Related
Everybody has been stating that they got GPS to work, but only some left instructions. I hope this helps. Thanks to those that gave me advice on how to get this working.
Make sure unter "External GPS" that the "GPS Program port:" has "COM4" selected. Leave "Hardware" alone which is the next tab over.
Then under "Access" make sure "Manage GPS automatically" is checked
Live Search for some reason wouldnt work until I got in my car and drove away from my house. Right when I drove away, the GPS kicked in, and worked as if I had an external GPS. My settings for Live Search are "GPS COM4".
In order for TomTom to work, you first have to get your GPS location in Live Search, then launch TomTom, and then TomTom will work fine as if you had an external GPS.
My TomTom settings are "NMEA GPS receiver" then "com 4" then baud is "9600".
These are the steps i took to get GPS working with the new ROM update using the internal GPS. Havent been able to test the Rev A yet. But it seems everybody is stating that is working fine, but only some were able to get GPS working.
Hopefully this will help you all to get GPS working with the new ROM. W/o me doing these steps, I wasnt able to get GPS working. Also please note that I had to leave my house for it to work. With my Bluetooth GPS receiver I could get a location in live search or Tomtom w/o leaving the house. But for the internal GPS, i had to leave the house.
Have you tried with google maps. For some reason i can get GPS signal in my house with google, but not with live. Also, under the GPS hardware, does yours say none, and baud 9600 or 4800?
Edit:
Never mind, I got it working, live just connected in my house. I have baud set to 4800, don't think it really matters. (anyone know what baud is anyway, and what the best settings are?). I wish there was a way to do this without live though.
baud is just another word for bits per second, its the connection speed of the hardware, since its internal it probably wouldnt make much of a differnce
nuebay said:
Everybody has been stating that they got GPS to work, but only some left instructions. I hope this helps. Thanks to those that gave me advice on how to get this working.
Make sure unter "External GPS" that the "GPS Program port:" has "COM4" selected. Leave "Hardware" alone which is the next tab over.
Then under "Access" make sure "Manage GPS automatically" is checked
Live Search for some reason wouldnt work until I got in my car and drove away from my house. Right when I drove away, the GPS kicked in, and worked as if I had an external GPS. My settings for Live Search are "GPS COM4".
In order for TomTom to work, you first have to get your GPS location in Live Search, then launch TomTom, and then TomTom will work fine as if you had an external GPS.
My TomTom settings are "NMEA GPS receiver" then "com 4" then baud is "9600".
These are the steps i took to get GPS working with the new ROM update using the internal GPS. Havent been able to test the Rev A yet. But it seems everybody is stating that is working fine, but only some were able to get GPS working.
Hopefully this will help you all to get GPS working with the new ROM. W/o me doing these steps, I wasnt able to get GPS working. Also please note that I had to leave my house for it to work. With my Bluetooth GPS receiver I could get a location in live search or Tomtom w/o leaving the house. But for the internal GPS, i had to leave the house.
Click to expand...
Click to collapse
I have everything working but tom tom 6. It says no GPS device what gives? Do you have to have Live search running in the background for tom tom to work. I close Live Search after aquiring five satellites then launch tom tom 6 and all I get is no GPS device. hehe I know this is a beta and not a release rom. I have no Idea how people can aquire a satellite in their home. Shesh I have a huge solarium and still have to go outside.
what do u mean you get five satellites? Also to answer your question, what i do is after getting the GPS fixture in Live Search, I just click start and go to Tom Tom, without doing anything to live search. It seems to close automatically when I open Tom Tom.
Does anyone know if the GPS signal comes via the Sprint towers or is my phone communicating directly with the satellites in the sky? I ask because getting a signal inside my house seems unreal.
GPS signals come from satellites which is why the signal degrades when you move inside, eventually becoming nonexistent or unreal.
When someone says they are getting five satellites it means that is how many signals their device is receiving and using to triangulate its position. It requires at least four satellite signals to triangulate a current position and the more signals it can pick up on the more accurate the triangulation.
Ks.
when i said "unreal" i meant unbelievable i have a globalsat BT308 (which is kind of old, i bought it in 2000 or 2001) and theres no way i would ever get a signal inside.
so even if i go out of sprint reception area i can still communicate with the satellites right?
For some reason I always have to setup the GPS device in TomTom. It works but as soon as I close TomTom it looses the GPS settings. Then I have to run through the setup again...
