Hi I was wondering if anyone has the same problem as i am having right know.
I have a Sony Ericsson Xperia Mini pro White SK17I. It was working well untill when i tried to press the back button. I had to wait for so long to get a response from the back button. I tried the same thing with the menu button (Not the physical hone key) it still had the delay. The delay is about 5-10 seconds. Sometimes, you have to wait extremely long or you have to press it again. sometimes it runs normally. But rarely it does work as normally should. I only had the phone for 2 weeks. I was wondering if i can exchange it since i have a 12 Month warranty. thats all the problem I'm having right now
thank you
Me too but not always i discovered that it depends on memory usage.
Sent from my SK17i using XDA App
me too..need to press harder..but not usually like that..most of the time, it works normally.
same here..just to make a point, did you have the noise problem as well?
I have the same problem. I think has to do something with the temperature/humity. If its warm outside and i have sweat on my fingers its happens, when its cold and dry everything works fine. I tested with /dev/event/input and with wet fingers it does not even trigger any events.
Sent from my SK17i using XDA App
I got same problem with my Xperia Mini Pro back key. Every time it happened, I'll just reboot the phone and that problem is gone.
budzer said:
I got same problem with my Xperia Mini Pro back key. Every time it happened, I'll just reboot the phone and that problem is gone.
Click to expand...
Click to collapse
I got this problem right after installing NFS Shift. Now the back key often doesn't work and the Options key is unresponsive.
It is a known issue related with temperature, affecting more and more people every day (including me). SE is not responding, but seems a design problem:
talk.sonyericsson.com/message/112257
You'll be surprised, but I do not have such problems
budzer said:
I got same problem with my Xperia Mini Pro back key. Every time it happened, I'll just reboot the phone and that problem is gone.
Click to expand...
Click to collapse
I rebooted, but the problem is still there.
my back key is okay, only menu key is unresponsive at all. i think this is because of hardware problem.
i bought it 1 day ago, though. gonna bring my phone to SE service center tomorrow.
Guys I fixed my problem. This guy on facebook had the same problem as I did. He fixed his and so did I. The reason it lags isnt because of the memory usage. Its some other reasons that I dont remember. Anyway, if you guys still need to fix yours, heres how. First you got to have cottons and a screen protector. The Sony one that you get from the box works. You have to apple one TINY drop of soap onto the cotton then wipe it over your display. Make sure you clean the buttons cause thats the priority. Make sure you cover the top bits. After you done that. Get your clean cotton and wipe it to get the soap out. DONT USE WATER. After thats done, make sure there is no string of cotton left in your screen. After you checked, apply the screen protector then its done. I just did mine today and its going well so far. Trust me guys this isnt a trap to break your phone or anything. I trusted this guy that told me the steps and it worked. What I am trying to say is just give it a go. If you did it like I did, I think you should be fine. I love my xperia again hope it works for you guys
Sent from my SK17i using XDA App
I have no back button issues so far. I once had it slowing down but that was related to an application hanging so low memory might be related.
No problems here so far, but it seems like german phones don't have problems at all. Ive been checking amazon ratings all day long but no1 ever mentions problems with the button
Well some people have the problem. I just wanna help them.
Sent from my SK17i using XDA App
benjiman1135 said:
Well some people have the problem. I just wanna help them.
Sent from my SK17i using XDA App
Click to expand...
Click to collapse
Yea thats nice My guess is, some countries get worse quality phones :/
As far i have the phone the back and menu keys work very fine for me, in fact they are very sensitive... and works fast
I had no problems until the update to Android 2.3.4.
Now I can't even play a game for 10 minutes and it presses the back button a lot.
It looks like it can be related to the firmware.
-----------------
I've seen on another site that other people also are facing more heating after update to 2.3.4. Well, since overheating is related to the issue, it may be possible that it is causing the back button issue for me.
