is my Digitizer broken? :( - Touch HD Accessories

Hey guys!
something happaned to me 2 days ago.
everything worked great, and suddenly the HD screen wont work properly.
the left side of the screen sometimes reacts defferent when i press the left side screen.
for example - i press the Start on the left, and it reacts on the right!, if i press the right side it works good!
ive done few HR with changing the ROM few times too, the problem is still there...
when i do screen align - the buttons are getting pressed ok, when i start to use the phone its getting crazy, i have to press the left side at the end of the screen so it can react on the middle...
im getting crazy cuz everything worked great 2 days ago...
the picture on the screen is perfect - no defects except the touch.
also when i press the left side of the screen' lets say on the TF3D Tabs and living the Stylus on one Tab, its shaking a bit like im playing with it...
all the 4 HARD BUTTONS at the buttom doesnt work properly either...
thank you all...
BTW something happaned to alot of people? i can see alot of messages about those things..
* also one more thing..
im using my phone as a Modem for 4 months already, can it be one of the resons to make the Digitizer go crazy? the heat? cuz its get hot as modem...

Hey.
thanks for the answer.
but my qustion is if it really is my Digitizer...?

yes i got the same problem, send it to my reseller and got it repaired.
In a few hours i go to the poststation and get my HD back
greetz

yeah my seller lives at the other side of the country lol...
thanks guys for the help.
=]

OK
something doesnt make any sense!
ive done another HR- another ALIGN SCREEN' and suddnley the screen works perfect! no stuttering, no jumping from one tub to another!
how can that be???
ive pressed the screen hard enough to see if the problem comes back! and it didnt...
how can that make any sense?
Damaged Digitizer will do that?

Hey!
thanks for the answer, but i live far away...in Israel \=
the main problem i have on the screen, is the OILY LIQUID under the screen! that what causes the problems, now my HD wont work at all, or maybe sometimes when it wants to...
now i have to send it for repair...and hope it will be ok

I'm out of luck,
One year ago, in the beginning of August, I had the Digitizer problem...
After a year passed, I begun to noticed again a small oil liquid on the LCD!!!
I still don't notice any problem with the touch, but it's a matter of time...
I can't believe it!!! 99% for sure that I have to send my phone to repair again and almost exactly one year after the same problem!!!

Related

Erratic touch screen? Please help!

I have a T-Mobile Pocket Phone Edition,
It's had a rough life but as kept going for over 3 years now.
For the last year I would have to realign the screen 2 or 3
times a week but over the last few months it keeps getting worse.
Sometimes the screen won't respond to anything anywhere,
then after I tap it a few times boom works fine.
Sometimes I'll tap on the “Ok” and the “Start menu” will activate.
Sometimes drawing a line up the center of the screen will end up
shooting all over the screen.
And sometime it will work perfectly!
I thought the problems were to erratic to be hardware so
I hard set after awhile it started again,
So I hard set and installed a different ROM after a coupe hours
the problem was back.
Also sometimes the align program will get stuck in a
loop that doesn't end.
I've searched but can't find an answer? Anyone have an idea?
I've already taken it a part once but couldn't see how to get
any further after I toke the back panel off? Please help!
WOW nobody? So no one was heard of this problem before?
Can anyone direct me to directions on taking apart the Wallaby?
Thanks <><
It's a problem with touch screen. You should check (and fix) it.
Maybe it is necessary to press well screen to the motherboard. (Sorry my english).
Ok, Can you tell me where that connection is?
Thanks
Toke everything apart, found the connection, cleaned everything (w/ screen wipe)
put it all back together. Still have the touch problem and now the backlight won't work!
I've found if I press the unit in my hand the touch panel works right,
I don't think it's a lose connection to the main board so I think it must be
one on the main board.
If anybody thinks they want it for parts let me know! :?

