After searching high and low for a simple but eye-appealing stock quote and stock chart utility that I could use with ThrottleLauncher, I finally gave up and put one together myself. I call it ThrottleStocks.
I would like to acknowledge APBilbo for creating ThrottleLauncher. It ROCKS! I would like to also acknowledge the "PocketStock Center" work over on TreoCentral.com which helped give me the idea.
Release History:
V1.3 (28 Jan 09)
- changed chart source to www.marketwatch.com
- added week, month, 3month, 6month, 1year, and 2year stock charts
- added ability to edit stocks you've already entered into the database.
Important: If you are updating from a previous version then you will need to edit each of the stocks in your portfolio and change the chart stock symbol from the old Google one to the new www.marketwatch.com symbol.
V1.2 (26 Jan 09)
- fixed path to Mortscript and stock download scheduling
V1.1
- tried to improve error handling with stock downloading
Pre-Requistes:
1. You need ThrottleLauncher 0.9.6 installed (obviously)
2. The installation instructions below assume you are using APBilbo's TouchFlo3D theme that he distributes with ThrottleLauncher
3. You need Mortscript installed
4. You have the Segui fonts installed in your Windows\Font directory. If you don't you can find the fonts attached here. Unzip and place in windows\font directory.
To install:
1. Extract the attached zip file into your ThrottleLauncher\Setups\TouchFlo3D directory.
2. Start ThrottleConfig and Configure TouchFlo3D. On the new Stocks page choose whether you want the "Advanced" or "Basic" layout.
3. Enable the new "Stock" page in the TouchFlo3D config. Save and reload ThrottleLauncher
4. When ThrottleLauncher restarts you'll see a blank Stock page with buttons along the bottom. The first thing you'll need to do is click on the Settings button (it looks like a gear). This will open up the stocks config menu where you can perform the following;
a) Setup stock quote download schedule. Set the start and end time to download quotes, and the interval in minutes. Note that stocks will only be downloaded on week-days.
b) Enabled/Disable Stock Intra-Day chart downloads. If you are using the "Advanced" layout in ThrottleLauncher you'll need to Enable intra-day chart downloading. If you just want the basic layout you can leave chart downloading disabled and save on data downloading
c) Add stock. Here you'll be asked for the stock name, and the stock symbols. Note that currently it asks for both the stock symbol on Yahoo and on Google. The reason for this is that the quotes are downloaded from Yahoo while the charts are downloaded from Google and the stock symbols are not always the same on both sites. You'll be asked how many stocks you own and how much you paid for them...you can leave this blank as currently this data is not used.
d) Delete stock. Enter the stock symbol and it will delete it from the database.
e) Edit stock. Enter the stock symbol of the stock you want to edit...this will let you then modify its name and stock symbols.
f) Force chart refresh on exit. By default the 1month to 2 year stock charts are only downloaded once per day. If you select this option it will force an update of all the stock charts.
g) Exit. When you exit the setup it will automatically start a download of the stock data.
5. After the stock data has downloaded you will likely need to restart throttlelauncher in order for the stock page to display correctly.
Known Bugs/Issues:
This is a work in progress. The known issues are;
1. When stock charts are downloading there is a progress window that appears. I don't know yet how to get rid of this...but am looking into it.
2. ThrottleLauncher is currently unable to have a dynamic list. Currently the stocks.xml file is hardcoded to have 9 stocks displayed on the page. If you have more or less stocks in your portfolio you may want to edit the stocks.xml file and adjust the file accordingly. Look for the text in="1,2,3,4,5,6,7,8,9" and add or remove numbers accordingly. Note that there are two spots in the xml file where this is used. Hopefully this will get fixed in a future release of ThrottleLauncher
3. The stock tabs along the right side of the screen (in advanced layout) do not update their color correctly. This is a TL bug that is said to be fixed in the next TL release
4. Clicking on the stock chart is suppose to take you to the yahoo web-page for the stock. This doesn't work correctly at the moment.
Nice work, looks great!
my god this is great
there are people in this forum who're like Logitech. everything they do is impeccable.
one request tho.. and i hope it's doable.
is there a chance you could convert it to a regular today plugin so that people who're not using throttle launcher can use it?
