Related
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
Hi i was new to all this and installed dynamics v2.0 fully unlocked rom the other day and this is how i went about it
download this
RUU_Mozart_Orange_UK_1.24.061.35_Radio_5.50.09.18_22.24.50.09U
http://www8.zippyshare.com/v/48117282/file.html
this is a load your phone back to 1.24
to install it i did this
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial but maybe it will need to install some drivers cant remember 100%
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that then you will have your phone back to 1.24
next you can follow this post here and download the attachment at the bottom named DFT_XSPL_WP7FG1.rar this what u need for this step
http://forum.xda-developers.com/showthread.php?t=1195647
basically this is the install procedure u may need to install active sync (XP) or windows mobile device center (vista and 7) but i did not have to my phone automatically did this
DFT_RSPL_WP7FG1_LAUNCH allows you to load RSPL on the device:
1. Extract ALL files from RAR archive.
2. Run DFT_RSPL_WP7FG1_LAUNCH (with administrative rights to access USB)
3. Mindfully reads information text. Press “Next” button.
4. Reset your device and hold “Volume Down” button during reset to enter OSPL mode.
5. Connect your device to PC via USB cable.
6. Now you may need to install proper USB drivers. They come with Active Sync / Windows Mobile Device Center.
7. Install drivers if required.
8. Make sure device show “USB” at the bottom instead of “Serial”.
9. Press “Next” button in the wizard. It should detect your phone.
10. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
11. After successful connection it should show device codename and allows to choose installed OSPL version.
12. You should look at the screen and select OSPL version in drop down list box. You need do this because it’s not possible to detect installed version via USB.
If your current SPL version doesn't present in the list, you can choose nearest version,
BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
13. Press “Next”. Wait until comes final page.
14. Read and close window
15. Look at the device – it must reboot to RSPL.
16. If you see RSPLX.Y.Z and “CotullaRSPL” on the screen – the task done! Otherwise, please report in this thread about your problems.
17. Put some feedback in this thread for community and developers.
Installing HSPL
DFT_HSPL_WP7FG1_INSTALL allows you to install HSPL on the device:
1. Launch RSPL on the device like described above.
2. Be sure that you close RSPL wizard window.
3. Run DFT_HSPL_WP7FG1_INSTALL.exe (with administrative rights to access USB)
4. Mindfully reads information text. Press “Next” button.
5. Proper drivers already must be installed in RSPL step.
6. Press “Next” button in the wizard. It should detect your phone.
7. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
8. After successful connection it should show device codename and allows to choose HSPL or OSPL version to install. OSPL means you install stock SPL back.
9. Check device codename, if something wrong turn off computer and run to the nearest forest. Grab some water with yourself.
10. Press “Next”. Wait until comes final page.
11. Device will reboot and start to boot OS.
12. Reset it and enter SPL mode again. Be sure there HSPLX.Y.Z and “CotullaHSPL” appear.
13. Put some feedback in this thread for community and developers.
Now u are ready
you can find what custom rom you want i used dynamics v2.0 which can be found here and its fully unlocked aswell so all i all im pleased with it
http://forum.xda-developers.com/showthread.php?t=1520352
download it and install the same way we installed the 1.24 rom in the begining of this post
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that and then you will have loaded your desired custom rom onto your phone
I hope this helps some of u out and happy modding
best regards
steve
1.24
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
geofferz said:
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
Click to expand...
Click to collapse
1.24 im refering to the SPL you can find your version by turning the phone off holding volume down and power button and u will see your SPL at the top,
im not sure about the unlocked sim/network im new to all this aswell maybe do a search on the forums and see if you can find the answer, but i dont know this 1 sorry :/
rom is good no issues had a cable issue yesterday that wouldnt let me charge my phone but thats down to my dodgy cable
you dont have to install this rom you can use any custom rom you like or might find out there
anyways hope this helps
Launch RSPL
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
geofferz said:
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
Click to expand...
Click to collapse
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Oh also do not extract the 1.24 from the .rar file run everything from there
This is why ur getting that error I think
geofferz said:
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
Click to expand...
