Related
I'm not trying to spend alot of cash..Maybe 40$.
I've got a 2gig now and it's just too small for my needs. I had Android plus music and photo's and it's full.. I'm looking for a 8 or 16 gig.
What should I be looking for?? I've never considered the "class" of a card..Is that about the same as the Cas Latency of ram??
Anyway..Whats the best for my budget?? I"m looking to order tonight so any help ASAP would be welcome..lol
Thanks
~SMurf
Edit: I don't need an adapter is it would make it cheaper..lol
8gb is around 19..20$..but stay with class 4 as lower class has bad effect on card reqding speed,streaming speed and data trasfer speed..u will lose it on class2
saurabh88 said:
8gb is around 19..20$..but stay with class 4 as lower class has bad effect on card reqding speed,streaming speed and data trasfer speed..u will lose it on class2
Click to expand...
Click to collapse
I almost got a class 4 PNY 8 gig from wal-mart for 30$..I thought it was high so I put it back..I'm on Newegg right now hunting but it's 2:49am here now and I'm tired..lol
But thanks for the info.
smurfgod said:
I almost got a class 4 PNY 8 gig from wal-mart for 30$..I thought it was high so I put it back..I'm on Newegg right now hunting but it's 2:49am here now and I'm tired..lol
But thanks for the info.
Click to expand...
Click to collapse
Good call, I don't like PNY stuff in general. I bought a PNY USB thumb drive on impulse. Needed it last minute for a business trip, and it seemed like a good price for the capacity. It was really cheaply made, and the USB port part eventually pulled apart from the plastic body.
Also got a PNY SD card (not a Micro, but a regular SD for my camera). Again, probably since it was good capacity for the $$$, and I figured its a simple SD card, what can go wrong? Well the plastic body started splitting apart, and the "read only" lock switch fell out. I actually found the little plastic lock switch part (was in my travel bag) and was able to super glue the card back together.
Moral of the story, I'm personally going to stay away from PNY products from now on.
Sandisk makes very reliable SD cards. But they tend to be a bit pricier than other brands, and class 4 and higher are hard to find in the higher capacities for the Sandisk. I'd stick with a reputable dealer, like Newegg (as you mentioned). There are lots of SD cards on eBay, but lots of them are fakes, tampered with (and relabeled) to make them report higher capacity than they really are.
I haven't gotten a new card yet but founf out my 2 gig is actually not half bad. I was adding the droid files to my card after a format and the write speeds got to 5.25 megs.guess its better then what I thought it was..maybe a class six?
Isn't there an app that tells you all that stuff?
Sent from my MSM using XDA App
I bought one of these from eBay, and am very pleased with it. It's a class 6 with USB reader.
A GENUINE SanDisk 16GB micro SDHC can be found easily on eBay for under $40 shipped. Avoid "bulk" and janky Hong Kong sellers. Buy blister pack retail sealed SanDisk to get the real thing. The fakes out there are staggering.
The effort is well worth it, the 16GB is very conservatively classed as 2, but far out-performs in use as attached benchmark shows.
It plays Avatar silky-smooth and apps on card fly. Too much room will seem silly in a few months usage!
smurfgod said:
I'm not trying to spend alot of cash..Maybe 40$.
I've got a 2gig now and it's just too small for my needs. I had Android plus music and photo's and it's full.. I'm looking for a 8 or 16 gig.
What should I be looking for?? I've never considered the "class" of a card..Is that about the same as the Cas Latency of ram??
Anyway..Whats the best for my budget?? I"m looking to order tonight so any help ASAP would be welcome..lol
Thanks
~SMurf
Edit: I don't need an adapter is it would make it cheaper..lol
Click to expand...
Click to collapse
Hey there.
NewEgg is definitely where you want to shop. I have this (Although my purchase came with all the adaptors):
http://www.newegg.com/Product/Product.aspx?Item=N82E16820211351
Great product, completely satisfied and great quality. Going strong now for over 9 months without a single data loss issue, or anything really to complain about at all.
I purchased this one from Newegg
http://www.newegg.com/Product/Product.aspx?Item=N82E16820208453
So far it has been working great, I dont have any read/write test stats. But I have been listening to music, moving files, and watching video's without any problems.