This is awesome. great job!
Installed this and this causes my throttlelauncher not not load.
JukEboXAuDiO said:
Installed this and this causes my throttlelauncher not not load.
Click to expand...
Click to collapse
Sorry!
A couple things to check;
1) You are using the TouchFlo3D theme that APBilbo released with TL v0.9.6
2) Prior to enabling TL you ran TL config and configured TouchFlo3D (enable Stock Tab)
3) Try running the StockConfig.mscr mortscript before enabling TL... It can be found in TouchFlo3D\Throttle Stocks\mscr
Ant plans to port this to the VGA Iphone theme?? The homepage has room for two new programs...
Thanks
24 hr Review
Using Hermes 6.0 and TL 9.6 and no problems whatsoever , well done! It runs faster than my shares are falling and looks great (only used advanced version to date). Incidentally I did not install to TouchFlo3d but straight into my own custom theme yet it still worked ok except I lost my own custom footer icons, I can still see the xml so am placing them into black n blue tonite. Thanks again
I've updated the mortscripts to try and make the stock download process more tolerant of errors (particularily timeouts). See 1st post for update.
I still haven't figured out how to stop Mortscript from display the download progress window...
I've updated the theme and scripts to now include week, month, 3month, 6month, 1year, and 2year stock charts. See the first post for the new v1.3
Version 1.3
Working very well, a good improvement, thanks.
thanks to you Great Job man!!!
Your program looks good from description but I couldn't install it correctly since I am using Throttle Launcher 1.0 RC1 (the config.xml doesn't work). Any plans to upgrade to work for TL 1.0? I would love to try and get it working. Or perhaps you could guide me in tweaking so it will work for TL 1.0. I am newbie at this so any help would be greatly appreciated.
johnko said:
Your program looks good from description but I couldn't install it correctly since I am using Throttle Launcher 1.0 RC1 (the config.xml doesn't work). Any plans to upgrade to work for TL 1.0? I would love to try and get it working. Or perhaps you could guide me in tweaking so it will work for TL 1.0. I am newbie at this so any help would be greatly appreciated.
Click to expand...
Click to collapse
If you use the TouchFlo2d theme, the Stock tab is already there. You can download that theme in the ThrottleLauncher website.
stock quotes are real time or 20 min delay?
thanks
pinktaco said:
stock quotes are real time or 20 min delay?
thanks
Click to expand...
Click to collapse
Stock quotes are from finance.yahoo.com
Stock charts are from www.marketwatch.com
These are not real-time sources. I'm not sure what the delay is.
great prog man! any further with hiding the update window? could it be changed to smaller graphic MB introduce a container for the update process? Keep up the good work man!
There are more and more themes coming up for WM 6.5 Titanium, which are not only tsk, colors etc, but also change greatly the Titanium....x......cpr file and the registries. When one wants to change from one such theme (for example WM7 project) to another (for example Shadow Neo Skin) the former theme has to be removed, and the new one has to be installed and customized, sometimes the plugins have to be reinstalled.
The theme switcher has the following capabilities:
- Backing up the existing theme, grafics files, cpr files, registries, so that it can easily be restored
- Installing the new selected theme
New beta release:
Supported resolutions QVGA, WQVGA, QVGAsquare, VGA, WVGA, VGAsquare... It only works with WM 6.5. You need to have MortScript installed.
IMPORTANT: First of all this will be replacing your Titanium cprs and bronzeres.dll files, so pls. make a backup of your original files.
Installation:
1. Unzip the enclosed file TitaniumThemes to Storage Card.
2. Have all the plugins installed that you want to have in your Titanium screen, so that
the themes can load them.
3. It is not necessary to install all themes, as i have collected all images needed by the
theme and stored them in folders inside the TitaniumThemes folder, so the images will not
clutter your Windows folder. The modded cprs point to this images. Below you find the
links to the corresponding themes threads, so that you can check out how the theme
looks, and say thanks to the theme designer for his nice work.
4. Run the "Install Titanium Theme Changer.mscr" from the apps folder in TitaniumThemes,
choose your resolution and click ok, this will install all supported themes cprs in Windows
and a shortcut for "Titanium Theme Changer. mscr" in Windows/Start Menu/Programs.
