I want to flash the phone. The company is Centennial in Puerto Rico the only thing i know is that is a gsm phone. If I do the RUU with the files arround doing the goldcard process, the APN setting will be gone?
see my original answer and stop being lazy...
You can check the apn settings now dude just write them down and flash!
Settings > Wireless Controls > Mobile Nework Settings > "Acces Point Names"
Just click the one with the green checkmark, write down all the settings and enter them the same way after flashing.
P.S. I don't know if this is the right section to post this dude
Related
Hi,
I upgraded OS from 3.17 to 4.00.05 , everything is fine, but i cant change stupid settings in phone app ...
when someone dialing to me the number shows like this:
(50x) 333 333
on older os it was :
50x333333
how to change it back to old settings?
HELP! i cant find any option!
seems I am not the only one having that sort of problems ...
(hehe, witam w klubie szczesliwych uzytkownikow WM2003...)
I have been asking the same question few days ago and see solutions I've got at that time:
http://forum.xda-developers.com/viewtopic.php?t=4528
tell me if you have any luck
regards, monika
At the contacts screen select Tools > Options, then select your region.
Also make sure you region is set correctly in Start > Settings > System > Regional Settings
I have made advised changes in the system ....
even soft reseted my XDA and I still get for my local telephone sth like that in my phone book
+4(822) 636-xxxx
48 - country code
22 - area code
636xxxx - phone number
:? it is not funny
regards, monika
Fixed...
I fixed it ... but .. i dont know how , just changed connection settings now works without any () and prefixes
Monika , if i find any way how i did it , i will tell ya
Re: Fixed...
Grooby said:
I fixed it ... but .. i dont know how , just changed connection settings now works without any () and prefixes
Monika , if i find any way how i did it , i will tell ya
Click to expand...
Click to collapse
that is the thing I DO APPRECIATE very much as I still have that weird looking phones setup in my phone book ... still without luck
maybe if you put step-by-step kind of information on how your connection settings look like ...
regards, monika
clciik start....
settings...
conections tab
hit connections
hit the advanced tab
click slect location
make sure use dialling rules is unticked
if it aint that then tick use dialling rules and put it onto mobile then press ok
hope this helps you
gaz
unfortunately I did not help ... it still looks like previously
go into the mobile tab thing and click edit
change country code to your one (you cant put + in this bit)
also do your area code.
click dialing patterns
change all the boxes to
+EFG exactly how i typed it
then try if nothing still press contacts button
then tools>options...
change the area and region code things in there.
if nothing still working
start> settings>system tab
then click on regional settings and slect the right country and all.
if nothing still then god knows lol
being given a hermes but it is AT&T branded.... it will obviously come without sim and I need to unlock it so can be used on TMO..... will I still be able to do this by connecting it by usb and using the v3a unlocker? Also if there is anything else I should no that I may have missed roaming the threads please let me know.... I currently have an excalibur so am pretty familiar with modifying things.
all gsm phones comes with a sim of sorts
he's being given the phone, so the person giving it to him is probably keeping the simcard?
you should be able to unless the unlocker states otherwise..
the phone is fully functional (bar the phone/texting) without a simcard as its a PDA / Phone
kingsizeriz said:
he's being given the phone, so the person giving it to him is probably keeping the simcard?
you should be able to unless the unlocker states otherwise..
the phone is fully functional (bar the phone/texting) without a simcard as its a PDA / Phone
Click to expand...
Click to collapse
Ok just making sure... also I could not find USA tmobile settings for once it is unlocked to get everyhting working right. I know there is special settings for the excalibur to get MMS and sms working properly so I would assume that hermes would be the same.
I found the keyboard fixes as mine is an 8525(cingular) but I want everything to work right.... If I missed it just link where I need to go for US tmo setup.
I dont mind doing the reading... THANKS!!!
PS..... Obviously I will be changing ROMS too
Is it the same as excal....?
Here are the steps and settings:
Step 1. Setup GPRS connection for T-Mobile network:
Start > Settings > Connections (tab) > Connections > Advanced (tab) > Select Networks > New...
Enter the name for the profile (e.g. T-Mobile), then go to "Modem" tab and click "New...", enter name for the connection (e.g. T-Mobile Data), choose "Cellular line (GPRS, 3G)" in the drop-down menu, click "Next", the access point should be "wap.voicestream.com", click "Next", leave all fields blank on this page, click "Finish". Now go to "Proxy Settings" tab and select "This network connects to the Internet".
Click "Ok" all the way out.
Step 2. Setup MMS:
Start > Programs > Messaging > Menu > Tools > Options... > MMS > Servers (tab) > New
Server name: (you name it)
Gateway: 216.155.165.50
Port Number: 8080
Server address: http://216.155.174.84/servlets/mms
Connect via: (the connection you created in step 1)
Sending size limitation: 300K
WAP Version: WAP 2.0
Click "Ok", set this new entry as default (with a red arrow on the icon).
check out HTC Network Wizard (comes precooked into most roms now..) if not then schaps operator setup
does the leg work for you
Similiar to the excal 6.1 roms then.... I am reading all the new roms now so trying to decide where to go first LOL.... seems all have good and bad... I'll keep wading through them
I am currently using the Android Desire rom V4 and i need to manually turn on my APN... I dont know how to please someone help
ASK IN THE ANDROID THREADS FFS,
sick of these Android questions today
download & install "text edit" app on phone and open file system/ect/apns-conf.xml and change apns "6" to "8" and hit the phones menu button to save changes.
Go back and open the Network APN setting screen and now hit the phones menu button again and you should now be able to add a new APN.
Will someone PLEASE explain to me how i get Vodaphone GPRS to work on WM6.5?
When i insert the Sim it detects it as a BPL sim and it fails to automatically get the settings,i've tried connection manager AND IT JUST CRASHES upon launch
If i have to input the settings manully will someone please direct me in a gprs-for-dummies kinda way?
Solution
Hi bro here's the setting
Frist goto
Setting than connection and tap on connection
Then u will find advanced option below tab it
Then select new
Give name as vodafone
Then tap on modem and create new
Name it vodafone then select cellular line (gprs) than next
Then give access point name as
portalnmms
Then next and finish leave user name and password blank
Now select proxy setting below
Check on both the box
Give proxy server as
10.10.1.100
Now select advanced
Than select http
Edit server as above and port as
9401
Also configure for wap;secure wap and socks as the above way
Then tab ok and you are done
Hey,
I have two apn's:
-> MMS
-> MMS/Internet
i've managed to let android let me choose the APN which i want, but to go to the menu i have to do a lot of clicking.
My question is: Anyone noes how to create a shortcut to go directly to that sub menu?
Thanks in advance.
Regards,
emans
Check this.
thanks.
I dug a little and i found this: APN Settings Shortcut, but i dont know if it is safe..