I am just wondering how many people ejected their sd card on accident because of how far it sticks out from the edge. I already had mine pop out in my bag. Scared the hell out of me because it is a 16gb card!
Had mine fall out and didn't even realize, someone just happened to walk by and saw an sd card on the floor, I would have definitely lost it if they never saw it...thinking of trying some tape to keep it in there
Nope. Mine stays in. I am aware that due to the slopping edge of the Prime, the microSD card does stick out a little more than it should. I don't touch it.
Bye.
Sent from my Transformer Prime TF201 using xda premium
Me too
Mine stays in too. Just be cognizant of the fact that it can get ejected if you bump it, or sit the tablet on that edge (why anyone would rest the left edge of the tablet on anything is beyond me. Then, don't bump it. If you DO bump it, get your card, cause it just fell out. Basic rules of observation and taking cautions with an obviously compromised bit of design. They could have easily had the slot/socket mounted a tiny bit deeper.
Oh, and if someone tell it its a great idea to file down the edge of a Micro SD card, say, a 32 Gb Class 10? Just a LITTLE? And while you are doing it you immediately see a it of copper exposed? That's a bad thing. Do not ask how I come upon this information. I do NOT want to talk about it.
Hello,
I read on another thread that it could be efficient to put some silicone (after the SD is in of course), just on the outlet of the hole.
When it dries, it can be peeled and taken of, and it put a little more strength for holding the microSD in place...
Has anyone tried?
monkey10120 said:
I am just wondering how many people ejected their sd card on accident because of how far it sticks out from the edge. I already had mine pop out in my bag. Scared the hell out of me because it is a 16gb card!
Click to expand...
Click to collapse
discussion thread for this issue is here, along with some proposed workarounds:
http://forum.xda-developers.com/showthread.php?t=1436546
pretty obvious solution but some people may not know.
Take the plastic microsd card that came with the tablet, cut about 1/3 of it off the back end (preferably at a 45 degree angle to create a wedge), put in your microSD card, slide that 1/3 peice in on top.
it should be in there pretty snug now.
I did this and my microsd card never comes out in my bookbag now.
A bit of a ghetto fix, and it makes it a little more difficult to remove your sd card, but hey - it stays in there and you'll probably never notice.
Would post pics but my tf201 is my camera.
By the way - make sure the tablet recognizes your card before sliding the wedge in.
Maybe the cards are made differently, but it's been tried before, with poor results.
http://forum.xda-developers.com/showpost.php?p=23047612&postcount=105
Another ghetto fix for a Prime design flaw.
wokka00 said:
Maybe the cards are made differently, but it's been tried before, with poor results.
http://forum.xda-developers.com/showpost.php?p=23047612&postcount=105
Click to expand...
Click to collapse
I think he means take the dummy card and use a part of it as a wedge, no sanding of the card with the memory needed.
I had my 64 gig card shoot out onto the side walk last week, fortunately I saw it happen.
Got me thinking that maybe the retention spring is a little stronger on the prime as this thing flew at least 3 feet.
I'll give this a try. Thanks
Good idea about wedging. I think I'm gonna go with riuber tape route. Gonna cut a few strips and either place it on top and another strip on the bottom of the slot. So the card will be more flushed but still can be easily take out. Will post results.
EDIT: My mod seems to be sufficient but probably will post in another thread. Dont wanna hijack this one unless OP is ok with it.
wow didnt even know this was an issue, mine has never fallen/popped out yet.
will be on the lookout now though, thanks for the heads up guys.
drherron said:
I think he means take the dummy card and use a part of it as a wedge, no sanding of the card with the memory needed.
I had my 64 gig card shoot out onto the side walk last week, fortunately I saw it happen.
Got me thinking that maybe the retention spring is a little stronger on the prime as this thing flew at least 3 feet.
I'll give this a try. Thanks
Click to expand...
Click to collapse
Ah, read through that way too fast. I wonder whether having additional pieces in the slot would create issues. Still, seems like a solution that could work.
Lock-N-Load said:
Another ghetto fix for a Prime design flaw.
Click to expand...
Click to collapse
its not a design flaw. it was made to be easy access. Also there is size constraints.
Also to the op, i would not be telling people this. Especially when you get to large size cards where the WHOLE card is the flash memory. Someones going to look at this post and destroy their $50-100 32gb sd card.
monkey10120 said:
its not a design flaw. it was made to be easy access. Also there is size constraints.
