Hi All,
For my blackstone, i need some spare parts. Does somebody know where to buy:
-torx screws
-bluetooth & gps connection cables
-probably a new main board
Tnx!!
Dennis
same here! especially gps cable
Cetin said:
same here! especially gps cable
Click to expand...
Click to collapse
E
B
A
Y
The magic site
But, most probably you can't get a new main board from ebay. I doubt even HTC has them. Changing a new main board is essentially like changing the whole phone, no?
Hello if your mainboard has gone wrong send it to HTC. The mainboard on my HD packed up I got in touch with HTC UK http://www.htc.com/uk/ (go to support and phone them up) they picked the phone up a week ago Tuesday tested the phone/fitted a new mainboard and sent it back, got it back last Wednesday. Fixed for free, very polite and very helpful
Jez
the problem is that my device felt to the ground after 2 months :S Then i got my screen repaired but not by htc since it is not warranty. The device still resets every now and then, so i try to fix it myself... that's why i need these spare parts... so suggestions still welcome!
nobody?
The only possible place to get a new mainboard will be htc.com. Also why a gps cable when the touch has built in gps. jez
jez.stix said:
The only possible place to get a new mainboard will be htc.com. Also why a gps cable when the touch has built in gps. jez
Click to expand...
Click to collapse
You didn´t understand the gps cable thing. It´s the gps cable behind the cover.
damasterman said:
nobody?
Click to expand...
Click to collapse
I had a Hermes that kept resetting after loading a new ROM. I changed it to another and it stoppped happening....Are you sure it's not a software problem?
damasterman said:
Hi All,
For my blackstone, i need some spare parts. Does somebody know where to buy:
-torx screws
-bluetooth & gps connection cables
-probably a new main board
Tnx!!
Dennis
Click to expand...
Click to collapse
Hey damasterman,
did you find any part?
I still need a gps cable. I'm looking for it in ebay but no way.
Can anyone help me getting a gps cable?
Push...
No one still don´t know where to find coaxial cable from inside?
Cetin said:
Push...
No one still don´t know where to find coaxial cable from inside?
Click to expand...
Click to collapse
Try this one:
www.farnell.com
search on item 1325918
it's 3cm to long but schould fit
Good luck
Wow!
I think that´s it.
Did you try this one?
Is it the right size?
Cetin said:
Wow!
I think that´s it.
Did you try this one?
Is it the right size?
Click to expand...
Click to collapse
I'll get it tomorrow and try it later, let you know if it fits, i know for sure about te connectors, but it is 3cm longer, so should see if you can put the 3cm anywhere under the mainboard.
Cu, Mario
Usemyass said:
I'll get it tomorrow and try it later, let you know if it fits, i know for sure about te connectors, but it is 3cm longer, so should see if you can put the 3cm anywhere under the mainboard.
Cu, Mario
Click to expand...
Click to collapse
Did you try this one and what part number did you end up ordering?
HTC HD Top volume board
Anyone know where to get the top volume board for the HTC Touch HD?
Cetin said:
Wow!
I think that´s it.
Did you try this one?
Is it the right size?
Click to expand...
Click to collapse
I put it today into the HTC HD, it fits, but like i said its 3 cm to long but you can put the 3 cm extra coaxial parrallel to the red/black vibrator cable.
Good luck
try gsm4world.us ...got lots from there for my touch hd
tacginc said:
Anyone know where to get the top volume board for the HTC Touch HD?
Click to expand...
Click to collapse
am looking for the same part a friend found this.. ebay item 190342978567 am gonnd try it out soon!
Related
Ignore the title, looks like a mis-aligned pin and a coincidence.
-Stoney
Sounds like a coincidence to me. I really don't see how it's possible for that software to have done that.
anythingbutmine said:
Sounds like a coincidence to me. I really don't see how it's possible for that software to have done that.
Click to expand...
Click to collapse
Everything worked fine until that program crashed my phone (was able to charge via A/C adapter/usb cable/sync etc). I was able to replicate the crash (and only a hard-reset makes the O/S operational again).
perhaps it could have been a coincidence.... i do have the $6 a month insurance... i'm thinking i should try to get the Radio/ROM back to stock and just ship this f*cker back to verizon.