Click to collapse
you dont need to select a option just load ROMUpdateUtility.exe
ive just downlaoded and reinstalled the rom myself to try see what u mean and i dont get this option
when you go to bootloader screen on your phone and it says usb open the rom file and click ROMUpdateUtility.exe
now dont open active sync or mobile tools as it says on the program information
just click the tick boxes and continue through the process
maybe try download the rom again found this
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
but like i sed i have downloaded the file myself and it is working for me without any problems
beany2009 said:
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Click to expand...
Click to collapse
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
geofferz said:
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
Click to expand...
Click to collapse
lol np mate ill try help as best i can
right i understand your bit now about the dynamics rom u need to select regular on this part
custom i think would be if u want to edit it or some **** but i have no idea so u use regular mate because this is the actual rom file made but remember u must downgrade and load rspl and hspl onto your phone before doing this step
right my firmware is 2250.21.51301.401 but i dont know if this changes on installation of the downgrade and adding the custom rom like i sed im a complete noob with this myself but all went smoothly for me thats why i made the tutorial
and no mate my phone took about 5-10 mins to install the 1.24 orange rom
have u tried a hard reset first and then see if it helps with the installation
ill search around for your firmware and see if there has been issues
edit..........................................
did a search on the forums and your firmware comes up with nothing :/ did a google and only shows this thread did you type the numbers correctly?
also you mean that the rom update works sometimes and not others?
if it works once it should install it mate np's
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
beany2009 said:
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
Click to expand...
Click to collapse
again thanks for your help
ok here goes red: PD 67100 ss-BC (4k)
SPL-4.6.2250.0(129193) mng
what you think?
i think my SPL was on that before so i dont know why u are having issues mate :/
maybe wait and see if a developer can read this and give us some info on why its not working for you :/
Thanx For The Help And the Tutorial It Was very Helpfull
Now my phone Is running dynamic 2.0
hey can u tell me what other custom roms are available that i can install on my phone and if there are any different methods of installing them
no problem mate glad it helped
erm the only other custom rom i have seen on mozart is deepdishing v7.0 you can find this in the development thread inside mozart topics
and for me mate im not sure and have not seen another way of installing another custom rom but im new to all this myself
anyway glad this helpped
regards
my computer wont pick up htc 7 mozart in bootloader
can anyone help me its doing my head in .
when you connect your phone to pc in bootloader its not showing as usb on the bottom of bootloader screen?
just serial?
just to confirm. this wont work on Asian handsets.
beany2009 said:
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
steve
Click to expand...
Click to collapse
Thx for the easy to follow guide.
It worked on a telstra brand mozart using windows 8.
Sent from my GT-N7105 using Tapatalk 2
Alright. I have lurked XDA for a long time and this is the first time in seven years of WinPhone/Android flashing I have felt the need to create an account and actually ask a question myself. I really, really did try to find the answers on my own.
So here's the story: Bought an Atrix 4G when they first came out a couple of years ago. Used it for a couple of months, upgraded to Gingerbread no problem. Eventually gave the phone to my girlfriend on T-Mobile, so I had to unlock it. I was very clear with my instructions to NEVER update that phone when it prompts for it.
And she was good! For two years she used that phone with minimal problems. She switched to AT&T this summer and got a new phone, so I got the Atrix 4G back. I hadn't touched that thing in two years and when the prompt came up for an update, of course I updated it. I knew, the *instant* I hit the update button I knew, that I was not supposed to do that. I figured whatever, I want to throw Jelly Bean on it anyway, so let it go and I'll sort it all out on the other end.
Well here I am on the other end, and this thing is effed. It gets as far as the Moto logo and DUAL CORE TECHNOLOGY... and just sits. Still says UNLOCKED up in the upper left, so I guess that's a good sign.
So that's where I am now. Here are the problems I have:
-I want to upgrade this to CM 7.2.0, but first I need to be able to talk to it. Every link for the drivers I can find points directly to Motorola's (now defunct) MotoHub site. I found ONE link that didn't, and it was just an installer for Device Manager. So I can't talk to the thing.
-When I try to do a recovery, it fails and I get a splash screen that says www . goapk . com. No idea what that's all about.