Also to the op, i would not be telling people this. Especially when you get to large size cards where the WHOLE card is the flash memory. Someones going to look at this post and destroy their $50-100 32gb sd card.
Click to expand...
Click to collapse
Unless I misread the op, he isn't saying to cut your microsd card, but rather the dummy card that came with your prime.
Lock-N-Load said:
Another ghetto fix for a Prime design flaw.
Click to expand...
Click to collapse
I was just about to flame you, then i saw your avatar. And everything was clear
clouds5 said:
I was just about to flame you, then i saw your avatar. And everything was clear
Click to expand...
Click to collapse
Ouch, admission of flaming lol
My card has come "unsprung" once so far. Luckily it did not fly out onto the floor, I noticed it sticking out too far as I was putting the tablet down.
I'm really just getting tired at the number of issues with this thing. The more I use it the more it becomes clear we are Asus' beta testers.
clouds5 said:
I was just about to flame you, then i saw your avatar. And everything was clear
Click to expand...
Click to collapse
wha'ts to flame? its true. Using a piece of plastic to make a friggen wedge to wedge your card in place? Why wedge you card in place? Because it pops out. Why does it pop out? Because when the card is inserted it is not flush but sticks up several mm and can get hit and popped out as many have found. Why? A design flaw.
So, this is a ghetto fix (just like the people using tape to tape their cards into place or a beer can to fix GPS) and it is a design flaw as no other device I have ever seen or owned has a card that is not flush and sticks up when inserted. None.
monkey10120 said:
its not a design flaw. it was made to be easy access. Also there is size constraints..
Click to expand...
Click to collapse
WTF you talking about? I guess you failed to read the original thread of dozens of people losing theirs cards as the cards stick out the top of the slot and get randomly ejected.
Find me 1 other microSD card slot device where the card sticks out like this and is not flush.
Bah.. this is 100% a design flaw. No device has a card slot that allows the card to stick up like this design does.
As for "design constraints" really? what? you telling me they could not have moved down the reader a few MM on the board to make the card flush with the case? bah.
Lock-N-Load said:
WTF you talking about? I guess you failed to read the original thread of dozens of people losing theirs cards as the cards stick out the top of the slot and get randomly ejected.
Find me 1 other microSD card slot device where the card sticks out like this and is not flush.
Bah.. this is 100% a design flaw. No device has a card slot that allows the card to stick up like this design does.
As for "design constraints" really? what? you telling me they could not have moved down the reader a few MM on the board to make the card flush with the case? bah.
Click to expand...
Click to collapse
you clearly don't know how much of a ***** it was to get the microsd card out of the original transformer, you had to take a knife and press the back of the card to get it spring out.
In fact, the reason they probably designed it this way was because of complaints like this one in an attempt to satisfy everyone.
Big mistake on Asus's end, because they'll always get whiners.
If you're not part of the solution then you're part of the problem. I posted a solution for those that are bothered by the redesign. If you don't like it I'm not asking you to, but whining about what asus did or didn't do isn't doing anything to keep your microsd card from falling out.
So as far as I'm concerned this is off topic
newellj79 said:
Unless I misread the op, he isn't saying to cut your microsd card, but rather the dummy card that came with your prime.
Click to expand...
Click to collapse
my bad I read too fast. Your correct. But I justdon't want anyone to try this on their real sd cards.
Sent from my ADR6300 using xda premium
ickkii said:
you clearly don't know how much of a ***** it was to get the microsd card out of the original transformer, you had to take a knife and press the back of the card to get it spring out.
In fact, the reason they probably designed it this way was because of complaints like this one in an attempt to satisfy everyone.
Big mistake on Asus's end, because they'll always get whiners.
If you're not part of the solution then you're part of the problem. I posted a solution for those that are bothered by the redesign. If you don't like it I'm not asking you to, but whining about what asus did or didn't do isn't doing anything to keep your microsd card from falling out.
So as far as I'm concerned this is off topic
Click to expand...
Click to collapse
Yeah so I guess the 4 threads or so on this topics & 3-4 different hacks to keep the card in place & the many people who reported losing their cards means there is no problem.
I would take a flush - yes FLUSH fit - any day like they are designed to be like other phones & cameras & GPS units & mp3 players and.... hell a recessed fit that requires a fingernail is better than this setup.