Anyone else having the same issue?
My GPS wasn't working at all until I turned on GPS location under the phone menu. Location Settings under services.
Once I turned that on my GPS started picking up satellites with in 5 seconds sitting in my house.
Does Anybody know how to get the GPS to work with iGo 2006? I am having no luck at all getting iGo to recognize the GPS device.
TomTom appears to have a bug where it does not see the port windows gps port sharing is showing because the hardware port is set to none (I think it's actually com1 for the real hardware). As a result until something OPENS the port for tomtom, it's unable to attach to it. Until this is fixed you have to launch some other program that does work first and leave it open for tomtom to open the port.
Shadowmite said:
TomTom appears to have a bug where it does not see the port windows gps port sharing is showing because the hardware port is set to none (I think it's actually com1 for the real hardware). As a result until something OPENS the port for tomtom, it's unable to attach to it. Until this is fixed you have to launch some other program that does work first and leave it open for tomtom to open the port.
Click to expand...
Click to collapse
Thanks for the update. =)
Cheers!
Livesearch.
Hey guys,
Does anyone have the latest livesearch.cab
I tried to download it right now, but it keeps getting stuck.
Probably microsoft servers.
Thanks
fusQer said:
when i said "unreal" i meant unbelievable i have a globalsat BT308 (which is kind of old, i bought it in 2000 or 2001) and theres no way i would ever get a signal inside.
so even if i go out of sprint reception area i can still communicate with the satellites right?
Click to expand...
Click to collapse
Theoretically, you should be able to get a GPS signal anywhere in the world.
supdawg said:
Theoretically, you should be able to get a GPS signal anywhere in the world.
Click to expand...
Click to collapse
I understand that they can selectively disable regions now. (read about it in the paper when they unfogged the signals) so conceivably,we wouldn't be able to use our moguls in iraq or afganistan.
pflatlyne said:
I understand that they can selectively disable regions now. (read about it in the paper when they unfogged the signals) so conceivably,we wouldn't be able to use our moguls in iraq or afganistan.
Click to expand...
Click to collapse
I think what they do is place devices selectively in those locations that send out false GPS signals to confuse the NAV devices. (probably from ground based stations or on moving convoys that are trying to NOT be detected)
mshnayde said:
Hey guys,
Does anyone have the latest livesearch.cab
I tried to download it right now, but it keeps getting stuck.
Probably microsoft servers.
Thanks
Click to expand...
Click to collapse
http://mobile.search.live.com/client/download_manual.aspx
the automatic download from live.com hasn't worked for me for a while either. it gets to around 15% and stalls...
Has anyone gotten Garmin Mobile XT to work with the internal GPS?
I am going to hold off on Flashing and give DCD some time to mature the release since I already have a G10 bluetooth reciever and have no issues but it would be nice to be able to leave that in my car and use internal when I'm not in my own car.
As far as i know...these are govt sats that are "open to the publuc." In a state of emergency or other situation, they can be blocked or certain areas can be blocked so only, say, certain govts/military could use them. This was the only way the us govt was willing and able to let the gen pop use the sats.
Just got myself a TG01 Upgrading from my old SPV M700 I have installed Co Pilot on my new phone bot it cant find the GPS Signal on it
Google Maps works spot on
Any Idea what port it uses?
Its not COM 9 As i would expect it to be?
Thanks
Beau
Hi, i have almost the same problem i install difretn program on my TG01 i i have problem because hi cannot found a gps why
go here http://www.modaco.com/content/toshiba-tg01-tg01-modaco-com/290500/tom-tom-on-tg01/
it's been dealt with few times
I'm using gps gate for memory maps on my tg01, works a treat.
For most of these programs, if there is an option for what driver/source, choose intermediate driver, other than that, it should work without gps gate
for those that use igo8 as navigation software, to be recognized the gps receiver, just add the following lines in sys.txt:
[gps]
source="virtserial"
shortjock said:
I'm using gps gate for memory maps on my tg01, works a treat.
Click to expand...
Click to collapse
i found that gpsgate works like a charm as well
sadly its not freeware but you can try it out, it has a trial version
I am using NDrive .. and loving it ... so much nicer than the TomTom and Garmin.
GPSGate does work but there is another issue with the GPS on this device where it will lose the signal after a period of time and then sit there and reconnect. It does still work but intermittently disconnects and then reconnects. Apparently the same thing happens when using Garmin which actually doesnt need GPSGate, so nothing to do with the application but more to do with the hardware.
