Related
Hi All,
For my blackstone, i need some spare parts. Does somebody know where to buy:
-torx screws
-bluetooth & gps connection cables
-probably a new main board
Tnx!!
Dennis
same here! especially gps cable
Cetin said:
same here! especially gps cable
Click to expand...
Click to collapse
E
B
A
Y
The magic site
But, most probably you can't get a new main board from ebay. I doubt even HTC has them. Changing a new main board is essentially like changing the whole phone, no?
Hello if your mainboard has gone wrong send it to HTC. The mainboard on my HD packed up I got in touch with HTC UK http://www.htc.com/uk/ (go to support and phone them up) they picked the phone up a week ago Tuesday tested the phone/fitted a new mainboard and sent it back, got it back last Wednesday. Fixed for free, very polite and very helpful
Jez
the problem is that my device felt to the ground after 2 months :S Then i got my screen repaired but not by htc since it is not warranty. The device still resets every now and then, so i try to fix it myself... that's why i need these spare parts... so suggestions still welcome!
nobody?
The only possible place to get a new mainboard will be htc.com. Also why a gps cable when the touch has built in gps. jez
jez.stix said:
The only possible place to get a new mainboard will be htc.com. Also why a gps cable when the touch has built in gps. jez
Click to expand...
Click to collapse
You didn´t understand the gps cable thing. It´s the gps cable behind the cover.
damasterman said:
nobody?
Click to expand...
Click to collapse
I had a Hermes that kept resetting after loading a new ROM. I changed it to another and it stoppped happening....Are you sure it's not a software problem?
damasterman said:
Hi All,
For my blackstone, i need some spare parts. Does somebody know where to buy:
-torx screws
-bluetooth & gps connection cables
-probably a new main board
Tnx!!
Dennis
Click to expand...
Click to collapse
Hey damasterman,
did you find any part?
I still need a gps cable. I'm looking for it in ebay but no way.
Can anyone help me getting a gps cable?
Push...
No one still don´t know where to find coaxial cable from inside?
Cetin said:
Push...
No one still don´t know where to find coaxial cable from inside?
Click to expand...
Click to collapse
Try this one:
www.farnell.com
search on item 1325918
it's 3cm to long but schould fit
Good luck
Wow!
I think that´s it.
Did you try this one?
Is it the right size?
Cetin said:
Wow!
I think that´s it.
Did you try this one?
Is it the right size?
Click to expand...
Click to collapse
I'll get it tomorrow and try it later, let you know if it fits, i know for sure about te connectors, but it is 3cm longer, so should see if you can put the 3cm anywhere under the mainboard.
Cu, Mario
Usemyass said:
I'll get it tomorrow and try it later, let you know if it fits, i know for sure about te connectors, but it is 3cm longer, so should see if you can put the 3cm anywhere under the mainboard.
Cu, Mario
Click to expand...
Click to collapse
Did you try this one and what part number did you end up ordering?
HTC HD Top volume board
Anyone know where to get the top volume board for the HTC Touch HD?
Cetin said:
Wow!
I think that´s it.
Did you try this one?
Is it the right size?
Click to expand...
Click to collapse
I put it today into the HTC HD, it fits, but like i said its 3 cm to long but you can put the 3 cm extra coaxial parrallel to the red/black vibrator cable.
Good luck
try gsm4world.us ...got lots from there for my touch hd
tacginc said:
Anyone know where to get the top volume board for the HTC Touch HD?
Click to expand...
Click to collapse
am looking for the same part a friend found this.. ebay item 190342978567 am gonnd try it out soon!
hi
i have a htc touch plus or as they call it htc touch dual.digitizer issue it stoped responding so i bought new one fitted in and still the same problem .i think is a software problem i guess driver software for touch screen .if any one can help please
thanks
Touch Dual digitizer
Hi Saliml2
Not convinced it is a software issue. My digitizer on T-Mobile Touch Plus did the same thing. It stated behaving erratically and then stopped responding altogether. I replaced the digitizer (via eBay) and it work for a few days and then stopped again.
