Hi!
I managed to Root my Hero (GSM) , and flashed both radio and rom via cyanogenmod 1.4 updater ( home key while turning device on , used the update.zip method ).
The updates were successful, but now my device doesn't start correctly.
It is stuck in the boot sequence animation.
Tested several radios , and for now 2 roms (villain 5.22 and vanilla 2.1 1.0jit ).
Last one is trying to boot for about 20 minutes now, but nothing happens other than the animated android.
what have i done wrong?
any suggestions?
this is my first android device, i previously used windows mobile devices since 2003
but i think wm's time is over ^^
Usual things when its not booting.
- Make sure you wiped before flashing
- only flash one thing at a time and boot in-between
- if after 20 mins still not booted then remove battery, put back in and boot again.
Try each of these in order and see when it starts to work, my guess is after you wipe it will work fine.
Related
I flashed EDT FlagshipV4 yesterday, and it was working fine until I changed the lockscreen and tried it out, but right as I pressed the sleep button the phone just shutdown. I booted the phone up again and the EDT animation played and the phone looked like it was ready to go (could move the homescreen and such). However, as soon as the media scanning thing was done, the phone would reboot and this would happen over and over again. During each reboot the phone vibrated in a specific pattern.
Now I'm pretty new to Android, so I did a battery pull, booted it to recovery and proceeded to flash the phone to the Trigger 2.2.1 zip I had on the SD card and the booting issue stopped. Can anyone tell me what went wrong with my phone? I'm hoping that it wasn't Flagship, because I really like the look of that ROM. Thanks!
Did u flash a new lock screen or just change to a different one via settings/display? If u flashed a new lockscreen sometimes the system files aren't the same as the Rom which cause it to do so.
Currently running ______________! (
Haven't had any issues with that rom, you must have flashed an incompatible framework for lock screens. If you haven't, I'd download the rom again and reflash.
Hello!
I have a strange problem with my phone it wont update to latset firmware without get in some kind of boot loop.
The phone was runing the lastest firmware 1232.5962.1314.0017 before the problems started, it all started when some systems apps like camera, settnings, messeging. etc, stop working. All that showed up when entering the apps was a black screen say something like "reconnecting" and then it jumped back to home screen.
So I restarted the phone but then went in som kind of reboot loop where it wouldent go past the nokia logo. I tried everything soft reset, hard reset. The last thing I tried was to reflash the phone, I tried diffrent ROMs and it finaly worked with the ROM 059Q5C6 RM-821 GLOBAL BLACK SWAP.
The phone is runing now and almost all functions work exept camera and automatic brightness (all that I discoverd so far).
Its currently running the 1231.5951.1249.1004 firmware.
But like I said now when I try the update the phone it goes to the same boot loop state.
What should i try next?
Is the thread in the right place?
Strepsil said:
Hello!
I have a strange problem with my phone it wont update to latset firmware without get in some kind of boot loop.
The phone was runing the lastest firmware 1232.5962.1314.0017 before the problems started, it all started when some systems apps like camera, settnings, messeging. etc, stop working. All that showed up when entering the apps was a black screen say something like "reconnecting" and then it jumped back to home screen.
So I restarted the phone but then went in som kind of reboot loop where it wouldent go past the nokia logo. I tried everything soft reset, hard reset. The last thing I tried was to reflash the phone, I tried diffrent ROMs and it finaly worked with the ROM 059Q5C6 RM-821 GLOBAL BLACK SWAP.
The phone is runing now and almost all functions work exept camera and automatic brightness (all that I discoverd so far).
Its currently running the 1231.5951.1249.1004 firmware.
But like I said now when I try the update the phone it goes to the same boot loop state.
What should i try next?
Is the thread in the right place?
Click to expand...
Click to collapse
Same thing happens to my phone!! Did not think that it could be the latest firmware (1308 for me) could have caused it since I don't think there are a lot of us affected by it and my phone has been running fine for months after the update! I've restored 5 times, by the time I thought to flash it, it wouldn't charge anymore.... I'd sent mine for repair now... Have you fixed yours?
After I stilled root and xposed with TWRP for this post: https://forum.xda-developers.com/honor-8/development/twrp-t3566563 , it worked fine, but after I tried installing a different type of root, xposed framework stopped working as it should. I tried using a backup of complete stock, but when I booted the device with the restored backup, it was like only half of the ROM was restored. I was missing muliple of stock apps, and thos that was there didn't work. Not even settings.
Then I did my attempt at flashing the stock EMUI with the "dload" folder method. But every time I try it just says "Update Failed".
As I last resort I went to custom ROM's cause I need a device with basic Internet and phone supper atleast. But when I flash ANY custom ROM, it just reboots a few times and the screen stay black. It's like the device is still on, and I know this because when I plug it in my PC in this stage, windows gives out a unknown device plugged in.
I have been trying and googeling for the past two days. And I really am lost...
I apriciate any attempt to help me!
So, to begin with, yesterday Mi A1 got the Android 9 update. As I always do, I went to uptade it with Magisk (it worked with 8.0 to 8.1 and with every security patch, so I, as a newbie, thought, "why the h3ll not?"). Obviously, it didn't work and I got into a boot loop. So, here are the [lot] of things I have tried to do.
-Downloaded MiFlash and the latest OS version from Xiaomi site (8.1 witch november patch). Tried flashing a lot of times, I always get the boot loop after installing it. Wiped all data with TWRP and still didn't work. Always the same problem. Tried with different versions as well.
-Downloaded latest AOSP ROM for the device, flashed it, wiped cache and data, instaled TWRP (3.2.3-0), but the system never initiates. Doesn't even restart (20 minutes after my last try and it still is in a black screen).
-I've tried the same thing with Lineage 15.1 as well. Checked with MD5 in both roms. Doesn't work at all. Followed every tutorial I could, step by step, don't know what I'm doing wrong.
Can any one please help me? I don't know what to do anymore.
EDIT 1: So, I thought nothing happened, but after installing AOSP, I rebootet the phone holding the power buton, and during boot, I can see the "Powered by Android" from the custom ROM for a few seconds, but then the screed turns black and nothing more happens.
Hi, I'm trying using LOS 16 ROM. After I try and I succes.
But I decided to use the official ROM.
Before that I already Backup Full (All options checked using TWRP)
When I restore there's no problem, but once reboot to system I get bootloop in Pocophone logo + unlocked words (Booting - Off - Booting - Off).
Okay, so I try restore it again, now it got past the pochophone logo but it stuck in Pocophone logo + loading screen (where 3 little dot and android words on bottom)
Can someone tell me where I'm wrong?
Closed
Okay, so i try to restore it for the 3rd time while waiting reply there.
And it succed, no bootloop.
(from the 1st restore till 3rd restore i didn't do anything different. Only restore from TWRP. So strange, but at least i got my phone back)
Only the pattern password suddenly got wrong when obviously It's no way to be wrong. Since i have 3 phone and all patern is same :/
I just need to wipe data now. :silly:
seems like /data decryption error
never jump between Miui and LOS roms frequently! miui changes alot of things including OEM (vendor) partitions in latest miui10.2.3 rom! which usually gives BOOTLOOPS and TWRP also CANNOT flash any rom!