5. Run the shortcut "Titanium Theme Changer", select the theme you want to apply and in
a few seconds it will appear on your screen.
6. Apply the tsk of your choice
As said it is a beta version and it might have still some bugs, or errors in the cprs, as i only have a QVGA device, pls. report them.
I could have not done this without the help of many people, like BigDaddyG, RoryB and egoist6 from the MortScript thread, TWolf, drkfngthdraglrd and many more, so thanks to all.
Also please consider that i in no way designed the themes, i only modified the cprs for easy switching, so all thanks go to the themes builders.
Most of the plugins are supported in my cprs, like
All standard plugins
TWolf Multiplugin
http://forum.xda-developers.com/showthread.php?t=523015
JMLToday
http://forum.xda-developers.com/showthread.php?t=540413
IsmToday
http://forum.xda-developers.com/showthread.php?t=535682
AnalogClock
http://forum.xda-developers.com/showthread.php?t=511483
CLauncher, CSettings, CGames, CApps1
http://forum.xda-developers.com/showthread.php?t=514490
CManilamenu 1 to 3
http://forum.xda-developers.com/showthread.php?t=537237
COffice
http://forum.xda-developers.com/showthread.php?t=510362
Titanium Weather
http://forum.xda-developers.com/showthread.php?t=481379
CComm
http://forum.xda-developers.com/showthread.php?t=513747
Settings
http://forum.xda-developers.com/showthread.php?t=515979
System
http://forum.xda-developers.com/showthread.php?t=510051
CVolume
http://forum.xda-developers.com/showthread.php?t=512529
CFacebook
http://forum.xda-developers.com/showthread.php?t=510479
CTwitter
http://forum.xda-developers.com/showthread.php?t=510360
Taskanium
http://forum.xda-developers.com/showthread.php?t=515586
CSchedule
http://forum.xda-developers.com/showthread.php?t=557725
AT FavePeople
http://forum.xda-developers.com/showthread.php?t=506221
Opera Favorites
http://forum.xda-developers.com/showthread.php?t=496758
ArteseaTwitter
http://forum.xda-developers.com/showthread.php?t=511919
Themes:
Bliss
http://forum.xda-developers.com/showthread.php?t=508968
Shadow Neo
http://forum.xda-developers.com/showthread.php?t=524979
Neo Titanium
http://forum.xda-developers.com/showthread.php?t=534553
Buffed and Lizzy
http://forum.xda-developers.com/showthread.php?t=528935
Josito
http://forum.xda-developers.com/showthread.php?t=556378
WM7 project
http://forum.xda-developers.com/showthread.php?t=504716
Could not upload here the zip file, so pls. dowload it from 4shared.com
http://www.4shared.com/file/140139192/882eec04/_3__TitaniumThemes.html
I want that theme。THS!
[email protected]
I was thinking the same thing and M2DC comes the closest to mind. We need to get mpenguin14 a device and encouragement to modify it for WM6.5...
mchapman007 said:
I was thinking the same thing and M2DC comes the closest to mind. We need to get mpenguin14 a device and encouragement to modify it for WM6.5...
Click to expand...
Click to collapse
I am working on such a theme switcher, done in MortScript. I have a folder named TitaniumThemes on my Storage Card. Inside there i have a folder backup where i save the current theme (Titanium_XXXxXXX.cpr (both P and L), bronzeres.dll and CHome registry). I have also a folder for each of the themes, currently WM7, TitaniumBuffed, TitaniumShadowNeo, Bliss, BlackDragon, where i stored the same files for the theme tweaked and set up to my liking. All themes have first to be installed, as some of them store in Windows some files like icons etc, or they create a folder under Program Files with those files. I tried first manually to swap this files and it work very nicely. Now i am trying to make Scripts to do this work, but i am a complete noob in scripting and have following problems:
1. I need to disable Windows Default to be able to copy bronzeres.dll to Windows, and i dont know the command for it.
2. I need to read and save the whole CHome registry (export) and also to import the themes CHome registry. This should be doable with MortScript but i found only how to import/export single keys and dwords in the manual.
