Have noticed that on my rooted Eris running 2.1 that I had a icon for the speech to text function in the text msg input field. It has disappeared. Cant find it. Any ideas?
Not in any settings i can find. I'm guessing its involved with the voice controls but I cant find it.
Any help will be appreciated.
running Eris Lightning Rom.
Related
Hello all. Before tweaking to DCD 3.1.2, Voice command would announce incoming messages and callers. Now, with dcd, the actual ringtone is played over bluetooth headset and no announcments are made. any thoughts on how to eliminate ringtone being played over bluetooth and have announcments made again? Thanks folks. You guys rock!
mine acts different...i get ringtone in my headset and it announces who calls over ringtone in my headset, also my phone vibrates but doesnt ring.
i wish there was an easy way to configure the settings cuz i would like for my phone to vibrate and ring out loud (im not always wearing my bt headset 24/7 when bt is enabled) and i want my headset to announce so and so is caling or the number if its not in my phonebook.
i also notice when in a call it announces who is calling in for call waiting which is cool
Ring and voice command
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Click to expand...
Click to collapse
First of all, dcd's roms are meant to be cooked clean. That's why UC compatibility was added. Lots of people got excited when it was first added, but I've seen very very few people actually utilize it the way it's supposed to. Before I go on I have to ask...are you cooking your own rom using the kitchen, or are you using the precooked rom that is posted? If you're using the latter, then NOTHING besides the essential functions will be installed. It's a clean precooked rom and nothing else.
That being said, if you're cooking your own rom with the kitchen, there's a few things you should know...
Voice Command does not come stock with the phone. It's a third party application from Microsoft that costs roughly $40. There isn't an option for it in BuildOS, so unless you have it and you're installing it via a cab (the way I recommend), or through an OEM, then you will not see any options for it, as it is not installed. If you're referring to Voice Speed Dialer, that's a whole different program. There are no options for it. You have to manually record yourself speaking the commands.
Sliding Sound has to be added using BuildOS. If you're not checking it off prior to cooking the rom, then it will not be included in your rom.
I don't use MSN messenger, but I'm going to guess that Windows Live is what you're looking for? If so, Windows Live also has to be added using BuildOS.
I'm not sure what you mean when you say "Finish the GPS settings". Could you clarify?
As far as your personal settings tab goes, that is a valid problem and we would have to speak further in detail for me to diagnose it.
MS Voice Command: Definitive Guide Thread...
http://forum.xda-developers.com/showthread.php?t=391262
P.S. had the same problem, got the 1.6.19209 version listed in that thread, now voice command talks right over the ring tone and I get the best of both worlds.
i dont use voice command really, but i noticed after the update that my phone no longer physically shows the contact or number of whos calling when my phone rings.
It just says
Verizon Wireless
Incomming Call
Then the rest of the box is blank.
Anyone know how to fix this? I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
Click to expand...
Click to collapse
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
ROM requires a carrier cab:
Alltel
Bell
Cricket
Iusacell
Qwest
Sprint
Telecom NZ
Telus
Verizon
Click to expand...
Click to collapse
voice command and ringer volume
gcincotta said:
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
Click to expand...
Click to collapse
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
I personally do not use Microsoft Voice Command anymore.
The reason is that it uses a lot of resources on my phone.
I did several customizations on my phone and have several apps installed and I roughly get 24 to 25 mb at startup. With voice command I get around 19 to 20.
I just rather use Voice Speed Dial that is in DCD's Kitchens. Yes you would have to program your voice to recognize the commands, but it does what I need it to do and it saves a lot of memory.
findthisfunny said:
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
Click to expand...
Click to collapse
I have been using VC with all of DCD's ROMS and have not had a problem. I bought the package a while back but found an OEM that I use now. I works great when it does figure out what I am saying. LOL
I don't have any issues with setting the ringer by VC and then by stylus. I also don't have any issues using it through my BT headset. Make sure you have the right settings in the settings control panel with the icond Voice Command. Check out the options and notifications for each of the checked items. There was also a set of files to fix something a while back I have posted them here but you should do the search to find out what they fixed.
