Hi guys,
I flashed WM 6.5 to ma Atom. But right now, it's not working, even bootloader mode. I tried many times CAMERA+ RESET (stylus) then inserted batt. But still nothing happens. Do you guys know what shall i do? I think ma device not dead, because - when i connect to charger plug, the LED light is blinking as i insert batt.
Thanks, waiting your advices.
Eku
im also having the same trouble too...i was flashing my atom using SD card flashing method but then halfway through it it went blank screen...so i took off the battery...now it cant even be switched on...is there anyway to save it now??please please...any assistance is much appreciated...thanks!!!
+1 with the same problem... i searched the forum n found this guide
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
but i couldnt rly figure it out...
adnan_efe said:
+1 with the same problem... i searched the forum n found this guide
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
but i couldnt rly figure it out...
Click to expand...
Click to collapse
you must have basic electronics skills to build the cable from the article and connect to your phone via self made cable with pc and then using the files and drivers attached you can restore your boot loader..if you aren't sure that you can do it by yourself I suggest to send your phone to phone repair shop, where probably they can do this.
Related
Hi,
My XDA II was up and running until I wanted to flash it with Wm2003se.
I not sure if the battery is fading out or what but the flash didn't conplete and I am left with the "serial 1.06 boot screen" I have tried numerous times of taking out the battery, letting everthing drain out and trying again. but it still goes back to the serial screen. Also activesync won't recognize the device and Windows XP picks it up as "Unknown Device". When I try and reflash it, I get the "communication error". Could someone dump thier Rom and/or instruct me on how to flash my device using my SD card?? Or if there is another way to revive my XDA II, I am open to anything. Thanks!!
Shane
Hi
Am also facing same problem on my O2 xdaII..it always shows serial v1.02
can any one help us pls..
tks isse
Hi
same problem whit MDA ll t-mobile de.please help
shane said:
Hi,
My XDA II was up and running until I wanted to flash it with Wm2003se.
I not sure if the battery is fading out or what but the flash didn't conplete and I am left with the "serial 1.06 boot screen" I have tried numerous times of taking out the battery, letting everthing drain out and trying again. but it still goes back to the serial screen. Also activesync won't recognize the device and Windows XP picks it up as "Unknown Device". When I try and reflash it, I get the "communication error". Could someone dump thier Rom and/or instruct me on how to flash my device using my SD card?? Or if there is another way to revive my XDA II, I am open to anything. Thanks!!
Shane
Click to expand...
Click to collapse
Come on....Somebody help us, we have a crisis club going on here!!!
did u guys follow all the intructions in upgrading the rom?
try this
disable activesync by ctrl+alt+del and kill wcescomm.exe by end process
make ur phone in bot screen
put ur phone in the cradle(with the power supply, so that ur bat will not drain).
usb should be in the display and not serial
make sure the 3 files(ms_ , radio_ , and nk) are in the same folder with himaupgrade.exe
run himaupgrade.exe
Wait about 5 processes i think. after the pc will let u know if it is done... get ur xda from the cradle and hard reset it (power button+reset button)...
if it doesnt work still im sory, im just a newbie, i just did mine.... maybe u should read more...
shane said:
shane said:
Hi,
My XDA II was up and running until I wanted to flash it with Wm2003se.
I not sure if the battery is fading out or what but the flash didn't conplete and I am left with the "serial 1.06 boot screen" I have tried numerous times of taking out the battery, letting everthing drain out and trying again. but it still goes back to the serial screen. Also activesync won't recognize the device and Windows XP picks it up as "Unknown Device". When I try and reflash it, I get the "communication error". Could someone dump thier Rom and/or instruct me on how to flash my device using my SD card?? Or if there is another way to revive my XDA II, I am open to anything. Thanks!!
Shane
Click to expand...
Click to collapse
Come on....Somebody help us, we have a crisis club going on here!!!
Click to expand...
