Hi,
I have used (installed) the Wizard love on my Qtek 9100 (O2 xda Mini s)
But now, when it starts up, it shows the wizard love splash screen, or image.
Is there a way to change it?
I would like to put back the O2 image. (i already found a O2 nfh file, but no tool to update it on my device)
can someone help ?
thanks.
stefke1974 said:
Hi,
I have used (installed) the Wizard love on my Qtek 9100 (O2 xda Mini s)
But now, when it starts up, it shows the wizard love splash screen, or image.
Is there a way to change it?
I would like to put back the O2 image. (i already found a O2 nfh file, but no tool to update it on my device)
can someone help ?
thanks.
Click to expand...
Click to collapse
here it is.....
download a new ROM (does not matter which one you pick) and then....
copy/paste O2 nfh file in the folder with the RUU.
... ok now "flash" and the screen should be there
Got it? if not, send pm
good luck°!!!!
i tryed that, but, still, it stays WizardLove
stefke1974 said:
i tryed that, but, still, it stays WizardLove
Click to expand...
Click to collapse
is your wizard HARDSPL? or softspl?
seems a little weird.....
LOL
anyway good luck!
i use hardspl
Try this one.
Thanks a lot IT WORKED
only, your update tool didn't work.
I just copy the file nk.nbf to my update tool, and now it is done, i have O2 splashscreen again.
Thanks a lot for your help.
By the way, is there a update tool working with Windows 7 ?
Related
I was flashing my brothers phone for him, and I was using the CID Workaround, and it completed, and then after a hard reset the device wouldnt go past the first splash screen.. pllease help
If your able to get into bootloader mode then you should be able to flash another rom such as wizard love or your providers rom.
If you read the thread on unlocking G4 cid locked using shell tool you will see what i mean. I personally was stuck in a very similar situation and received help, so the info you need might be in that thread.
nstefanelli said:
I was flashing my brothers phone for him, and I was using the CID Workaround, and it completed, and then after a hard reset the device wouldnt go past the first splash screen.. pllease help
Click to expand...
Click to collapse
Check your PM's
bwesty said:
If your able to get into bootloader mode then you should be able to flash another rom such as wizard love or your providers rom.
If you read the thread on unlocking G4 cid locked using shell tool you will see what i mean. I personally was stuck in a very similar situation and received help, so the info you need might be in that thread.
Click to expand...
Click to collapse
i used the shell tool, but i just got stuck on the first splash after i did that.... here are device specs
Its a Cingular 8125, obivously g4
IPL 2.25.0001
SPL 2.25.0001
It doesnt get past bootloader, and I would really like to put WM6 on it.
At this point, I've tried various other ROMs and nothing is working. Any thoughts or ideas at all would be appreciated. Thanks.
jUST DO WHAT I SAY
gREETINGS,
Just follow this steps u will be out of it.
Press and hold the camera button and reset the phone, hold the camera button until you see the tri color screen (bootloader), when u are on tri color screen connect the USB with your phone(dont see for active sync it wont recognise but it will be connected), and then flash your phone with the rom your provider has given you i.e, the original rom and DONT flash it with shell tool use the exe file of the rom.
When you are at the original rom then try to flash the WM6 with shell tool and follow the instruction properly.
Thanks
samy.3660 said:
gREETINGS,
Just follow this steps u will be out of it.
Press and hold the camera button and reset the phone, hold the camera button until you see the tri color screen (bootloader), when u are on tri color screen connect the USB with your phone(dont see for active sync it wont recognise but it will be connected), and then flash your phone with the rom your provider has given you i.e, the original rom and DONT flash it with shell tool use the exe file of the rom.
When you are at the original rom then try to flash the WM6 with shell tool and follow the instruction properly.
Thanks
Click to expand...
Click to collapse
I cannot do that because the Carrier ROMs that I have aren't for G4, so they arent working. I have three different carrier ROMs for my phone.. and none of them work.
-Stefanelli-
nstefanelli said:
i used the shell tool, but i just got stuck on the first splash after i did that.... here are device specs
Its a Cingular 8125, obivously g4
IPL 2.25.0001
SPL 2.25.0001
It doesnt get past bootloader, and I would really like to put WM6 on it.
At this point, I've tried various other ROMs and nothing is working. Any thoughts or ideas at all would be appreciated. Thanks.
Click to expand...
Click to collapse
Check your email, I downloaded and zip works fine here.
i'm facing this problem right now , i will solve it with the original rom .
the problem started when i used shelltool to upgrade my G4 CID Locked to windows mobile 6 crossbow underground edition .
i will give it another try when i get my device alive again ,
any suggestions for the WM6 underground to make it work using shelltool on my wiza 200 ??
