First off, been trolling these forums for awhile now, finally just registered to post and what not. Everyone here does AMAZING work and your efforts should be heralded and shouted from the skies! lol ok enough butt kissing..
Anyways, I got a few questions. The first one is to clear up confusion:
The first leak that came out from the Taiwanese guy, that is referred to the "2.1 leak" correct? And the March 24th is "2.1 OTA Leak" ? Just reading all these threads I'm getting real confused on them.
Now I flashed the newest leak (March 24th). This from what I have read is not rooted at the moment correct? And with this version, I can't use the recovery ROM due to no being rooted correct? I just did the non root way of flashing it...
If this release does become rooted, will I be able to root my phone if I did the non-root flash?
And lastly, all the ROMS that are out. Are the based off the 1st leak root and that root only?
Sorry for all the randomness of the questions... Some of this stuff is just very overwhelming. Thanks in advance for all the future help/info. And sorry to those that will take the time to flame me and what not.
take a look at some of the links in my signature. specifically the very last one. to learn more about what each rom is based off of, then go through the links in the rest of my sig and the devs that made them might say in their thread what each rom is based off of. to start rooting your phone, if you do get to that point read the second to last link. unfortunately it sounds like you do not have a rootable rom on your phone now so you wont be able to follow that thread, unless you get a new phone and start from the beginning.
Related
Hi everyone,
I am new to the android world having just bought a galaxy s2, so please be gentle. I'm a previous iphone owner and always hated the restrictions apple put on their phones and dictated the way I could use my handset! I've since moved over to android and my first impressions are OMFG, how confusing is all of this!! I'm not techphobic by any means but I am struggling to piece together how the world of android works and I have spent a lot of time reading various things about ROMs, rooting, flashing, kernels etc... but I am getting more and more confused!
I recently bought a Galaxy S2 which is running a custom ICS ROM on it (resurrection remix 1.0) and also has CWM on it. Having looked at the forums i can see that another version in out (1.3 i believe) but i'm very hesitant to try a flash as i dont want to screw my phone.
The way I see it i've got two choices, either try and reset the phone to stock so that warranty etc... remains uneffected and then update to ics through kies when its available or try and install a later version of one the ics ROM's that are availabe. I was wondering to that end if you lovely people coudl give me some guidance.
If I were to reset my phone to stock how do i do this bearing in mind i am confused about
a) what kernels are in the first place and
b) which one i woudl need for my phone and will I need a usb jig for this?
c) -i need to unroot my phone to return it to stock and if so how do i do this
also:
-what is the difference between an insecure and secure kernal
-if i flash my phone to a newer version of ics can i revert back to 1.0 as at the mo apart from the odd app crashing here and there I'm not having any probs with it.
I'm reading about GAPPS and APKs and dont know what the hell these are either but they keep popping up every so often.....basically i'm confused and on the verge of a breakdown!!
Please could somebody help mw with this and massive apologies if i've posted where i shoudnt have.
Thanks in advance
Saf
If you had taken the same time took for typing here to search and read you would have learnt almost everything...
go through these stiky threads
also see my links in singnature.......read as much as possible....no other substitute for reading and learning, nobody will answer you in essays like you typed
http://forum.xda-developers.com/showthread.php?t=1544657
Appreciate what you're saying mate and thank you for taking the time to reply. I have been reading various threads over the last day or so but the problem is when something like this which is quite techinical is completely new territory you dont know where to start. Google throws up page after page of stuff that doesnt make much sense and i've searched on the forums here and read up on quite a bit but again am not sure if i've grasped it.
problem is I didnt install the custom ROM on the phone, i bought it like this and to do anything further with it i dont know if i need to go back to the original owner with more questions or can i just go ahead and start tinkering with it without knowing what software was originally on the phone? (bearing in mind that various posts state that you need certain software which is as close to the original one as possible)
Thanks anyway
Saf
this is the stage which passed by all the noobs including me, dont worry
Your strating treble will only be over when you start flashing a ROM,
cool.
ima go ahead and try and install version 1.3 of resurrestion remix! Wish me luck hehe!!
Good luck,
dont forget to follow the steps mentioned the ROM thread atleast...
Ok firstly im no stranger to Android, and not entirely new to Moto (Atrix 4G), but I have to say that the RAZR has me pretty confused.
