hi, i am new to this. so i have an o2 xda mini s. it is a g4 device. and i tried to flash a CR96 THD v6.5.0.3.2 beta . and i used SoftSPL to do it. but now after flashing, it gets stuck at bootloader screen. i guess the os wasnt loaded properly.
problem is, before flashing the new ROM, soft SPL said i had to install two files in my xda. i did.EnableRapi and Cert_SPCS . and after i had to connect my xda to computer and click on soft-spl start program. (this one uses some dll file, p2x588.dll, which wasnt extracted properly). so wen i clicked on soft-sp start.exe , a small console window open and closed immediately on my computer. since this was the first time i didnt know how it works, i thought that was how to do it. but since i found no change in my xda, i put it in bootloder mode by pressing camera button and flashed CR96 THD v6.5.0.3. ( i took the nk.nfb file and put in soft-spl folder and run RUU which was available in SOFTSPL folder. and my xda completed the flashing. but after flashing,now it goes to bootloader screen only. i think the flashing didnt work. but now my IPL/SPL is changed to 2.25.0001, it was 2.21.001 earlier. also during flashin i forgot to turn off the radio, i did remove the sd card. since new IPL/SPL is 2.25, i cant flash original o2 xda mini s rom. it says use a newer nk.nbf file.
Now i dont know wht to do. i tried to download wizard love rom, but its nt getting downloaded. always gets inturrupted. if anyone hav wizard love rom, pls send it to my mail, .also i dont think my phone is CID unlocked. can anyone help me and save my phone. pls .pls
solved...........................
i also have an xda mini s and i need help with adding 6.5, its G4 because the ipl and spl are 1.21.4.0001 please help!
tomtom316 said:
i also have an xda mini s and i need help with adding 6.5, its G4 because the ipl and spl are 1.21.4.0001 please help!
Click to expand...
Click to collapse
you can get MSD-Wizard-WM6.5-23 085 for the G3 or G4 in http://www.mediafire.com/?3tmtt4izann
flash a new roM
hi,,,
i have htc k JAM.....but i have problem,,when i start ma k jam it stuck on staring screen,,,,i show's
IPL 2.21.0001
spl 2.21.olip
gsm 02.19.11
os 2.26.10.2
so how can i flash my mobil's rom,,,plss help me,,,,
Hakim Rahman said:
you can get MSD-Wizard-WM6.5-23 085 for the G3 or G4 in http://www.mediafire.com/?3tmtt4izann
Click to expand...
Click to collapse
I am downloading it now, i have downloaded many ROMS and tried to install them but every time my device is still version 5.0, in the RUU it says. update from 1.2.0.0(near that) then it says update to: (blank).
and also i think its something to do with flashing could you explain what flashing is? thanks
how to update rom to wm6.5 o2 xda mini s How to install on the phone
Hi,
i wanted to update my o2 xda mini s from wm5 to wm 6.5 g4 device
i have downloaded MSD-Wizard-WM6.5-23085.rar
but i dont know how to flash it to the phone (nk.nbf) how to install it to phone?
i am stuck on the boot loader mode now how do i install it on to the phone?
do i need another software or extractor for this nk.nbf file?
please help.
i am using windows vista 32 bit and updated windows mobile device center and its drivers usbas,rar i found on the post on forum.xda
Thanks
Related
I was flashing my brothers phone for him, and I was using the CID Workaround, and it completed, and then after a hard reset the device wouldnt go past the first splash screen.. pllease help
If your able to get into bootloader mode then you should be able to flash another rom such as wizard love or your providers rom.
If you read the thread on unlocking G4 cid locked using shell tool you will see what i mean. I personally was stuck in a very similar situation and received help, so the info you need might be in that thread.
nstefanelli said:
I was flashing my brothers phone for him, and I was using the CID Workaround, and it completed, and then after a hard reset the device wouldnt go past the first splash screen.. pllease help
Click to expand...
Click to collapse
Check your PM's
bwesty said:
If your able to get into bootloader mode then you should be able to flash another rom such as wizard love or your providers rom.