3. At the end i have to enable again Windows Default.
When i could solve this points i would have a simple script based program to backup/restore the current theme, and to switch themes choosing from a menu.
you should be able to replace bronzeres.dll without the need to disable titanium. In order to refresh titanium after changing the theme you can use chomerefresh.exe provided by appstar. PM me If I can be of any help
rpereira said:
you should be able to replace bronzeres.dll without the need to disable titanium. In order to refresh titanium after changing the theme you can use chomerefresh.exe provided by appstar. PM me If I can be of any help
Click to expand...
Click to collapse
In fact that was my first approach, to copy the files to windows and then refresh chome, but it is not working. Even when copying manually the files with total commander, i can do that for both titanium cpr files, but as soon as bronzeres is copied an error message comes up. So it looks like bronzeres needs titanium to be disabled before copying, when i disable titanium manually the script copies everything correctly to windows. So i have to find the command to disable/enable titanium.
On the other hand i have still problems to find the way to backup/restore the complete chome registry. I tried also to look inside the Sashimi script to find out how it is done there, but i am too much of a noob and could not figure it out (too many subroutines pointing from one to the other).
I had thought about doing this before but with a more ambitous approach that would have required theme makers to include an .xml file together with their theme. this .xml would include a list of all of the theme files and their destination directory, since not all themes are the same, some people replace bronzeres.dll and some others don't, so it's hard to tell unless you have a list of what to apply and what to remove.
Disabling titanium, as far as my research has gone, it's not possible with mortscript alone. These are lower-level system functions that can be found on C++, just like chomerefresh.exe which is also built on C++. Getting more complex as we dig deeper into it.
but, I still have faith in being able to replace the .dll without disabling windows default first, have you tried using mortscript's file attribute change to change the .dll's attribute from read-only to normal file before copying. I still do believe we'll need to standardize themes.
rpereira said:
I had thought about doing this before but with a more ambitous approach that would have required theme makers to include an .xml file together with their theme. this .xml would include a list of all of the theme files and their destination directory, since not all themes are the same, some people replace bronzeres.dll and some others don't, so it's hard to tell unless you have a list of what to apply and what to remove.
Disabling titanium, as far as my research has gone, it's not possible with mortscript alone. These are lower-level system functions that can be found on C++, just like chomerefresh.exe which is also built on C++. Getting more complex as we dig deeper into it.
but, I still have faith in being able to replace the .dll without disabling windows default first, have you tried using mortscript's file attribute change to change the .dll's attribute from read-only to normal file before copying. I still do believe we'll need to standardize themes.
Click to expand...
Click to collapse
It is possible to disable and enable titanium with mortscript, it is just a registry HKLM/Software/Microsoft/Today/Items/Windows Default, set Enabled to 0, then RedrawToday. The same to enable it, only set to 1.
I posted my scripts like they are now in the post below, asking for help to make them work, in the Mortscript examples thread. It still does not work to
replace bronzeres.dll, but i will look into your suggestion to change the attributes to normal before copying. The strange thing is that when i do everything manually with total commander with the titanium disabled it works flawlessly. On the other hand you are completely right, the themes are not standardized, but normally, with all the themes installed before, so that all the needed files are there, and then by replacing the above mentioned files it works. Thanks a lot for your help.
http://forum.xda-developers.com/showpost.php?p=4088840&postcount=1619
First try for an alpha version of the Titanium Theme Switcher. Download from the first post.
Hey claus - I only want to say how much I appreciate your work! It's really hard - especially to save everything, that nothing will be destroyed.
For bronzeres.dll - you must find a way to unload this .dll for changing - I'm not sure, if Mortscript can do it. If you need help - please tell me.
But perhaps you need no unload...this little needful thing could help, which I append
I use them very often by shortcut in StartMenu - especially "disable all" to switch off all todays and "EnableTitanium" - because I'm to lazy to go to my Home-Settings... (please comment iPhoneToday-Lines, if you don't have it - or make a check to Registry-Key, if it's exists)
Some questions:
- When can we expect a VGA-Version?
- Do you have a more technical implemention description how it works?
- What's the problem with cabbing? Perhaps I can help you
Thanx 4 all
Micha
MichelDiamond said:
Hey claus - I only want to say how much I appreciate your work! It's really hard - especially to save everything, that nothing will be destroyed.
