Related
Hello everybody,
im searching for a "normal" hdmi-cable for the 30-pin connector. i dont wanna have a dock or something.
does anybody know were i can find such cable?!
I have send the DOCK sample to the manufacturer, to make a 30pin--HDMI cable out.
But need sometimes. About 15days later.
XJARL,
Are you sure a cable is possible? Others have suggested that the port needs power and other circuitry (as in the dock) to make the HDMI functional.
Also, I thought that you mentioned you were having it made a month or so ago? What is the delay?
That would be great if there was just an HDMI cable that plugs into the bottom port. too bad they didnt make a HDMI port on the side before. I wont use it enough to get a dock, but if I had just a cheaper cable that would work I would be more inclined to use it. the screen is big enough to where im happy with the media and any movies that I really want to download and watch I will already have on my laptop which has HDMI out for a big screen.
Yes, i'm sure
insight3fl said:
XJARL,
Are you sure a cable is possible? Others have suggested that the port needs power and other circuitry (as in the dock) to make the HDMI functional.
Also, I thought that you mentioned you were having it made a month or so ago? What is the delay?
Click to expand...
Click to collapse
I had given the DOCK to a factory. They spend a lot of time. Since they are not sure whether there is sufficient market, so delayed. But now, they decided to put it produced.
ketjr81 said:
That would be great if there was just an HDMI cable that plugs into the bottom port. too bad they didnt make a HDMI port on the side before. I wont use it enough to get a dock, but if I had just a cheaper cable that would work I would be more inclined to use it. the screen is big enough to where im happy with the media and any movies that I really want to download and watch I will already have on my laptop which has HDMI out for a big screen.
Click to expand...
Click to collapse
I went to 4 Shacks and everyone said there was nothing made for this port. Commercially that is.
I think I would find a cable more useful than a dock. As mentioned above, though, they will have to find a way to deal with the power issue. I'll keep an eye on this thread to see how it goes.
A cable would be nice for sure
Xjarl - any word on this cable? I am sure we could build up some support here if needed
They just sold Over 10,000 of the Gtablets on Woot the other day. There were several posts directing people to this site as well as discussing the preference of a simple cable VS a dock.
I would hope the market would bear enough to get a run in at this point.
Didn't early reviews of the gtab often say Viewsonic was bunding an hdmi cable in the box?
blasturd said:
Didn't early reviews of the gtab often say Viewsonic was bunding an hdmi cable in the box?
Click to expand...
Click to collapse
nope, at least not as far as I can remember.
Would be great if you can post a link if you ever stumbled on it.
Has anyone attempted anything on this?
cobrast6 said:
Has anyone attempted anything on this?
Click to expand...
Click to collapse
Yeah, bnovak in this thread is talking about de-constructing one and analyzing the circuitry to figure out the pin schematic so a cable could possibly be created:
http://forum.xda-developers.com/showthread.php?t=865038&page=21
technically, I've found the right cable.
but I need to order 1000 of them.
Ordered a sample to make sure it is what it needs to be.
HDMI DOES NOT NEED TO BE POWERED!!! It's LVDS
How much to order 1000?
Sent from my ADR6300 using XDA Premium App
Now you tell me...
I just ordered the dock yesterday so I could use the HDMI.
Oh well...guess I need two cables.
My wife is going to wonder when my $285 Tab I talked her into letting me get for my birthday is going to stop costing money.
LowSky said:
How much to order 1000?
Sent from my ADR6300 using XDA Premium App
Click to expand...
Click to collapse
More than I have open on my Amex at the moment?
Dunno actually. Waiting for sample and a quote.
bnovak said:
technically, I've found the right cable.
but I need to order 1000 of them.
Ordered a sample to make sure it is what it needs to be.
HDMI DOES NOT NEED TO BE POWERED!!! It's LVDS
Click to expand...
Click to collapse
More info please.
bnovak said:
technically, I've found the right cable.
but I need to order 1000 of them.