Click to collapse
I assume you did a hard reset?? In the past three days I have gone from Windows Mobile 2003 >>> Windows Mobile 5 >>> back to Windows Mobile 2003 SE (SIN's magic version available here on XDA-Developers) which I like best of all (for many reasons, mainly speed and reliability). As someone else stated, you need to put it in the cradle AFTER deleting the old profile in ActiveSynch on the PC. Oh, and make sure you are using ActiveSynch 4 or higher. This is now available from Microsoft's site. :idea:
Hey guys, I'm new to XDA, I read the rules and everything but I couldn't fix my problem... I rooted my phone with superoneclick thingy... I had the superuser program.. any way, I was bumped when I found out that SE won't bring 2.2 on X10i so I wanted a new 2.2 ROM so I searched and found a thread I can't remember which one but it downloads a file named XAR.rar. It had 4 steps, on step one I don't know what happened but "THE USB DEBUGGING IS OFF AND THE SYSTEM IS BRICKED".
I start the phone, SE appears followed by a logo "docomo NTT" then the screen is pitch black... for several hours... Can't use flash tool, can't use SEUS... etc.
Please, is there a fix!!?
Can you try the suggestions from the following thread & see if it helps:
http://forum.xda-developers.com/showthread.php?t=1156837
Also quoting the actual suggestion made in that post by andrewddickey:
andrewddickey said:
Sounds like what happend to me when flashing custom kernels to MIUI ROMs.
Something wrong with the chargemon with the problem I was having.
But for you. Dunno.
You've tried re-flashing firmware but cannot get flashtool to recognize your phone?
Try taking the battery out, then get flashtool set up, plug everything in and hold the back button, and then put the battery back in and continue to hold the back button.
Sometimes, it takes a bit for the 'puter to recognize the phone with flashtool because it's had the USB ID re-assigned. Mine (on windows 7) will re-install the USB driver when I'm having severe issues.
Click to expand...
Click to collapse
Thanks for replying,
I tried flashtool and it did recognize it... it started but aborted due to "USB DEBUGGING" being unactivated. And now my phone battery is dead "I think" coz after a day and a half staying awake searching and trying stuff, I forgot it open on the dead screen and fell asleep. I woke up with a new problem... red light appeared. I searched for that and it appears to be "since I didn't do anything" the battery is dead. I put it on charger for like 9 hours and I came back and the light's still there. I don't know if the phone IS charging or not. I don't have another way to re-charge the battery except the charger and USB cable.
I have drivers, I have firmwares, I have flashtools... I just need it to work so I can install ANY android version.
japinder said:
Can you try the suggestions from the following thread & see if it helps:
http://forum.xda-developers.com/showthread.php?t=1156837
Also quoting the actual suggestion made in that post by andrewddickey:
Click to expand...
Click to collapse
Thanks Dude, I did it. Phone was dead... charger didn't work... I used usb cable again and it got charged and worked. I flashed it and it's ok. Now it's on charger. Thaaaaaaaaaaaaaaaaaaaaaaaanks
You're welcome.
Nice to be of service.
First of all guys. i'm sorry if a posted this on the wrong place, im new to this Forum and as fasta as i could i will explore it to learn more things.
Ok, my problem is that i have a Xperia X10i and what happens is that it is with battery LOW ! I have de wall charger and the USB Cable, they're both original, and because of LOW Battery is always flashing red as well, after a long time the LED turns green (FlashMode) but is Useless, PC Companion does not install the firmware freezes and then tells me tha sony motor etc failed, Update Service Fails too, says to check if the battery is charged what obviusly isn't, tried flashtool but it always get stuch on some part, maybe its the .ftf tha is corrupted, i don't what place should i downloade FTF's, i downloaded those from sites tha i found on Google, could you guys give me one hand and help me ? I'm starting to get frustrated with this phone, i'll aprecciate your help
PS: Sorry for my English im Portuguese
david1998 said:
First of all guys. i'm sorry if a posted this on the wrong place, im new to this Forum and as fasta as i could i will explore it to learn more things.