--------------------- Edit -----------------------
Finally i solved the problem and installed Crossbow WM6 underground edition .
all i did is to install the original rom from provider and then used shelltool to install WM6 .
i want to mention that my wiza200 is G4 and its CID Locked .
Huge thanx to mUn , you are da man
Mmm
I've tried underground wm6, but flashing till 96%, then error 302. I've searching for love rom few hours at night, then finally found, it is using the same flashing frontend (but in italian? language), flashed ok, phone's running. I've tried some few other wm6 roms, but always errors like "too old, get new one" or once it was probably fake, because it loaded exactly the same ROM as love one is. So, now I've probably stuck on WM5 at all
lobiik said:
I've tried underground wm6, but flashing till 96%, then error 302. I've searching for love rom few hours at night, then finally found, it is using the same flashing frontend (but in italian? language), flashed ok, phone's running. I've tried some few other wm6 roms, but always errors like "too old, get new one" or once it was probably fake, because it loaded exactly the same ROM as love one is. So, now I've probably stuck on WM5 at all
Click to expand...
Click to collapse
whats your device and is it G3 or G4 ?
try to do as i did and it worked for me , install the provider flash , then try shelltool to flash WM6 underground .
WBR
a-h-t1 said:
whats your device and is it G3 or G4 ?
Click to expand...
Click to collapse
Mine is G4, dunno if cid is locked or not. I've flashed it as I said with wizard love rom and working without problems. I've tried that again this morning, to flash from love rom, but the same. At 96% it hangs, error 302 Communication error, then starts recovery process, phone goes to bootloader mode. Then is possible to flash it with love rom again with no problem
g4
i have a g4 wizard using the shell tool i have chaged my rom on my phone sometimes 3 times a week just to test them out
the shell tool works if you cant download from the forum here is the link for it
http://rapidshare.com/files/17787647/ShellTool_bugfixed.zip
G4
yes, but when I run shelltool, and press get rom info, all fields states N/A
info from phone is:
ROM Version: 2.26.10.2 WWE
Radio: 2.25.11
ExtROM: 2.26.10.105
IPL/SPL: 2.17.0001
And anyway, dunno exactly which rom for WM6 I can put in (I've just 5.underground_edition_Crossbow_ROM.exe which stucks at 96% with 302 error)
well, I'm dumb, mislooked one stupid thing. Everything passed without errors, Windows Mobile 6 is up and running
happy to know that , the problem was installing rapi ha ??
WBR
No, not really, rapi and that second cab was in device, it was restarted, but I did a mistake - i didn't copied that desired rom into updater directory - that was why were all fields N/A... did that, flashed on first try, without problem
I had the same problem, orginal rom from the provider, and I can reflash it again.....
THX for the info......
ROM verion and link location
Hi lobiik,
which ROM did you use for your device, as you comments above:
"i didn't copied that desired rom into updater directory "
can you please point me to location where i can get the ROM, also proper steps to install the same.
Thanks,
Ajay
HELP!!!!!!!!
I tried flash my G3 with shelltools the program said it worked well i did hard reset then i turned it on it is stuck on 1st front screen bootloader mode is stuck i dont know what is is my device bricked
---------------------edit--------------------------
im a newbie
to get out of it, is very simple... remove your minisd then press "ok"+"power"+"reset"
it should work unless u damaged your spl. if you damaged you spl, copy original one from RUU_Athena.... and rename it to ATHEIMG.NBH then copy it to you sd, then press "ok"+"power"+"reset"
i'm not sure it all will work for everybody, but thats what i tried and it did work for me...
good luck playing with your athena, but be careful
it should work unless u damaged your spl. if you damaged you spl, copy
original one from RUU_Athena.... and rename it to ATHEIMG.NBH then copy it
to you sd, then press "ok"+"power"+"reset"
Click to expand...
Click to collapse
I tried this and still in white screen(after change from Spanish to English and disconnect error occurred).
Hi,
i have a uk ameo from tmobile, will it work if i take the nbh from htc wwe version ?
My case in detailes...
I have original HTC Advantage 7500 not branded with Spanish windows . After tried to update with English RUU my htc Advantage stuck in 3 colors boot-loader mode. Any resets(soft, hard, boot-loader) not help.
Than I find this suggestion here I tried it and it help:
I think you are not stuck in bootloader, I think you are stuck in the Flash
ROM utility which has colors and not just the Dopod logo with a black scree.
If this is the case, here it is what I did to solve this:
I downloaded ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32.
00.10_108_ship, which you already did.
Decompiled the RUU_signed.nbh contained inside
ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32. 00.10_108_ship with
dutty's good NBH tool found at: http://forum.xda-
developers.com/showthread.php?t=296316 then I created a new RUU_signed.nbh
with the same files but it didn't allowed me to insert some items like the
SIRFBootLoader.nb and some others, so I started executed the
ROMUpdateUtility.exe again and it stopped again at 1% but with a different
error "Corrupted ROM Image" and suddenly! My device was taken out of the
Flash Utility to see the bootloader screen again! Wow! What a relief!