Its Due to Memory Blocks aswell
The Problem is mainly due to too much of moisture in your hands...
to get rid of the problem, wipe off your hand of all moisture, and clean your cellphone screen and the buttons with a soft cloth.
And also remember to clean the used memory. usually its both the problems occurring at the same time, due tio which it seems no to be working..
hope it helps
I've had this problem too and I found out that the cause is the sweat from my hands.
FreeZr said:
No problems here so far, but it seems like german phones don't have problems at all. Ive been checking amazon ratings all day long but no1 ever mentions problems with the button
Click to expand...
Click to collapse
I beg to differ, but my German Mini Pro does have the back-button-issue!
Don't know if it's due to sweaty fingers, I'll try one of these capacitive pens some day.
But I can say, as soon as I plug in the power cord, the button is working again.
Related
ever notice when your hands become moist...and when u r pressing an alphabet on the soft keyboard.after u release your fingers..the button will remain pressed or some totally different button will be pressed.
also once u press the keyboard, it will start pressing screen alphabets on its own?...as if some ghost has taken over control.
also..when hands are moist....and u try to unlock the screen or take the call...the slider wont respond to your fingers movement..and i have missed so many calls due to this.
just simple function was tapping on an app becomes so difficult as it ll open up some other app..
i am thinking it could be due to the default screen protector film provided from factory.
anyone with any other android phone face such a problem?
iphone 4 doesnt have this problem
Nocturnal310 said:
i am thinking it could be due to the default screen protector film provided from factory.
anyone with any other android phone face such a problem?
iphone 4 doesnt have this problem
Click to expand...
Click to collapse
It happens with and without the screen protector. I'm not sure if I have ever experienced this on an Iphone, or as prevelent as on the x10.
Any screen that relies on conductive tech will do this
yetep said:
Any screen that relies on conductive tech will do this
Click to expand...
Click to collapse
havent noticed it on other phones.
including X1i ..the first xperia running crappy windows mobile.
i mean touchscreen does give problem with fingers are wet.
but here when fingers are even slightly moist..it starts acting unusable.
i am thinkin of changing the factory fitted protective film
Yea it does get really annoying... and then when it's cold, the warmth from your finger produces condensation on the screen, so I have to sometimes wipe the screen and my fingers dry before the phone's usable.
I agree, it is really hard especially when you press the delete key on your keyboard and erase everything!
I hope that this problem gets solved when multi touch get released, because the screen reception is handled different than now
That's why I keep a towel attached to the hook on the bottom of the phone.
harrypalmero said:
That's why I keep a towel attached to the hook on the bottom of the phone.
Click to expand...
Click to collapse
hahahah too much wack n jack lol!
Nocturnal310 said:
havent noticed it on other phones.
including X1i ..the first xperia running crappy windows mobile.
Click to expand...
Click to collapse
Ok, the X1 was resistive, and under no circumstances whatsoever will wet fingers effect a resistive touch screen like this... Obviously if you use a resistive touch screen under water, you will have some problems.
Apple have been doing capacitive touch screens for a lot longer than sony, so they've probably got their act together on that... Mind you, this is of course one of the drawbacks of the capacitive screen - it will never be as accurate as the resistive versions...
I don't know too much about capacitive screens, but I know you could adjust the sensitivity on a resistive screen... perhaps there's an app somewhere... maybe
Nocturnal310 said:
ever notice when your hands become moist...and when u r pressing an alphabet on the soft keyboard.after u release your fingers..the button will remain pressed or some totally different button will be pressed.
also once u press the keyboard, it will start pressing screen alphabets on its own?...as if some ghost has taken over control.
also..when hands are moist....and u try to unlock the screen or take the call...the slider wont respond to your fingers movement..and i have missed so many calls due to this.
just simple function was tapping on an app becomes so difficult as it ll open up some other app..
i am thinking it could be due to the default screen protector film provided from factory.
anyone with any other android phone face such a problem?
iphone 4 doesnt have this problem
Click to expand...
