Just recently bought the iPhono mini BT450Rx to use with my SX66 with WM2003SE. Cannot make all features work at the same time. Here's the story. The mp3 players I'm using are WMPlayer and TCPMP
Installed Broadcom stack 3900 I got "hands-free" and "High Quality Audoi" working, but play/pause/stop/Prex/Next buttons on right earphone wouldn't work. Volume buttons do work.
Here I'd like to notice, that I also have Motorola HT820 BT stereo and its perfectly working with this stack with all buttons, receiving calls and so on. The only problem with HT820 I found so far: if I'm listening mp3 and there's an incoming call and I've answered it without pausing mp3 player, then, after end of the phone call I have to disconnect and reconnect BT Audio device in BT Manager. However, if I put mp3 player on pause and pick up the call, then I can just continue listening.
I tried to change the BT driver and found the one from HP for HP BT stereo, (which I also tried initially, but because it doesn't have "hands-free", I returned it and bought Motorola). It was downloaded from HP site, dont have link right now, but the exe filename is SP3003.EXE. The driver's version was 1.6.0700
Having installed this one I got stereo AND buttons working with mp3 player, but "hand-free" stopped working, probably because the driver is intended for the stereo headphones only, not the "hands-free".
Making some researches I realized, that the part that controlls buttons is sitting in the \windows\BTCeAvIf.dll file. So I extracted this file from HP 1.6.0700 driver, reinstalled Broadcom 1.0.3900 stack and replaced the file above. After all this manipulations, I got hansfree working, able to make calls BUT only to the moment when I connect Audio profile. At this moment I can listen mp3s, control, mp3 player with buttons on the iPhono mini, but cannot talk on the phone. However, if I disconnect "HQ Audio" profile in BT manager, the headset profile gets activated again.
This is pretty annoying, knowing, that HT820 works pretty well without all this tweaks.
Can anybody tell me whether I'm doing anything wrong, or if there's better drivers for iPhono, because I coudn't find another solution so far.
One of the good things with iPhono is it has 4 buttons in mp3 player mode play/stop/next/prev vs HT820 with play/next/prev.
The only thing, I cannot quite understand, since the stop button is also power/(make)answer the call button, how this device is going to determine whether I want to stop music or pick up the phone for making or answering call.
Hi there, I read your thread with a lot of interest cause i have the same problems as you. I purchased the BT450Rx too and had them paired with a Prophet, and I'm the same problems. Actualy, FF/REw works for me in WMP10, but not Pkay/Pause & Stop. Did you have any luck making them work?
TDX
tdx said:
Hi there, I read your thread with a lot of interest cause i have the same problems as you. I purchased the BT450Rx too and had them paired with a Prophet, and I'm the same problems. Actualy, FF/REw works for me in WMP10, but not Pkay/Pause & Stop. Did you have any luck making them work?
TDX
Click to expand...
Click to collapse
I'd actually resolved some issues earlier, wth the exception that I was using TCPMP player instead of WMP and still could not answer the phone while listening to the music.
I was able to use all buttons but on some MP3 files, very misteriously they wouldn't work.
Unfortunately my phone got hardreset because of a deep freeze I coudn't take it out from, so I'm gonna need to reinstall BT again and tweak it again to make headphones work.
I actually love them, and have been using them most of the time, about 4 hours every weekday just for music and audiobooks, despite they suck as a phone headset
Has anyone tried using the shure se115m+ or the music + mobile adaptor ??
do the navigation (fast forward / rewind) work ?
I am not quite sure.. If I understood you correctly..
But if you meant something like... If it was possible to change songs/pause songs when you have connected your phone to a device via bluetooth..
Then yes, it does work in my car.. and it does work with the headphones that comes with my device(BT).
Fast forward however, does not seem to work. But I rarely use that feature anyways.
Please.. correct me if I am wrong.
im more interested in the adapter
shurecanada.com/PersonalAudio_NEW/EN/earphones/MPA.html
i dont believe its BT
No it doesn't. But it has a rather more serious issue than that. It attenuates audio level pretty badly. On top of that, it filters out the voice quite effectively. In most of the tracks that I tested with, the voice was almost inaudible, and in some of the tracks it totally got filtered out. But if you press the button on the dongle, you can listen to the track pretty nice, then again, the button doesn't latch. So you have to hold it if you want to enjoy your music. I exchanged it with SE210 and it is awesome. SE115 sounds great too. But not the mobile one.
thx overture8
Hi there folks!