Ok, my problem is that i have a Xperia X10i and what happens is that it is with battery LOW ! I have de wall charger and the USB Cable, they're both original, and because of LOW Battery is always flashing red as well, after a long time the LED turns green (FlashMode) but is Useless, PC Companion does not install the firmware freezes and then tells me tha sony motor etc failed, Update Service Fails too, says to check if the battery is charged what obviusly isn't, tried flashtool but it always get stuch on some part, maybe its the .ftf tha is corrupted, i don't what place should i downloade FTF's, i downloaded those from sites tha i found on Google, could you guys give me one hand and help me ? I'm starting to get frustrated with this phone, i'll aprecciate your help
PS: Sorry for my English im Portuguese
Click to expand...
Click to collapse
You could try using a different charger. I had issues with my stock charger once with an older phone of mine and i thought it was my phone. So try that maybe?
Droid Premium said:
You could try using a different charger. I had issues with my stock charger once with an older phone of mine and i thought it was my phone. So try that maybe?
Click to expand...
Click to collapse
Greetings, thanks for the reply, i have already tried a different USB Cable, more than 3 Shall i say, the USB Port isn't because it went to repair a couple of days ago and it wasn't broken, i have flashtool installed but i don't what steps to follow, can you give some help please ? sorry for the inconvenience Once again, sorry for my english
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Joshua Mr PC Repair said:
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Click to expand...
Click to collapse
You can try connecting to your PC via Odin and try the unbrick method by some guy named qbking on youtube. Link below
https://www.youtube.com/watch?v=m8tg9AlfOQ8&feature=youtube_gdata_player
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Joshua Mr PC Repair said:
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Click to expand...
Click to collapse
quick tip, always have a good charge when flashing 70% or better. flashing for me can sometimes use a lot of juice, especially when you are low.
were you trying to charge battery through USB or wall? try wall or maybe different USB port.
if you get power, can you get download mode? hold volume down & power and plugin USB
if you have download mode, your good.
ROM was for your phone and carrier right? just had to ask, you wouldn't be first
captemo said:
quick tip, always have a good charge when flashing 70% or better. flashing for me can sometimes use a lot of juice, especially when you are low.
were you trying to charge battery through USB or wall? try wall or maybe different USB port.
if you get power, can you get download mode? hold volume down & power and plugin USB
if you have download mode, your good.
ROM was for your phone and carrier right? just had to ask, you wouldn't be first
Click to expand...
Click to collapse
it was for carrier rom i wanted to return it to stock , and yeah i hooked it to the wall still didnt get any power , but im gonna check out that QBking77's Video , Ill Let you guys know , Thanks
:fingers-crossed:
Don't use usb power. Use the wall charger and the factory charging cable. Give it four hours, then try again. You're not bricked.
rangercaptain said:
Don't use usb power. Use the wall charger and the factory charging cable. Give it four hours, then try again. You're not bricked.
Click to expand...
Click to collapse
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Good For You!
Joshua Mr PC Repair said:
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Click to expand...
Click to collapse
Glad you're not bricked! I was bricked a few months ago, yes the real hard brick paper weight dead no response brick, not what these other post about having bricked their phone. I downloaded and installed a Liquid smooth jelly rom, but the post linked to a s3 build.
As soon as my phone didnt turn I feared the worst. Confirmed and yes it was gone. I had to send it off to get J-tagged. It worked!
Cost me a pretty penny. Then the thread mod was like oops! I linked the wrong rom hope nobody installed and got brick, just fixed it.
Ain't that some ****!
Joshua Mr PC Repair said:
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Click to expand...
Click to collapse
Read up my friend. It is all in the general section Super Everything, The All in one stock thread, and finally here. You are not unrooting insomuch as just flashing stock. Once you flash stock, that overwrites/deletes twrp/cwm and supersu.
Yes, as ^^^^ mentioned, you don't have to be concerned about unrooting.