Be nice if this gets fixed when the next update comes out.
Won't hold my breath though.
I agree with you @zomig
haven't you read sticky psots?
its all been said before..-.-
RageCore said:
haven't you read sticky psots?
its all been said before..-.-
Click to expand...
Click to collapse
OK then ...
Where precisely on xda-developers has the issue of the TG01 intermittently losing its GPS connection been discussed?
It is not GPSGATE causing this problem. I believe the problem lies in loosing reception for a second. Without a valid phone signal, the GPS fails to work.
Everytime I lost GPS, I also lost phone reception....
Basically what I think happens is this, somewhere in the software, if the phone signal is lost, the A-GPS is lost, the proper GPS chipset is shutdown too, which throws the GPS program.
Then the phone signal comes back, A-GPS gets a fix and boots the proper GPS up.
My idea is to disable the A-GPS as its useless anyway and get it working on a traditional way. GPS chipset only.
i don't use A-GPS and I still have this problem.
ady_uaic said:
i don't use A-GPS and I still have this problem.
Click to expand...
Click to collapse
A-GPS comes on automatically alongside with the proper GPS. You cannot specify it.
I have noticed that I loose signal when the GPS is running otherwise it's fine
I hope Toshiba fix this soon, it does get annoying!!
No sound on Toshiba TG01 for IGO App,
I got the GPS to work with the Virt serial but I cannot get the sound to work at all. Has anyone got the voices to work?
BiG K said:
A-GPS comes on automatically alongside with the proper GPS. You cannot specify it.
I have noticed that I loose signal when the GPS is running otherwise it's fine
I hope Toshiba fix this soon, it does get annoying!!
Click to expand...
Click to collapse
Dear friend, that's odd, GPS and phone are separated because if you switch off the phone (Fly mode) , GPS still works perfectly...
Pere said:
Dear friend, that's odd, GPS and phone are separated because if you switch off the phone (Fly mode) , GPS still works perfectly...
Click to expand...
Click to collapse
Not on the TG01, which is the problem, when the phone is in flight mode (or no sim card) the GPS fails to work! Which makes me question if A-GPS which works through the cellular network has something to do with all the problems......
BiG K said:
Not on the TG01, which is the problem, when the phone is in flight mode (or no sim card) the GPS fails to work! Which makes me question if A-GPS which works through the cellular network has something to do with all the problems......
Click to expand...
Click to collapse
My GPS works perfectly without SIM card..
hello! I am new to this internal GPS thing (I used external bluetooth gps on a qtek 9000 up till now) I tried to find answers on google about how I can connect my igo8 to the internal gps and I cannot find any useful one. could you please help me with detailed instructions?
thank you!
Please Help!!!
I love this ROM, but I cannot get good GPS quality with it. I know most people have no issue with this, but my GPS on my phone has always been finicky. I updated to Build 13 and Build 13 R2...and neither one allows my GPS to work. My GPS worked (although not really well) with all the other builds.
Here is the wierd part, when I travel out of my hometown (sarasota, FL) my GPS has always worked better. I work in Ocala and with Build 13 my GPS worked the other day, but not when I got home. I tried with the tweaks listed below and I tried before installing any tweaks, no luck...
I installed these tweaks:
GPS Registry - Alltel: http://forum.ppcgeeks.com/attachment...0&d=1237009140 (direct d/l link FYI)
Turbo_GPS_Settings: http://forum.xda-developers.com/showthread.php?t=496800
Any help would be great, because GPS is my favorite feature on this phone.
**edit: I am using Google Maps**
Edit/Delete Message
did you check your GPS signal? I recommended checking it out three times...
I checked the GPS Watcher program if that is what you are asking...
In Startmenu, System Tools, GPS Viewer,
COM port #4, or simply COM4 4800 BAUD and hit OPEN wait 20 seconds or so until signal settles down.
Please post signal(numbers inside bars) and number of sats detected.
That software has a bug that when you do get a fix, it doesn't tell you until you switch tab back and forth.
Reason I'm asking for this is that I want to make sure your GPS unit can receive signal before messing with anything else.
Reg hacks and roms are not going to help if your GPS unit is defective, right?
here is a screenshot of GPS Viewer. This is from Ocala, Fl were my gps works fine. When I am in Sarasota, fl (hometown) the GPS viewer finds no satellites.