[Q] Menu button flashing issue

Hi to everyone in this forum. I've recently received as a present a new toshiba folio 100, but, since I'm experiencing an annoying menu button flashing, I've thought of it as a software problem so I upgraded the folio using the foliomod1.3c and applied the rotate patch and also the 1.3c fix patch. The menu still flash with no apparent logic. I've tried to kill all applications running and it's still there. It seem to come up and down at random. I ask to all in this forum: do you believe it's a hardware issue or is a software issue? Because if it's a hardware issue I'm going to try to have a new folio from toshiba. I'm overall very pleased with the work that Dexter made to make the folio an usable machine but this flashing is driving me crazy. I use the folio basically as a portable scientific pdf reader so I need to concentrate on what I read and this flashing is really annoying. I would like very much to thank you all in this forum in advance for all the suggestion/help you could provide.
use my "foliobuttons" app
teknoraver said:
use my "foliobuttons" app
Click to expand...
Click to collapse
I have a request that serve All those who suffer MENU crazy button .
Is it possible to prepare application you can setting ON/OFF the MENU button
Most of the time useless button.
sometimes button jump after 10 minutes, sometimes after an hour
Usually I fix the problem by changing the settings with FolioButtons 1.1.
If you could add to FolioButtons on/off operation for menu Buttons was the best.
Hi teknoraver,
Can you add enabled/disabled menu button in foliobuttons application ?
flashing on...
teknoraver said:
use my "foliobuttons" app
Click to expand...
Click to collapse
I am pretty desperate about this issue, because none of the methods seem to help...
Right now the buttons work opposite- Menu button flashes mad and none of the other 3 responds...dont know how it happened
Just a thought- while the folio is booting up the menu button ALREADY flashes! I have zero understanding in there but isn't it a process that loads / starts early in the line?
I appreciate everyone's effort trying to solve this bug as it makes this handy tool a useless pile of crap.
I was wondering how many folio users are suffering of this crazy buttons madness.
Mine was crazy from the very beginning; I sent it back for repair and toshiba only did a firmware restore... Nothing changed at all!
It makes my folio almost unusable!
bye bye crazy buttons
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
I think it's a hardware issue and even a build quality issue.
If i hold my folio at the side of the buttons, i get the flashing buttons problem (even the foliobuttons app will not help), if i hold it at the other side, i've got no problems at all.
Do you have an animated background? Because I saw that some people had this issue with an animated background...
Hi Mshr73, nice first post indeed
Could you post some pictures of what you did?
Mshr73 said:
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
Click to expand...
Click to collapse
seems to get better...
I really don’t want to be too quick on this, but Dexter’s 1.4 seems to bring relief to this issue - for 2 days I have been running this mod the menu button stopped flashing!!
Any similar impressions on this?
vietnamibalzsam said:
I really don’t want to be too quick on this, but Dexter’s 1.4 seems to bring relief to this issue - for 2 days I have been running this mod the menu button stopped flashing!!
Any similar impressions on this?
Click to expand...
Click to collapse
No way pal, I guess I'm in the opposite situation. It still happens to me, and sometimes I think it even got worse... well, I can always look at crazy keys as a "special feature" that no other tablet will have!!!
I just tested without thickness under the screen, with foliomod 1.4 and after a few hours I again the problem of crazy buttons.
Mshr73 said:
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
Click to expand...
Click to collapse
Well, I just finished dismantling e reassembling my Folio. Following your hint, I cut a piece of paper and put it between the audio connector and the back of the screen (yes, it was metal vs metal). I'll see whether it's gonna work or not. Crossing fingers for now.
Not that I'm so confident in leaving a piece of paper stuck right where the DC input is .
BTW, did you try with a smaller thickness? Even if this is the problem, I'm wondering whether a piece of paper would be enough or not.
thyself can someone. post pictures of before and after details?
we will be much appreciated
i didn't have the crazy buttons issue this far in 2 weeks, just my home butten needs to be pressed harder. I'm pretty sure it's hardware related, i read often that users experience it when changing from an warm room to a colder one, or in regions where its verry humid(some circuit closes maybe...). so Mshr73 is on the right way as far as i can tell.
Dexter's 1.4
^Sbk79^ said:
No way pal, I guess I'm in the opposite situation. It still happens to me, and sometimes I think it even got worse... well, I can always look at crazy keys as a "special feature" that no other tablet will have!!!
Click to expand...
Click to collapse
Really sorry mate, I hope it will solved this for others too...
Anyhow, it is so disturbing, that I was already considering to send the tablet back to Toshiba...
I'll try to do this weekend if I do not have too many customers. I post the result Monday.
Mshr73 said:
I'll try to do this weekend if I do not have too many customers. I post the result Monday.
Click to expand...
Click to collapse
I'm looking forward to your pictures, too... because my trial simply didn't work.
I tried with both a single piece of paper and then with 2 pieces wrapped in tape. I put these spacers between the back of the display and DC/audio connector.
In both cases, the crazy keys phenomenon started to happen after 15-20 minutes of usage.
In most cases, it starts to show when I unlock the device. As soon as I unlock it, home and menu buttons light up with no apparent reason and go crazy for 10-30 seconds.
Then, I even tried to loosen just a little the screws (I read, somewhere in the forum, of a guy who said that he solved his crazy keys and screen lag problems this way). I mean, all screws are now locked but not too tight. Well, I have to say that I don't have any screen lag anymore (I even removed the piece of paper, from the battery area, which used to solve the issue before) but crazy keys still happen. I'm going slightly mad
^Sbk79^ said:
I'm looking forward to your pictures, too... because my trial simply didn't work.
I tried with both a single piece of paper and then with 2 pieces wrapped in tape. I put these spacers between the back of the display and DC/audio connector.
In both cases, the crazy keys phenomenon started to happen after 15-20 minutes of usage.
In most cases, it starts to show when I unlock the device. As soon as I unlock it, home and menu buttons light up with no apparent reason and go crazy for 10-30 seconds.
Then, I even tried to loosen just a little the screws (I read, somewhere in the forum, of a guy who said that he solved his crazy keys and screen lag problems this way). I mean, all screws are now locked but not too tight. Well, I have to say that I don't have any screen lag anymore (I even removed the piece of paper, from the battery area, which used to solve the issue before) but crazy keys still happen. I'm going slightly mad
Click to expand...
Click to collapse
Well ... with a piece of paper the problem Come back.
I handed a piece of cardboard and the problem disappears.
I think that to raise the screen to solve them but I'm still not 100% sure.