Has anyone noticed that when you put a pound key (#, aka number symbol, octothorpe etc) in a contact's number, it doesn't work? I.e. the # dtmf tone is not sent when you call the number, while other tones are sent properly.
For example, I set my voicemail number to *86,,5555# (the 5555 part is just for illustration, and should be filled in with the voicemail pin)
Whenever my phone calls voicemail, it says "Sending Tones 5555" but it doesn't mention the #, and I can tell that the # tone is not sent, because the voicemail system waits a few seconds after the password is sent, which is exactly what it does when I dial it manually and neglect to press #. When I do press pound manually, the system continues immediately without a pause.
Has anyone else experienced this? Or has anyone else been able to sucessfully send the # key?
hi, i haven't had this happen personally, but would puting space between the password and the # give the sytem time to receive it.? don't know if it will but i never had this happen either.hope this helps. hp
I don't think you can add spaces, but I added a comma (which indicates a pause) after the pin. That didn't help. Thanks for the suggestion though.
##7764726(spc=000000) and *#*#4636#*#* are hidden menus so the # may be handled special.
I actually noticed this today when I was trying to get through a damn automated menu. It kept asking me to hit the # key after things but kept telling me "Invalid Entry". I literally used every other button, to include * during the call and everything else worked. This is no bueno!
What version of Android and what Rom(if any) are you running? I am on 2.3.4 w/Eclipse v1.1
Thanks, AtLemacks, It's nice to know someone else has experienced the same thing (misery loves company I guess).
I'm using the same android version and ROM that you are. But I'm pretty sure I had the problem even back when I was using using P3Droid's Rooted Gingerbread without any ROM. I don't remember if I tried it when I was on stock Froyo.
I didn't have this problem before, I call/go through that menu fairly often.
did anyone figure it out?
I am suffering the same problem. Did anyone ever figure out how to send pound sign #?
Try a alternate dialer like Dialer One or the like.
Edit try voicemail *86, the # key skips to the next msg on my Milestone x2 port.
Found a solution
Found a solution, not sure if everyone can use it. I am using Motorola Photon with Sprint. My solution is to create a contact like this for google voice dial out
15125553010,,2,3235551110,#,,,1234,0118521234567,#
and it works for me. I can now use a direct dial icon on my home screen to call. The trick is the first pound sign. It needs comma before the pound sign and the three comma behind it.
Anybody else find a work around?
I am glad to hear that I am not alone, but a little dismayed to not see any answers to my days of searching for a solution. Has anyone else come up with an alternative work around? The direct dial method above didn't work for me.
Using a Galaxy S i9000 rooted with paranoid android 2.52 (although I did have this same problem with other mods as well)
Thanks!
I remember on my previous HTC phone I could remove the damn microphone from the keyboard and if I remember correctly there was a smiley button that included all the smiles and what not. Does anyone know how to get that on this phone? I have looked through all the settings but I can't find where to turn off the microphone. Any help would be greatly appreciated.
under input devices you should be able to uncheck voice
I don't see this option at all.
Sent from my EVO 4G LTE...finally.
It seems that voice typing in SMS only works when I am on WiFi. If I have full signal 4G, I can go to an SMS and try to voice type and nothing happens. The Mic just appears with a dotted line around it and it just sits there. Just in case, I downloaded the language pack to allow offline voice recognition.
How can I fix this?
BTW, I am on MIUI, but it didn't work on CNA either.
Thanks!
I am trying to find a solution this this issue that has popped up on tow ROMs that I really like.
On most ROMs when I hit the ear piece to dial out the standard voice dialer app box shows up and asks me what I want to do but on a couple of the ROMs I get a Google box with a red circle asking me to speak now. The issue with that is that it can recognize my voice if I tell it to dial a number but not names from my phonebook. I have to use the voice dialer widget on my home screen to activate standard voice dialer. Anyone know how to disable the Google dialer? Anyone else have this issue? Right now I am using Nocturnals_Xi36*ICS*Sense. Thank you.