I have a Rogers RAZR being delivered that I picked up on the cheap. Its brand new and supposedly "unlocked". I would love to get ICS running on it, but despite reading the treads here for the last couple of days im still uncertain if its possible
I have used RSD before with the Atrix, but it was only to apply a patch that would allow you to unlock the bootloader (also surprised to see that the RAZR is still locked down). I know that you can flash ROMs via RSD, but what I do not understand is whether or not root and custom recovery is required? I assume that if you're flashing an official ROM, then no it is not. Correct? I also thought that flashing full sbf files was dangerous to attempt. Maybe im way off here, I don't know.
Im still a bit confused about the GSM patch for CDMA ROMs too. People seem to report issues with their phones when this is done. So im not too sure that it is a good idea to go that route either.
I understand that when things start to happen for a phone in terms of ROMs, recovery, work-arounds etc... that it can get a bit messy in the forum and things can get buried a few pages back, but i've been reading until my head hurts and i'm still uncertain where to begin. Also, there is an update that is also "supposedly" beginning this month for official ICS, but we all know that could be delayed, and delayed, and delayed. Wondering if I should just wait.
I guess I'm really hoping for someone to say do this, then this, and this...viola! I don't need an in depth step by step as I know how to figure out instructions from their respective threads. But if someone has a min to post a point form list like
Root with Motofail
Install Boot to CWM
Flash this ROM
Then this ROM etc etc...
Any help is appreciated and I hope no one thinks im asking to have my hand held here, but im at a loss. Just don't want to F my new phone when it arrives.
Thanks in advance for anyone who can help a fella out.
brunswick000 said:
Ok firstly im no stranger to Android, and not entirely new to Moto (Atrix 4G), but I have to say that the RAZR has me pretty confused.
I have a Rogers RAZR being delivered that I picked up on the cheap. Its brand new and supposedly "unlocked". I would love to get ICS running on it, but despite reading the treads here for the last couple of days im still uncertain if its possible
I have used RSD before with the Atrix, but it was only to apply a patch that would allow you to unlock the bootloader (also surprised to see that the RAZR is still locked down). I know that you can flash ROMs via RSD, but what I do not understand is whether or not root and custom recovery is required? I assume that if you're flashing an official ROM, then no it is not. Correct? I also thought that flashing full sbf files was dangerous to attempt. Maybe im way off here, I don't know.
A. Yes. If you're flashing an official rom you do not need root/cwm. Flashing full sbf with rsd is safer than cwm restoring a nandroid backup. But if you do you'll not be able to receive further otas updates. Bootload is locked in Razr also there's a region signature verification. So you cannot flash another region rom. :/
Im still a bit confused about the GSM patch for CDMA ROMs too. People seem to report issues with their phones when this is done. So im not too sure that it is a good idea to go that route either.
A. Most of related problems on that is due bad procedure following.
I understand that when things start to happen for a phone in terms of ROMs, recovery, work-arounds etc... that it can get a bit messy in the forum and things can get buried a few pages back, but i've been reading until my head hurts and i'm still uncertain where to begin. Also, there is an update that is also "supposedly" beginning this month for official ICS, but we all know that could be delayed, and delayed, and delayed. Wondering if I should just wait.
A. There's one official update for latam razrs, like yours. The 2.3.6 > go into dev section and you'll find out. Ics will out in a month. Fingers crossed!
I guess I'm really hoping for someone to say do this, then this, and this...viola! I don't need an in depth step by step as I know how to figure out instructions from their respective threads. But if someone has a min to post a point form list like
Root with Motofail (motofail is for gsm 2.3.6 only)
Install Boot to CWM (this is for restoring custom roms and backup, u need to be root for)
Flash this ROM (look for latam razr roms)
Then this ROM etc etc...
Any help is appreciated and I hope no one thinks im asking to have my hand held here, but im at a loss. Just don't want to F my new phone when it arrives.
Thanks in advance for anyone who can help a fella out.
Click to expand...
Click to collapse
If I didn't get any point let me know.
Cheers
Sent from my XT910 using Tapatalk 2
Thank you. You hit the points. Much appreciated.
Sent from my Nexus S using xda premium
Just order a new atrix 4G. I have looked at the possible ROM's to use and I want to try out the Neutrino ROM. I have rooted devices before but I am new to Motorola devices. Please help me find the CURRENT steps I need to take to get to be able to run the Neutrino ROM? I have used the search bar but a lot of the threads that I have found contain links that are no longer valid. Such as http://forum.xda-developers.com/showthread.php?t=1154600 Also I read a this link http://www.xda-developers.com/tag/motorola-atrix-4g/ which has me a worried that I may end up having an issue because all of the guides or seem to have been written before May 15th.