From the looks of the numbers, it seems like to me that either your phone is located so that sky view is obstructed with something metallic or your inside building with windows. Right?
One you posted above is when GPS is operational, so, by comparing this screenshot with the other screenshot with GPS non-functional it will greatly help out in finding what is actually wrong.
As you might have figured out already, I prefer data collection first and then action later.
This might be a redundant question, but have you gone into your phone settings to make sure that Location settings are turned on? After that make sure that AGPS is enabled.
Yes NFSFANs rom has those settings by default, but thanks.
Here is the GPSViewer when I run it at my house. I had to leave it outside on my table for about 3-4 minutes and this is the signal I recieved. There were a few more bars but by the time I picked it up and ran CapSure they were gone...
Both were taken on a clear day outside of a building that obstructs the view slightly, but not enough to have much difference.
Oops I forgot the picture, here it is:
Did this happen recently? Some satellites go offline and online periodically and you just may be happen to be in the area where signal dark occures.
or
Test with other Touch Pro phones nearby to confirm your GPS module pretty insensitive or not.
This is all I could think of, good luck.
zsunsun said:
Did this happen recently? Some satellites go offline and online periodically and you just may be happen to be in the area where signal dark occures.
or
Test with other Touch Pro phones nearby to confirm your GPS module pretty insensitive or not.
This is all I could think of, good luck.
Click to expand...
Click to collapse
It has been weak since I have owned the phone. It has however worked in Sarasota 90% of the time and works in Ocala all the time.
The main issue I want resolved is why my GPS worked on NFSFANs 112 Rom and before, but doesn't work on 113 R1-3
Can anyone else help with this?
Can anyone tell me if that GPS Viewer app will display MPH (as opposed to km/h).
The GPS on my TP seems weak/inaccurate as well. I had a Mogul before & the GPS on it was dead on. I have had 2 TPs; the first one was horrible @ acquiring a signal. Even after using QuickGPS, it would still take forever outside. The one I have now acquires much faster, but tracking still is not as accurate as my Mogul.
I just did a hard reset and now my GPS doesnt work. It was fine before, I have the current MR1 rom update, and all was fine before. Now it just wont find any satellites. I have all the settings right, location on, Com4, 4800baud, managed by windows... I dont know what else to do other than another hard reset. I called verizon tech support, no help there. We did try VZ navigator, and it worked.
Jason
Change your radio. Happened to me and that was the culprit.
guys, i can't let the gps using satellite in my optimus one to work...
always says "Waiting for location" .... like using the carhome or the navigation bundled applications pre-installed...
any fix please?
You have to wait for a lock. That's normal.
Also, Try waiting for a lock outdoors. GPS signals aren't as strong as the ones used in SMS and stuff.
@ kp
ive tried waiting for quite a long time but nothing happened...tried also outdoor but the same...
ive tried using GPS Test application to located GPS Satellites, and indeed it can locate some with low to average signals...but when i am going to use the pre-installed applications for tracking my location, it still can't.
ive searched the net and someone also is having the same problem using LG Optimus One as well.... >.<
Depending on your firmware this might be a bug. There were GPS problemes reported with certain firmwares. But you have to be patient too, because sometimes it takes a while until 2 or more satellites are found and locked.
You can try using free app like "Ulysse Gizmos" on monitoring gps, especially on lockon status.
& also try this tips to access the internal gps test menu @ link: goo.gl/ZFs6D
Our LG Optimus One P500 code is 3845#*500#
Do let us know how it goes.
Good luck!
I use the P500 whitout a data connection. So does have a sense set the gps in A-GPS or if i have the data not active i have to set it in a GPS Standalone?
restart phone and try again
are u using da stock rom?
@Hesediel
If you don't have data conection you cann't receive any maps, but it's no problem to use a-GPS. But without data you will simply have the geo-data, no maps. So that seems to make no sense.
Micky_G said:
@Hesediel
If you don't have data conection you cann't receive any maps, but it's no problem to use a-GPS. But without data you will simply have the geo-data, no maps. So that seems to make no sense.
Click to expand...
Click to collapse
Yes but i would like to buy an offline navigator like sygic, copilot, ndrive, something like that not the google maps/navigatopr for now, so it's better i use gps as standalone or is the same setting it as a-gps ms based?
it's a known problem.
I've got a p500 without data connection (I'm using wi-fi only).