I got the verizon boot screen to appear, but it hangs.
Good news is the proper radio shows up,
bad news is these still appear:
bootloader 2.40.Olipro
ROM Version: 3.2.3
I can't seem to find a microSD version of the post-GPS update relocker (back to factory). The stock rom installation just hangs =(.
I'm guessing this would be a red flag for a warranty return?
Edit/Delete Message
ssstonebraker said:
I can't seem to find a microSD version of the post-GPS update relocker (back to factory). The stock rom installation just hangs =(.
Click to expand...
Click to collapse
flash back on a ROM that is supported, then run the titan relocker, and use microSD to flash back to stock after relocking...
Read instructions and download the Stock ROM and relocker from:
http://wiki.xda-developers.com/index.php?pagename=TitanStockHome
I'm going to attempt that now.
Actually i noticed one of the pins in the mini USB port wasn't aligned with the others, i moved the pin where i thought it should be, but i'm still not getting any power.
Does anyone have a high resolution picture of the mini-usb port?
I am now successfully running:
Phone: xv6800
ROM Version: nueROM v2.1 build 5068.rar
Radio Version: 3.42.02
1. i reflashed 3.42.02 (http://rs333.rapidshare.com/files/124696893/Titan_Radio_ROM_3.42.02.rar) via micro SD.
2. Flashed the RUU_signed.nbh from RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship
3. Rebooted before customization
4. Installed ftp://ppcgeeks.com/Titan/Users/No2Chem/nueROM v2.1 build 5068.rar from Micro SD (then ran verizon cusomization)
However, i still don't have usb power/sync.
I'm going to mess with the pins per these pics that were given to me from ppcgeeks:
http://www.4winmobile.com/tg/Xda_Trion/008.jpg
http://www.4winmobile.com/tg/Xda_Trion/014.jpg
I just took a picture of my mini-usb port on my HTC Titan (xv6800). I'm not sure what's wrong with it, i think it is a pin issue:
http://stashbox.org/166879/xv6800_busted_mini_usb.PNG
any advice on what to move would be appreciated!
Thanks,
Stoney
What a coincidence. My port must have broke just before I flashed my phone via sd. When I attempted to sync after the flash, I couldn't charge or sync. I assumed it was the flash and re flashed several times till I finally looked at the port. The port design is not the sturdiest, especially for considering that it is intended for headphone use along with the usual charging/syncing. It's a set of pins with a unattached and easily broken plastic guide underneath. It's all too easy for the plastic guide to break or bend, exposing the pins to easy breakage/ bending. My cheap $90 Pharos GPS's port has contacts instead of pins embedded in the guide, seemingly a far more durable design. I swapped out my phone with Sprint. When I explained the problem to the tech, she didn't even look at the phone and immediately set up the swap. I took this to mean that this was an extremely common problem with the Mogul/6800. Good luck!
From your pic, I doubt you'll be able to straighten that pin without it breaking. Even if you did, it would likely break soon after. If Verizon won't swap and/or is high priced for the repair, http://www.pocketpctechs.com/main~unit~HTC_Mogul-906~area~repairs.htm
jph8tr said:
What a coincidence. My port must have broke just before I flashed my phone via sd. When I attempted to sync after the flash, I couldn't charge or sync. I assumed it was the flash and re flashed several times till I finally looked at the port. The port design is not the sturdiest, especially for considering that it is intended for headphone use along with the usual charging/syncing. It's a set of pins with a unattached and easily broken plastic guide underneath. It's all too easy for the plastic guide to break or bend, exposing the pins to easy breakage/ bending. My cheap $90 Pharos GPS's port has contacts instead of pins embedded in the guide, seemingly a far more durable design. I swapped out my phone with Sprint. When I explained the problem to the tech, she didn't even look at the phone and immediately set up the swap. I took this to mean that this was an extremely common problem with the Mogul/6800. Good luck!
Click to expand...
Click to collapse
very interesting, i agree they need to do something about the design of these ports. Never again will i just jam in the usb cable.
Here's my fix....