Look at the numerous flaws in this tablet.... you really think this non recessed or flush card was possibly on purpose?? Bah they did not get certain critical aspects right - GPS & wifi - you think they sat around and decided this was a better setup than the tf101? Having it stick out of the case??
I'm not whining .... I'm countering the farce of a belief that 1. This isn't a design flaw and 2. Making a home made wedge isn't a hack to fix a design flaw.
Lock-N-Load said:
Yeah so I guess the 4 threads or so on this topics & 3-4 different hacks to keep the card in place & the many people who reported losing their cards means there is no problem.
I would take a flush - yes FLUSH fit - any day like they are designed to be like other phones & cameras & GPS units & mp3 players and.... hell a recessed fit that requires a fingernail is better than this setup.
Look at the numerous flaws in this tablet.... you really think this non recessed or flush card was possibly on purpose?? Bah they did not get certain critical aspects right - GPS & wifi - you think they sat around and decided this was a better setup than the tf101? Having it stick out of the case??
I'm not whining .... I'm countering the farce of a belief that 1. This isn't a design flaw and 2. Making a home made wedge isn't a hack to fix a design flaw.
Click to expand...
Click to collapse
We get it, the device isn't perfect. Are you done with first world problems or would you like to keep speculating that Asus is sitting around a table trying to think of ways to **** you out of 500 dollars?
Just saying, none of this is going anywhere.
Its not a design flaw, the microSD card slots was intentionally designed so that the cards sticks out a millimeter in order to make it easy to get out.
The people who have had problems with their cards popping out (I saw about a half dozen people complaining of this problem, not dozens) probably just need to be a little more careful with their device. The Prime is relatively fragile, you shouldn't just toss it into a book bag or something.
I have had a microSD card in the side if my Prime for over 4 months now and it has fallen out or been accidentally ejected a total of zero times.
This is a situation of one or two people experiencing an issue and then everybody jumping into the ***** pool to complain about it.
almightywhacko said:
Its not a design flaw, the microSD card slots was intentionally designed so that the cards sticks out a millimeter in order to make it easy to get out.
The people who have had problems with their cards popping out (I saw about a half dozen people complaining of this problem, not dozens) probably just need to be a little more careful with their device. The Prime is relatively fragile, you shouldn't just toss it into a book bag or something.
I have had a microSD card in the side if my Prime for over 4 months now and it has fallen out or been accidentally ejected a total of zero times.
This is a situation of one or two people experiencing an issue and then everybody jumping into the ***** pool to complain about it.
Click to expand...
Click to collapse
same here. never has come out.
most of those complaining are likely paid Apple / Moto / xxx shills trying to discredit.
So sad that kind of bs happens but when money is at stake, all bets are off.
Sent from my Transformer Prime TF201 using Tapatalk
Guys, do you know if it's possible to install an internal microsd holder connecting it to the usbpin of 30pin connector?
zooster said:
Guys, do you know if it's possible to install an internal microsd holder connecting it to the usbpin of 30pin connector?
Click to expand...
Click to collapse
No , the chasis is so slim to carry an internal 3rd party micro sd reader , but you can buy external usb hub with sevral ports and use card readers , or buy the official micro sd card reader from samsung
But it's still possible to use the internal connector and slot, ready for the microsd holder.
This is the holder:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And below is the mainboard of the tab
Where is that from, where can you get it etc... I'd pop my tab open if I knew I could do that to it.
Sent from my GT-N7000 using Tapatalk 2
Search on ebay: p7500 memory holder
The only problem is the missing connector on the mobo. It's the same as the one of jack3,5 and similar.
You have to find that micro connector and then airsolder it on the mobo, hoping that is not missing also some resistor around.
Ahh, looked at the image again, I thought it was a zif socket, so on second thoughts, soldering components to my tabs mobo is beyond my capability. Shame really, I would probably pay to have it done if there were a place capable of doing it for me.
Sent from my GT-N7000 using Tapatalk 2
Thank you for the awesome nudge in this direction! I am going to take a stab at this and I will report back.
I bought one of the SD holders on ebay, took my tab apart to verify the original idea-- while the card reader will fit in the place circled in the photo above, I don't think that it is going to be ab absolutely perfect fit. Again, I will report on what it takes.
