty cold actually...
Mine is too now that I checked but it gets warm while charging, my ipaq charger is warm when plugged in and not charging, any idea why this should be.
Can anybody help me with the following ?
i'm quite stuck in the thinking concerning the problem ...
is there anybody in europe who has a tech experience with the qtek 1010/xda and thinks he could arrange the problem i mentionned above ?
or is there anyone who knows such a person, because he had the same problem.
I want to let someone look at it, with, off course, a possible compensation in money. Is there anyone who could tell me how much this more or less could cost ? [because i am a student and use the phone mainly for testing purposes]
Thanks in advance !!! t.
Maybe a friend at college has a simple voltage tester you could use to test the charger output, the charger I have has a removable adaptor at the end of the lead, with this removed you are left with a simple barrel type connector which is very easy to test. If you cannot get a replacement charger and yours is faulty, send me a pm, and I will post one to you.
Anyone in europe who can repair my xda 1 ?
Hello,
i'm still stuck with a broken xda, as described above. Is there anyone in europe who has spare parts of the xda and is willing to repair this item ?
It would be great if anyone could help me. Please let me know what arrangments can be made. I am living in Belgium, Ghent.
thanks in advance.
thomas
Testing powersupplie
Hi!
I don't know if this could be helpfull, anyway: If you still think this is a charger-problem, then you could modify your cradle as described in the wiki. http://wiki.xda-developers.com/index.php?pagename=WallabyCradleMod
And another thing as well. I noticed that the main charger is making a loud fuzzing sound when connected to power, so I guess that if your's silent and cold, it might be broken. (Which is not too problematic as it can be easily bought on eBay.)
What power-connectors do you use in Belgium? I have a spare-adapter that I'm not able to use as it does not fit in the Norwegian connectors...
Good luck with the phone!
Same Problem after plugging in my ipaq 3970 gps reciever
I got the Same Problem after plugging in my ipaq 3970 gps reciever, anyone got a clue where to go with this??
iPaq pinouts...
The pin-outs is not the same on the xda and the iPaq, so power in the wrong direction may have damaged the mainboard. And that would be differcult to repair I think!
Here's my issue.
I can no longer plug my charger cable into my HD2 unless I hold it in with excessive force. I understand it to be a fault with the port, but I don't know how it occured or how to fix it.
Is there ANY other way to fix it other than taking it for repairs?
Thanks for any help.
Hi all
can someone please help me out with this
I think i broke my usb connector,, it doesn't charge when I normally put my mini USB in the connector,, i need to make a construction to make it charge..
it does wiggle a little en it only charge when the mini usb cable is pushed up in the connector..
so i really think it's broken and i've search everywhere for a reparation
but i didn't find any person to make this..
i also broken my lcd i think cause the touchscreen works great and it show black bleeding...
can someone in the NEtherlands around the neighbourhood of Zuid-Holland help me and does somebody now what it is with the connector..?
thanks
I thought my USB connection might be faulty too. Still don't know. Posted my reply:
http://forum.xda-developers.com/showthread.php?p=9189098#post9189098
Anyone had any issues with the Micro USB port and charging, my port has become really loose to the extent it does not charge sometimes.
Anyone know if this can be fixed, or what I need to do to resolve this.
s2dh said:
Anyone had any issues with the Micro USB port and charging, my port has become really loose to the extent it does not charge sometimes.
Anyone know if this can be fixed, or what I need to do to resolve this.
Click to expand...
Click to collapse
first try with a diff charger to confirm the issue, if persists then u need to replace ur 'Micro USB port' for sure,for which i would suggest u to visit an Samsung service center to get it done
I am facing this charging issue since morning. Charging is getting disconnected and then reconnected continuously.( Charging is fluctuating) I have tried using other cords and also using the original xaiomi charger for redmi 3s. It has the same issue with all the chargers. Can anyone tell me if it's a hardware issue or software issue? If it's hardware issue then what can be done about it? Please help.
I have this issue when using the USB port in my brother's car but I have no idea why it happens. It never happens anywhere else but yet no one else has this issue in the same car. Weird.
It might be an amperage type issue but that's just a guess. Like you, I would love to know what it is.
RN3P Kate.
I have the same problem. I think is hardware problem, but i cant find replacement.
Did you managed to fix the problem? I'm facing the same
This seems to be a hardware problem. Maybe the charging pin is damaged. Go to Mi service center, they might b able to help you.
I have solved this problem
Turn on USB debugging from developer mode then put your phone on charging for 1 full night in switched off mode ...
It will charge normally
.
.
.
Tell us if its work for u ... your feedback will help others
its work for me after researching for 3 days