If you read the thread on unlocking G4 cid locked using shell tool you will see what i mean. I personally was stuck in a very similar situation and received help, so the info you need might be in that thread.
Click to expand...
Click to collapse
i used the shell tool, but i just got stuck on the first splash after i did that.... here are device specs
Its a Cingular 8125, obivously g4
IPL 2.25.0001
SPL 2.25.0001
It doesnt get past bootloader, and I would really like to put WM6 on it.
At this point, I've tried various other ROMs and nothing is working. Any thoughts or ideas at all would be appreciated. Thanks.
jUST DO WHAT I SAY
gREETINGS,
Just follow this steps u will be out of it.
Press and hold the camera button and reset the phone, hold the camera button until you see the tri color screen (bootloader), when u are on tri color screen connect the USB with your phone(dont see for active sync it wont recognise but it will be connected), and then flash your phone with the rom your provider has given you i.e, the original rom and DONT flash it with shell tool use the exe file of the rom.
When you are at the original rom then try to flash the WM6 with shell tool and follow the instruction properly.
Thanks
samy.3660 said:
gREETINGS,
Just follow this steps u will be out of it.
Press and hold the camera button and reset the phone, hold the camera button until you see the tri color screen (bootloader), when u are on tri color screen connect the USB with your phone(dont see for active sync it wont recognise but it will be connected), and then flash your phone with the rom your provider has given you i.e, the original rom and DONT flash it with shell tool use the exe file of the rom.
When you are at the original rom then try to flash the WM6 with shell tool and follow the instruction properly.
Thanks
Click to expand...
Click to collapse
I cannot do that because the Carrier ROMs that I have aren't for G4, so they arent working. I have three different carrier ROMs for my phone.. and none of them work.
-Stefanelli-
nstefanelli said:
i used the shell tool, but i just got stuck on the first splash after i did that.... here are device specs
Its a Cingular 8125, obivously g4
IPL 2.25.0001
SPL 2.25.0001
It doesnt get past bootloader, and I would really like to put WM6 on it.
At this point, I've tried various other ROMs and nothing is working. Any thoughts or ideas at all would be appreciated. Thanks.
Click to expand...
Click to collapse
Check your email, I downloaded and zip works fine here.
i'm facing this problem right now , i will solve it with the original rom .
the problem started when i used shelltool to upgrade my G4 CID Locked to windows mobile 6 crossbow underground edition .
i will give it another try when i get my device alive again ,
any suggestions for the WM6 underground to make it work using shelltool on my wiza 200 ??
--------------------- Edit -----------------------
Finally i solved the problem and installed Crossbow WM6 underground edition .
all i did is to install the original rom from provider and then used shelltool to install WM6 .
i want to mention that my wiza200 is G4 and its CID Locked .
Huge thanx to mUn , you are da man
Mmm
I've tried underground wm6, but flashing till 96%, then error 302. I've searching for love rom few hours at night, then finally found, it is using the same flashing frontend (but in italian? language), flashed ok, phone's running. I've tried some few other wm6 roms, but always errors like "too old, get new one" or once it was probably fake, because it loaded exactly the same ROM as love one is. So, now I've probably stuck on WM5 at all
lobiik said:
I've tried underground wm6, but flashing till 96%, then error 302. I've searching for love rom few hours at night, then finally found, it is using the same flashing frontend (but in italian? language), flashed ok, phone's running. I've tried some few other wm6 roms, but always errors like "too old, get new one" or once it was probably fake, because it loaded exactly the same ROM as love one is. So, now I've probably stuck on WM5 at all
Click to expand...
Click to collapse
whats your device and is it G3 or G4 ?
try to do as i did and it worked for me , install the provider flash , then try shelltool to flash WM6 underground .
WBR
a-h-t1 said:
whats your device and is it G3 or G4 ?
Click to expand...