The first week after flashing my phone the gps works fine.
Then afer a week the gps fix begins to be sloooow.
After a month it is very slow.
So I have to do an hard reset to turn the gps works well again.
Any utility (like gps status) that try to reset the gsp... fail.
The only known solution... is a ... sadly... hard reset.
I hope the someone will be able to write an application to do the same thing like the gps hard reset.
Use fasterfix, you can find this in android market.just search for "fasterfix"
Requires root, busybox and data connection during the initial GPS lock time.
Your gps will get a fix within seconds.
Sent from my LG-P500 using XDA App
I have a problem with custom rom ( openoptimus) and gps.It takes to much time to lock to gps and sometimes i have to reset the phone in order to work...I have download the faster fix but it hasnet work
pudenee said:
it's a known problem.
I've got a p500 without data connection (I'm using wi-fi only).
The first week after flashing my phone the gps works fine.
Then afer a week the gps fix begins to be sloooow.
After a month it is very slow.
So I have to do an hard reset to turn the gps works well again.
Any utility (like gps status) that try to reset the gsp... fail.
The only known solution... is a ... sadly... hard reset.
I hope the someone will be able to write an application to do the same thing like the gps hard reset.
Click to expand...
Click to collapse
Well, i have the same problem and used the same solution. But now I just wait. Sometimes I "cold start" gps with GPS Status or even the "hidden" gps test menu and after waiting a little or a lot (30s or 10min) I get GPS fix. Anyway, restarting the phone seems to work well too.
Hello,
I get a GPS fix within 10 seconds. But with Maps, however, the signal jumps back and forth. Also, the signal does not show exactly the location, or a few meters away. These problems are probably also known to the UMI users. Somehow I have read what of MTK tools, where this problem can be fixed. Can someone post a tutorial, or link?
Thx.
Hi, looking forward to fix the same issue... Any news?
Octavius_Augustus said:
Hello,
I get a GPS fix within 10 seconds. But with Maps, however, the signal jumps back and forth. Also, the signal does not show exactly the location, or a few meters away. These problems are probably also known to the UMI users. Somehow I have read what of MTK tools, where this problem can be fixed. Can someone post a tutorial, or link?
Thx.
Click to expand...
Click to collapse
Gday mate,
I was having similar issues with my GPS jumping to the street next to me whilst driving and getting itself all turned around. The other issue I had was bluetooth would not connecting to my car, so I tried a few things on this list: http://www.theandroidsoul.com/fix-nougat-bluetooth-issues/
Specifically what seemed to fix my bluetooth AND GPS was this: (I also set the passcode on the car to '0000')
"This is a really good fix, confirmed to work by many people. To reset your Bluetooth settings, fire up the Settings app, and locate and tap on Backup & reset option. Now, touch ‘Network settings reset’, and then ‘Reset settings’. Confirm this on next screen. Note: This will reset all your settings related to WiFi, Bluetooth and mobile data. Keep that in mind. If you need WiFi urgently, then better do this later on."
The above made my GPS a bit more stable. Since then I have updated the device to the latest beta: PLUS.V3.02_20170208_c239v55_kw_u3_no-DB and GPS is working perfect now. Link from bencebacsi on UMi Forum: http://www.mediafire.com/file/hh1069alx7v8i6i/PLUS.V3.02_20170208_c239v55_kw_u3_no-DB.rar
Best of luck mate!
hello guys!I bought the Umi plus a week ago.The device is pretty cool but i have issues with the gps.I tryed fix it with some youtube videow but still nothing.Can please anyone have found a solution for this problem?
shadimar69 said:
Gday mate,
I was having similar issues with my GPS jumping to the street next to me whilst driving and getting itself all turned around. The other issue I had was bluetooth would not connecting to my car, so I tried a few things on this list: http://www.theandroidsoul.com/fix-nougat-bluetooth-issues/
......
Click to expand...
Click to collapse
It's not usable for this problem.
I tested Faster GPS after rooted, MTK tools, Engineering Mode, and another more tools and tricks, and nothing helped me with better gps signal on my UMI plus.
In enginneering mode I deleted data from hot, cold, warm and full gps start without A-GPS started, A set position from detected position, download new satellites positions, then start A-GPS and it was same how before. GPS signal on Mediatek chipset is bad.
Sometimes I have fixed 12 satellites, another time zero satellites. Gps signal jumping from zero to good in the car, or outdoor.