Click to collapse
No use in removing the factory screen protector. Tried that before to see whether it improves the responsiveness, but it did either.
iPhone 4 also does have this problem and hence it's not related to phones, but it's their behavior under the given circumstances.
This is really annoying, missed so many calls and given up on typing so many sms's after starting over 3 times...
It's a pain when it's raining, and leads me to wonder if the new Motorola Defy can really function as advertised.
Still better than resistive, for me at least. My omnia screen is well knackered I guess because I pressed it too hard over too many months.
sent from my rooted 2.1 X10i (+JIT) using XDA App
The most annoying thing is that I can't answer a call because the slider goes half way to the right and then it returns back to the left! Crappy screen! My finger are always wet, I didn't have such problems with other phones, especially the iPhone was awesome..
guys this happen with me only while my x10 is charging...but still confusing i'm totally disappointed from SE because of many things the battery performance and so many things....
I wonder if there's a way to make the menu and back buttons act as red and green buttons on traditional phones?
sent from my rooted 2.1 X10i (+JIT) using XDA App
This issue is seriously making me consider getting rid of my x10
Sent from my X10i using Tapatalk
curious_yellow_eyes said:
I wonder if there's a way to make the menu and back buttons act as red and green buttons on traditional phones?
sent from my rooted 2.1 X10i (+JIT) using XDA App
Click to expand...
Click to collapse
was wondering the same....i ve always hated sliding to take a call anyway..be it any touchscreen phone.
bazza_1988 said:
This issue is seriously making me consider getting rid of my x10
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
i heard the problem is on iphone 4 also..so dont hate x10
solution
doesnt anyone hav a solution for this??!
it has seriously been a very big problem for me n im sure for many of the x10 users..
atleast isnt there a way to set a button or a key to answer calls??!
pasangamage said:
doesnt anyone hav a solution for this??!
it has seriously been a very big problem for me n im sure for many of the x10 users..
atleast isnt there a way to set a button or a key to answer calls??!
Click to expand...
Click to collapse
the problem is due to it being buggy dual touch only... if we get true multi touch like brazil said it will help this issue
hope so
i hope we do.. cuz its been soo annoyin.. whts the point in havin a phone if u cant answer phone calls or type a simple text..
mmm things rnt lookin tht way though after seeing the preview video on youtube of the x10 wit the official GB update.. but.. lets wait n c n hope for the best
Hi to everyone in this forum. I've recently received as a present a new toshiba folio 100, but, since I'm experiencing an annoying menu button flashing, I've thought of it as a software problem so I upgraded the folio using the foliomod1.3c and applied the rotate patch and also the 1.3c fix patch. The menu still flash with no apparent logic. I've tried to kill all applications running and it's still there. It seem to come up and down at random. I ask to all in this forum: do you believe it's a hardware issue or is a software issue? Because if it's a hardware issue I'm going to try to have a new folio from toshiba. I'm overall very pleased with the work that Dexter made to make the folio an usable machine but this flashing is driving me crazy. I use the folio basically as a portable scientific pdf reader so I need to concentrate on what I read and this flashing is really annoying. I would like very much to thank you all in this forum in advance for all the suggestion/help you could provide.
use my "foliobuttons" app
teknoraver said:
use my "foliobuttons" app
Click to expand...
Click to collapse
I have a request that serve All those who suffer MENU crazy button .
Is it possible to prepare application you can setting ON/OFF the MENU button
Most of the time useless button.
sometimes button jump after 10 minutes, sometimes after an hour
Usually I fix the problem by changing the settings with FolioButtons 1.1.
If you could add to FolioButtons on/off operation for menu Buttons was the best.
Hi teknoraver,
Can you add enabled/disabled menu button in foliobuttons application ?
flashing on...
teknoraver said:
use my "foliobuttons" app
Click to expand...
Click to collapse
I am pretty desperate about this issue, because none of the methods seem to help...