Click to collapse
Mine is G4, dunno if cid is locked or not. I've flashed it as I said with wizard love rom and working without problems. I've tried that again this morning, to flash from love rom, but the same. At 96% it hangs, error 302 Communication error, then starts recovery process, phone goes to bootloader mode. Then is possible to flash it with love rom again with no problem
g4
i have a g4 wizard using the shell tool i have chaged my rom on my phone sometimes 3 times a week just to test them out
the shell tool works if you cant download from the forum here is the link for it
http://rapidshare.com/files/17787647/ShellTool_bugfixed.zip
G4
yes, but when I run shelltool, and press get rom info, all fields states N/A
info from phone is:
ROM Version: 2.26.10.2 WWE
Radio: 2.25.11
ExtROM: 2.26.10.105
IPL/SPL: 2.17.0001
And anyway, dunno exactly which rom for WM6 I can put in (I've just 5.underground_edition_Crossbow_ROM.exe which stucks at 96% with 302 error)
well, I'm dumb, mislooked one stupid thing. Everything passed without errors, Windows Mobile 6 is up and running
happy to know that , the problem was installing rapi ha ??
WBR
No, not really, rapi and that second cab was in device, it was restarted, but I did a mistake - i didn't copied that desired rom into updater directory - that was why were all fields N/A... did that, flashed on first try, without problem
I had the same problem, orginal rom from the provider, and I can reflash it again.....
THX for the info......
ROM verion and link location
Hi lobiik,
which ROM did you use for your device, as you comments above:
"i didn't copied that desired rom into updater directory "
can you please point me to location where i can get the ROM, also proper steps to install the same.
Thanks,
Ajay
HELP!!!!!!!!
I tried flash my G3 with shelltools the program said it worked well i did hard reset then i turned it on it is stuck on 1st front screen bootloader mode is stuck i dont know what is is my device bricked
---------------------edit--------------------------
im a newbie
i saw lot of people have dead prophet problem, so i am here now to make a new thread to all this people and i hope to make it useful.
now we start
** FIRST : lets know names of prophet :
I mate Jamin, O2 XDA Neo, Qtek S200, Dopod 818 pro, Dopod 830, SPV M600, VPA Compact S.
** SECOND : we must know that before we trying to do any updating or change roms on my prophet i just need to do which called unlock for the prophet and then we after that been able to change any rom on my ( jamin ) and of course u need to be careful about Your device is it G4 or G3 ,
# and how we know its G4 Or G3 ?
# when u start Your Device u will see some numbers on left,
---------------------
IPL: 1.00.000
SPL: 2.20.000
GSM: 02.61.21
OS: 3.0.0.0
--------------------
and may be changed and that goes to the rom which You have, now we look for the last number on ( IPL and SPL ) , if we found it ( 0 ) it means You r G3 and if it ( 1 ) so You r G4 .
** THIRD : lets go to unlock , i will put programs in this thread it will help u in unlock.
-- Sync your device with computer and open the file u download it called HardSpl you will find two files one one foe G3 and G4 open your kind then you'll find a file called (( hardspl.bat )) okay, be sure your device is connected to computer then open the file and follow instruction and it will reset your device ,
now u ready to change rom.
TO BE CONTINUED
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
if any one can help please contact me.
hello
my device is jamin g4
it stopsat the boot loader and dono thing
can u help me please?
my e-mail is [email protected]
and suddenly after trying to update the spl been 1.01
please help me
can i fix it?
waiting for ur help
What is the IPL and SPL?
If the wiki where up, I'd suggest looking at that, but as it is I'll explain it now...
What ROM where you attempting to upgrade to?
To get the device back, I would say "Read the wiki" but it's down!!!
Download this ROM.
In ActiveSync, disable "connect through USB" (File->Connection Settings).
Put the device into bootloader (the three coloured screen) and connect it to the computer using the USB cable.
Run the file you downloaded earlier. This should then install a new ROM.
From there, just wait for it to finish.
Now, it should work!