As to the 10 pin connector, I believe that I have found the correct parts. I ordered some a few days ago, and they should be here by the 24th. I will know for sure then, and share the part number if I got it correct. If anyone else wants to hunt for them though, they are known as board to board connectors, as well as mezzanine connectors by some manufacturers.
Although they are SMD, they should be just barely large enough to solder with a real iron, a hot air rework station would be awesome, but I have been doing SMD work/rework with a normal iron for years. It takes lots of magnification, a steady hand, and tweezers, but ultimately it can be done.
The only big question I have, is where did these SD readers come from originally-- it say's p7500 on the silk screen on the reader, but as far as I can tell neither the 7500 or 7510 ever came with external SD... hopefully it will be plug and play, but I am going to refrain from hacking my tab's back up until I verify it does work.
Thanks again for the idea!
Later,
Jason
Good luck with that, I'll look forward to hearing how you get on.
You're welcome mate, please post the link where you have found the 10pin connector and let me know if my find was workable.
Cheers
Sent from my GT-P7310 using XDA
zooster, I will happily post the part number once I verify it is the correct one. I don't want to put it out there, have it be wrong, and then have people upset with me. I also ordered both the "male" and "female" halves, mostly because the connector is kind of a "hermaphrodite", I suspect the half we need is the male half, but the manufacturer drawings are the same for both plug and receptacle (go figure, stock drawings...), so I ordered both. The part I am hoping is correct is from Molex, and part of their "slimstack" series. That and measurements will get you to where I am at ATM, or PM me and I will let you know number, or just wait for Tuesday and I will let you know.
There are literally dozens if not hundreds of similar style connectors out there, so this is kind of a best guess right now. It does seem like this style is somewhat standardized anymore, so hopefully there are a lot of manufacturers simply making the same things. Seeing as Molex is one of the worlds largest supplier of interconnects, it is a pretty good starting point.
So far I am out about $20, and I have poured more money down the drain after other projects that didn't pan out, so bare with me and I'll let you know what happens.
Later,
Jason
Very very interesting and I'm looking forward to hear about you're results.
Small question the pictures above show.the 3g model, right? I think I can figure out the Sim slot left from the possible sd reader slot.
I have the wifi one, how the hw mod will work there too.
Sent from my GT-P7510 using XDA Premium HD app
I don't know about the pics, those are zoosters. The picture of the back side of the tab though is named p7500-- so maybe. All I can say, is that I took mine (GT-P7510) apart again a few days ago, and it looks virtually identical to the pic. I didn't hold the tab next to the monitor and compare-- but it looks like it has the same amount of room along the top as the one in the picture.
The reason I said that it didn't look like it was going to be 100% drop in, is that the card reader does not sit flat in the area marked. In fact, there is a small foam pad with a silver jacket right below that spot, the card reader was on top of that. I removed it, and it still did not lie quite flat. Definitely not like any of the other assorted little components in there that are not retained by any kind of screws or adhesive, just a form fitting cavity. My instinct is that there is going to be a bit involved in getting the card reader to stay in place. The other challenge was that it appeared it might sit to far inside the case to be able to easily insert and remove cards. You are of course limited to the layout of the parts that are there, so there is not a lot of room to come up with a better mounting scenario. So, first and foremost we need to see if even when populated, if the reader works. If it does, then I will move on to trying to figure out mounting solutions.
Later,
Jason
johho said:
Very very interesting and I'm looking forward to hear about you're results.
Small question the pictures above show.the 3g model, right? I think I can figure out the Sim slot left from the possible sd reader slot.
I have the wifi one, how the hw mod will work there too.
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
If it's not 3g, the sim holder, although correctly inserted, will be unuseful
Sent from my GT-P7310 using XDA
jacampb2 said:
The other challenge was that it appeared it might sit to far inside the case to be able to easily insert and remove cards.
Click to expand...
Click to collapse
I'm following this with interest too.
Is the SD card slot spring loaded? If it's going to sit too far inside pop some tape on the front and back of the sd card so that the two pieces stick together and give you a tab to pull on.
I do this to my camera memory cards so that I can keep track of different cards when I'm out shooting.
