is it possible to overeap the calibration for the neo
or has anyone a rome with no calibration the touchscreen
Do you mean bypass?
Yes it is possible.
But why do you want to bypass that? Touch-Screen problems?
well, me personally i dont have screen problems
but i wanna know how to bypass that step ?
[HKLM\Software\Microsoft\Welcome]
specter16 said:
well, me personally i dont have screen problems
but i wanna know how to bypass that step ?
Click to expand...
Click to collapse
This is the key. Remember that it is useful just when you cook a room,and you may select every step you want.
[HKLM\Software\Microsoft\Welcome]
"Disable" = dword:FD
"Disable" = dword:EF
...
You have different options as below to add under this entry based on their description:
7F - disable everything except 'email setup' screen [WM5 only AKU 3.x]
BF - disable everything except 'password' screen [WM5 only]
DF - disable everything except 'complete' screen and the finishing tap
EF - disable everything except 'location & date time' screen
F7 - disable everything except 'pop-up menus' screen
FB - disable everything except 'stylus' screen
FD - disable everything except 'align' screen
FE - disable everything except tap on the first screen
FF - disable everything [displays first 'splash' screen and exits]
The dword you place 1st will appear 1st in welcome screen.
Example: ----->1st shows the align screen then the location setting.
"Disable" = dword:FD
"Disable" = dword:EF
======================================================
Source: http://www.techparaiso.com
search for the program being installed on computer named "remote screen alignment".
sokomind said:
__________________
Motorola mpx200x3
motorola mpx220 x2
O2 Atom
i-mate JAMin x6
i-mate k-jam x4
i-mate JasJar
Eten M500 x4
Eten M600
i-mate jam
O2 Atom Exec
Toshiba G900
HTC Touch P3450
HTC herald P4350
Toshiba G900
Asus P535 x6
Asus P525
Samsung i600
HP 6815 x2
HP 914C x2
HP 614C
HTC touch diamond x3
HTC P3300 x4
O2 Orbit
HTC P4600 touch pro
HTC p4500 imate jasjam
______________
Click to expand...
Click to collapse
!!
what a collection!
I've never seen such a large one even in my dreams!
Related
Hello everyone......
There I was, happy as larry - full of joy and praise for my Ameo now running mobile 6.....
Then I tried to make a video call (which I had been happily using on mobile 5 ) and errr......its gone!
I am using the WWE Moblie 6 ROM on 2.20.405.1
Radio 1.32.00.00
I have been on this ROM for AGES and didnt even notice...
Anyone got a remedy for my ignorance? Or should I be thinking about a new ROM?
Thanks
Search!
I did a search and found 1 other person asking this question....No replies....did I miss something?
I think there's a different phonepad (dialler skin) you can install which will bring the video call button back. I've seen it mentioned here somewhere.
Sorry to be so vague, but it least I can try to point you in the right direction.
edit - try here for an example - http://forum.xda-developers.com/showthread.php?t=290281&highlight=no+video+call
Pantaloonie said:
I think there's a different phonepad (dialler skin) you can install which will bring the video call button back. I've seen it mentioned here somewhere.
Sorry to be so vague, but it least I can try to point you in the right direction.
edit - try here for an example - http://forum.xda-developers.com/showthread.php?t=290281&highlight=no+video+call
Click to expand...
Click to collapse
Pantaloonie
Does this work for 128 and 96dpi mode,or only 192?
I have no idea, I haven't used it.
My dial pad already has the video call button, on PK's 2.0 ROM.
Pantaloonie said:
I have no idea, I haven't used it.
My dial pad already has the video call button, on PK's 2.0 ROM.
Click to expand...
Click to collapse
Pantaloonie, your dialpad that has video call button, is it a stock dialpad from PK 2.0 ROM or PK2.0 addons? Or is it a third party dialpad? I am using PK2.0 ROM and I dont think there is any video call button in PK 2.0 ROM.
-Red-
Yarod
Me too
After WM6, I can still try to make video call by holding the pointer on a contact and selecting "Video call". This either makes a voice call or doesn't connect. Without any realVGA even.
Any thoughts anyone?
Red_Toyol said:
Pantaloonie, your dialpad that has video call button, is it a stock dialpad from PK 2.0 ROM or PK2.0 addons? Or is it a third party dialpad? I am using PK2.0 ROM and I dont think there is any video call button in PK 2.0 ROM.
-Red-
Click to expand...
Click to collapse
Yes, its the dial pad included in the ROM. Only addition is an all black colour theme, not sure if that would make any difference.
Attached so you can try it.
May be is my poor english understanding, but I believe that some problems here are related to the realVGA "disable phone skin" feature.