From there, you could re install the Orange WM5 ROM, or try upgrading to WM6. Make sure you read all the relevant guides first!
thanks alot i did as u said but it stops at 80% or 88%
then show this message (error 326 invalid command )
please help me
i'm feeling bad
my mail is [email protected]
What brand the device? Has it been SIM unlocked?
hi again brothers, pal zerocool. first u must unlock ur device to be able to accept any rom after that and solve pproblems.
first flash this rom its offecial and it solve dead prophet problems.
then make hard spl by program open file called hardspl.bat.
make hard reset.
flash ur rom u want.
make hard reset again.
then enjoy.
i uploaded the hardspl program but i couldnt upload the rom its so big so u can look in ur mail u will find the solution.
u can extract file by any program for zip.and tell me the news
dont forget to look to ur mail. see all of u later
Dead prophet
Hi guys,
I have been using a sh... Nokia sine I broke my prophet G4 in december by upgrading the OS.
I had downgraded first to NVID and then I tried to upgrade and it fails at 95%.
Sine this day, my prophet seem totally dead, no light when plug on both charger or computer, windows do not recognize at all the device because it is turned off. And it really do not seem to charge...
I am living in China now and a guy told me I had to change the PB board...The ost is 100Euros, but I am almost sure I an find another solution...
The weird thing is I cannot charge it at all ( I mean no lights but does it charge a little?).
The guy tested my prophet with another battery and in that ase, it is stuck on the bootloader.
We tried several roms and it always fails at 95% and the error is 200 something, maybe 245 or 243, I do not remember sorry...
Is my phone hardware is dead? or it is just a software problem and I did not see the right guy?
Do I need to buy a new battery? I have read that sometimes the device is not able to recognize it even if it the offiial one and even if it is working on another device...
PLease help me I don't want to loose this phone that I've been using for almost 3 years...
Otherwise I will switch to an iphone but I am not sure to be as happy than I was with my prophet.
Xie Xie for your advice and answers.
Guilh1
Can it enter bootloader at all?
If yes, what are the IPL and SPL?
If not, it will be a hardware problem (may just be connectors to the battery but may be something more).
the only way of recovery is using jtag
but 1st we must discover the location of jtag pins on motherboard
I just do not know because with my actual battery, anything is possible....
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
I may be right about the battery onnectors though, but the problems seem to be from the phone connectors or the battery it self???
Thank you anyway for your very quick reply
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
Click to expand...
Click to collapse
If it can enter bootloader, it is almost certainly your battery at fault!
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/B] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
Click to expand...
Click to collapse
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/b] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Click to expand...
Click to collapse
Please look at this if you want more help, post here...
thanks alot dear samuraititio
but i can't flash it
it writes (no vender id)
help me please i tried another tool with the same nbf file it stops at 80%
and it automatically enter the boot loader
and i can't do ant thing
its information
jamin/g4
ipl 2.13.0001
spl 1.01
i think my problem is in the spl coz it was 2.13.0001
and now it's 1.01
how can i fix it please i still starter in this way so i'm trying;
help soon please
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
l3v5y said:
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
Please look at this if you want more help, post here...
Click to expand...
Click to collapse
hello pal i3v5y
i have the same problem
idid what u said the flashing stops at 80%
i need ur help please
i'm online at the moment and u too help me soon if u can please
my e-mail is [email protected]
waiting for u i don't have any other device to use and i need it
l3v5y said:
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
Click to expand...
Click to collapse
now i flashed the official rom of jamin but it stopped at 80%
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
dahdout said:
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
Click to expand...
Click to collapse
What IPL/SPL it displays now ? ,Does it get into Bootloaders ? if it still does than download and flash 'wizard_love_rom' hope it'll recover back.
RE:
It just boots into a white screen. If i hold the camera and power buttons together it boots into bootloader mode, and says USB in the bottom corner. (when i am conncected via usb) but the problem is that active sync doesnt recognize it in bootloader mode. I have tried flashing it in many different ways and i have had no success.
When i go home i will try wizard_love_rom.
and as for the IPL/SPL, i will also check that when i get home.
Where can i download the wizard_love_rom?
Thanks for the help !
RE:2
Hello,
Mr IPL and SPL are both 2.25.0001
My GSM: 02.25.11
My OS: 2.18.0.0
Good News
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
dahdout said:
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
Click to expand...