-When I try flashing from a ROM on the SD card, it says it completes the install, but still will not boot past the Moto logo.
So guys, I come to you now at my most desperate hour. Help me, XDA. You're my only hope.
b0bert said:
Alright. I have lurked XDA for a long time and this is the first time in seven years of WinPhone/Android flashing I have felt the need to create an account and actually ask a question myself. I really, really did try to find the answers on my own.
So here's the story: Bought an Atrix 4G when they first came out a couple of years ago. Used it for a couple of months, upgraded to Gingerbread no problem. Eventually gave the phone to my girlfriend on T-Mobile, so I had to unlock it. I was very clear with my instructions to NEVER update that phone when it prompts for it.
And she was good! For two years she used that phone with minimal problems. She switched to AT&T this summer and got a new phone, so I got the Atrix 4G back. I hadn't touched that thing in two years and when the prompt came up for an update, of course I updated it. I knew, the *instant* I hit the update button I knew, that I was not supposed to do that. I figured whatever, I want to throw Jelly Bean on it anyway, so let it go and I'll sort it all out on the other end.
Well here I am on the other end, and this thing is effed. It gets as far as the Moto logo and DUAL CORE TECHNOLOGY... and just sits. Still says UNLOCKED up in the upper left, so I guess that's a good sign.
So that's where I am now. Here are the problems I have:
-I want to upgrade this to CM 7.2.0, but first I need to be able to talk to it. Every link for the drivers I can find points directly to Motorola's (now defunct) MotoHub site. I found ONE link that didn't, and it was just an installer for Device Manager. So I can't talk to the thing.
-When I try to do a recovery, it fails and I get a splash screen that says www . goapk . com. No idea what that's all about.
-When I try flashing from a ROM on the SD card, it says it completes the install, but still will not boot past the Moto logo.
So guys, I come to you now at my most desperate hour. Help me, XDA. You're my only hope.
Click to expand...
Click to collapse
Goapk is the recovery from I believe it was romracer or someone. Since then, there have been updated recovery.imgs that can be used. Usually the drivers install automatically when you hook up the device to the computer, but i'm assuming you're referring to adb and fastboot files? Those files are here on xda, off hand i'm not exactly sure which thread, but they are here online. If that's what you need, download them, and then via fastboot flash an updated recovery to your device, then try flashing the ROM following the usual proceedures.
palmbeach05 said:
Goapk is the recovery from I believe it was romracer or someone. Since then, there have been updated recovery.imgs that can be used. Usually the drivers install automatically when you hook up the device to the computer, but i'm assuming you're referring to adb and fastboot files? Those files are here on xda, off hand i'm not exactly sure which thread, but they are here online. If that's what you need, download them, and then via fastboot flash an updated recovery to your device, then try flashing the ROM following the usual proceedures.
Click to expand...
Click to collapse
Thank you for your response, but man I really cannot find those drivers anywhere.
I know there are two different drivers I need to have the PC driver and the USB driver... but the only thing I can find *at all* is the Motorola Device Manager. I knew I should have saved those the last time I downloaded them.
b0bert said:
Thank you for your response, but man I really cannot find those drivers anywhere.
I know there are two different drivers I need to have the PC driver and the USB driver... but the only thing I can find *at all* is the Motorola Device Manager. I knew I should have saved those the last time I downloaded them.
Click to expand...
Click to collapse
If the drivers are not automatically being installed, then yes, download Motorola Device Manager for the drivers
palmbeach05 said:
If the drivers are not automatically being installed, then yes, download Motorola Device Manager for the drivers
Click to expand...
Click to collapse
Sure but the motorola device manager only works if you phone its working, cuz when you open the MDM it`ll only look for updates and the shut down... sooo.... any other way?
I was in the same quandary and installing the Motorola Device Manager - is THE only known way to get the drivers for Motorola devices. It should auto detect your phone as Atrix and go ahead. However, I don't think you're going past the bootloader, so not much luck there.
You said, you could still access recovery? Why don't you try the fruitcake stock ATT GB ROM then (from recovery)?
I have spent a week sifting this forum and was unsuccessful in answering my own question. Please guide me as I am a NOOB to Android. Or straight up tell me I gotta send this in to Sony.