Ordered a sample to make sure it is what it needs to be.
HDMI DOES NOT NEED TO BE POWERED!!! It's LVDS
Click to expand...
Click to collapse
Refer this to it2steve, I'm sure he'll bite!
Has anyone come across a cigarette lighter mount for the GSM TP2 that will also charge the device? It has to be for the GSM version as the CDMA ones have their usb port mounted slightly to the left of center where the GSM versions are mounted.
I found two different ones so far. One is a universal one made by Arkon and seems to be less sturdy than it should be. It has a pass-through 12v port to plug in a charger to it. It only concerns me that the way it is made, it seems to not be sturdy enough based on the reviews.
The other one is made by iGrip and is pretty nice. It is made for the TP2, but it has no power option at all. If this would have a charging port on it, it would be perfect.
Anyone else seen any other options?
here in the netherlands you can buy them and they support paypal if im correct
http://www.mytrendyphone.nl/shop/htc-touch-pro2-54906c1.html
shatred said:
here in the netherlands you can buy them and they support paypal if im correct
http://www.mytrendyphone.nl/shop/htc-touch-pro2-54906c1.html
Click to expand...
Click to collapse
Sorry, but I didn't see any mount for the Rhodium on the linked page. Thanks anyway.
cajunflavoredbob said:
.
Anyone else seen any other options?
Click to expand...
Click to collapse
I use this: http://www.bracketron.com/products/universal-usb-power-dock
I got it from Radio Shack with a 1 year warranty just in case. I did have it break on me but that's because I wasn't using it right. I was within the 30 day return period so i returned it an got a new one. If you do get it make sure you press the red button when adjusting the angle. I would still recommend ti since it has everything I was looking for. I doubt you'll be able to have the keyboard open, but why would you need it open while driving?
howhi50 said:
I use this: http://www.bracketron.com/products/universal-usb-power-dock
I got it from Radio Shack with a 1 year warranty just in case. I did have it break on me but that's because I wasn't using it right. I was within the 30 day return period so i returned it an got a new one. If you do get it make sure you press the red button when adjusting the angle. I would still recommend ti since it has everything I was looking for. I doubt you'll be able to have the keyboard open, but why would you need it open while driving?
Click to expand...
Click to collapse
I'm still searching for something similar. I like that one, I'm just worried about having the charging cable hanging out of it. The plug only needs to be a standard USB plug. I would imagine there would be another phone or device that would require something of this sort. Also, I don't need the keyboard open while using this.
cajunflavoredbob said:
I'm still searching for something similar. I like that one, I'm just worried about having the charging cable hanging out of it. The plug only needs to be a standard USB plug. I would imagine there would be another phone or device that would require something of this sort. Also, I don't need the keyboard open while using this.
Click to expand...
Click to collapse
Yea that's what I initially wanted when I set out my search but ended up settling for this. My apologizes on accusing you of wanting to use the keyboard while driving. After re-reading your op I didn't see that mentioned like I thought I did before. For charging my phone I use one of these pretty good quality and it comes with a micro usb adapter which i liked since a lot of newer phones are using this. Best wishes on your search!!
howhi50 said:
Yea that's what I initially wanted when I set out my search but ended up settling for this. My apologizes on accusing you of wanting to use the keyboard while driving. After re-reading your op I didn't see that mentioned like I thought I did before. For charging my phone I use one of these pretty good quality and it comes with a micro usb adapter which i liked since a lot of newer phones are using this. Best wishes on your search!!
Click to expand...
Click to collapse
Hmmmm..... That combined with the universal mount you posted might actually work nicely. I was concerned about my current HTC car charger as it has a rather long cord. This would likely eliminate that mess. I'll give it a shot. Thanks.
Anyone know where I could find a short miniUSB to USB cable. Something like 2" or so would be fine. This might be able to complete the homebrew mount I'm working on.