YES!!! I TOTALLY FIXED IT! (with screenshots):
http://stashbox.org/166905/xv6800_fixed_mini_usb.png
I also broke my port. I went to plug in my charger got a hint of resistance and when I pulled the charger out I noticed one of the pins was laying flat against the back of the mini USB port. Well I tried go get a small knife and pry the pin back only for it to break. I was completly screwed. Now I have to charge my batteries and just trade out.
ssstonebraker said:
very interesting, i agree they need to do something about the design of these ports. Never again will i just jam in the usb cable.
Here's my fix....
YES!!! I TOTALLY FIXED IT! (with screenshots):
http://stashbox.org/166905/xv6800_fixed_mini_usb.png
Click to expand...
Click to collapse
GREAT JOB! Congrats! You also have the most scratched up port I've ever seen . Hopefully, it will hold up. The plastic guide that is now bent away from the pins and likely loose like on my old Mogul isn't like that on a new unit and the straightened pin is weak at the bend. Be very careful using the port.
ssstonebraker said:
very interesting, i agree they need to do something about the design of these ports. Never again will i just jam in the usb cable.
Here's my fix....
YES!!! I TOTALLY FIXED IT! (with screenshots):
http://stashbox.org/166905/xv6800_fixed_mini_usb.png
Click to expand...
Click to collapse
your usb looked like that and you thought software did it?
ssstonebraker said:
very interesting, i agree they need to do something about the design of these ports. Never again will i just jam in the usb cable.
Here's my fix....
YES!!! I TOTALLY FIXED IT! (with screenshots):
http://stashbox.org/166905/xv6800_fixed_mini_usb.png
Click to expand...
Click to collapse
For what its worth, here is pics of mine. Doesn't have raised pins like yours?
ih8aol said:
For what its worth, here is pics of mine. Doesn't have raised pins like yours?
Click to expand...
Click to collapse
can you post a high-res version of those pictures via stashbox.org? Are you saying that your pins touch that black piece?
ssstonebraker said:
can you post a high-res version of those pictures via stashbox.org? Are you saying that your pins touch that black piece?
Click to expand...
Click to collapse
Here you go!
http://stashbox.org/168432/DSC_0006.JPG
http://stashbox.org/168431/DSC_0005.JPG
http://stashbox.org/168428/DSC_0004.JPG
ih8aol said:
Here you go!
http://stashbox.org/168432/DSC_0006.JPG
http://stashbox.org/168431/DSC_0005.JPG
http://stashbox.org/168428/DSC_0004.JPG
Click to expand...
Click to collapse
I have the RAW versions of these too but they roughly 10mb each
ih8aol said:
I have the RAW versions of these too but they roughly 10mb each
Click to expand...
Click to collapse
Thank you for posting those. I zoomed in on the portion i was interested in (from your photo) and it is still a little fuzzy http://stashbox.org/168469/mini_usb_1299x729xfuzzy.png.
Anyway I could get a high rez (no fuzzy) png or RAW of just the mini-usb port? I'm thinking the raw could be thrown up on rapidshare or something.
BTW your pics look great, thank you very very much!
ih8aol said:
For what its worth, here is pics of mine. Doesn't have raised pins like yours?
Click to expand...
Click to collapse
It's not that the pins are raised, it's that the plastic piece (guide?) is not attached to the pins and may break and/or become loose exposing the pins to damage. Cheap design from a company that knows how!
I am not at all impressed with HTC's build quality, when my USB port broke I also had the dreaded white spot and a failing keyboard. When the time comes to replace my Mogul, I 'm going to be looking to avoid HTC and WM! I've had several Windows Mobile and WinCE PDA's and phones over the past 6-7 years and they still can't figure out how to keep the thing from turning on by itself periodically. Hopefully, my new replacement Mogul will last long enough for that phone to be developed. I'll even consider joining the cult of Jobs!
You mention the dreaded white spot. How common is this? VZW just sent me a refurb for mine and it also has the same white spot I complained about on the one going back to them. I have seen other threads on Howards mentioning it but I am course how bad the issue truly is. My coworker has a 6800 with no white spot and two other people have Moguls with no white spot. I must have the luck for getting this.
Greetings.
Anyone knows where I can find a coaxial cable for the wifi for the HD2?
It's not only nicotine u use, is it. Wat the hell do you mean
If you're thinking of hooking up an external antenna to your HD2, as far as I know you'd have to open up the HD2 and wire on a coax port to the right part of the board, and I've got no idea how to get that working!