I bought this Xperia Tablet 2 in May. LOVE it! Made no Root mods, totally stock. Updated to 4.1.1 - OK! Updated to 4.1.1 release2 - issues.
Within a week, the tablet would shut off in the middle of Paper Monster and web browsing. I would restart and everything was fine, for a while. Then it shut down and would not boot back up. Sticks on SONY.
Tried soft reset, no luck. Tried Recovery (very hard to get into, fails 80% of the time to enter) no luck, still sticks on SONY.
So I don't have access to put the USB Debugging feature on, and its not rooted so 6.5 All-in-One can't help me (at least not in my current NOOB status)
I did purchase a brand new SGPT122 to replace this one, but have not set it up in hopes maybe someone could tell me how to copy the OS or RECOVERY off of it and install it on my SGPT121 to revive it.
Whats my next step?
SirStorm said:
I have spent a week sifting this forum and was unsuccessful in answering my own question. Please guide me as I am a NOOB to Android. Or straight up tell me I gotta send this in to Sony.
I bought this Xperia Tablet 2 in May. LOVE it! Made no Root mods, totally stock. Updated to 4.1.1 - OK! Updated to 4.1.1 release2 - issues.
Within a week, the tablet would shut off in the middle of Paper Monster and web browsing. I would restart and everything was fine, for a while. Then it shut down and would not boot back up. Sticks on SONY.
Tried soft reset, no luck. Tried Recovery (very hard to get into, fails 80% of the time to enter) no luck, still sticks on SONY.
So I don't have access to put the USB Debugging feature on, and its not rooted so 6.5 All-in-One can't help me (at least not in my current NOOB status)
I did purchase a brand new SGPT122 to replace this one, but have not set it up in hopes maybe someone could tell me how to copy the OS or RECOVERY off of it and install it on my SGPT121 to revive it.
Whats my next step?
Click to expand...
Click to collapse
Option 1 send to Sony tell them issues and ask for downgrade in firmware. They will probably say it is not possible.
Option 2 root and use AiO tool to install rescure back-door then you can install JB r1. You can then unroot and have it as stock.
stifilz said:
Option 1 send to Sony tell them issues and ask for downgrade in firmware. They will probably say it is not possible.
Option 2 root and use AiO tool to install rescure back-door then you can install JB r1. You can then unroot and have it as stock.
Click to expand...
Click to collapse
OK I have been attempting this all evening. I cannot get my computer to recognize the tablet. That is because I cannot enable USB Debugging because I cannot get past the SONY screen, right? Or is there another way to root?
It appears I can only access the Recovery Screen, and it does not like the version of OTA.zip I have. I have not found Recovery ROMS for this tablet.
I really appreciate your time, Thank You.
SirStorm said:
OK I have been attempting this all evening. I cannot get my computer to recognize the tablet. That is because I cannot enable USB Debugging because I cannot get past the SONY screen, right? Or is there another way to root?
It appears I can only access the Recovery Screen, and it does not like the version of OTA.zip I have. I have not found Recovery ROMS for this tablet.
I really appreciate your time, Thank You.
Click to expand...
Click to collapse
Adb should still be available in recovery wether usb debugging is on or not. Is it asking for a driver at all?
If you had the latest update installed then. You wont be able to install anything and it will need to go to sony.
SirStorm said:
It appears I can only access the Recovery Screen, and it does not like the version of OTA.zip I have. I have not found Recovery ROMS for this tablet.
I really appreciate your time, Thank You.
Click to expand...
Click to collapse
Check your device manager to see if the tablet driver is properly installed, if not, install it. This might help.
Sent from my GT-I9505 using xda app-developers app
Thanks for the help! I called Sony today, they said since the computer doesn't recognize the device and it will only go into recovery sometimes the pad needs service. (I know OF COURSE) But is does stand to reason since I have plugged into multiple PCs and no recognition. They are sending a box for me. I just hope my 32Gb version doesn't tank also.