I have read around the internet and have tried several ROM updates etc (currently running a WM 6.5.5 found in other area of this forum) but this has not solved the problem.
It seem to be an alignment issue - i.e. screen alignment is outside the screen area, but there seems to be no way of getting it back. Could be a fault on the phone mainboard (?) but there doesn't seem to be any info around apart from sending it to HTC for repair (not viable as the phone value negates this)
My phone is still not working, I might try opening it up again and reseating the digitizer cable but have done this twice already.
Have you try change the flex cable?
I had one to, with the same problem, and after changing the flex everything was ok...
Good luck!
Hi Amokh Just to clarify, what is the flex cable? The digitizer has a cable already attached to it that plugs in to a zif connector on the mainboard - I assume that this controls the data flow for the digitizer.
Any help would be appreciated.
deepthought2471 said:
Hi Amokh Just to clarify, what is the flex cable? The digitizer has a cable already attached to it that plugs in to a zif connector on the mainboard - I assume that this controls the data flow for the digitizer.
Any help would be appreciated.
Click to expand...
Click to collapse
Maybe this is helpfull http://www.pdacenter.ru/razborka/razbor_htc_touch_dual/
Goodluck
Flex cable, i was mean the cable between the mainboard and the lcd block, you can see it in the previous link, picture 20. Have you try it to change?
hello guys how did you manage to put the digitizer cable in place mine doesn t seem to get in place do i need something to hold the connector in place???
For those who have never seen the hd2 mainboard and dont know which parts function as what im uploading two pictures of the mother board with some main parts explained
photos taken from nokia n82
arzin said:
For those who have never seen the hd2 mainboard and dont know which parts function as what im uploading two pictures of the mother board with some main parts explained
photos taken from nokia n82
Click to expand...
Click to collapse
My Connector for lcd is broken.. how can i get a new one?? any ideas??
if your connector is broken you need to a buy a new mainboard since HTC wont replace it.You can ask a local dealer if its available but here in india it isnt available..I dropped my phone and so i got a connector issue hence replaced the mainboard
no-wonder it overheats and shuts down under stress! look at all the **** down there
where to buy a mainboard ? any links or ebay ?
i coudlnt find any links to buy the mainboard so i bought it from HTC and its very expensive i paid 8000rupees i.e186$ approx in india
daiash said:
no-wonder it overheats and shuts down under stress! look at all the **** down there
Click to expand...
Click to collapse
lol ive never faced a problem of heating and ive faced the problem of freezing like once or twice in a 5months
Hi arzin, can you tell where about the vibrator located at? is it easy to replace in your opinion?
Thanks..
Owen
Hello,
small up
The vibrator is just next to the flash, and it replaces easily
mainboard
Somebody tell me please the product number of European HD2 mainboard (NoT for US, they are different).
do we no anyone that supplies the main board yet, ???
Hi
I have a problem with a HTC Touch HD, i bought in ebay.
It had a broken LCD screen , I have changed it and now it works.
Now the problem is that ,when I have opened it to change LCD ,i saw that there wasn't the Wifi / BT coaxial cable.
I can't find a replace part in ebay and ,generally, in Internet.
Have you some ideas about where I can find this cable?
Thank you
giorgiocol78 said:
Hi
I have a problem with a HTC Touch HD, i bought in ebay.
It had a broken LCD screen , I have changed it and now it works.
Now the problem is that ,when I have opened it to change LCD ,i saw that there wasn't the Wifi / BT coaxial cable.
I can't find a replace part in ebay and ,generally, in Internet.
Have you some ideas about where I can find this cable?
Thank you
Click to expand...
Click to collapse
try your look at http://www.htcrepairparts.com/htc-touch-hd-c-129_220.html?language=en
and at http://www.globaldirectparts.com/HTC-Replacement-Repair-Antenna-s/5700.htm
I recently replaced a cracked digitiser in my X10. After replacement, the LCD no longer displays an image (but it lights up).
