Will someone PLEASE explain to me how i get Vodaphone GPRS to work on WM6.5?
When i insert the Sim it detects it as a BPL sim and it fails to automatically get the settings,i've tried connection manager AND IT JUST CRASHES upon launch
If i have to input the settings manully will someone please direct me in a gprs-for-dummies kinda way?
Solution
Hi bro here's the setting
Frist goto
Setting than connection and tap on connection
Then u will find advanced option below tab it
Then select new
Give name as vodafone
Then tap on modem and create new
Name it vodafone then select cellular line (gprs) than next
Then give access point name as
portalnmms
Then next and finish leave user name and password blank
Now select proxy setting below
Check on both the box
Give proxy server as
10.10.1.100
Now select advanced
Than select http
Edit server as above and port as
9401
Also configure for wap;secure wap and socks as the above way
Then tab ok and you are done
Related
hi friends
I have sx56 att upgraded wm2003.
I have taken services for gpras and tried to setup in my sx56.
following are the details of gprs settings that my mobile career provided me.
+++++++++++++++++
1. start -> setting -> connection -> tap-connection.
2. under internet setting .... choose "my work network " -> add new modem.
3. tap "general" and connection setting name as "XXXXXXXX"
4. enter connection name as "XXXXXXXX"
5. select "cellular line gprs".
6. by tapping next --- given APN "XXXXXXXXX".
7. user name and password keep blank and tap finish.
8. again go to connection -> manage existing connection -> select proxy setting
9. tap on both the block and go to 'advance' ... in first window write URL and and in WAP setting enter "xx.xx.x.xxx" - 9201. -> tap ok.
10. from the desktop -- tap coverage tower and connect using "XXXXXX" connection.
+++++++++++++++++
ok all the above setpes are done by me and I am able to establsih connection.
I have also checked by command prompt and checked ipconfig details.
I found all assigned ip and dns in it.
the problem is I am not able to open any site in IE browser and page processing shows loading.
can anybody tell me what can be the problem.
thanks
GPRS
Hi All
I have similar problem
I just unlocked my ATT phone using the Wizard
WorKs flawlessly except the Calendar and dTree both end up in German
Is there any fix
The other problem is GPRS
Gprs connects to provider the problem is I am not able to open any site in IE browser and page processing shows "The page you are looking for cannot be found"
can anybody tell me what can be the problem.
Great Forum
Thanks
Maynard
gprs
I just unlock my phone using the xda-developers serv 1.2exe and after that use a upgrade rom and radio from siemens to wm2003
my radio is a.33.02 and the rom version is a.20.09 ENG
and is working beautifull
i have the upgrade if anyone want it but can upload here i tried
send me a pm with email address
Hey everyone.....
I'm a newbie so please be gentle....
I've had my phone for about 2weeks now. Last week I got it unlocked but now I'm having problems with the wap connection from fido.
Here is what I have.
t-mobile xda with fido sim
running xda-developers special edition rom v1.2
rom ver: 3.17.03 eng
rom date: 05/15/03
radio ver: 6.24.00
Protocol: 324e4
I talked to fido and they told me that because I am on prepaid they don't offer GPRS but I can connect to wap ??? I am still learning about the two, but I don't think you need to have both, but I could be wrong. anyway I talked to them and they enabled mms and wap on my account about 3 days ago so I should be able to access it by now.
here is the information they gave me.
APN: wap.fido.ca or internet.fido.ca
IP: 205.151.011.011
user: fido
pwd: fido
port: 9201
#: *99#
so I've tried multiple combinations of the above but nothing seems to work, can anyone tell me if they have had any luck getting connected with fido prepaid and how you did it.
Here is what I tried.
settings --> connection --> connections
new...
under general --> change name to wap settings
under modem --> new...
rename to wap
select a modem --> tried both celluar line
--> clicked advanced left port settings
--> TCP/IP settings
--> select use specific IP address
--> entered 205.151.011.011
--> also tried use server assigned IP address
--> Name servers
--> select use specific IP address
--> entered 205.151.011.011
--> also tried use server assigned IP address
clicked OK to accept advanced settings
clicked NEXT
--> left country code blank
--> left area code blank
--> entered *99# for phone number
--> also tried wap.fido.ca for phone number
clicked FINISHED
clicked PROXY SETTINGS
--> selected this network connects to the internet
--> selected this network uses a proxy server to connect to the internet
--> entered 205.151.011.011
--> also tried it with wap.fido.ca
--> tried setting wap ip and port with above information
when I try to connect it says dialing and then always comes back with there is no answer at the number you have dialed.....etc....
1. go to Start-> Settings, choose the Connections tab, choose Connections, then click on the “add a new modem connection” link.
2. call the connection Fido/Rogers Internet, and selet the Modem as Cellular Line (GPRS). Press Next.
3. Access Point Name, internet.fido.ca if you are on Fido or internet.com if you are on Rogers. Press Next.
4. User name and password are fido/fido if you are on Fido, or wapuser1/wap if you are on Rogers. As for domain, 205.151.011.011 for Fido or 208.200.067.150 for Rogers. Press finish.
5. add another connection, and call the new one Fido/Rogers MMS, Cellular Line (GPRS) modem. Press next.