Yes, the card slot is spring loaded-- at least the one that I got is. I like the tape idea though, if worse comes to worse, that might be a solution. Now I wish I had snapped some pictures when I test fit this the other day. I didn't think about it, was just excited to see if it was going to really be possible. The thing is, it looked to me that it might be more than just a little to low in the position it appears to go. I say "appears to go" based on the original picture, and the length of the flexible printed cable. There is a certain alignment/orientation that has to be with what there is to work with. I can't really explain it any better than that, but hopefully you guys understand.
It is certainly possible that it is just the looks that are deceiving, but like I mentioned earlier, I am going to verify working hardware before I deal with making it accessible and stably mounted.
I sure might be dense, but where is the sim card slot in the original pictures? zooster, would you mind circling and uploading again? Or just a good description. I thought that it was supposed to be right next to the SD holder, but I must be missing it if that is the case.
I did find that these SD card holders were *only* in the pre-release/testing p7500's. I found a very few pictures of the units in tact online. It would be awesome if anyone with the development tab and the SD slot would shoot some internal pics for us!
Thanks,
Jason
---------- Post added at 01:48 PM ---------- Previous post was at 01:25 PM ----------
NM on the sim card reader location. I just figured it out. Found a Utube video of a tech tearing down a p7500 because the owner stuffed an SD card in the sim card slot
Anyhow, I'm thinking the tab in the picture on the first page might be a p7510 as well. You can see that there is no flexible printed cable coming from under the metal cover that holds the sim reader in place. I also am quite sure that my tab had that cover as well. That cover might be the solution to mounting the SD card reader. Dollars to doughnuts they used something similar to that, if not the exact same as that one to hold the SD card reader in place.
I'm so excited I could squirt! I am really looking forward to UPS tomorrow or tuesday.
Later,
Jason
Yes it is a 7510. As you figured out the sim card holder is located at the top left of the picture behind the metallic grid.
Pay attention in soldering without an air station solder, you could destroy pads and tracks.
I'd say that the holder with the cable fits 99% the slot, the pads for microzif connector are a the right distance, the only one remaining doubt is if you are able to solder it safely and correctly, and if it will just work. My concern is only about the possible lack of some resistor in the connection with the chipset.
Sent from my GT-P7310 using XDA
I am going to be paying close attention to this thread, I am interested to see the results. I am interested in this even if the micro sd was not accessible from the outside of the device. I would just pop in a 32GB card and let it stay there.
Having 48GB of storage on my tab would be sweet, especially if a good working Ubuntu port becomes available!
No joy guys, connectors were right, soldering was a *****, but went ok. Installed card and nothing, tablet doesn't seem to recognize it at all, so either disabled in the software, or it needs more than just the connector. In the pics you can see where they're is a large unpopulated area next to the sd card connector. i think we need a service manual, or someone top get values from one of those rare pre release tabs...
Sorry for the bad news, I'm going to bed, midnight shift tonight...
Sent from my DROIDX using Tapatalk 2
jacampb2 said:
No joy guys, connectors were right, soldering was a *****, but went ok. Installed card and nothing, tablet doesn't seem to recognize it at all, so either disabled in the software, or it needs more than just the connector. In the pics you can see where they're is a large unpopulated area next to the sd card connector. i think we need a service manual, or someone top get values from one of those rare pre release tabs...
Sorry for the bad news, I'm going to bed, midnight shift tonight...
Sent from my DROIDX using Tapatalk 2
Click to expand...
Click to collapse
Maybe someone needs to write the drivers for it. Are you sure it's getting power as well?
Well, don't loose hope. Yes, there could be some resistor or some bridge to be shortened, but I think that the problem could lie somewhere else.
The tab has already a "sd", it's the internal one. Maybe it cannot see 2 sd at the same time. So we should swap from the internal one to the external or turn the internal sd into internal storage. Or maybe there is some flag in the software to enabled.
Maybe a porting of the firmware of the new tab, with sd slot, will help.
Btw did you check with a tester if the soldering has gone fine?
Sent from my GT-P7310 using XDA
I was all set to order a Meenova Dash Micro and 32/64GB MicroSD card to use with my N6 on the go. I don't thinkI will fill up my 32GB phone unless I purposely try to but I would like to keep something with me to use for the purposes of Nandroid backups and to hold Music and HD video content but not have it be ON the phone. Also a folder with all the ROM, Kernel, Modem files etc would be nice too.