Short USB Cable
Amazon.com has a 1ft cable (can't post links yet) and 3 ft cables, although I haven't seen any 2ft cables. If you need 2ft you could pick up a gender changer (also available on amazon) and link two 1ft cables together.
kastg1 said:
Amazon.com has a 1ft cable (can't post links yet) and 3 ft cables, although I haven't seen any 2ft cables. If you need 2ft you could pick up a gender changer (also available on amazon) and link two 1ft cables together.
Click to expand...
Click to collapse
That's a 2" (inch) cable I am looking for. Thanks anyway, though. I'm hoping I won't have to make one. Making USB cables is not fun.
Just wondering has anyone tried/thought about the feasibility of modding a Palm Pre touchstone charger for use in an atrix? would it be extremely difficult to do so?
thantos said:
Just wondering has anyone tried/thought about the feasibility of modding a Palm Pre touchstone charger for use in an atrix? would it be extremely difficult to do so?
Click to expand...
Click to collapse
As per post on engadget it's not so complicated
thantos said:
Just wondering has anyone tried/thought about the feasibility of modding a Palm Pre touchstone charger for use in an atrix? would it be extremely difficult to do so?
Click to expand...
Click to collapse
xboxexpert posted a tutorial for this on a nook color here . Looks easy enough and the same method should apply.
Hmmm.. interesting.. only wished someone would have tried previously to know if it'd fit inside the battery cover...
After looking at the iFixIt teardown for the Atrix I'm not thinking this would be a straight forward process.
http://www.ifixit.com/Teardown/Motorola-Atrix-4G-Teardown/4964/2
Boards aren't my strong point but it looks as though the +/- may be under the usb connector housing.
mtnecho said:
After looking at the iFixIt teardown for the Atrix I'm not thinking this would be a straight forward process.
http://www.ifixit.com/Teardown/Motorola-Atrix-4G-Teardown/4964/2
Boards aren't my strong point but it looks as though the +/- may be under the usb connector housing.
Click to expand...
Click to collapse
Need a better shot, but it looks like you can still hit the resistor between the two ground posts. Going to need some thin wire though.
I am curious to know if anyone will attempt this.
vmiku914 said:
I am curious to know if anyone will attempt this.
Click to expand...
Click to collapse
Don't think I'm going to sacrifice my Atrix to the hardware mod gods. Enjoying it too much and not terribly interested in dropping the money to replace it if it doesn't work out.
I don't know if I will be doing the mod, but these are some of the tips I would follow if i decided to. If I do it I'll post pictures..
1st:
Be sure to use the Palm Pixi's back cover with the smaller circuit board - this one.
Click to expand...
Click to collapse
2nd:
You might wanna consider buying this case since its thicker and you can dig a little bit if the circuit doesn't fit the standard battery door.
Click to expand...
Click to collapse
3rd:
In many phones the metal that keeps the memory card in place is the ground (-).
Click to expand...
Click to collapse
4th:
I'm sure there's an easy (+) pin you can solder to - so far i haven't found one, but many people cut a usb plug to fit inside the usb female socket and route the cables somehow (Watch the first video below). You have to remove the cut usb in order to use it with computer, also its quite ugly. The best, but very hard way is to solder the (+) wire directly to where the usb socket is soldered to the phone's circuit board .This I'll leave to a jewelry craftsman, I know, with lots of experience. MAKE SHURE YOU KNOW WHICH PIN IS THE POSITIVE!!! For polarity of the palm pixi's circuit boat refer to the first picture.
Click to expand...
Click to collapse
I know its a bit difficult, but... that's the way it is.
Useful links:
Galaxy S Mod.
First HD2 Mod.
Same mod but with extended battery (Not good looking)
You have probably seen this.
A lot of people forget to do this.
YOU ARE WELCOME!!!