May be someone doesn't knows that PHONE SKIN means also VIDEO CALL BUTTON. If you disable it... no phone skin? no party! (There was a commercial in Italy and maybe in some other country, No Martini? No party!) I used vjay big phone too for VGA res.
If you can't dial a video call and is switched to voice call, just check you AND THE PERSON YOU'RE CALLING are in a 3G area, no 3G? No party!
videocall
I ve test in wm6 spanish, ando today with the latest black rom and the videocalling din't works.
When i o a videocall he change o normall calling... Whats the mater?
Sorry for my english too
To make things clear
The WM6 system comes with 2 shapes of the phone. One is the standard WM6 Phone app inbuild in the OS and provided by M$. This does not have video call button (hence you can not use video call feature) and has very ugly interface specially if we talk about smart dialing.
The second shape wich also comes with all versions of WM6 ROMs (including PK ROM) is the HTC (or some other flavour of) Phone Skin which adds video button (and feature) and provides much nicer shape for smart dialing.
Now, the problem is that HTC Phone skin is writen only for qvga/vga 192 dpi. If you would use it in 128 or 96 dpi, you would find that the smart dialing has bug. The field for number dialed ascapes above the top edge of the screen.
That is way Tobias has decided to provide in his Real VGA an option to disable HTC Phone skin. This option is set to on by default.
This means that all of you have phone skin (HTC version at least) in your Athena. The question is whether it is on or off.
If you do not have the video call button on your phone, you have to go to Real VGA setting and unclick the option for disabling phone skin. Then after restart, you will have the video call button back, but if in 128 or 92 dpi, you will have problems with manual dialing (not seeing what has been dialed).
If somebody here has video button and does not have the bug in 128/92 dpi, it means he has some other flavour of Phone Skin. If so, please let us know, so we can find the solution for this problem at last.
Hi
Video call button already built in the Black 2.0 rom. But if you use the 192DPI then you can use it. If you use 128 DPI or 96 DPI you have to disable the dialpad with the Video call button and use the standard HTc dialpad (which do not have the Video call button). If you not disable the Video call dialpad then you can't see on the screen what numbers you are dialing. Therefore you have to choose 192 DPI with video call or 128, 96 DPI without video call.
Good luck
Device: X7500 with PK2.0 + Addons, Radio 1.50
RealVGA @128 DPI
Network : Virgin300/300
Softwares: SPb Phonesuite, Spb Backup, Spb Diary, Spb Traveller, Spb Wallet, Spb Finance, Core Player
Its look that the skin (whith the videocall button) solves the problem. Finally, i can made videocalls...
Ok, better in 196k, can use the fingers a resize the fonts of the programs... Thanks
Hi,
I got an O2 Comet (Atom Live). Also got a protective film on the touch screen.
Now the pressure needed to use the touch screen is quite high in my opinion.
Is it possible to tweak/change the threshold value for the touch screen via registry tweaks etc. ? Or is the touch screen sensitivity for the Atom Life not changeable?
I got Medkid's Atom Life WM6.1 ROM installed btw.
Thx for any help,
boba
Have you tried this??
HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\Touch
or find 'Threshold'
Change the value of Pressure Threshold.(INCREASE value ONLY!!!)
Example, just set the value at 11880.
That doesn't exist in the registry
Any other suggestions?
Try and see if its in there,
HKEY_LOCAL_MACHINE\Drivers\TouchPanel
What registry editor are you using?
Search your registry for DWORD, "PressureThreshold".
Nope its not there I'm using resco registry editor
Ok download the registry editor below and install it. (phone or storage card it doesn't matter)
Run the app and it should start something like this...
SCREENSHOT_1
Make sure you highlight HKEY_Local_Machine like in the photo otherwise it won't search correctly
SCREENSHOT_2
Now click on "FIND"
SCREENSHOT_3
Copy what you see in the photo onto your phone and click "FIND NEXT"
SCREENSHOT_4
And it should come up with something, if not I don't know what to tell you the instructions I have given are as handicapped as possible.
SCREENSHOT_5
Hi, thanks for the help. It couldn't find the key either. I don't think atom life phones have this key. Are you using an atom life under WM6 too?
no, but there are plenty of posts where people have done it.
That posts I have read reference different registry locations, so I assume that the pressure configuration is set by each manufacturer.
hi,
ive just flashed my mda touch plus with the german shipping htc rom with touch.dll... everything works fine, the driver is great, but i dont get sound on the device any advice/help?
It's working perfectly on my XDA star. Is there a difference between the XDA star and the MDA touch plus except the different look?
There are two things i would do:
-Hard Reset:
1.remove the battery cover.
2.observe that by the USB port, there is a small indentation. This is the reset switch access.
3.Keep the slider closed.
4.power the phone on.