If you do manage to do this, let us know how!
Sorry if I've misunderstood your rather strange question!
Did you lose it when disassembling your HD2 or something?
I believe it's just a standard coax cable with u.fl connectors, the problem would be finding one with correct length. eBay has plenty, but they're anywhere from 20 to 50cm - don't really want to try fitting that in a phone...
you can find them at mouser com
i need also one and did some search work
you need i W.FL-2LP-04N2-A-(60) u.fl is a lit bigger.
2lp means two sides connector 04n ticknes 0.83mm, 2 color, (60= lenght)mm.
see also data sheet in table on the side. looks, they sel also just one.
i not alowed to place the link. becourse i am new here.
onlly did not fnd out or the have also female connectors
ewdin said:
Did you lose it when disassembling your HD2 or something?
Click to expand...
Click to collapse
Yup! Correct!
Thank you all for your replies. I did find one on ebay, from a broken one.
I hope he will sent me the right one. If not I'll try ur suggestion Tristan_1. Thx
I was on same situatio with wifi cable. Searched over net and nothing. Looked to here recommended shop too. Price for shpping to europe is 10 times bigger than cable itself.
But i finded on ebay cables to Touch Daimond. On pics they looks same like on hd2. I asked here on touch forum lengts for both cables. They are SAME with hd2 cables. Only difference is that hd2 uses for gps white one' touch black. I opened more 10 hd2 (all from europe). Abot t-mobile i cant say anything.
On ebay i finded many sellers with possible search string: OEM AERIAL ANTENNA WIRE RECEPTION FOR HTC TOUCH DIAMOND
Usually after two week i can finally confirm are these touch diamond cables right ones for hd2 too.
Sent from my HTC HD2 using Tapatalk
Tristan, THANK YOU THANK YOU THANK YOU!
I have been scouring the internet looking for this part and had no idea what to look for so thank you so much for your post. I purchased that part and hopefully I can report back that my phone works again!
.d2onderdelen .nl
i find out, that they have them also. and they sel them in pares. also other part of the hd2
Finally i can CONFIRM that YES wifi/bluetooth antenna coaxial cable is same what used on HTC HD2 (can confirm only EU model). About T-Mobile i cant say.
But GPS cable wich one sell with wifi/bluetooth cable dont fit. Its littlebit longer but short for using on GPS.
This one wich i bought dont had so quality on connectors side (not for many many times connect/disconnect) like original. Yes it was cheap too. But i tested work and signal and there was no loss.
Hope helped now many users who cant find replacment for wifi / bluetooth coaxial cable.
Just try on ebay string OEM AERIAL ANTENNA WIRE RECEPTION FOR HTC TOUCH DIAMOND or just try find spare parts for Touch Diamond. I itself used seller named gsm4world.
ahanssen said:
Tristan, THANK YOU THANK YOU THANK YOU!
I have been scouring the internet looking for this part and had no idea what to look for so thank you so much for your post. I purchased that part and hopefully I can report back that my phone works again!
Click to expand...
Click to collapse
Next time use Thanks button
Anyway, this info was FREE
Tristan_1 said:
.d2onderdelen .nl
Click to expand...
Click to collapse
Thanks but hard to explore site if its only on one lang and you dont know it.
It true that it is a bit hard to read dutch, but easy to find the right phone, and were you have to look for (onderdelen) that are the inner part of the phone
I find out that the coaxial cable are out of the store on the moment. i can not find them Anny more.
TRY HERE
For Coaxial try also parts4repair.com and search for bluetooth antenna and not for wifi (which are the same anyway).
For me the solution of using coaxial from Diamond did'nt work.
Hope this will...
Cheers
I am wondering if someone here could take apart their HD Dock and do a break down like i-fixit does. I am curious to see what parts are internal and im wondering if we could make a cable only solution kinda like back in the day with Treo Cables where you needed to flip 2 wires to get the phone in the correct mode.
pzztgotbagz said:
I am wondering if someone here could take apart their HD Dock and do a break down like i-fixit does. I am curious to see what parts are internal and im wondering if we could make a cable only solution kinda like back in the day with Treo Cables where you needed to flip 2 wires to get the phone in the correct mode.