I thought maybe the LCD ribbon was damaged as a result of the repair, so I got a new one and replaced the LCD to no avail.
I also found the vibration motor had came off, and I soldered that back on (the motor is working again), but I'm thinking that maybe it ripped some of the board off with it, as the bottom of the motor as some green board on it, and it's slot on the mobo has some brown board showing in that area. This could just be a convenient seating for the motor, but I'm not sure, as I don't have another to test with.
The phone boots, and it makes a sound when I hit the volume keys, and it vibrates when I unlock it (even though I cannot see anything).
Does anyone have any further experience with the X10 that could help me diagnose my issue?
Thanks
Bump?
look for broken circuit traces and check the display connecton the board it may have pinns ripped out of place pictures would also help
I desoldered the motor again so that I could show you.
and re-soldered it (The motor still works, btw).
I also cleaned around the board with isopropyl alcohol.
As far as I can see, there is no further damage to the board, and the screen is new, so it shouldn't be an issue.
The digitiser, and the sound works, (I can hear sounds with the volume keys, and I can feel the vibration of unlocking).
I removed and re-inserted the pins on the removable connector on the LCD screen, with no avail. They seem ok.
I'm outta ideas. Anyone?
(Images attached)
Cable? Whats wrong with the old one
Sent from my X10i using XDA
[email protected]_me said:
Cable? Whats wrong with the old one
Sent from my X10i using XDA
Click to expand...
Click to collapse
What cable are you referring to?
This?
What happens when you press in the connector while booting up you ha be exposed copper fix that one too will lead to corrosion
Sent from my X10i using XDA
[email protected]_me said:
What happens when you press in the connector while booting up you ha be exposed copper fix that one too will lead to corrosion
Sent from my X10i using XDA
Click to expand...
Click to collapse
Which cable? I tried pressing down on all 4 of the connectors (one at the top next to the USB, and the three on the sides on the bottom next to where the battery sits.
I also tried pressing on the motor. Nothing.
Anything else?
Yup remember a PSP screen acting erratically cuz it's cable is damaged
Sent from my X10i using XDA
Could you desolder the board stuck to the motor see if there are traces leading to the LCD connector if it is then repair is least likely since there are no traces left below or the whole layer holding the traces are ripped off
Sent from my X10i using XDA
Do you have another board or another flex cable?
Sent from my X10i using XDA
I don't think it's a good idea to de-solder the board attached to the motor, as there is no fixing fixing it that part anyway, and it will just risk further damage.
I have 2 LCD screens. This one is new. Both don't work. I don't think the LCD screen itself is the issue, which makes me believe the problem is the mobo.
Thanks for your help so far. If you or anyone else has any more ideas, then I will listen, otherwise, I'm gonna try cook this board as a last resort... got nothing to lose, really and in a rare-case, maybe it will help fix some loose solder joints I can't get to
Are you using the old cables
Sent from my X10i using XDA
The trace underneath the motor seems to damaged try inspecting that first before throwing it in the oven
Sent from my X10i using XDA
Are those caps/resistor beside the motor on the ripped of board?
Sent from my X10i using XDA
[email protected]_me said:
Do you have another board or another flex cable?
Click to expand...
Click to collapse
[email protected]_me said:
Are you using the old cables
Click to expand...
Click to collapse
I don't have another mobo, but the cables on the LCD are new. The other cables are old, but seem to be working. Everything but the LCD works.
[email protected]_me said:
The trace underneath the motor seems to damaged try inspecting that first before throwing it in the oven
Click to expand...
Click to collapse
I'll have to desolder the motor again. I'll have a look soon.
[email protected]_me said:
Are those caps/resistor beside the motor on the ripped of board?
Click to expand...
Click to collapse
I cannot see any components on the ripped-off piece of the board.
Thanks for all your help so far