Hope someone can tell me ANYTHING to keep me from losing it completely...
I upgraded to an X10 mini pro from my Nokia 5530 a few weeks ago, and aside from a minor issue where the hardware keyboard appeared to be dying (It 'lost' the symbol button, acting like I had disabled the Default Input - regardless of how the default input checkbox was set. Turns out it was a hair or something inside the keyboard itself, who knew?!)
Anyway. The BIG feature the Nokia had that I REALLY liked was it's ability to play music on a bluetooth headset.
Now, the headset I use is one glommed from a Playstation 3 kit - It's high bandwidth, if a little bulky compared to the true phone ones, but handles audio as well as a wired headset, up to around 15 feet after which is starts to fade a bit.
I had it working well on the Nokia, it behaves relativly well on the PC, despite the chassis blocking the dongle back there, but I cannot, CANNOT for the life of me, make it work on the X10 Mini Pro.
It works with VOICE just dandy, with all it's superb range and definition.
But music stubbornly refuses to play through it.
Is this an X10 thing? Is it an Android thing?
I searched a fair bit before posting this, but while people have discussed several bluetooth issues, none of them really seem to address exactly this problem.
Am i missing some awesome (But overlooked by me) app? Am I weird for not wanting to have wires wrapped around me while cycling?
Please help a hopeless n00b!
Dude........
I have the X10 mini and my DELL BH200 headset works great with it.
No problems...
Check if you have kept the headset in discovery mode or not...
tejagamer said:
Dude........
I have the X10 mini and my DELL BH200 headset works great with it.
No problems...
Check if you have kept the headset in discovery mode or not...
Click to expand...
Click to collapse
It allows you to listen to music through it then? Because thats what I need. Aside from that, mine already works perfectly...
The headset itself syncsby holding the power button for a few seconds, and drops out of sync mode once its linked to the host.
Like I said, the headset works perfectly aside from not playing music. Een while connected, it ONLY plays music from the phone speaker.
Yes you can play music thru bluetooth with any android device. Android is fully A2DP and AVRC compatible.
It must be your headset.
I use three different bluetooth headsets with absolutely no problems. Music, movies you name it. No lag (as I had in my ipod)
Sent from my E10i using Tapatalk
Okay, thanks for the replies! I will start trying out other headsets come payday! Being tightfisted I wanted to avoid the necessity but if you guys are having not trouble then it looks like I must bite the bullet.
Cheers!
- SIDER
I've had this for a couple of months now and I thought I'd share my experience with it so far. (I've already done a short version under another thread here)
The MW1 looks amazing, design wise. Sleek, elegant and pretty high tech. It complements any recent SE/Sony phone. As I use my headphones every day, either commuting or when training/working out, I bought this so I wouldn't have to use the headphone-port on my Sony Acro S. That way I keep it waterproof and won't wear out the flimsy hinge on the cover (phone).
Daily Use:
The clip:
In daily use, the clip doesn't provide enough "grip", so the entire thing has a tendency to move around. I believe that the spring on the clip is strong enough, but the grippers on the inside are not sharp enough to grip things like thin fabric (ie. t-shirts, shirts, synthetic material). The shiny (slippery) polycarbonate body of the adapter also makes things worse.
The clip hinge is placed at the opposite side of the charging port. A natural way to open the clip would then be to hold the adapter with one hand and use your thump to activate it. Problem is, SE/Sony designer has placed a "Call Answer Key" button right were you would hold your other fingers. When operating the clip, most of the time, you end up pressing the button. Then you get an annoying "peep'ing" sound, prob for voice dialing or something. Trying to avoid pressing the button only makes you fumble with the adapter.
The clip end is also flush with the adapter body and the hinge itself is placed very near the end of the body. As a result, the clip is "harder" to activate and your thumb does not have a natural resting place when it's fully engaged. Add to that the slippery surface of the entire thing, most times your thumb will slip and/or you will push the button.
- The clip should have had more leverage
- The clip should have been further in, that way you would be able to open the clip and hold it open until you find a suitable place to clip it.
- The surface of the clip should have been less shiny/more rubbery.
- The button is placed "illogically" compared to the clip mechanism. Either clip should be on other side or button should.