Thanks for taking a look and sorry if that was a little confusing I just didn't want to get flammed for being lazy. In the end I just want to know the most up to date way to get to the Neutrino ROM?? Below I will have included the specs. If I need to post anthing else please let me know
I recieved my phone last night and set it up on Striaght Talk.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model Number: MB860
Android Version: 2.3.4
Your help is GREATLY APPRIECIATED!!
Also on the youTube videos they all seem to say "DO NOT DO TRY TO UNLOCK OR ROOT IF YOU HAVE 2.3.4 OR IT WILL BRICK YOUR PHONE!!"
Is this still the case or has there been a work around for it yet??
you have to unlock bootloader, but you can get FAIL with last step.
If you will get fail - don't worry, you can still unlock it via fastboot (tested on mine INTL Atrix, but every phone is a little bit different)
flash recovery, wipe data, wipe cache, wipe dalvik, flash rom, flash gapps. Done
Thanks ovitz. Can you point me to a thread describing how to unlock the bootloader on this phone?? I can do all the other stuff that you said I need to do after the bootloader is unlocked(clearing and flashing). Just really dont want to mess up my phone. I got 2 actually one for my girlfriend as well. I have java and all SDK/ADB and all programs that I may need. Just want a step by step for comfort.
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
What is the other way (not using fastboot) to unlock this bootloader?? I tried fastboot oem unlock and got this message "INFOOEM unlock is not implemented"
Do I need to use an SBF with RSDlite or something to make this possible? If so please point me in the direction of that thread!?!
Thanks for anyone that can help
ravilov said:
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
Click to expand...
Click to collapse
Sorry ravilov...Did not see your post as I had started a post and then ventured off to seach XDA and some other forums again as well. I have gotten to the link that you posted several times. I just saw that is was posted a long time ago and that there is a lot of things in that post that dont make too much sense to me.
First it says "All phones If you have unlocked then try to use 2.3.4 update zip from Motorola servers, then revert back to a "pre-unlock" version(1.8.3 or earlier on ATT) you will get bricked! Do not use the OTA via experimental servers and revert to older versions WITHOUT pudding preinstalled in your sbf. ATT ONLY Get your 1.8.3 with pudding from the pudding/unlocker section below."
Then shortly after is says "Disclaimer: Tested on 1.8.3 and 2.3.4 using sbf_flash and RSDLITE 5.3.1 or higher, usual warnings being responsible for your own actions yada yada"
So I dont really know if it works or not on the newer atrix's. I dont want to brick a brand new phone and I would just like to see that some one else has done it recently. So yes my eyes are open and search did work for me if you did not see the 2 other threads I mentioned. I just want something up to date, not from early 2011. If it can be confirmed that this works or If you know someone who has unlocked it recently, that would be great to hear from them.
Thanks for posting the link to that thread anyways though. Much apprieciated!
Can anyone tell me if the IHOP method to unlock bootloader will work with my phone?? I cant post in that thread because I do not have enough posts. Here are my specs so I could get some help with which patch to use with RSDlite.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model number: MB860
Android version: 2.3.4
Baseband version: N_01.100.00R
Kernel version: 2.6.32.9
[email protected] #3
APflex version: GAS_ASIA_USAOLYGBSEART_P011
GAS_ASIA_USAOLYGBSEART_A003
GAS_ASIA_USAOLEMSEARET_M001
Build number: 4.5.2A-74_OLE-31
Something else I want to note is that it was bought on ebay as unlocked so I am assuming that is the radio. When I set up the APN for straight talk it did have the choices for AT&T US, AT&T US HSDPA, AT&T US Tether, AT&T US MMS. So this is why I am a little confused/scared as to which piece of pudding to use. It looks easy enough to unlock and clear the caches and flash the ROM I will want to use. Just would like to know which one to use.
Please, please somebody help!!:fingers-crossed:
Thanks you for taking a look to help. Much apprieciated!!!
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
das8nt said:
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
Click to expand...
Click to collapse
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Oregon2 said:
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Click to expand...
Click to collapse
Quite welcome.
APNs are usually set by your SIM, if it's provisioned properly and the phone supports it.
Sent from my MB865 Atrix 2 via Tapatalk 2
Good to know About the APNs. Just to let you know I unlocked, rooted, and flashed the ROM the day you first replied. So I've been running with a new ROM for 3 days and the battery life is great!!
If anyone out there has installed the Neutrino ROM, I have one more question. On the Neurino ROM page it say to do these 2 steps:
"Then, after booting, click on script manager, navigate to /system/etc and run NitroCharger.sh as ROOT and at BOOT!
It is also HIGHLY recommended to download the GPS Mod found in #2. Then you're done."