Click to expand...
Click to collapse
this is done!
after my Spanish OS reloaded and I can to do ActiveSync with PC - Than I find this suggestion in this thread and I tried it and after 5 min connecting error occurred . After hard resetting after this "update", after the HTC boot screen I just get a white screen. The HTC does make a sound as if it's working and BT and WiFi leds blink. When device connected to PC the HTC does make a sound as if it's working, but the ActiveSync in PC write that can't to connect to mobile device. And I just can't see anything.
Now I can't find Spanish HTC Advantage 7500 not branded RUU in all World.
Any ideas.
I succeeded with mine
Thank you. I was wondering whether I had actually bricked my athena, but then your tip helped me out....
Ken_xda said:
Thank you. I was wondering whether I had actually bricked my athena, but then your tip helped me out....
Click to expand...
Click to collapse
Good Tipps ! LOVE THEM !
thanks for help !
Any solution to this one? I want to have the Dopod splash screen instead of the cloudy Qtek version. Is it possible?
im havin d same prob too...need to switch back from QTEK to DOPOD screen
READ ~~~~~
I hope that somebody can help
matthewchng said:
Any solution to this one? I want to have the Dopod splash screen instead of the cloudy Qtek version. Is it possible?
Click to expand...
Click to collapse
ok,u can change it but u must do some steps.
1/back up your data
2/download a origin rom from your PDA's website
3/flash it with this rom(don't extract this file,use *.exe)
4/flash it again with a rom,hard SPL,radio those u R using
5/restore your data
your splash screen will be change.i did it.my XDA neo splash was changed from O2 origin to O2 race (BMW)
What happened?
Probably you used a WM5.NVID RUU to prepare your device (Step1) for flashing another ROM.
The two startup screens (we call them splashscreens) are some specific picture-files that CAN be installed when a RUU is executed. The upgrade RUU's you find here don't bother with that, but the official vendors are very eager to have their own logo on yor device, so their RUU's contain a splashscreen section in the RUU. It does nothing more then change the startup picture.
So if you want to change back, it will only be cosmetic, there are no software changes whatsoever.
In this forumsection, there is a thread that offers a splashscreen-changer. So, if you can find the original dopod picture files, you can use that tool to chage only the startupscreens. If you have the original Dopod RUU, you could extract the splash-file.
thanks .. will find d splashscreen changer now...
If I rember correctly, user named Lastnikita develloped it. I think he posted in the general section as well.
matthewchng said:
Any solution to this one? I want to have the Dopod splash screen instead of the cloudy Qtek version. Is it possible?
Click to expand...
Click to collapse
1- extract nk.nbf from the ROM contains the splash you want using this tool and this command
Code:
typho5 nk.nbf -x
2- now use the tool nb2nbf like this:
Model ID: PM300
Language: WWE
oem version: leave blank
operator version: leave blank
CID: delte it, leave blank
only the file 92000000-Splash.nb and delete others like this: write or chose exatly like this
files 1: 92000000-Splash.nb, choose Splash Screen from image name the start address will become 92000000
3- press translate
4- flash the new nk.nbf with the NVID_Gx
cant seem to download from the link u've given..there's an error..
can pls give another link?
anyway does anyone has original DOPOD splash screen ??pls post thanks
d4rkfun3ral said:
cant seem to download from the link u've given..there's an error..
can pls give another link?
anyway does anyone has original DOPOD splash screen ??pls post thanks
Click to expand...
Click to collapse
Oh yes please. If anyone has it, please do share. If not, can someone who has the latest Official ROM for 818Pro, please upload to rapidshare. I can't get to the ROM download section because the HTC registration page don't seem to accept my device's serial number.
Thanks in advance.
the links work to me
download the latest Official ROM for 818Pro from dopod site, I have only I-mate and qtek splash
hope to say welcome in advance
Can someone try to extract the one from the following link that I found online that works. No idea if it is the latest version. I'm not at home now so haven't got access to my machine to try on this. Hope to hear the good news.
http://www.dopodasia.com/download/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
dahdout said:
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
Click to expand...
Click to collapse
What IPL/SPL it displays now ? ,Does it get into Bootloaders ? if it still does than download and flash 'wizard_love_rom' hope it'll recover back.
RE:
It just boots into a white screen. If i hold the camera and power buttons together it boots into bootloader mode, and says USB in the bottom corner. (when i am conncected via usb) but the problem is that active sync doesnt recognize it in bootloader mode. I have tried flashing it in many different ways and i have had no success.
When i go home i will try wizard_love_rom.
and as for the IPL/SPL, i will also check that when i get home.