The Buttons
It's a small device, so butting a lot of buttons on it is not easy. But it could have been done so so SO much better than this. Operating the MW1 clipped into something and not looking at it is very difficult. Even after this amount of time, I haven't seemed to get proper "muscle memory" use from it.
The "Play" buttons are on a sort of "rocker", skip on either side and play/pause button in the middle. It's raised out from the adapter body and is pretty distinguishable from the other buttons on the device. The problems are as follows. There is a circular "Back" button placed very close to the rocker. Most of the time when I try to skip back, I end up pressing the back button. This brings the device out of the Bluetooth play function and into the device menu. Most times you wont notice this happens and you will press the back button again, that then selects another item in the menu and the device doesn't auto-return to the music funtion. I then have to stop and look at the screen to enter the music functions again.
A lot of times this happens, I end up in the SC-Card music function in the menu This renders the music function via Bluetooth useless. I then have to manually select the phone to use the play functions.
The volume button on the adapter is placed on the other side of the device. Quite often, but not as much as above, I manage to hit the skip button on the other side because one of my fingers is resting on it or near it.The volume rocker is also too narrow and it's sometimes hard to hit the right way, up or down.
One would also think the "Call Button" on the display side of the adapter would be the enter button, but it's not. All "confirm" responses done on the device is via the Play/Pause button. Sometimes I still hit the big call button as this is a bit more intuitive, too me at least.
Using any type of glove, in my case very thing biking-gloves makes it's neigh on impossible to use any of them. But this is sort of outside the parameters of use for most.
- Music/play buttons should have it's own side of the adapter. This would immensely help operating the thing without looking at it.
- Call button should be confirm button. That way you could hold the device with two hands, using our index fingers for either skip button and then your thumb on the call button as enter/confirm.
- The play functions should be placed closes the the charge side of the adapter. Increasing the distance from the volume buttons.
- Back button should be removed or placed someplace else, on the front opposite side of call button.
The Menu System
All in all, it works. Little or no lag, simple UI and easy to use. BUT BUT BUT I F-ING HATE using it connected to my phone, then entering the SD-menu instead. It's a hassle and a real annoyance. I've found it easier to unlock my phone and use that to change music instead. This is prob the worst part of the whole product and could have been a deal breaker for me had I known about it.
Using the smart app is also a bit of a hassle when playing music, since it automatically shows the received in the display. You then have to push play to view the entire message or back to enter music function again. Most times, I fumble with this and it's annoying. I will probably uninstall the sms/email/calender app because of this. Great idea thought and I love the functionallity.
- LOCK MUSIC FUNCTION WHEN YOU ARE CONNECTED VIA BLUETOOTH!!!!!!!
- What about removing the SD-CARD options from the menu, either user selectable or when there is NO sd-card in the slot.
- Press call button to view the message or play it via TTS...(WHICH IS GREAT BY THE WAY)
The SD MP3 Player
What a load of horse manure!!!! I can't say this enough time, this functions utterly destroys the usability of the device. Removine this ENTIRELY would INSANELY improve the device. But, actually having this function is a very VERY smart idea and would be great if it worked. There are problems with getting mp3's to the device. COME ON, WERE IN 2012. I had easier times getting MP3's to my Creative MuVo2!!!
Why does it sometimes enter the SD player in the menu when I'm playing via my phone and there is no sd-card in the slot? Grrrr...
- FIX IT
- Make it user de-activateable (SAME WITH RADIO)
- If there is no SD card, DONT SHOW it.
The Sound
Mainly very very good. Good earbuds, clear enough and deep enough. But why does it play the sound louder when skipping to a song, then 0.5sec later turn ut down, even if it's all the way up? It also started "skipping" the sound after a recent update. At the same time, I also started getting some static on it.
Actually I'm very impressed with the sound and the earbuds!
The "Metal" Cover
Looks pretty good, works pretty well. But this WILL wear out and become fllimsy. So the device's quality in it's entirety is solely based on the durability of this part. When this is worn, for the most part, it will make the device useless for me.
- A USB-key for charging and moving files would be better IMO
The Earbuds
The mic should have been on the ear-bud wires. I mostly look like a twatteroony trying to talk into the adapter. They are also too short to keep the adapter say, in the pocket.
- Longer wires and a mic would be very good. Then you could use the device display and call at the same time. You could also keep it in your pocket if it rained. Some jackets down have a natural place to clip the adapter to.