There are debloated and bloated versions of stock Canadian roms in the development section. Another source for stock/carrier roms is www.samfirmware.com but you have to flash those with a pc using Odin software.
hey guys new to this place, not that new, i've always search this forum for some rom or how to fix stuff and other help but never post anything here.
so lets get straight to the point. so basically i want to revive my old samsung galaxy tab 10.1. you know, for fun and nostalgia haha (if possible). so i don't really remember what i did to this tablet that it becomes like what it is today. cannot be turned on, no display when charging, no nothing. i do remember rooting it before. when it charge, there is a little warm going on on the tablet but nothing happen. when i connect it to my pc, it recognize it as unknown device the first time, and then i hold the power button for couple of second and my pc recognize it again but now as apx but no driver available. so i made a little research just now and i found that the tablet may have a chance to be fix with the use of nvflash or something. so all im saying is it really my tab can be fix without spending money? if can how do i do it? i have a little experience about flashing rom and recovery. but nothing on how to use nvflash. i do really appreciate your help to bring me back this tab that meant so much for me and my family back in the days.
http://www.gsmforum.ru/threads/223383-Samsung-GT-P7500-%D0%BE%D0%BF%D1%80%D0%B5%D0%B4%D0%B5%D0%BB%D1%8F%D0%B5%D1%82%D1%81%D1%8F-%D0%BA%D0%B0%D0%BA-APX
you download this files...let me know if you fix your tab
so its seems that i need to register for to download 3 files right? now im waiting for the email confirmation which take too long
yes, i can't upload this files...there's a error! did you downloaded 3 files and runned the process? the user doesn't write after the process but i think problem fixed. Ask you with topic when you registe youself...
jackfiq said:
so its seems that i need to register for to download 3 files right? now im waiting for the email confirmation which take too long
Click to expand...
Click to collapse
i can upload only 1 file of 3 files.... 2 files're > of 20MB...let me know if you fix your tab
bollicine said:
i can upload only 1 file of 3 files.... 2 files're > of 20MB...let me know if you fix your tab
Click to expand...
Click to collapse
can you guide me on how to do it? from start till end. thank you soo much for helping me out
jackfiq said:
can you guide me on how to do it? from start till end. thank you soo much for helping me out
Click to expand...
Click to collapse
1) to install apx driver (NVIDIA driver )
2) to run file .batch
i think this! you check now and write the result!
https://forum.xda-developers.com/showthread.php?t=1130574]
bollicine said:
1) to install apx driver (NVIDIA driver )
2) to run file .batch
i think this! you check now and write the result!
Click to expand...
Click to collapse
hey i got a problem, my pc doesnt detect my device as apx something, instead it detects as unknown usb device (invalid device descriptor) . (i've also reset my pc months ago ).
jackfiq said:
hey i got a problem, my pc doesnt detect my device as apx something, instead it detects as unknown usb device (invalid device descriptor) . (i've also reset my pc months ago ).
Click to expand...
Click to collapse
you install the driver for to use nvflash...read this guide to install the driver https://forum.xda-developers.com/showthread.php?t=1130574]
but to use file.batch 1th recovery_P75xx.bat of Recovery_P75xx_110710_RemoveUsbDriver.zip to run the nvflash and the recovery and you post the result. bye
I think your battery is complet down, that means the current is under the charging level.
bierma32 said:
I think your battery is complet down, that means the current is under the charging level.
Click to expand...
Click to collapse
Ooo okok ill try to charge it first then but right now im study away from my home so its gonna take a while but thank you soo much for helping me put
jackfiq said:
Ooo okok ill try to charge it first then but right now im study away from my home so its gonna take a while but thank you soo much for helping me put
Click to expand...
Click to collapse
Ok! you connect it with power supply for a night.... i hope you can to recharge it if you don't see the battery icon...otherwise you try with a usb cable cut directly on battery's connector and recharge it...you've to remove back cover. Update us, bye!
bollicine said:
Ok! you connect it with power supply for a night.... i hope you can to recharge it if you don't see the battery icon...otherwise you try with a usb cable cut directly on battery's connector and recharge it...you've to remove back cover. Update us, bye!
Click to expand...
Click to collapse
hello again. sorry for didnt post any update . im actually really busy with studies and i already told that my university is far from my home. so i didnt get a chance to get back here until a month. now im here exicted to the thing only then come out with this type of output
Recovery the bootloader...
Nvflash started
rcm version 0X4
Command send failed (usb write failed)
so i've made a little research.. so it seems that my device's bootloader is locked. so is there anyway to unlock my bootloader??
by the way im really sorry i didnt update for a long time. but i hope you still want to keep in touch with me to solve my problem. much thanks!