I tried flashing the GPS mod but I keep gettng an error. Then on my first boot I tried going to /system/etc and from there I do not know where to locate NitroCharger to run it for either. Any help on these two issues would be great!! Also another thanks for everyone for taking a look and helping.
I would post in that thread but I still dont have enought posts.
You really need to reread the original Neutrino thread, since all of this has been answered countless times.
YOU DO NOT FLASH THE GPS MOD DIRECTLY. Open the ZIP and read the instructions.
NitroCharger is only available as an OTA update, but you might reconsider if you really want it since it's been known to cause issues.
Again, I know the thread is very large, but whatever questions or issues you might have, it's very likely answered there already.
Thanks you for just answering, even though you think I should just reread the thread. That answered my questions very fast. I will just not run Nitrocharger, I thought it may casue problems if I could not get it to run, instead you said it is the opposite. As for the GPS mod I just did open up the .zip and read the readme. I pulled out the United_States.zip
Can I just use CWM recovery to flash the US.zip now or do I have to clear all my caches and the likes beforehand?
I know your very busy and I apprieciate the time you take to just look at it.
I have just started my own business and it is going great!! but I have been working 14+ hour days with usually 9 hours hour doing very hard physical labor 6 days a week!! I need to hire more employees soon, lol. I read the whole IHOP thread from front to back and the Neutrino thread but I was very exhasted and stayed up until 330 in the morning doing it!! So again I thank you for taking your time I appriciate it very MUCH that you are helping me to have a fun android experiance and also to learn something new to me!!
Yes, you can just go ahead and flash United_States.zip. No need to clear anything.
Awesome your the MAN!! Thanks again :laugh: :good:
Let me first say I've looked through the forums and can't find a direct answer to this, so I hope this doesn't bother you guys.
I just bought the noteII yesterday and so far it looks like I'm selling the iPhone5 (why'd it take me so long?)
I do want to root my noteII so I can use the secure setting and other plugins with Tasker mostly. Plus just having full control.
Seems I have Android 4.1.1 with Baseband version I605VRALL4 and Build JR003C.I605VRALL4 (kernel 3.0.31-414933)
Now I'm a mac user so one question is - is there a way to do this through mac? if it possible...second is if it's not how long until it looks like it might be? gives me time to find a windows PC.
snickn said:
Let me first say I've looked through the forums and can't find a direct answer to this, so I hope this doesn't bother you guys.
I just bought the noteII yesterday and so far it looks like I'm selling the iPhone5 (why'd it take me so long?)
I do want to root my noteII so I can use the secure setting and other plugins with Tasker mostly. Plus just having full control.
Seems I have Android 4.1.1 with Baseband version I605VRALL4 and Build JR003C.I605VRALL4 (kernel 3.0.31-414933)
Now I'm a mac user so one question is - is there a way to do this through mac? if it possible...second is if it's not how long until it looks like it might be? gives me time to find a windows PC.
Click to expand...
Click to collapse
You will need a windows PC with the samsung drivers installed as well as ODIN.
Yes you can still root, but you cannot unlock the bootloader at this time because your phone has accepted the OTA - so flashing custom ROM's, kernel's, etc. is out. All the info you need is in this thread to root (if you have a VERIZON Note2):
http://forum.xda-developers.com/showthread.php?t=2024207
Use the route66 image (there are three listed to choose from, be sure to pick route66) - there is lots of information on what you want to do in the latter 15 pages of that thread.
stop after section 1a.
Honestly though out of the box the phone is outstanding, and without an unlock method for the bootloader, I'd recommend doing nothing. Too many people have already borked their phones due to lack of experience, knowledge, reading the steps correctly...you get the idea. I'm not commenting on your knowledge, just saying what I would do after reading as much as I could find here on this phone. The terrific devs will come up with a way to unlock and root the post OTA version soon enough.
Honestly the two things that is causing me to want to unlock it is I can't seem to get Tasker to control lockscreen properly. I have it setup to detect what cell towers I'm on and not lock in the house - and yet...it continually locks. Shows I'm on that cell tower, just seems like it can't properly control the lockscreen.
Secondly, I'd like to make GPS only come on when certain apps are open - and that seems to be a root only feature.
Reason enough for me :thumbup:
courtesy of my unlocked Note2
after these steps, will I get OTA for current security fixed updated?
alu1008 said:
after these steps, will I get OTA for current security fixed updated?
Click to expand...
Click to collapse
You know I'm going to forgive you this time for not reading the OP and then the other giant thread on it but come on man, seriously.