Anyway I was all set to order the items I needed when I found this:
http://www.bestbuy.com/site/sandisk-ultra-dual-64gb-usb-2-0-micro-usb-flash-drive-black/3814107.p?id=1219093905210&skuId=3814107
Has anyone use one? Looks like its going to be bigger but I didn't intend to use the Meenova while It was plugged into the phone and I would be paranoid about breaking the Micro USB port on my phone. Hell, I don't like to use my phone while it's plugged in even.
As the only time I will most-likely use something like this is for a quick file transfer, backup or listening to music while the phone is say sitting on a table I guess the size isn't super important. So if anyone has used one on the N6, how are the transfer speeds? Build quality of the flash drive etc.
I know the Meenova got rave reviews so should I still with that or get the Sandisk USB/Micro drive? The big thing I like about the Sandisk is no needed adaptors or cables to do file transfers. I can pop it into my MacBook Pro or Windows desktop, copy to it via standard USB port and then pop it into my N6 without having to go find missing part or a cable.
Thoughts? Suggestions? The reason I wanted the Meenova Dash Micro was due to its small size which is still very appealing. My local Best Buy has the Sandisk 32GB for $17.99 and the 64GB for $29.99, I could pick one up when I drive by afterwork today but with the Meenova I have to order it and then still get a 32GB or 64GB MicroSD card which the two together will cost more.
Thanks!
I had that exact one and I hated it. Its cheaply made and felt like it would break. I bought it on amazon and returned it. I bought a corsair one instead and its far superior. It has a USB 3.0(PC side) and micro usb (phone side) and is all metal. Here's a link to it
http://www.amazon.com/gp/aw/d/B00HV...418389449&sr=8-1-spell&pi=AC_SX110_SY165_QL70
Pilz said:
I had that exact one and I hated it. Its cheaply made and felt like it would break. I bought it on amazon and returned it. I bought a corsair one instead and its far superior. It has a USB 3.0(PC side) and micro usb (phone side) and is all metal. Here's a link to it
http://www.amazon.com/gp/aw/d/B00HV...418389449&sr=8-1-spell&pi=AC_SX110_SY165_QL70
Click to expand...
Click to collapse
That Corsair definitely "look" higher quality even just from the pictures. I guess the the reason I was looking at the Sandisk was because it's in-stock at my local Best Buy at $17.99 for the 32GB or $29.99 for the 64GB. The Corsair Flash Voyager GO is almost twice the price. I do like the fact that the Corsair Flash Voyager GO is metal though.
I may just go with my original plans to get the Meenova if no one has any positive things to say about the Sandisk.
Now that you mention it, I've got a few Sandisk 4, 8, 16 and 32GB flash drives and they are very plasticy and I've broken a couple too. Although that is because I've had them sticking out of my MacBook Pro when I was using it on my lap or moving it and I hit one on something so I suppose in that case anything could break. Better then Sandisk flash drive though and not the MacBook Pro USB port!
kdoggy said:
That Corsair definitely "look" higher quality even just from the pictures. I guess the the reason I was looking at the Sandisk was because it's in-stock at my local Best Buy at $17.99 for the 32GB or $29.99 for the 64GB. The Corsair Flash Voyager GO is almost twice the price. I do like the fact that the Corsair Flash Voyager GO is metal though.
I may just go with my original plans to get the Meenova if no one has any positive things to say about the Sandisk.
Now that you mention it, I've got a few Sandisk 4, 8, 16 and 32GB flash drives and they are very plasticy and I've broken a couple too. Although that is because I've had them sticking out of my MacBook Pro when I was using it on my lap or moving it and I hit one on something so I suppose in that case anything could break. Better then Sandisk flash drive though and not the MacBook Pro USB port!
Click to expand...
Click to collapse
I got my 32gb for 14.99 last week so just watch the price on it. I've broken some sandisk ones as well and I prefer metal because its on my keyring. The read and wrote speed is also faster than my sandisk was.
Pilz said:
I got my 32gb for 14.99 last week so just watch the price on it. I've broken some sandisk ones as well and I prefer metal because its on my keyring. The read and wrote speed is also faster than my sandisk was.
Click to expand...