6. Access point name, mms.fido.ca if you are on oFido or media.com if you are on Rogers. Press next.
7. User name and password are fido/fido if you are on Fido, or media/mda01 for Rogers. As for domain, 205.151.011.013 for Fido or 172.025.000.107 for rogers. Press finish.
8. go to start -> Messaging, Tools menu on the bottom, MMS Settings.
9. in the preferences tab, connect via “my ISP.” Go to the servers tab.
10. press New, for Server Name type in Fido/Rogers MMS, Gateway 205.151.011.013 for fido or 172.025.000.107 for rogers, port number is 9201 for both, Server Address is http://mms.fido.ca for fido and http://media.com for Rogers. Press OK.
11. set the new account you’ve just set up as default, then delete the default account.
12. you’re done!
When I Open Internet Explorer it connects but it says My Vision Name or password might be incorrect... Please if Anyone had this problem tell me how to fix it
Try to run IOTA
Run Phone - Menu - Options - Services - Internet - Get Settings - Start
See if that helps (worked for me on an older rom)
If that doesnt work -
Start - Settings - Connetions - Connections - Add a new modem connection
Then Click Next - #777 in "Number to dial" - Finish
Click Manage existing connections and select the connection you just created and then try to connect to the net. It will ask you for username and password...leave it blank and click save password and connect
post back if it works
I am also having this problem and I tried to do what you said but it still doesnt work. I get the error message:
Cannot Connect - The current connection cannot be used for your request. Please end the current connection and try again.
rbadh91 Thanksss!
Dude Thank [email protected]!!!!!!!!!!
being given a hermes but it is AT&T branded.... it will obviously come without sim and I need to unlock it so can be used on TMO..... will I still be able to do this by connecting it by usb and using the v3a unlocker? Also if there is anything else I should no that I may have missed roaming the threads please let me know.... I currently have an excalibur so am pretty familiar with modifying things.
all gsm phones comes with a sim of sorts
he's being given the phone, so the person giving it to him is probably keeping the simcard?
you should be able to unless the unlocker states otherwise..
the phone is fully functional (bar the phone/texting) without a simcard as its a PDA / Phone
kingsizeriz said:
he's being given the phone, so the person giving it to him is probably keeping the simcard?
you should be able to unless the unlocker states otherwise..
the phone is fully functional (bar the phone/texting) without a simcard as its a PDA / Phone
Click to expand...
Click to collapse
Ok just making sure... also I could not find USA tmobile settings for once it is unlocked to get everyhting working right. I know there is special settings for the excalibur to get MMS and sms working properly so I would assume that hermes would be the same.
I found the keyboard fixes as mine is an 8525(cingular) but I want everything to work right.... If I missed it just link where I need to go for US tmo setup.
I dont mind doing the reading... THANKS!!!
PS..... Obviously I will be changing ROMS too
Is it the same as excal....?
Here are the steps and settings:
Step 1. Setup GPRS connection for T-Mobile network:
Start > Settings > Connections (tab) > Connections > Advanced (tab) > Select Networks > New...
Enter the name for the profile (e.g. T-Mobile), then go to "Modem" tab and click "New...", enter name for the connection (e.g. T-Mobile Data), choose "Cellular line (GPRS, 3G)" in the drop-down menu, click "Next", the access point should be "wap.voicestream.com", click "Next", leave all fields blank on this page, click "Finish". Now go to "Proxy Settings" tab and select "This network connects to the Internet".
Click "Ok" all the way out.
Step 2. Setup MMS:
Start > Programs > Messaging > Menu > Tools > Options... > MMS > Servers (tab) > New
Server name: (you name it)
Gateway: 216.155.165.50
Port Number: 8080
Server address: http://216.155.174.84/servlets/mms
Connect via: (the connection you created in step 1)
Sending size limitation: 300K
WAP Version: WAP 2.0
Click "Ok", set this new entry as default (with a red arrow on the icon).
check out HTC Network Wizard (comes precooked into most roms now..) if not then schaps operator setup
does the leg work for you
Similiar to the excal 6.1 roms then.... I am reading all the new roms now so trying to decide where to go first LOL.... seems all have good and bad... I'll keep wading through them
I used to be with AT&T with my 8525 and then switch to Sprint which of course doesnt work with Sprint. So i ended up getting a Samsung Rant and dont exactly like the web browser so i was wondering exactly how i would go about sharing my data connection with the 8525 via blutetooth. I tried it once and this is what i did:
1. I went to settings and clicked on connection settings under the connections tab.
2. clicked on Add a new modem connection under "My ISP"
3. When i do that it asks to enter a name for the connection and to select a modem, so i select bluetooth as modem and click next.
4. Then it asks for the device the connection is on and i select my rant and hit next
5. then it asks exactly this and has a text box under it: "Enter the number exactly as it should be dialed. include extra numbers, such as an ouside line or credit card" didnt exactly know what to put here so i just put a few randon numbers in to see what next step would be
6. then it asks for user name password and domain....dont know what to put here so i just clicked finish
7. when i try to connect to it. it says connecting and a message on my rant says entering into bluetooth data mode, and the 8525 tries to connect for a minute and says connection failed and goes back to today screen.
So if anybody could tell me in detail what info it is that i need it would be great. and also under select modem drop-down box there is a selection called "cellular line(GPRS, 3G)" is it possible i could just put the info for the data plan in there and it connect to the sprint data plan if that is possible..if it is can you tell me in detail the information u need and how to do it......THANKS