If you have a brand new phone and you took the OTA, you can still root. Just do NOT try to install a custom recovery, kernel, rom, etc.
If you are rooted and you took the OTA, you should still be rooted OR you will already have root installed. Again, you CANNOT install a custom recovery, kernel, or rom, etc.
alu1008 said:
after these steps, will I get OTA for current security fixed updated?
Click to expand...
Click to collapse
You will get prompted. Defer the OTA then freeze or uninstall SDM 1.0 using Titanium Backup from the Play Store.
You can get the OTA applied using a safe zip made by Adryn...its a thread in the General section I think.
The threads are full of questions and answers on this topic.
courtesy of my unlocked Note2
ILMF said:
Too many people have already borked their phones due to lack of experience, knowledge, reading the steps correctly...you get the idea. I'm not commenting on your knowledge, just saying what I would do after reading as much as I could find here on this phone. The terrific devs will come up with a way to unlock and root the post OTA version soon enough.
Click to expand...
Click to collapse
People bork their phones all the time. Samsung phones are the easiest to "fix". It amazes me that even with step by step videos people still get things wrong. Life is about living and learning. If you screw it up 9 times out 10 it can be fixed.
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
you can lead a horse to water but you cant make him drink.
I have posted it on another thread but no luck so I will post a new thread. I have tf201. Its an awesome device (aside from the week wifi signal) and I have been happily draining its battery for the last 2.5 years. However the time has come to move to a custom rom. Asus abandoned the device for no reason and things are starting to slow down and its just sad. So I am thinking of taking the big step for rooting and going to a custom Rom in order to restore the glory of this awesome device. I searched and I have concluded that perhaps the best solution is the SlimKat rom but here things get tricky. Most of the guides I have seen mention that though its a TF300 rom it is compatible with TF201 but the process only mentions guidelines for TF300 users.
So I need help and I am sure there are a couple of people out there in the same need. I am on a stock version of 4.1.1 with a 10.4.2.18 kernel. Can anyone provide a full process for doing the upgrade. And I mean a full process like rooting, installing twrp , upgrading kernel and etc. I know most people post links saying go there and you will find what u need but when a thread is 100 pages its like searching a needle in a haystack and I really don't want to brick my device doing something, someone suggested and 10 pages later it was discovered that he was wrong and I missed it.
I know its a lot of asking but for someone who is fairly knowledgeable with android with the device I am sure that devoting a little time for people who just started experimenting with android development will do a lot of good for setting some good foundation for them to go on and one day give back to the community.
Thank you in advance.
Nailen said:
I have posted it on another thread but no luck so I will post a new thread. I have tf201. Its an awesome device (aside from the week wifi signal) and I have been happily draining its battery for the last 2.5 years. However the time has come to move to a custom rom. Asus abandoned the device for no reason and things are starting to slow down and its just sad. So I am thinking of taking the big step for rooting and going to a custom Rom in order to restore the glory of this awesome device. I searched and I have concluded that perhaps the best solution is the SlimKat rom but here things get tricky. Most of the guides I have seen mention that though its a TF300 rom it is compatible with TF201 but the process only mentions guidelines for TF300 users.
So I need help and I am sure there are a couple of people out there in the same need. I am on a stock version of 4.1.1 with a 10.4.2.18 kernel. Can anyone provide a full process for doing the upgrade. And I mean a full process like rooting, installing twrp , upgrading kernel and etc. I know most people post links saying go there and you will find what u need but when a thread is 100 pages its like searching a needle in a haystack and I really don't want to brick my device doing something, someone suggested and 10 pages later it was discovered that he was wrong and I missed it.
I know its a lot of asking but for someone who is fairly knowledgeable with android with the device I am sure that devoting a little time for people who just started experimenting with android development will do a lot of good for setting some good foundation for them to go on and one day give back to the community.
Thank you in advance.
Click to expand...
Click to collapse
I am in the exact same position as you.
Lets hope someone can help!!!
Hello,
I was in the same position as you. And I decided to unlock and install a new rom. I did that on July. In concrete in have installed the CROMBi-kk ROM the link in the developers section is: http://forum.xda-developers.com/showthread.php?t=2773812
To unlock is very easy. Just download the Asus app and install it in Android and follow the steps.
I Followed this link: http://forum.xda-developers.com/showthread.php?t=2041627
In this link I did the unlock and the installation of Adroid SDK (this driver for the PC for recognizing the device when you start in bootloader mode).
After installing the driver I follow the post #4 in the CROMBi-kk thread to flash and install the new rom.
Sorry for my English. I don’t know I have explained it ok.