Right now the buttons work opposite- Menu button flashes mad and none of the other 3 responds...dont know how it happened
Just a thought- while the folio is booting up the menu button ALREADY flashes! I have zero understanding in there but isn't it a process that loads / starts early in the line?
I appreciate everyone's effort trying to solve this bug as it makes this handy tool a useless pile of crap.
I was wondering how many folio users are suffering of this crazy buttons madness.
Mine was crazy from the very beginning; I sent it back for repair and toshiba only did a firmware restore... Nothing changed at all!
It makes my folio almost unusable!
bye bye crazy buttons
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
I think it's a hardware issue and even a build quality issue.
If i hold my folio at the side of the buttons, i get the flashing buttons problem (even the foliobuttons app will not help), if i hold it at the other side, i've got no problems at all.
Do you have an animated background? Because I saw that some people had this issue with an animated background...
Hi Mshr73, nice first post indeed
Could you post some pictures of what you did?
Mshr73 said:
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
Click to expand...
Click to collapse
seems to get better...
I really don’t want to be too quick on this, but Dexter’s 1.4 seems to bring relief to this issue - for 2 days I have been running this mod the menu button stopped flashing!!
Any similar impressions on this?
vietnamibalzsam said:
I really don’t want to be too quick on this, but Dexter’s 1.4 seems to bring relief to this issue - for 2 days I have been running this mod the menu button stopped flashing!!
Any similar impressions on this?
Click to expand...
Click to collapse
No way pal, I guess I'm in the opposite situation. It still happens to me, and sometimes I think it even got worse... well, I can always look at crazy keys as a "special feature" that no other tablet will have!!!
I just tested without thickness under the screen, with foliomod 1.4 and after a few hours I again the problem of crazy buttons.
Mshr73 said:
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
Click to expand...
Click to collapse
Well, I just finished dismantling e reassembling my Folio. Following your hint, I cut a piece of paper and put it between the audio connector and the back of the screen (yes, it was metal vs metal). I'll see whether it's gonna work or not. Crossing fingers for now.
Not that I'm so confident in leaving a piece of paper stuck right where the DC input is .
BTW, did you try with a smaller thickness? Even if this is the problem, I'm wondering whether a piece of paper would be enough or not.
thyself can someone. post pictures of before and after details?
we will be much appreciated
i didn't have the crazy buttons issue this far in 2 weeks, just my home butten needs to be pressed harder. I'm pretty sure it's hardware related, i read often that users experience it when changing from an warm room to a colder one, or in regions where its verry humid(some circuit closes maybe...). so Mshr73 is on the right way as far as i can tell.
Dexter's 1.4
^Sbk79^ said:
No way pal, I guess I'm in the opposite situation. It still happens to me, and sometimes I think it even got worse... well, I can always look at crazy keys as a "special feature" that no other tablet will have!!!
Click to expand...
Click to collapse
Really sorry mate, I hope it will solved this for others too...
Anyhow, it is so disturbing, that I was already considering to send the tablet back to Toshiba...
I'll try to do this weekend if I do not have too many customers. I post the result Monday.
Mshr73 said:
I'll try to do this weekend if I do not have too many customers. I post the result Monday.
Click to expand...
Click to collapse
I'm looking forward to your pictures, too... because my trial simply didn't work.
I tried with both a single piece of paper and then with 2 pieces wrapped in tape. I put these spacers between the back of the display and DC/audio connector.
In both cases, the crazy keys phenomenon started to happen after 15-20 minutes of usage.
In most cases, it starts to show when I unlock the device. As soon as I unlock it, home and menu buttons light up with no apparent reason and go crazy for 10-30 seconds.
Then, I even tried to loosen just a little the screws (I read, somewhere in the forum, of a guy who said that he solved his crazy keys and screen lag problems this way). I mean, all screws are now locked but not too tight. Well, I have to say that I don't have any screen lag anymore (I even removed the piece of paper, from the battery area, which used to solve the issue before) but crazy keys still happen. I'm going slightly mad
^Sbk79^ said:
I'm looking forward to your pictures, too... because my trial simply didn't work.