CONCLUSION
I'm happy with it, don't find it too expensive for what you get, battery life is great. You get a lot of accessories. If you needed another charger, that would be (here in Norway at least) HALF THE PRICE OF THE ENTIRE MW1 SET!!! You also get a short micro-usb cable which I find very "nifty".
But it's obvious that they didn't test this product IRL, but went straight from the CAD drawings to production in China'ish. If they used a little bit more of their brain capacity, this would be the single best product ever released from Sony Ericsson. That's what really annoys me, only very small adjustments would turn this adapter into the work of a genius!
WHY WHY WHY WHY CAN'T I GET ARTIST/SONG INFORMATION FROM SPOTIFY ON THE ADAPTER. Even Sony manages to get this info onto their lockscreen automatically. It's not like it takes a lot of bits to send this info vi BT.....
Pro:
- Light
- Sleek
- Esthetically design
- Great headphones
- Flat cable (tangle free) headphones
- It has a wide clip, strurdy
- Nice, unobtrusive display. Would a color LCD make it better? No, IMO it would look less for it)
- Long battery life
- Bundled accessories: microSD adapter, short micro USB cable, Micro USB charger
- Smart Apps; SMS, Mail, Call Log, Calender on device display
- Update device via phone
- Price, it's really not that bad when proper headphones are equal in price and you get FM/MP3 bundles as well
- Keeps my Acro S waterproof since I don't have to open the headphone flap.
- GREAT SOUND!!!!!!!!!!!!!!!!!
Cons
- Glossy is as glossy does, fingerprint hell!
- Short headphone cable means you can't use it on other devices and that you can't keep the BT dongle in you pocket if you wanted to
- 2GB microSD card? Come on, it goes straight in the trash and it's 2012. Skip it, or ship larger.
- Won't display song info from Spotify.
Can I talk even I changed the headphone? My headphone can only play music but not talking.
Sent from my MT27i using xda app-developers app
Wow! this looks great.
I really like mine, the headphones in particular and awesome. I just hope Sony releases some firmware updates to address the issues. They were quick with release one of them but since then it has been a long wait.
To use it as headset it is great!
If you wanna use the additional benefit of SD-Card player and radio it's just a pain to use, some thing do not work at all!
Hi all just thought id drop by and say there's a new software release, though to caveat that SUS hasn't worked fro me and the standalone bin file isnt available to DL yet
http://talk.sonymobile.com/message/306121#306121
A new update (0.1.C.0.3) for Smart Wireless Headset pro is now being rolled out. I suggest that you use SUS to update.
http://www.sonymobile.com/gb/tools/update-service/
Software improvement:
- improved micro SD card compatibility and handling
- improved mp3 player functionality and playlist handling
- progress bar added for indexing of music
- Japanese caller-ID improved on non-Android phones
and yes its a dupe post but thought id get the news out
Another update 0.1.D.0.6
I've got a question about the mp3 player... if I pause it and turn it off... will it remember where I was the next time I turn it on.
I'm thinking of listening to audiobooks on it, but then it's very important that it remembers where it was last time when you power on the device.
Brgds... Tubgirl
Tubgirl said:
I've got a question about the mp3 player... if I pause it and turn it off... will it remember where I was the next time I turn it on.
I'm thinking of listening to audiobooks on it, but then it's very important that it remembers where it was last time when you power on the device.
Brgds... Tubgirl
Click to expand...
Click to collapse
I can test it when I get home later. When you play MP3 from phone, the music app will remember what you are playing. WHen you turn off the MW1, the music app is still active. WHen you reconnect the MW1, you can play from the pause because the app remembers
//Just got the MW1... definitely could use more polish (the device resetted a few times.. sigh)... the call button is totally useless for me, I keep accidentally pressing it and it beeps 3 times(mutes the music), then continues to play music
for those people wondering why A2DP or Stereo Audio isn't showing up --
You either have FM Radio or "nothing" selected... You'll need to go to the music icon on MW1, and select the device name. Then, A2Dp / Stereo Audio will work.... for multipoint, I have to do this manually everytime I switch device source
EDIT: for playing music off of the microSD, if I shut down and restart the player, it only remember the last song, but not the location within the song.... you could fast forward through the song (but no timestamp display)
there is playlist/album support, along with shuffle, and group by artist.... a basic music player
I am using this headset with a Nexus 5. I've had many other headsets of this type, such as a retired sony mw600, jabra clipper, and a still currently functioning samsung hs3000.