For bronzeres.dll - you must find a way to unload this .dll for changing - I'm not sure, if Mortscript can do it. If you need help - please tell me.
But perhaps you need no unload...this little needful thing could help, which I append
I use them very often by shortcut in StartMenu - especially "disable all" to switch off all todays and "EnableTitanium" - because I'm to lazy to go to my Home-Settings... (please comment iPhoneToday-Lines, if you don't have it - or make a check to Registry-Key, if it's exists)
Some questions:
- When can we expect a VGA-Version?
- Do you have a more technical implemention description how it works?
- What's the problem with cabbing? Perhaps I can help you
Thanx 4 all
Micha
Click to expand...
Click to collapse
Hi Micha
Thanks for your offer. In fact it took me some time to sort this out. Now it is working as i apply bronzeres.dll with a cab, so i don't need to disable Titanium. At the end i refresh Titanium so everything gets updated. The idea is later to avoid swapping out bronzeres.dll, when all theme builders make their themes without changing bronzeres.
A VGA version should not be difficult the only problem i have is that i only have a QVGA device. The cprs i have included are the themes cprs for QVGA, complemented with most of the plugins and some modded by me to get support for the plugins. I am still working on some icons and layouts. If someone with a VGA device has cprs for this themes filled with all the most used plugins i would be very grateful to receive them so i could put together a set for VGA. The same also for other resolutions. This shall be a theme switcher, so i am not interested for skins which can be changed by applying the corresponding tsk.
The way the theme switcher works is very very simple, and it works with Mortscript:
The themes must be installed first, all of them. Then we copy into windows the cprs for all this themes, Titanium_240x320.cpr and 320x240.cpr, Neo_240x320.cpr and 320x240.cpr, Lizzy_240x320 and 320x240.cpr etc etc.
By calling the themes menu mscr the menu pops up with all available options:
Save the current theme: This backs up the currenty active Titanium cprs and bronzeres.dll, so that one can revert back to what he had.
The next buttons are for applying any of the themes. This is done by inserting in the ExtensibilityXML registry the name of the cpr to be used, without touching the rest of the information in this registry, that means your personal plugin setup (active plugins and their order) stays the same. Then the corresponding bronzeres.dll is loaded by cab and when available the themes tsk is applied. At the end Titanium is refreshed and the theme has been changed.
As said this is still a bit rudimentary and i will with the time make it smoother and apply some cosmetics to make it look better.
The problem with the cab is that i have only built very simple ones like for loading bronzeres.dll into windows. For this i would need a cab which:
1. installs all the themes,
2. copies the TitaniumThemes folder into storage card,
3. copies all cprs into windows and the shortcut into start menu/programs
I almost thought, that you're doing i like that... it's not rudimentary - it's a very good way Perhaps a little bit to complicated for some things (why not using ExtensibilityXML to approve only Plugins, which works with the skin). Thanx for explanation.
But one thing... I don't know if you assume this will be in future, that's noboy would change the bronzeres.dll - I think not all developers will know this way - and there will be much more edits in future of other Titanium-Files perhaps - I would save it and have a look, that it would work with and without Bronzeres. Save the differences of each installation to the original theme - and you mustn't care for such things (I know - that's very rudimentary - but how do you say in english: If the mountain won't come to Mohammed, Mohammed must go to the mountain )
I will have a look for my VGA-cpr - at the moment I haven't very much installed.
To your problems:
The problem with the cab is that i have only built very simple ones like for loading bronzeres.dll into windows. For this i would need a cab which:
1. installs all the themes,
What's the problem there? The themes are all installed by cab - so alltogether should also be installed like cab - Perhaps - I don't now - you must only cascade the .cabs in Installation - with between "saving" - that could work
2. copies the TitaniumThemes folder into storage card,
*g* For this case you asked in the other thread. In this case... make an installer after installation (I think you have JMLToday ( *link*), too? - you know what appears after Installation? In this script you could put the copy...
If you want to make it International... why not putting the Name of "Internal Storage" in the language-File? Or: Ask the user, where he wants to have his "Save-Files" - then you have the complete working path for you.