Click to expand...
Click to collapse
And would you be donating the dock for this tear down?
ScandaLeX said:
And would you be donating the dock for this tear down?
Click to expand...
Click to collapse
Sure.... if you have one I can borrow
Please help, I miss my tablet.I had the common problem with the power thingy inside the tablet going out so i opened it to solder but did not fix.So i ordered the charging dock and waited for a month and a half.I get it today and was so excited to only plug it it and got power and charging everything is perfect,i go to swipe over on my arrow to unlock the screen and nothing!I have no touch controls on screen what so ever.But the soft keys work,they do not do me any good but they work.The home key takes me to my home page and mag glass goes to the internet.Does any body have any ideas of what could have happened or what i can do to fix this,please????
alcapone1130 said:
Does any body have any ideas of what could have happened or what i can do to fix this,please????
Click to expand...
Click to collapse
First, check for disconnected or loose cables inside the gTab.
Next, if it isn't a HW fault like loose cables, then connect the USB cable to the gTab and run this ADB command (you will have to install and set up ADB if you haven't already done so):
Code:
C:\SOME\PATH> [B]adb shell "echo -n 1 > /sys/devices/platform/tegra_touch/calibration"[/B]
Digitizer Cable/Connection
alcapone1130 said:
Please help, I miss my tablet.I had the common problem with the power thingy inside the tablet going out so i opened it to solder but did not fix.So i ordered the charging dock and waited for a month and a half.I get it today and was so excited to only plug it it and got power and charging everything is perfect,i go to swipe over on my arrow to unlock the screen and nothing!I have no touch controls on screen what so ever.But the soft keys work,they do not do me any good but they work.The home key takes me to my home page and mag glass goes to the internet.Does any body have any ideas of what could have happened or what i can do to fix this,please????
Click to expand...
Click to collapse
The attached pdf contains photos of the digitizer/cables and their connections inside the gtab. Check for loose connection and/or broken wires on both ends.
Al
aabbondanza said:
The attached pdf contains photos of the digitizer/cables and their connections inside the gtab. Check for loose connection and/or broken wires on both ends.
Al
Click to expand...
Click to collapse
Ok,First thank you so much for helping.Ok,One of the cables you shown does have two broken wires,it is the kind of short wire with black cloth like material over it that runs unde the shiny brown plastic piece.Is there a way to fix that or rig it to get me back up and touching again?Thank you again for helping me out,and you already pinpointed my problem,now i am hoping you can fix it,lol.
Where is the break?
alcapone1130 said:
Ok,First thank you so much for helping.Ok,One of the cables you shown does have two broken wires,it is the kind of short wire with black cloth like material over it that runs unde the shiny brown plastic piece.Is there a way to fix that or rig it to get me back up and touching again?Thank you again for helping me out,and you already pinpointed my problem,now i am hoping you can fix it,lol.
Click to expand...
Click to collapse
I assume since you didn't send in under warranty for the power connector that it's no longer under warrantly!
Exactly where is the break? Close to (or at) one of the connectors? Which end (motherboard end or digitizer end) of the cable? Obviously closness to the connector makes it more difficult. I have seen a post where another use had the break pretty close to the connector & fixed it though.
Al
I totally forgot that i made a youtube video yesterday,here is the address http://www.youtube.com/watch?v=kFNRtDhr5EQ I have been so stressed out about getting my gtab back it slipped my mind.Oh, the broken end is what plugs under the silver area not under the brown area.
aabbondanza said:
I assume since you didn't send in under warranty for the power connector that it's no longer under warrantly!
Exactly where is the break? Close to (or at) one of the connectors? Which end (motherboard end or digitizer end) of the cable? Obviously closness to the connector makes it more difficult. I have seen a post where another use had the break pretty close to the connector & fixed it though.
Al
Click to expand...
Click to collapse
I totally forgot that i made a youtube video yesterday,here is the address http://www.youtube.com/watch?v=kFNRtDhr5EQ I have been so stressed out about getting my gtab back it slipped my mind.Oh, the broken end is what plugs under the silver area not under the brown area.
alcapone1130 said:
I totally forgot that i made a youtube video yesterday,here is the address http://www.youtube.com/watch?v=kFNRtDhr5EQ I have been so stressed out about getting my gtab back it slipped my mind.Oh, the broken end is what plugs under the silver area not under the brown area.