Where can i download the wizard_love_rom?
Thanks for the help !
RE:2
Hello,
Mr IPL and SPL are both 2.25.0001
My GSM: 02.25.11
My OS: 2.18.0.0
Good News
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
dahdout said:
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
Click to expand...
Click to collapse
Glade its working again !
You got a G4 device,it cannot be CID unlocked,but however,it can be upgraded to wm6 or 6.1,read the methods 'HardSPL' or 'SoftSPL' posted as stickies in the G4 forum for upgrading to wm6 or 6.1.
re:3
thanks, you really saved me with your help!
dahdout said:
thanks, you really saved me with your help!
Click to expand...
Click to collapse
Thanks !
Glade you got it working
sorry, but i need help... again
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
dahdout said:
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
Click to expand...
Click to collapse
ok,for error (300)you can use the RUU MUNS already posted in the 'HardSPL' thread,download the RUU_MUNS application extract it to a folder and copy and paste all the files of this extracted to the folder of the Rom replacing all the RUU files in that folder or copy the nk.nbf folder in the Rom to the extracted folder of the RUU_MUNS and then run the RUU,it will start to flash and complete and hopefully fully boot up.
For edge or gprs,you'll have to get network settings of your network carrier or check out the thread from where you downloaded the rom,its uaually posted there or check out the 'Network' thread.
Aquestion to Zabardast_1 ?
294 error , invalid vender ID
what does that means & asolution to it during rom update
ERROR [294] : INVALID VENDER ID
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
hi, i am new to this. so i have an o2 xda mini s. it is a g4 device. and i tried to flash a CR96 THD v6.5.0.3.2 beta . and i used SoftSPL to do it. but now after flashing, it gets stuck at bootloader screen. i guess the os wasnt loaded properly.
problem is, before flashing the new ROM, soft SPL said i had to install two files in my xda. i did.EnableRapi and Cert_SPCS . and after i had to connect my xda to computer and click on soft-spl start program. (this one uses some dll file, p2x588.dll, which wasnt extracted properly). so wen i clicked on soft-sp start.exe , a small console window open and closed immediately on my computer. since this was the first time i didnt know how it works, i thought that was how to do it. but since i found no change in my xda, i put it in bootloder mode by pressing camera button and flashed CR96 THD v6.5.0.3. ( i took the nk.nfb file and put in soft-spl folder and run RUU which was available in SOFTSPL folder. and my xda completed the flashing. but after flashing,now it goes to bootloader screen only. i think the flashing didnt work. but now my IPL/SPL is changed to 2.25.0001, it was 2.21.001 earlier. also during flashin i forgot to turn off the radio, i did remove the sd card. since new IPL/SPL is 2.25, i cant flash original o2 xda mini s rom. it says use a newer nk.nbf file.
Now i dont know wht to do. i tried to download wizard love rom, but its nt getting downloaded. always gets inturrupted. if anyone hav wizard love rom, pls send it to my mail, .also i dont think my phone is CID unlocked. can anyone help me and save my phone. pls .pls
solved...........................
i also have an xda mini s and i need help with adding 6.5, its G4 because the ipl and spl are 1.21.4.0001 please help!
tomtom316 said:
i also have an xda mini s and i need help with adding 6.5, its G4 because the ipl and spl are 1.21.4.0001 please help!
Click to expand...
Click to collapse
you can get MSD-Wizard-WM6.5-23 085 for the G3 or G4 in http://www.mediafire.com/?3tmtt4izann
flash a new roM
hi,,,
i have htc k JAM.....but i have problem,,when i start ma k jam it stuck on staring screen,,,,i show's
IPL 2.21.0001
spl 2.21.olip
gsm 02.19.11
os 2.26.10.2
so how can i flash my mobil's rom,,,plss help me,,,,
Hakim Rahman said:
you can get MSD-Wizard-WM6.5-23 085 for the G3 or G4 in http://www.mediafire.com/?3tmtt4izann
Click to expand...
Click to collapse
I am downloading it now, i have downloaded many ROMS and tried to install them but every time my device is still version 5.0, in the RUU it says. update from 1.2.0.0(near that) then it says update to: (blank).
and also i think its something to do with flashing could you explain what flashing is? thanks
how to update rom to wm6.5 o2 xda mini s How to install on the phone
Hi,
i wanted to update my o2 xda mini s from wm5 to wm 6.5 g4 device
i have downloaded MSD-Wizard-WM6.5-23085.rar
but i dont know how to flash it to the phone (nk.nbf) how to install it to phone?
i am stuck on the boot loader mode now how do i install it on to the phone?
do i need another software or extractor for this nk.nbf file?
please help.
i am using windows vista 32 bit and updated windows mobile device center and its drivers usbas,rar i found on the post on forum.xda
Thanks