Click to collapse
Glade its working again !
You got a G4 device,it cannot be CID unlocked,but however,it can be upgraded to wm6 or 6.1,read the methods 'HardSPL' or 'SoftSPL' posted as stickies in the G4 forum for upgrading to wm6 or 6.1.
re:3
thanks, you really saved me with your help!
dahdout said:
thanks, you really saved me with your help!
Click to expand...
Click to collapse
Thanks !
Glade you got it working
sorry, but i need help... again
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
dahdout said:
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
Click to expand...
Click to collapse
ok,for error (300)you can use the RUU MUNS already posted in the 'HardSPL' thread,download the RUU_MUNS application extract it to a folder and copy and paste all the files of this extracted to the folder of the Rom replacing all the RUU files in that folder or copy the nk.nbf folder in the Rom to the extracted folder of the RUU_MUNS and then run the RUU,it will start to flash and complete and hopefully fully boot up.
For edge or gprs,you'll have to get network settings of your network carrier or check out the thread from where you downloaded the rom,its uaually posted there or check out the 'Network' thread.
Aquestion to Zabardast_1 ?
294 error , invalid vender ID
what does that means & asolution to it during rom update
ERROR [294] : INVALID VENDER ID
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
Yesterday i want flash my device to wm6. actualy I have g3 device, and my spl stil lates rom from packaging. Mayby i chose the wrong sspl from this forum. i just flash sspl for G4 model. and now my device stuck in bootloader and my spl become 2.G4.4pda, but the screen still detec the "usb", i already try to flash many official rom (wm5). but usb allways connetcion error.. what should i do? please help me.. still i can use my prophet or not? thx alot
You must flash with a wm5 rom to live your prophet.
You can find the no vendor official VM5 ROM here:
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
and download:
RUU_Prophet_220734_2207114_024721_NVID
Do the steps described in the first post in the following thread:
http://forum.xda-developers.com/showthread.php?t=353547
Check especially 8 steps beginning with "Please ask yourself... 1. did I soft reset....."
Once i was stuck at the tree-color screen, everything was ok but i coudn't establish the connection by RUU and i tried to restart my pc, that didn't help, but i shut it down completely and start again, it worked. Please try..
Use hardspl for G3, not for G4! If there are separate RUUs for G3 and G4 any time, absolutly flash with the one for G3!
Good luck!
krenzz said:
Yesterday i want flash my device to wm6. actualy I have g3 device, and my spl stil lates rom from packaging. Mayby i chose the wrong sspl from this forum. i just flash sspl for G4 model. and now my device stuck in bootloader and my spl become 2.G4.4pda, but the screen still detec the "usb", i already try to flash many official rom (wm5). but usb allways connetcion error.. what should i do? please help me.. still i can use my prophet or not? thx alot
Click to expand...
Click to collapse
If you've flashed a G4 SPL onto a G3 device, it's probably terminal...
Help please!
I have an T-Mobile Ameo (also known Athena X7500) and i tried the Olipro Unlocker, but the installation didnt finish, at 59% stopped. After that i turn off the device, then turn on, but my device still have a 4 colour screen,red, green, blue and white, it doesnt boot the Windows Mobile, just have the installation screen...
please help
Use olipro's tool again and then flash your final ROM
i tried it many times, but since than my Athena X7500 was dead, the Olipros unlocker doesnt work. The program said: "The Update Utility cannot connect your PDA phone"
In bootloader (coloured screen), does it say anything? if so what? when you try to flash a rom or use unlocker do you get a code? is your memory card out of the slot?
I took a photo my bootloader (coloured) screen:
http://kepfeltoltes.pirateclub.hu/pics/20090106317.jpg My device doesnt say anything.
When i used the unlocker, i didnt got any code. And my memory card was in the slot.