Click to expand...
Click to collapse
If you magnify the digitizer circuit (lower photo in the pdf) you will see the label for each of the lines in the cable. Assuming the lines run straight thru, it looks like the ones that broke are the power & ground to the circuit (VSS & GND). That would explain the touch screen not working at all.
Hard to tell from the video where the breakis, but it looks real close to the connector.
Your best bet may be looking for someone who has a broken digitizer (outer glass) or gTab and is selling it for parts. I looked in the Marketplace forum here on XDA & there is one non working gtablet someone is asking $55 for. I also saw another one up for bid on ebay ($40 latest bid). You my have to ask if the cable is good on them.
Not a whole lot of options for repair. As you've already experienced, the cable is small & fragile.
If the connector has removable pins then you could remove the pins, solder the wire to it & reinsert the pins, BUT from the picture it doesn't look like they are removeable.
You could solder the 2 wires to the pins coming out the back of the socket but they look too small to easily solder to.
The last option would be to rigg the cable to work. There are a couple of possibilites but I would rather you consider the other options before suggesting a repair of the cable itself. If you can, see if you can take a closeup, high res photo of the back fo the connector where the wire broke. PM me & I'll send you my email address to send it too.
Al
aabbondanza said:
If you magnify the digitizer circuit (lower photo in the pdf) you will see the label for each of the lines in the cable. Assuming the lines run straight thru, it looks like the ones that broke are the power & ground to the circuit (VSS & GND). That would explain the touch screen not working at all.
Hard to tell from the video where the breakis, but it looks real close to the connector.
Your best bet may be looking for someone who has a broken digitizer (outer glass) or gTab and is selling it for parts. I looked in the Marketplace forum here on XDA & there is one non working gtablet someone is asking $55 for. I also saw another one up for bid on ebay ($40 latest bid). You my have to ask if the cable is good on them.
Not a whole lot of options for repair. As you've already experienced, the cable is small & fragile.
If the connector has removable pins then you could remove the pins, solder the wire to it & reinsert the pins, BUT from the picture it doesn't look like they are removeable.
You could solder the 2 wires to the pins coming out the back of the socket but they look too small to easily solder to.
The last option would be to rigg the cable to work. There are a couple of possibilites but I would rather you consider the other options before suggesting a repair of the cable itself. If you can, see if you can take a closeup, high res photo of the back fo the connector where the wire broke. PM me & I'll send you my email address to send it too.
Al
Click to expand...
Click to collapse
Wow,Thank you so so much,Can you get me in contact with the guy with the gtab for $55.00,i will buy it and transfer the cash to him immediately,that sounds like the best bet.I will msg you a really good photo still,incase i can not get my hands on the one for sale,but if i can let him know or maybe you could let him know that i will buy it quick enough maybe i can end up with it.I would really feel better just swapping the cable out with another.I will talk back with you tomorrow and again thank you for your time and great help,i really owe you.
Marketplace & Non Working Tab Links
alcapone1130 said:
Wow,Thank you so so much,Can you get me in contact with the guy with the gtab for $55.00,i will buy it and transfer the cash to him immediately,that sounds like the best bet.I will msg you a really good photo still,incase i can not get my hands on the one for sale,but if i can let him know or maybe you could let him know that i will buy it quick enough maybe i can end up with it.I would really feel better just swapping the cable out with another.I will talk back with you tomorrow and again thank you for your time and great help,i really owe you.
Click to expand...
Click to collapse
Here are several link for you
1. XDA Marketplace http://forum.xda-developers.com/forumdisplay.php?f=1321
2. Link to "Wanting to sell" subformum where I found the non working gtab (used forum search for gtablet) http://forum.xda-developers.com/forumdisplay.php?f=476
3. Link to not working gTab http://forum.xda-developers.com/showthread.php?t=1436549&highlight=gtablet.
Take a look at this post & email him to make sure you want it.
Al
aabbondanza said:
Here are several link for you
1. XDA Marketplace http://forum.xda-developers.com/forumdisplay.php?f=1321
2. Link to "Wanting to sell" subformum where I found the non working gtab (used forum search for gtablet) http://forum.xda-developers.com/forumdisplay.php?f=476
3. Link to not working gTab http://forum.xda-developers.com/showthread.php?t=1436549&highlight=gtablet.
Take a look at this post & email him to make sure you want it.