Screen problems...

Hi all!
My friend loved my mozart, so decided to get himself one!
BUT, annoyingly, there seems to be a problem with the screen...
Sometimes it just wont detect that you are touching it etc.
Sometimes it will work for a little while, or even just a split second and think your pressing instead of sliding your finger.
i HAVE already replaced the screen thinking this would solve it, but its EXACTLY the same
Is there anything else i could try, or is it just a screwed unit?
Cheers
Keith
BUMPZ!!!
anyone???
you got a screen protector on it? before i got my screen protector on it, it worked good. but after then it sometimes didnt respond to touches. sometimes especially when it was hot
ive answered this 2 times alread, try to search
flash the previous firmware back and itll work, its worked for mine

Xperia Mini Pro Capacitive Button Problem

Hi I was wondering if anyone has the same problem as i am having right know.
I have a Sony Ericsson Xperia Mini pro White SK17I. It was working well untill when i tried to press the back button. I had to wait for so long to get a response from the back button. I tried the same thing with the menu button (Not the physical hone key) it still had the delay. The delay is about 5-10 seconds. Sometimes, you have to wait extremely long or you have to press it again. sometimes it runs normally. But rarely it does work as normally should. I only had the phone for 2 weeks. I was wondering if i can exchange it since i have a 12 Month warranty. thats all the problem I'm having right now
thank you
Me too but not always i discovered that it depends on memory usage.
Sent from my SK17i using XDA App
me too..need to press harder..but not usually like that..most of the time, it works normally.
same here..just to make a point, did you have the noise problem as well?
I have the same problem. I think has to do something with the temperature/humity. If its warm outside and i have sweat on my fingers its happens, when its cold and dry everything works fine. I tested with /dev/event/input and with wet fingers it does not even trigger any events.
Sent from my SK17i using XDA App
I got same problem with my Xperia Mini Pro back key. Every time it happened, I'll just reboot the phone and that problem is gone.
budzer said:
I got same problem with my Xperia Mini Pro back key. Every time it happened, I'll just reboot the phone and that problem is gone.
Click to expand...
Click to collapse
I got this problem right after installing NFS Shift. Now the back key often doesn't work and the Options key is unresponsive.
It is a known issue related with temperature, affecting more and more people every day (including me). SE is not responding, but seems a design problem:
talk.sonyericsson.com/message/112257
You'll be surprised, but I do not have such problems
budzer said:
I got same problem with my Xperia Mini Pro back key. Every time it happened, I'll just reboot the phone and that problem is gone.
Click to expand...
Click to collapse
I rebooted, but the problem is still there.
my back key is okay, only menu key is unresponsive at all. i think this is because of hardware problem.
i bought it 1 day ago, though. gonna bring my phone to SE service center tomorrow.
Guys I fixed my problem. This guy on facebook had the same problem as I did. He fixed his and so did I. The reason it lags isnt because of the memory usage. Its some other reasons that I dont remember. Anyway, if you guys still need to fix yours, heres how. First you got to have cottons and a screen protector. The Sony one that you get from the box works. You have to apple one TINY drop of soap onto the cotton then wipe it over your display. Make sure you clean the buttons cause thats the priority. Make sure you cover the top bits. After you done that. Get your clean cotton and wipe it to get the soap out. DONT USE WATER. After thats done, make sure there is no string of cotton left in your screen. After you checked, apply the screen protector then its done. I just did mine today and its going well so far. Trust me guys this isnt a trap to break your phone or anything. I trusted this guy that told me the steps and it worked. What I am trying to say is just give it a go. If you did it like I did, I think you should be fine. I love my xperia again hope it works for you guys