Click to collapse
I got this one http://www.amazon.com/gp/product/B00L6M1H1C/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
USB 3.0, very high quality and great rubber caps on each side. For me, i transfer movies and things a lot so the USB 3 makes that very very fast from the PC.
mallman said:
I got this one http://www.amazon.com/gp/product/B00L6M1H1C/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
USB 3.0, very high quality and great rubber caps on each side. For me, i transfer movies and things a lot so the USB 3 makes that very very fast from the PC.
Click to expand...
Click to collapse
It looks nice, I'm happy as long as it made well and I can't use it with my case on my phone. I keep all of my TWRP backups on there. I have a 64gb Nexus but I don't like to waste 12gb on my phone for 3 backups.
Here's a picture of mine next to my Motorola Keylink for a size comparison. (I'm at school so don't mind the dirty table here in the IST bldg)
I know the OP doesn't want to use a cable but since the dawn of time I've used an OTG cable: http://www.amazon.com/StarTech-com-...8&qid=1418397278&sr=8-1&keywords=OTG+microusb
I always found it far more adaptable to my situation. Also you can get a larger choice of high quality drives at a lower price.
$5 and whatever memory stick you have/find/borrow/buy. Too simple.
Ok thanks for the suggestion guys!
Btw, lol my dirty table beats your dirty table!
Sent from my Nexus 6 using Tapatalk
Dusty Rhodes said:
I know the OP doesn't want to use a cable but since the dawn of time I've used an OTG cable: http://www.amazon.com/StarTech-com-...8&qid=1418397278&sr=8-1&keywords=OTG+microusb
I always found it far more adaptable to my situation. Also you can get a larger choice of high quality drives at a lower price.
$5 and whatever memory stick you have/find/borrow/buy. Too simple.
Click to expand...
Click to collapse
I have the same adapter and it works well. I use it for my Nexus Player. It has plastic that covers/protectors the two ends while shipping and it makes it look scratched until you remove it. Its a good adapter if you don't mind using one.
kdoggy said:
Anyway I was all set to order the items I needed when I found this:
http://www.bestbuy.com/site/sandisk-ultra-dual-64gb-usb-2-0-micro-usb-flash-drive-black/3814107.p?id=1219093905210&skuId=3814107
Thanks!
Click to expand...
Click to collapse
i cant see the link for some reason but are you speaking about the sandisk that has a micro usb on one side and a full size usb on the other with a sliding cover to cover the ports?
if so i have the 64gb version and contrary to others i have used it across the nex9 and nex6 and htc one max.
i have had zero issues with the gadget and recommend it if you are use to sandisk. people have their own opinions on everything and ones mileage will vary, but i disagree that its cheap and prone to break. one may LOSE it (its tiny) before they break it, just depends on how you handle such products.
i love it, have used it for months and recommend it.
Yes that it's the one.
Sent from my Nexus 6 using Tapatalk
marctronixx said:
i cant see the link for some reason but are you speaking about the sandisk that has a micro usb on one saide and a full size usb on the other witha sliding cover to cover the ports?
if so i have the 64gb version andf contrary to others i haveused it across the nex9 and nex6 and htcx one max.
i have had zero issues with the gadget and recommend it if you are use to sandisk. people have their own opinions on everything and ones mileage will vary, but i disagree that its cheap and prone to break. one may LOSE it (its tiny) before they break it, just depends on how you handle such products.
i love it, have used it for months and recommend it.
Click to expand...
Click to collapse
My cover broke in less than a week which is partly why it went back to amazon. It also was annoying to use with a case without a OTG cable. I didn't abuse it, in fact it sat on my desk when I wasn't using it. I could've had a defective one but it didn't feel sturdy at all which later proved correct when the cap broke. My USB (fill sized end) was angled weird too but again I think I could have had a bad unit.
I have the 32gb sandisk dual drive for my moto g. It is a great product for its price. I can safely suggest it to anyone who considers to buy it.
kdoggy said:
Yes that it's the one.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I think you should go for the Kingston micro-duo otg pendrive usb 3.0 .It's very small and made of metal and the read and write speed is also quite fast.
Has anyone tried plugging the dual port sticks into the phone and computer at the same time?
zekesamas said:
Has anyone tried plugging the dual port sticks into the phone and computer at the same time?
Click to expand...
Click to collapse
That would be difficult because the nexus port is slightly angled so it would require some work.