I liked all of them for various reasons. One of them being that if my phone was in my pocket, I could press the main button to load up google now search (using another app in the play store to change the default application opened by this button)
The MW1 impressed me at first. But I noticed a problem.
I noticed I was not able to use the action button on the headset for anything other than answering a call, or ending a call. If I pressed the button, it just beeps in the headphones. NOTHING! So I reinstalled the app I use to take control of what happens when you press a headset button and tested it was still working with my samsung HS3000. It worked like a charm. Press the button, said "text message John Smith Hey let's go see a movie later tonight" google prompted me to confirm I wanted to send the message, and away it went.
But when I use the MW1...NOTHING HAPPENS. It just beeps.
Is there a way I can use the circle button on the mw1 to load up google now, and how can I find out what application is taking up the first space in my notification bar?
I still have not found a way to do this.
Thanks!
Battery Info
is there any way to read the battery level from mobile phone?
Using this BT headset for 1 month..
Mostly agree with the review..
For me, flat cable is not good, although it's tangle free, it's very microphonic.
The clip's grip is very light, can't hold MW1 on my pocket well
The rest is no complaint..
Amazing sound quality from it's DAC chip (play from microSD), the SQ is near to sansa clip+, just less soundstage and separation. Much better than my galaxy S2. SQ degradation due to BT transmission is very little.
The bundled IEM (Sony Ericsson MH1a) is very-very great for basshead. Surprisingly, it also good for rock! Yeah, it has good speed and transient! That's rarely found on basshead IEM on it's price
So far I'm so happy to be MW1 user
srk_srinivas said:
is there any way to read the battery level from mobile phone?
Click to expand...
Click to collapse
no, until someone try to make android application fot it
codes not matching
Couldn't find a better place to ask this. Trying to pair my Sony MW1 with a Taotronics Wireless Audio Bluetooth Transmitter (TT-BA01) to listen to my TV through headset. Can do this easily with my newer Sony SBH52 headset. When trying to pair with MW1, the MW1 keeps on saying on display "Codes not matching". Transmitter manual says it can pair with pin codes: 0000, 1111, 1234, or 8888. Does anyone know what pin code for MW1 is? And whether pin code can be changed?
MW1 manual has no mention of pin codes. Troubleshoot on Sony site makes not mention of "Codes not matching" prompt.
Pls help. Sorry mods if this is the wrong place to ask.
Hi ! Exactly the same problem!
podezebi said:
Hi ! Exactly the same problem!
Click to expand...
Click to collapse
you could try downgrade if you using newest firmware: http://forum.xda-developers.com/xperia-u/issues/how-to-downgrading-sony-mw1-to-0-1-d-0-6-t2909130
rgrgrgr
Somebody has any experience with MW1 and Marshmallow ?
vhanna said:
Couldn't find a better place to ask this. Trying to pair my Sony MW1 with a Taotronics Wireless Audio Bluetooth Transmitter (TT-BA01) to listen to my TV through headset. Can do this easily with my newer Sony SBH52 headset. When trying to pair with MW1, the MW1 keeps on saying on display "Codes not matching". Transmitter manual says it can pair with pin codes: 0000, 1111, 1234, or 8888. Does anyone know what pin code for MW1 is? And whether pin code can be changed?
MW1 manual has no mention of pin codes. Troubleshoot on Sony site makes not mention of "Codes not matching" prompt.
Pls help. Sorry mods if this is the wrong place to ask.
Click to expand...
Click to collapse
Did you find solution??
vhanna said:
Couldn't find a better place to ask this. Trying to pair my Sony MW1 with a Taotronics Wireless Audio Bluetooth Transmitter (TT-BA01) to listen to my TV through headset. Can do this easily with my newer Sony SBH52 headset. When trying to pair with MW1, the MW1 keeps on saying on display "Codes not matching". Transmitter manual says it can pair with pin codes: 0000, 1111, 1234, or 8888. Does anyone know what pin code for MW1 is? And whether pin code can be changed?
MW1 manual has no mention of pin codes. Troubleshoot on Sony site makes not mention of "Codes not matching" prompt.
Pls help. Sorry mods if this is the wrong place to ask.
Click to expand...
Click to collapse
Anyone who has any new updates regarding this case?
If you know, please let me know cause this is a big problem with MW1
Same problem with tewtross Bluetooth transmitter