Could someone give me a super quick guide on how to get this on my phone? I coming from years of Samsung phones and never owned a Sony before or know anything about it. I have CM on all my Samsung devices for years and simply want a CM ROM in the Z and get it done with with. I picked up a 99% like new second-hand Ultra Z LTE C6833 today, has stock 5.02 and I don't have a clue how to get this flashed in the easiest and simplest way possible. As for locked or not bootloader, I also don't have a clue. First step which is to install TWRP I immediately got stuck because the links posted are dead (teamw.in/project/twrp2/219)
Without wanting to waste anyone's time, if someone could give me the simplest and most painless info on how to get the Z flashed, I'd be super appreciative. The threads on this phone are in the hundreds at this point and I read all sorts of very confusing and contradictory info. I worry to kill or brick it immediately before I even get started.
Thanks much in advance
Read. Thats my tip.
Every sony device past 2011 works the same way.
Look at different xperia forums, for example at the Z1 section, Z2, Z3 etc.
Look at the rooting guides. Unlock guides. Ta backup guide. Just read and read.
Dont just look at the first guide and jump right in.. read first.
Explore the Xda forum. You will find the guides im talking about. im on my phone.. a bit difficult to post links atm
Much good information can be found here
http://forum.xda-developers.com/crossdevice-dev/sony
You can check if the bootloader is unlocked or locked by opening the dialer and entering *#*#7378423#*#*. Then tap "Service Info" and then "Configuration". It'll either say "Bootloader unlocked: Yes", or "Bootloader unlock allowed: Yes/No". If it says NO on the latter, then you can't unlock the bootloader and you're pretty much screwed. Bell Canada devices have locked bootloaders, and I believe it's the same with UK O2. Chances are that you can unlock it, but you could of course be really unlucky.
If you can unlock the bootloader, then your Ultra will pretty much behave like a Nexus device when it comes to rooting and stuff like that. Just flash a custom kernel with recovery, like NUT's Dual Recovery (with CWM and TWRP), then flash SuperSU, and you'll have recovery and root. Next step is to flash CM12.1 and you're done. It's very easy once you have recovery.
Klaos3000 said:
You can check if the bootloader is unlocked or locked by opening the dialer and entering *#*#7378423#*#*. Then tap "Service Info" and then "Configuration". It'll either say "Bootloader unlocked: Yes", or "Bootloader unlock allowed: Yes/No". If it says NO on the latter, then you can't unlock the bootloader and you're pretty much screwed. Bell Canada devices have locked bootloaders, and I believe it's the same with UK O2. Chances are that you can unlock it, but you could of course be really unlucky.
If you can unlock the bootloader, then your Ultra will pretty much behave like a Nexus device when it comes to rooting and stuff like that. Just flash a custom kernel with recovery, like NUT's Dual Recovery (with CWM and TWRP), then flash SuperSU, and you'll have recovery and root. Next step is to flash CM12.1 and you're done. It's very easy once you have recovery.
Click to expand...
Click to collapse
Thanks MUCH for the detailed info!
I checked the bootloader info as you said and it's not unlocked, but can be done. It seems a daunting task but let me start by trying to get it done. Hopefully I won't screw-up the phone. I'm searching how to do it as there seem to be several ways.. After I complete the unlocking (let's hope) I'll report back and try jump on the next steps. Probably will have some follow-up doubts or questions.. this is all a very different and more complex process than the Samsung devices I've owned that never required any of this crazy gymnastics..
Anyway, thanks again very much and keep you posted!
VeEuzUKY said:
Thanks MUCH for the detailed info!
I checked the bootloader info as you said and it's not unlocked, but can be done. It seems a daunting task but let me start by trying to get it done. Hopefully I won't screw-up the phone. I'm searching how to do it as there seem to be several ways.. After I complete the unlocking (let's hope) I'll report back and try jump on the next steps. Probably will have some follow-up doubts or questions.. this is all a very different and more complex process than the Samsung devices I've owned that never required any of this crazy gymnastics..
Anyway, thanks again very much and keep you posted!
Click to expand...
Click to collapse
I'll give you the short guide:
- Go to this (offical Sony) site and give them your IMEI and whatnot
- Wait a couple of minutes, and you'll receive a key
- Now, there are two ways to unlock the bootloader - both equally official, but the easiest one is to use Flashtool.