I tried with both a single piece of paper and then with 2 pieces wrapped in tape. I put these spacers between the back of the display and DC/audio connector.
In both cases, the crazy keys phenomenon started to happen after 15-20 minutes of usage.
In most cases, it starts to show when I unlock the device. As soon as I unlock it, home and menu buttons light up with no apparent reason and go crazy for 10-30 seconds.
Then, I even tried to loosen just a little the screws (I read, somewhere in the forum, of a guy who said that he solved his crazy keys and screen lag problems this way). I mean, all screws are now locked but not too tight. Well, I have to say that I don't have any screen lag anymore (I even removed the piece of paper, from the battery area, which used to solve the issue before) but crazy keys still happen. I'm going slightly mad
Click to expand...
Click to collapse
Well ... with a piece of paper the problem Come back.
I handed a piece of cardboard and the problem disappears.
I think that to raise the screen to solve them but I'm still not 100% sure.
Hi,
Got my s2 pretty much as soon as they were released on o2 and it's been great until now, but the home button has just become 'rattly'. There's more movement and noise before the button engages, as if something has broken underneath it.
Anyone else experienced this?
Just hoping o2 will replace with a new phone, and not refurbished..
Edit:
May have fixed this - I pushed left and right sides of button with both thumbs reasonably firmly (but not hard), and the button seemed to click back into place..
Bought mine on the 5th of may, no noise/rattling here.
Spoke to o2 and they're happy to replace, but have no stock now..
Jon_V said:
Spoke to o2 and they're happy to replace, but have no stock now..
Click to expand...
Click to collapse
nice one, thats under warranty right?
I have the same problem since yesterday. I've only had the phone for about 3 weeks.
rocketpaul said:
nice one, thats under warranty right?
Click to expand...
Click to collapse
Yeah. They replace with new within 28 days (which I'm just inside), otherwise it's a refurb.
yes i also have this its kinda annyoing
Yep, i have this problem as well
Id to like replace my phone (if possible), i got my phone from handtec.
Anyone know what i can do?
Before i do that have to find out how to unroot much my phone
Sent from my GT-I9100 using XDA App
Bit worrying that this isnt an isolated problem.
Would be interested to know how long it takes for it to develop for other people's phones?
It's worse for me on the left side of the button, same for you too?
Jon_V said:
Bit worrying that this isnt an isolated problem.
Would be interested to know how long it takes for it to develop for other people's phones?
It's worse for me on the left side of the button, same for you too?
Click to expand...
Click to collapse
I noticed this yesterday, too, on the right side. I've had the phone for 17 days.
I've updated the first post with what I think is a fix.
I have this rattling too, noticed it yesterday. Pressing it firmly fixes the issue for some 10-20 clicks - but then it's back again.
Same here.. Often the button clicks but there is no registration only when pressing it firmly it will exucte,
It just started on mine too it seems.
Home Botton issue..
I hate the home button, I like the buttons on the Samsung Captivate better.
I had a issue with my home button, after I put on an aftermarket screen protector. I tried to use water to help apply the protector, and it seemed to have gotten behind the button, causing it not to work after drying. After tearing apart the phone and getting behind the boards I didn't see a way to the button, it seems you have to separate the screen from the frame to get to the electronics behind the frame (most likely destroys the phone). I did notice double-sided sticky tape behind the frame, most likely industrial type.
Put the phone back together and got some Flux-Off that I had for cleaning circuit boards , applied it at the button just as the water got into it. Fixed my issue and the button is making good contact now.
All that just for me to say, it worked better with the older design.
I don't know about your buttons, but mine has stopped rattling. Perhaps some glue needed more time to settle.
Sent from my GT-I9100
I bought the xperia mini (st15i) to my girlfriend a month ago.Everything is good at the beginning.Recently,however,the st15i often automatically returns,no matter open what program.