I bought some of the pixi components and will try this out without the requirement of soldering.. I've been thinking.. is there any way to use the leads from the battery as the connection point as opposed to soldering directly to the port? Or is there a voltage regulator that I'd have to go through first...
First, you should try if it's really charging Atrix (batt's percentage going up), because it needs more current than standart phone.
But i'm thinking of modyfing my own, but with less invasive method
I wouldn't take apart my atrix again. I may have killed my first one getting my screen out. Those ribbon cables are a pain, and well, you might not need to remove the flex cables (the black flat ones), but if you do, you are most times pulling up the temp sensor too, and that thing never goes back!!
Just make sure you are good at what you do
Why not solder the the inductive piece to a chunk of mini usb cable first ? Completely non invasive and you'll be able to prove it works before you solder to the phone.
That was what I was considering. Unfortunate that the variances for the attrix are so tight.
mobileweasel said:
Why not solder the the inductive piece to a chunk of mini usb cable first ? Completely non invasive and you'll be able to prove it works before you solder to the phone.
Click to expand...
Click to collapse
If you're going to do that, you may as well just buy one that's already made.
I meant to do that as proof of concept. If it charger, take it apart and hide it under the battery cover.
Does anyone tried the Palm inductive charger with Atrix? Does it really work?
I just got mine in - will try it soon.
Let me ask you guys this...
1) Whats the point of all this?
Really? What is the point? The cool form factor? Bragging rights? It seems like
a big inconvenience for me, especially when you will need to take your charger somewhere.
Anyways, seems like a lot of work for just the convenience of not plugging in a mini usb cable.
Anyways, good luck and I hope you guys have fun
Perhaps you are right about it.
But whats the point in buying a lapdock or media dock when you can just get a laptop? What's the point in rooting or unlocking your phone? You could easily just leave it stock and most of the functions will work just fine.
Call it a hobby or challenge or a convenience or whatever. I made this thread merely asking for technical help. Not snide commentary that is counter productive.
Just found this at amazon and it allows you to charge your S2 with a case on it..
http://www.amazon.com/Sinjimoru-Sta...VKH0/ref=sr_1_3?ie=UTF8&qid=1318089770&sr=8-3
Hmm that looks interesting. I wonder how stable it is.
There are some video reviews for it on youtube. It looks pretty stable...
That looks nicer than having tto take my phone out of the case to work with the infuse dock
Sent from my SAMSUNG-SGH-I777 using xda premium
want one.. in yellow or white.. xD
wish it had audio port
falcon26 said:
Just found this at amazon and it allows you to charge your S2 with a case on it..
http://www.amazon.com/Sinjimoru-Sta...VKH0/ref=sr_1_3?ie=UTF8&qid=1318089770&sr=8-3
Click to expand...
Click to collapse
Ya...I bought that dock and it's *crap*. Received it today at work and used it for about 1/3 of the day. My desk is completely flat and with the *slightest* tip (or even the headphone cord moving while plugged in) the entire thing rolls backwards. I had to push it up against one of my monitors to keep it upright. On top of it, the entire thing feels *really* cheap (like it could break at any moment) and the phone isn't even kept stationary on top of it. It relies on the cable connection to keep it upright...which is doesn't. The phone moves around without a problem.
Overall, not worth the money. I'll be sending it back tomorrow.
hotleadsingerguy said:
Ya...I bought that dock and it's *crap*. Received it today at work and used it for about 1/3 of the day. My desk is completely flat and with the *slightest* tip (or even the headphone cord moving while plugged in) the entire thing rolls backwards. I had to push it up against one of my monitors to keep it upright. On top of it, the entire thing feels *really* cheap (like it could break at any moment) and the phone isn't even kept stationary on top of it. It relies on the cable connection to keep it upright...which is doesn't. The phone moves around without a problem.
Overall, not worth the money. I'll be sending it back tomorrow.
Click to expand...
Click to collapse
Yikes! I just ordered one of these.