Al
Click to expand...
Click to collapse
Its amazing what a couple of stripped bread ties will doo,lol.I took a bread tie and stripped the paper off of it,cut it to the length I needed and wrapped the remaining wire to one end and pushed the other end of the tie inside the pin hole,lol.It worked like a champ! MY Grab has been up and running for over a month,I just knocked on my coffee table,lol.Thank you for helping me out I really appreciated you trying everything to help me.I am so happy to have it back,now if I can just figure out why I keep seeing black boxes on my games when I play them I will really be doing fine.Thank you again.
View attachment 2276746
this is break, What are the effects of it？
my touch screen is not work......
i am sure it about Static conducting~
thank you~
cx_star said:
View attachment 2276746
this is break, What are the effects of it？
my touch screen is not work......
Click to expand...
Click to collapse
So basically you created a thread for no reason. Cable damaged by the touchscreen sensor. Touchscreen does not work. End of story.
Close thread.
Sent from my MB860 using xda app-developers app
palmbeach05 said:
So basically you created a thread for no reason. Cable damaged by the touchscreen sensor. Touchscreen does not work. End of story.
Close thread.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
the cable is the reason??
the breaded cable are four or five lines.and they are connected to metal surface（i think they are GND)~
cx_star said:
the cable is the reason??
the breaded cable are four or five lines.and they are connected to metal surface（i think they are GND)~[/QUOTE
ok and the cable that you have circled, the tip of that goes to the touchscreen/digitizer. you said it yourself, "my touch screen is not work......" That's a clear indication that you should look at threads about the digitizer. What are people doing? They are replacing the digitizer and/or the cable. So what's the problem? Go buy a replacement cable. Why did you create a thread when you already know what your problem is, what the effect of the problem is, have a handful of threads discussing your problem already in existence that you refused to/were too lazy to read/go look for, and have various sites such as ebay at your disposal to fix your problem?
Close Thread.
Click to expand...
Click to collapse
Thread already reported. Waiting for mods.
palmbeach05 said:
cx_star said:
the cable is the reason??
the breaded cable are four or five lines.and they are connected to metal surface（i think they are GND)~[/QUOTE
ok and the cable that you have circled, the tip of that goes to the touchscreen/digitizer. you said it yourself, "my touch screen is not work......" That's a clear indication that you should look at threads about the digitizer. What are people doing? They are replacing the digitizer and/or the cable. So what's the problem? Go buy a replacement cable. Why did you create a thread when you already know what your problem is, what the effect of the problem is, have a handful of threads discussing your problem already in existence that you refused to/were too lazy to read/go look for, and have various sites such as ebay at your disposal to fix your problem?
Close Thread.
Click to expand...
Click to collapse
thanks~
I am not good at English~maybe i dont Express clearly
i have seen many threads of xda-developers.com and search by google,by baidu~
i have changed three touchscreen and two fingerprint~
and this touchscreen(include digitizer ) is just used Only a month~
the touchscreen not work ,and then i open the phone to see what is the problem , and then Break the cable~
i just want to know the breaked place have effect of touchscreen? because thay are only GND, not signal or VCC
Click to expand...
Click to collapse
You don't know that. It might look like it but I'm sure it actually isn't.
What is the point on having that many pins where all of them connect to GND?
If that piece had no function, they wouldn't even put it in, don't you think?
ravilov said:
You don't know that. It might look like it but I'm sure it actually isn't.
What is the point on having that many pins where all of them connect to GND?
If that piece had no function, they wouldn't even put it in, don't you think?
Click to expand...
Click to collapse
they are all connected to metal surface of back of the screen~
maybe function just like this :
http://forum.xda-developers.com/showthread.php?t=1719653&highlight=cable+atrix+4g
or something about Static conducting~
i just want to know they are obligatory？
it is feasible for weld another wire to the back of screen ?
if they are obligatory and can not be repaired , i will buy a cable~ i do't want to pay too much money ,the phone worth just ￥300 and i have pay ￥200+ to rpair it .