I read many of these problems on the Internet, in the end what is the reason? Sony Ericsson's hardware design problem?
Haha, no (if i got it right). I had that issue too, and i thought at first sight it was some system/hardware issue as well. But then i realized it's just a part of my hand that comes too close to the soft keys when i'm holding the phone in one hand. In that case the soft keys aren't very handy. A little bit too much pressure or a gentle touch/slide and it's (accidentally) activated.
Most of the time, it appears when you use the phone with your left hand. Just make sure she doesn't accidentally press the return soft key. That's all i can say about it.
Sent from my ST15i
Georg1992ad said:
Haha, no (if i got it right). I had that issue too, and i thought at first sight it was some system/hardware issue as well. But then i realized it's just a part of my hand that comes too close to the soft keys when i'm holding the phone in one hand. In that case the soft keys aren't very handy. A little bit too much pressure or a gentle touch/slide and it's (accidentally) activated.
Most of the time, it appears when you use the phone with your left hand. Just make sure she doesn't accidentally press the return soft key. That's all i can say about it.
Sent from my ST15i
Click to expand...
Click to collapse
In fact,I think it was a hardware issue.So many people have the same problems.
You can see this video.
:v.ku6.com/show/t77pZQx6Az6ujxFV.html
ps.I's a Chinese video website.
In some Chinese bbs,I saw many of the same description of the issue.But I can find a good solution for the st15i,so I came to this bbs to ask for help!
I had my razr for about 2 weeks, and this problem already happen to me a few times.
The touch screen will suddenly not responding to ANY touch, only the the buttons are still working(include the 4 buttons on the bottom).
I had to hard reboot my phone to get it working again.
Does anyone face the same issue?
Sent from my XT910 using XDA App
WongJames said:
I had my razr for about 2 weeks, and this problem already happen to me a few times.
The touch screen will suddenly not responding to ANY touch, only the the buttons are still working(include the 4 buttons on the bottom).
I had to hard reboot my phone to get it working again.
Does anyone face the same issue?
Sent from my XT910 using XDA App
Click to expand...
Click to collapse
Yes I also face this type of problem while playing games. Screen become unresponsive while playing but can solve by pressing power button(no need to reboot).Not on 2.3.5 base only on 2.3.6.
I also face this problem, after updating my rom to arctic 2.0 rom, which uses some stuff from 2.3.6.....power does not help, have to hard reboot. any idea why?
I've had this problem happen to me on my Droid RAZR (CDMA Verizon), can't remember if its before or after I was rooted... I just had to hard restart and its only happened once since then.
pswin09 said:
Yes I also face this type of problem while playing games. Screen become unresponsive while playing but can solve by pressing power button(no need to reboot).Not on 2.3.5 base only on 2.3.6.
Click to expand...
Click to collapse
The power button does not work for me
I had try to press the power button, but then the screen still not responding, so I cannot pass through the lock screen, and have to hard reboot......
I am on stock rom, 2.3.5, the Asian version.
But it seems it does not matter to different region's razr since the cdma one had the same issue
Sent from my XT910 using XDA App
I get this too. I had 3 razrs, first two had dead pixels so I had them replaced, all had this issue. Has not happened in awhile and I can't remember if it was always with a game, but at least one time it was with a game. Anyway, I don't think this has to do with rooting because my first one I never rooted and it did this. Don't remember if power button worked or not, but I had to reboot as well with power and volume down, or up, whatever it is, to get it to respond again.
No problems here.
I have had this happen about 4 or 5 times for me as well - got it day of launch. Mine says it is the XT912 though - is that right?
XT912 is the Verizon specific one, so yes.
Seems to be a fairly common issue. What is the chance that this is a software problem as opposed to a hardware one and so will be fixed with an update?
I had it happen for the first time yesterday after about 5 weeks or so, strange cause I wasn't doing anything. Battery was at about 15% though...