I also took a photo what the Olipro's said now, if i try to continous the flashing:
http://kepfeltoltes.pirateclub.hu/pics/20090106319.jpg
Have you tried flashing your carrier's original Rom?
i will try it, but i dont know where can i find my original rom...
and my second biggest trouble: in this mode, i cant charge my batteries. If i dont find an solution this problem soon, i think, my device will be a BIG trouble. Grrr, i hate olipros program...
Thanks a lot, my athena is live again, i flash my original rom!!!
But the Olipros Unlockert isnt working, the installation go to 100%, the program said that the flashing is succesfull, but my SPL is still 1.1, and i cant flash any roms..
I can understand why. Any ideas?
The other thread was closed, you shouldn't double post.
Read the links I mentioned.
as in olis first post
"Please note: you must have .net Framework 2.0 installed with the services packs, if you don't it then it probably won't run till you download it.
SPECIAL INFO ABOUT STEP 2: When you run this step, first your device will be flashed; this is NOT the end of Step 2, you must then configure your device and set it up fully so you can access the menus etc (there will be a prompt to ask you to do this after the flash anyway). then you will be able to continue. please make sure to read ALL dialogs fully"
leave out the sim and sd card.
Some others have reported better luck with the shipped WM6 rom if they had trouble unlocking.
I installed the NET Framework 2.0 SP2 in my device and i put out my sim and sd card. And when i flashing the Olipros Unlocker, it went to 100%, but my SPL is still 1.1
I dont understand.
VorosAdam said:
I installed the NET Framework 2.0 SP2 in my device and i put out my sim and sd card. And when i flashing the Olipros Unlocker, it went to 100%, but my SPL is still 1.1
I dont understand.
Click to expand...
Click to collapse
the net framework should be on your computer.
what OS is on your computer ?
May be better if you use winXP
did you install an oficial wm6 rom ?
Read the later pages in the unlocker thread
My computer also have the NET Framework 2.0 SP2. And when the flashing didn't work, i also installed the NET Framework 3.5 SP1, but, when i flashing a ROM in my decive, it also went to 100%, but the SPL is still 1.1.
I use a 32-bit Windows XP in my computer.
My T-Mobile Ameo (Athena) is a second hand device, it was used when i bought. But the first user said me, that the original OS was the Windows Mobile 5 in my Athena, but he update from Windows Mobile 5 to Windows Mobile 6.0. He said that he update with an official T-Mobile way.
Ok all good so far
Did you use the unlocker from this thread?
http://forum.xda-developers.com/showthread.php?t=315831
The other thought i had was that you should try a different computer and usb cable
oh, thank you so mutch, i tried an another computer, and it flashed the SPL from 1.1 to 1.2!
thanks again
my htc advantaage x7500
hello myfrnd please help me as my phone is dead after i used ur rom upgrade 3.5, i was already using michy cooked version of window mobile 6.1 im new in this field and during upgrade process after going 92% it just stuck and and showing 3 color screen it has a msg of IPL 1.2 OLIPRO pls help me i will donate u if u could solve my problem
thanks
sheizi said:
hello myfrnd please help me as my phone is dead after i used ur rom upgrade 3.5, i was already using michy cooked version of window mobile 6.1 im new in this field and during upgrade process after going 92% it just stuck and and showing 3 color screen it has a msg of IPL 1.2 OLIPRO pls help me i will donate u if u could solve my problem
thanks
Click to expand...
Click to collapse
I saw someone with the same problem as you here awhile back and he was able to fix it. So keep your post alive or read the sticky post under the Upgrade section. I believe that was where I read it.
dead X7500
Hey Im also a sufferer of a dead X7500......this all happened wen I was trying to flash my ROM which was using a SPL !.20 OLIPRO
wen I try to re flash the device , it starts a stops at 1% and follows an error msg !
plzzzzzzzzzzzz help me out to solve this prob !
regards!
VorosAdam said:
i will try it, but i dont know where can i find my original rom...
and my second biggest trouble: in this mode, i cant charge my batteries. If i dont find an solution this problem soon, i think, my device will be a BIG trouble. Grrr, i hate olipros program...
Click to expand...
Click to collapse
I have the same problem would be kind and tell me how you solved the problem.
[email protected]