There's no reason to put something in a .cab, which canbe much easier done after installation. You need it anyway the whole time if somebody creates a new Titanium Skin - or should then the cab be reinstalled?
3. copies all cprs into windows and the shortcut into start menu/programs
Same as 2. - only back... and how to add Shortcuts in an .inf-File - I think that you already knows, right?
Keep up your good work - when it's working - than very much people will know, for what you'd make this effort!
Thank you
Micha
MichelDiamond said:
I almost thought, that you're doing i like that... it's not rudimentary - it's a very good way Perhaps a little bit to complicated for some things (why not using ExtensibilityXML to approve only Plugins, which works with the skin). Thanx for explanation.
Click to expand...
Click to collapse
I did not want to touch the rest of ExtensibilityXML because i want to leave the setup of the plugins everyone already has. Anyway only the plugins supported by the theme will show up.
But one thing... I don't know if you assume this will be in future, that's noboy would change the bronzeres.dll - I think not all developers will know this way - and there will be much more edits in future of other Titanium-Files perhaps - I would save it and have a look, that it would work with and without Bronzeres. Save the differences of each installation to the original theme - and you mustn't care for such things (I know - that's very rudimentary - but how do you say in english: If the mountain won't come to Mohammed, Mohammed must go to the mountain )
Click to expand...
Click to collapse
Some developers to which i have talked are willing to change their approach and try to leave bronzeres untouched for the next versions of their themes. Anyway the possibility to swap bronzeres is in the script and it is working well. I have fried to chnage theme without bronzeres at the beginning but for most of the themes the slider panel image is in bronzeres, so it does not look good without changing it.
I will have a look for my VGA-cpr - at the moment I haven't very much installed.
Click to expand...
Click to collapse
Thanks i will appreciate that.
To your problems:
Click to expand...
Click to collapse
The problem with the cab is that i have only built very simple ones like for loading bronzeres.dll into windows. For this i would need a cab which:
1. installs all the themes,
What's the problem there? The themes are all installed by cab - so alltogether should also be installed like cab - Perhaps - I don't now - you must only cascade the .cabs in Installation - with between "saving" - that could work
Click to expand...
Click to collapse
Yes i was thinking doing it like this but i have only done the very sinple cabs to install bronzeres up to now using the cab wizard, so i really am offside with building cabs.
2. copies the TitaniumThemes folder into storage card,
*g* For this case you asked in the other thread. In this case... make an installer after installation (I think you have JMLToday ( *link*), too? - you know what appears after Installation? In this script you could put the copy...
If you want to make it International... why not putting the Name of "Internal Storage" in the language-File? Or: Ask the user, where he wants to have his "Save-Files" - then you have the complete working path for you.
There's no reason to put something in a .cab, which canbe much easier done after installation. You need it anyway the whole time if somebody creates a new Titanium Skin - or should then the cab be reinstalled?
Click to expand...
Click to collapse
You are right on this, the script could be launched after installation and just copy the TitaniumThemes folder into Storage Card. I did choose this name as i used it in my scripts but i could change it to Internal Storage to suit the needs of non WWE users, for you it would be Speicherkarte right?
3. copies all cprs into windows and the shortcut into start menu/programs
Same as 2. - only back... and how to add Shortcuts in an .inf-File - I think that you already knows, right?
Click to expand...
Click to collapse
Ok, can go in the same script, i thought pakaging everything into 1 cab install would be easier but you are right.
No - not "Speicherkarte" "Interner Speicher" would be the word, which Microsoft has chosen...
With Cab-Wizard you won't have any chance... you need the .inf-File... and I know... it's hard... there's no description for our purpose at one place - I had to seek very much around until I had the cab-concept e.g. for JMLToday.
But so I could help you - I will make bytheway a description with a .cab-Frame for JMLToday 5.3 - but I can give you the additional informations what you need to get it work with AT Plugin Installer.
Therefore I would need the complete directory-structure, which you want to cab... and a little time...
Send me a private message, ok? Don't want to blow up your Thread with Things that doesn't concern all users.