5.press the “talk” and “end” buttons; while holding them down, use the stylus to probe into the reset switch hole at a 45 degree angle to the major axis of the phone.
6.when you get to the “press enter to reset the phone” page, press the center dpad.
-Reflash ROM
If this don't work for you post again or contact me over msn messenger: rabi128 at hotmail dot com
hi,
hard reset didnt work... ill try reflash with mary v0.2
edit:still nothing maybe i should wait for bug fixed v2...
anyway a question: active sync is connected with handy but i cant flash mary v1 ?(
My new HTC S740 is excellent except for one thing - the keypad backlight goes out after only 15 seconds. Very irritating in the dark.
I've looked for kb_light_timeout in hklm/software/htc/keypad but this does not exist.
I've found keylight timeout and qkeyledtimeout in hkcu/control panel/backlight which looks like the right place but altering values and rebooting makes no difference.
I've also looked in hklm/drivers/builtin/keylight and keypad.
I feel I'm very close. Can anyone help?
Yes Its most annoying as well as fact that only numbers or keys round circular button light seperately. Look forward to someone cracking it. Otherwise an excellent phone.
I agree, this is very annoying.
So theres no fix for this issue? To bad no ACT for this phone. An awesome phone, just wm standard gets so little love it seems.
I did some research today and he're the results:
1. This is far of to be a new issue. First complaints about the keyboard backlight timeout you can find under Qtek models...
2. Apparently, they were just few (2-3?) HTC models supporting a registry entry included in WM hkcu/control panel/backlight/QKeyLedTimeout - Rose definitely doesn't
3. The issue could be a case of WM 6.1 limitation - Rose has in fact three keyboard backlight arrays with separate light managements (soft keys, numeric, QWERTY - try to use them simultaneusly and you will see - their timing is independent on each other) and I've found some extra HTC registry entries concerning power management confirming a bit non-standard settings. Unluckily, nothing useful there for the kb backlights.
Sorry, based on my experiments, I can advice you only one very strange way how to overcome it for now: Limit the display timeout to the same 10 seconds as the keyboard has. At least, first press of any key will become inactive and just light-up both display and keyboard. Until display works, all keys are still active even the keybord backlight is off.
Nevertheless, any opposite finding will be appreciated...
Thank you for your investigation
I have a new s743 and this is the exact problem I came searching for fix for!
Too bad - it really is a sweet phone.
-John
To me this is a winmo thing. I don't understand why this option isn't included from the factory. It is a plain "NO BRAINER"! It's been this way on all my previous devices whether pro or standard. The diff being the pro os has wonderful tweaks and various cabs one can install to set the time out. What we need is to get some tweaking guru to set up something like ACT for standard. Problem is so little love for the standard os. The screens are to small anyway for my taste. I'll just stick to pro, the tweaks are better.
Well, i set the display timeout on my device to 5 seconds. Backlight of the qwerty and numeric keypads went off after 5 seconds.
The softkeys remained lit till 10 seconds was up.
Hello,
I have had a TG01 for 2 months now. I have installed HTC Sense 2.5, used it well, but getting a bit bored of it... Decided to switch back to the Toshiba Menu.
Before I bought this phone, i watched alot of youtube videos about the Toshiba Interface. It had all those cool features, like when swyping across homescreen, you get a cool 3D spinning stripey affect. My TG01 doesnt have these 3D effects. It just move along to next stripe in a very plain and boring 2D effect...
Also another cool feature i saw, was on the internet explorer, you could put your finger on the touch sensor bar, shake the phone, and it goes back a page, or forward a page. Mine has no settings for it, and can't do it...
I am on UK Orange Rom 6.5. Anyone having the same issues as me?
Oliver
-3d effects ... i had last time i checked .. make sure ur cpu isnt powered down
-touch sensor , works for me in IE ... but rebinded to alt-tab since opera doesnt support it
-shake operation , my options are : accept call , today screen , phone screen
never heard of shake explorer integration
toshiba removed these features with the wm 6.5 update... the old 6.1 rom got these features, but they never worked really well. this is the reasons why they removed it, i think.
i got also no spinning bars anymore, in the toshiba menü. and no point in the menu to turn it on or off, like it was there at the 6.1 rom. but the reason for that can also be the orange branding. i think at the german o2 rom the bars still spinning
and sorry for bad english
Terence Skill said:
toshiba removed these features with the wm 6.5 update... the old 6.1 rom got these features, but they never worked really well. this is the reasons why they removed it, i think.
i got also no spinning bars anymore, in the toshiba menü. and no point in the menu to turn it on or off, like it was there at the 6.1 rom. but the reason for that can also be the orange branding. i think at the german o2 rom the bars still spinning
and sorry for bad english
Click to expand...
Click to collapse
oh, okay, thanks terence