I only encounter this bug when I open Rom Toolbox for the first time and the superuser permissions screen shows up. My screen doesnt respond to touch anymore. I have to use the power button to make it work. Thats it. It happens nowhere else.
I've been using ROM Toolbox since day one, can't say it's the issue.
Sent from my XT910 using xda premium
opensourcefan said:
I've been using ROM Toolbox since day one, can't say it's the issue.
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Happened to me today...any need to panic?? On official Stock ROM 2.3.5...
Also, is this a hardware issue or software??
My problem is bit different, on a 4 month old unrooted razr.
Touch screen will start to fail recognizing my sywpe typing and start jumping all over the place, or it will end the word while I'm still sywping the word...
Sometimes it types in different letters (1/2 keyboard away) when I'm not sywping to avoid this BS when it happens.
Unfortunately, I cannot reproduce this result whenever I want to, I'm currently trying to reproduce the situation.
I believe this happens more often when my battery is low... or when I have been using it for an extensive time.
I go to draw program to test if it is the hardware problem and it is jumpy too, but not by much.
The problem does get better with reboot, but not 100% of the time, so I can't conclude it is SW problem
I also have issues with this. I think the problem is software side. It seems to be poorly responsive often after I unlock my phone and try to swipe screens.
Also while typing quickly with two hands it often does not input all the letters I type, although it flashes the keys and acknowledges that I touched them (this one might be a keyboard issues, not sure yet)
And ya, on an all black screen, I'm noticing some dead pixels- a lot of rectangular patches of dead pixels. I don't really notice it anytime else except when it's all black.
Been making me double think my choice, but I will wait for ICS update and possibly bootloader bypass. But.. I might be getting another phone shortly just because of the size (bezel mostly), these touch screen issues, and the performance isn't exactly where I anticipated it to be.
Razr XT910 touchscreen randomly jumping or not responding
I'm having all the problems mentioned earlier:
- touchscreen stops working randomly
- touch "jumps", like someone is touching it in random places
- some letters on the keybord stop working randomly
- phone gets quite hot at the top
My XT910 is not altered in any way, stock android 2.3.5, as updated as possible.
This happened when it was up-to-date and the very clean one.
This happens really irregularily. At first it happened when I played multitouch games - at some point the touchscreen just stopped responding and could only go back or lock the screen (but not unlock it, obviously).
Twice it happened when I was just going through messages or contacts.
I sent it to Motorola to fix it - they just reset it, benchmarked it for 45seconds and sent it back.
The very evening I got it back I tried to "heat" it myself - I installed a lot of apps, played a lot multitouch games on 3d graphic and voila! - it started freaking out like never before (vidoe in zip file attached).
My last idea is that it happens because of a low quality generic anti-scratch foil on the screen. So I threw it away and tried to "heat" the phone again - nothing.
I used a different foil - anti-reflecting + benchmarking apps - nothing.
If it happens again I'll send it with this video + the one I'll make then.
Hope it gets Motorola specialists off their ass and back to work .
Hey there, my maxx has this weird issue with it's screen too.
Take for example, a game with on screen controller like reckless racing. If i push the screen too long, it won't recognize my press anymore in the pressed area. I tried to go back home, thinking this is the game issue, but it's not, the home launcher button that coincidentally in the same location with game control button is unclickable. i tried with phone tester app and it show the same symptom, the pressed area indicator will disappear within 1-2 minutes.
The only solution is to turn off display and turn it on again. Should i bring it to service center?
Sent from my XT910 using xda app-developers app
Hello, I've recently having this exact same problems with my Motorola Droid Razr Maxx.
The screen sometimes doesn't respond as it should:
-Random touches.
-Not detecting swipes.
-Not detecting anything at all after long press.
-Detecting the touch location wrongly...
When this happens, sometimes a reboot fixes everything. Others, I just have to stop using the phone, and come back later.
Has anyone managed to find a possible cause and/or solution to this problem?
I've tried diferent roms, full reset, rsd flashes... But still the same problem