I am working to iron out the cprs for the different themes, to get support for most of the plugins out there today. When they are ready for QVGA i will try to resize them for the other resolutions with the new tool that came out, and post them for you to test them for me in your devices. When they are working well i can post installers for all resolutions.
I need information of which themes people is using to see which ones are worth to be included in the theme switcher, so pls. vote in the poll.
Cool Claus, but the poll isn't good
You develop a Theme Switcher - and in the Poll you can only choose one Theme
MichelDiamond said:
Cool Claus, but the poll isn't good
You develop a Theme Switcher - and in the Poll you can only choose one Theme
Click to expand...
Click to collapse
You are totally right Micha, it was late when i posted the poll and forgot to change the option to let choose several options. Now i don't find how to change this option. Any mod can help me do that?
There are some resized cprs to be tested on the first post for VGA and WQVGA. If someone with this resolution has TitaniumShadowNeo or WM7 theme installed could test them, i would be grateful. Pls. don't forget to backup your Titanium cprs first.
Will be happy for any feedback to correct the cprs.
claus1953 said:
There are some resized cprs to be tested on the first post for VGA and WQVGA. If someone with this resolution has TitaniumShadowNeo or WM7 theme installed could test them, i would be grateful. Pls. don't forget to backup your Titanium cprs first.
Will be happy for any feedback to correct the cprs.
Click to expand...
Click to collapse
I have been waiting so long for someone to do this. Thank you.
Here are screenshots of my 2 real issues so far.
1) The is no icon for the SMS/MMS panel.
2) notice how the word phone is cutoff on the Phone panel.
P.S. I am using it on a Diamond
goraps said:
I have been waiting so long for someone to do this. Thank you.
Here are screenshots of my 2 real issues so far.
1) The is no icon for the SMS/MMS panel.
2) notice how the word phone is cutoff on the Phone panel.
P.S. I am using it on a Diamond
Click to expand...
Click to collapse
Thanks for testing it, i will look into the missing icon and move the text a bit up for this panel tomorrow, and repost the cprs. Are those the only issues you found?
please i have a problem
i install any theme successfully but it doesn't appear even after restarting the mobile
and every time i try to change the wall paper i chose one from wallpapers then it doesn't appear also
please someone help me
Roushdii said:
please i have a problem
i install any theme successfully but it doesn't appear even after restarting the mobile
and every time i try to change the wall paper i chose one from wallpapers then it doesn't appear also
please someone help me
Click to expand...
Click to collapse
first welcome on xda.
Secondly with some more information it was easilyer to help, but here we go.
mostly themes are package in a cab file, so you download it, copied it to your Sd where ever you will, navigate with your explorer (from your device) tho the path on your sd where you storage the cab file, press on the cab file you will install. You will see a new window open who ask the installation path. select internal memory (do always this fore themes/skins) after installation do a quick restart of device and that's it.
about the wallpaper, go to the setting tab, select background & wallpaper, navigate to the image you would, and select it. that's all.
if you will have a wallpaper fore each tab make use if CHT
in case of something isn't clear contact us again, and give some more information about what you will and problems you have.
first of all thanks alot for your help
now themes are good cuz i was installing on storage card , but now i install on device memory and it is okay
the problem is that i can't change home wall paper ,,
i tried to change it from sitting , home wallpaper ,,,, but it doesn't respond ,, i mean every time i chose a wallpaper it makes no change
Roushdii said:
first of all thanks alot for your help
now themes are good cuz i was installing on storage card , but now i install on device memory and it is okay
the problem is that i can't change home wall paper ,,
i tried to change it from sitting , home wallpaper ,,,, but it doesn't respond ,, i mean every time i chose a wallpaper it makes no change
Click to expand...
Click to collapse
the actually state is it black ore the original one?
also do you use CHT? (cookies home tab)
Do you have install a other application fore background?
One thing is sure, problem is by user it's just finding out what it is
yes i installed cookies before but i removed it now and still the wallpaper nochange
Roushdii said:
yes i installed cookies before but i removed it now and still the wallpaper nochange
Click to expand...
Click to collapse
I see what you mean, it's because you remove the CHT there is a parameter who isn't present now.
Tree way's to restore.
- Restore CHT
- Install bg4all or hq wall patch.
- soft reset
I recommended the first option.