I'm finding that charging the phone in a case is a real problem unless I use the stock usb cord. I have a zillion other cables that work but not with a case. Not psyched about ordering more stock cables. I bet the official dock doesn't work with a case.
Any other solutions with extended connectors for use in a case??
I just got mine and it is not exactly what I expected but it does get the job done. I do not have any stability issues with it, I can actually tilt it backwards about 25 degrees with my phone on it before it falls backward, I do think it would benefit from some extra mass but with the phone on it I have not problem with it. I have the Ballistic case on mine and my problem was that the cable that came with this dock would not reach far enough into my device to make a connection because my case basically adds some depth to the port. I had two choices, either modify my case or the dock. What I ended up having to do was modify the cable that came with the dock with a longer micro usb port at the end so that it would make contact while on the base. Although I agree that this dock could be better, it does accomplish what I needed it to, just needed some help. I have a dock for every one of my devices, but this is the first one that lets me leave my case on.
BigBopper said:
Yikes! I just ordered one of these.
I'm finding that charging the phone in a case is a real problem unless I use the stock usb cord. I have a zillion other cables that work but not with a case. Not psyched about ordering more stock cables. I bet the official dock doesn't work with a case.
Any other solutions with extended connectors for use in a case??
Click to expand...
Click to collapse
For charging micro USB cables you could try to locate one of the ones for the nook color. Worked fine on my old captivate and works great on my new sgs2 even with the case on.
Sent from my SAMSUNG-SGH-I777 using xda premium
My gs2 fits in my infuse dock with my tpu case on like it was made for it!
sent from my gs2....War Eagle!
would it be possible to use the mhl adapter cable and turn this into a tv dock? i dont know if you could replace the larger usb cable that is included and swap it with the mhl one and have power to it and hdmi conencted at all times.
has anyone tried this who bought this item?
Do you think it's possible?
NotablyNice said:
Do you think it's possible?
Click to expand...
Click to collapse
I I think the easiest way is for a manufacturer to release a case like that that also included wireless charging capabilities. You're not going to be open up your OG and install the needed hardware yourself without serious modification, though.
EDIT: Actually, I take back what I said about not modifying the OG's hardware. http://lifehacker.com/5923977/mod-your-iphone-for-wireless-charging-no-bulky-case-required
Seems like if you have the will, it might be possible.
Yes it is possible...
I was able to put the coild and little magnets in the back of my phone case... so now it sticks to my touch stone... I have not soldered any wires to 5v or grnd on on the phone at all.. That is beyond by ability currently i will look into it. Looks like the nexus 4 has simple prongs already there (for the orb) but they did not include those prongs in the optimus g sprint or att. so either me or someone that is far more skilled will need to figure out where those points should connect to before doing so.
Sorry guys didnt take picture i was a little early to work this morning and did it at my desk before work started. took about 30min. (remember no wiring just simply put coild and magnets in my phone so it at least sticks to the touch stone in my car)
Akop87 said:
Yes it is possible...
I was able to put the coild and little magnets in the back of my phone case... so now it sticks to my touch stone... I have not soldered any wires to 5v or grnd on on the phone at all.. That is beyond by ability currently i will look into it. Looks like the nexus 4 has simple prongs already there (for the orb) but they did not include those prongs in the optimus g sprint or att. so either me or someone that is far more skilled will need to figure out where those points should connect to before doing so.
Sorry guys didnt take picture i was a little early to work this morning and did it at my desk before work started. took about 30min. (remember no wiring just simply put coild and magnets in my phone so it at least sticks to the touch stone in my car)
Click to expand...
Click to collapse
Yeah, they have done it on the N7, and several Samsung phones (much easier with removable backs). Not sure how the OG looks under the hood, but maybe someone could try.
Bump. anyone brave enough to see if the Samsung Note 2 or S4 Wireless charger pad's will fit in our phone? here sure would be sweet if it was as easy as opening it up and installing something like this