Sent from my SK17i using XDA App
I have no back button issues so far. I once had it slowing down but that was related to an application hanging so low memory might be related.
No problems here so far, but it seems like german phones don't have problems at all. Ive been checking amazon ratings all day long but no1 ever mentions problems with the button
Well some people have the problem. I just wanna help them.
Sent from my SK17i using XDA App
benjiman1135 said:
Well some people have the problem. I just wanna help them.
Sent from my SK17i using XDA App
Click to expand...
Click to collapse
Yea thats nice My guess is, some countries get worse quality phones :/
As far i have the phone the back and menu keys work very fine for me, in fact they are very sensitive... and works fast
I had no problems until the update to Android 2.3.4.
Now I can't even play a game for 10 minutes and it presses the back button a lot.
It looks like it can be related to the firmware.
-----------------
I've seen on another site that other people also are facing more heating after update to 2.3.4. Well, since overheating is related to the issue, it may be possible that it is causing the back button issue for me.
Its Due to Memory Blocks aswell
The Problem is mainly due to too much of moisture in your hands...
to get rid of the problem, wipe off your hand of all moisture, and clean your cellphone screen and the buttons with a soft cloth.
And also remember to clean the used memory. usually its both the problems occurring at the same time, due tio which it seems no to be working..
hope it helps
I've had this problem too and I found out that the cause is the sweat from my hands.
FreeZr said:
No problems here so far, but it seems like german phones don't have problems at all. Ive been checking amazon ratings all day long but no1 ever mentions problems with the button
Click to expand...
Click to collapse
I beg to differ, but my German Mini Pro does have the back-button-issue!
Don't know if it's due to sweaty fingers, I'll try one of these capacitive pens some day.
But I can say, as soon as I plug in the power cord, the button is working again.

help with screen

hey guys just a quick problem.
I have installed the miui rom like 2 weeks ago but in the last few days the screens been playing up as now i can't press the e,s,z and voice input, its like their is a voide that i can't touch or do anything with. I have not dropped the phone or anything like that. Could the screen be playing up, or could it be the miui rom? and if it is how do i fix it?
I think you should try your screen with a multitouch test app
multi-touch
ok i did a multi touch test which kinda helped i guess... I have found out their is like a 0.5cm void on the screen which i cant press? any help...
try watching one of the replace digitizer atrix videos on you tube and determine if your confident enough to try it, but basically your digitizer stopped working, it happened to me 3 times over one year, ATT warranty replaced the phone but it was still pretty annoying.
reply
Is it truly the digitizer, it has no cracks or scratches, as ive had a screen protector on the screen since i have got it :-D, I dont really wanna replace something that isn't necessary. And by the videos it looks a bit beyond me (even though i do electronics in school), but even so i dont really mind the empty void in the screen, the only annoying thing is that the i can't press e,s,w in the keyboard and i use at lest one for my google account password
aroma Breaks Digitizer?
Hmmmm ESZ Those are the exact same keys that are messed up on mine.. MIUI you say eh.. let me guess, that one with the aroma installer? BAM..

Categories

Resources