- Hit the "BLU" button and enter the key you got fra Sony. You only have to do this once.
- Once this is done, you can start flashing a kernel with recovery and flash whatever you'd like.
I'll help you along the way if you need to, so don't be afraid to ask any questions. Start by unlocking the bootloader, and I'll be here if you need any help.
Klaos3000 said:
I'll give you the short guide:
- Go to this (offical Sony) site and give them your IMEI and whatnot
- Wait a couple of minutes, and you'll receive a key
- Now, there are two ways to unlock the bootloader - both equally official, but the easiest one is to use Flashtool.
- Hit the "BLU" button and enter the key you got fra Sony. You only have to do this once.
- Once this is done, you can start flashing a kernel with recovery and flash whatever you'd like.
I'll help you along the way if you need to, so don't be afraid to ask any questions. Start by unlocking the bootloader, and I'll be here if you need any help.
Click to expand...
Click to collapse
Hello I am new to Sony too and I have a question. If I unlock the bootloader root flash custom roms and then decide to get back to stock and lock the bootloader will my warranty be voided?
Sent from my C6833 using Tapatalk
mike13ftw said:
Hello I am new to Sony too and I have a question. If I unlock the bootloader root flash custom roms and then decide to get back to stock and lock the bootloader will my warranty be voided?
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Yes, and that's why it's a good idea to backup your TA folder, which contains the DRM keys. Once you unlock the bootloader, these keys disappears, and that's why it's a good idea to make a backup of them. There are a couple of tools that does this for you, and you can find them in the cross-development section.
Klaos3000 said:
I'll give you the short guide:
- Go to this (offical Sony) site and give them your IMEI and whatnot
- Wait a couple of minutes, and you'll receive a key
- Now, there are two ways to unlock the bootloader - both equally official, but the easiest one is to use Flashtool.
- Hit the "BLU" button and enter the key you got fra Sony. You only have to do this once.
- Once this is done, you can start flashing a kernel with recovery and flash whatever you'd like.
I'll help you along the way if you need to, so don't be afraid to ask any questions. Start by unlocking the bootloader, and I'll be here if you need any help.
Click to expand...
Click to collapse
Thank you very much!
Well so far EVERYTHING HAS BEEN A TOTAL NIGHTMARE! Nothing I try to do works!
First I installed flashtool, latest version. Im running Windows 7 64bit. It was a nightmare to get flashtool downloaded and installed. After I finally got it installed, ot took another hour updating itself and syncing stuff. When it finally finished and while holding down the Volume Down key I connected the phone to the PC via USB cable, Immediately I get an error of device driver errors. flashtool gives me also several errors. Then I tried to install the Flashtool-drivers-1.1-20130911. Then another problem, the drivers dont install at all with a message "DPinst.exe cannot execute on your operating system". That's it, finished! When I go to the Windows Device Manager, all I see is an exclamation mark under S1 Service.
So then I tried the FastBoot method. Also no luck. While holding down the Volume Up key I connected the phone to the PC via USB cable, the phone's blue light turns on, and again I get a DRIVER NOT INSTALLED ERROR. My computer refuses to recognize the phone and the device driver is never installed . The Windows Device Manager shows an exclamation mark under S1Boot FastBoot.
Then I tried the Sony way and installed the Android SDK!!!!! Immediately I find I need to download more crap, thie time the JRE Development Kit! Takes me 3 hours do download this with my useless internet connection. At this point I am already ready to throw my laptop out the window and break the stupid phone in a million pieces!
But then, there is the next problem. After all downloaded and installed, before I can even started I get stuck again, because Im supposed to go to the android SDK folder c:\android-sdk\extras\google\usb_driver and replace/install the fastboot drivers “android_winusb.inf”.. well, I dont have an extras or google or usb_driver folder on my SDK installed folder! NOTHING! THIS IS ALL RIDICULOUS!
Finally I searched everywhere on the internet for other possible Ultra Z drivers. I ft to Sony's own site and found Xperia Z Ultra (C6833, C6806, and C6843) drivers, Xperia Z Ultra (XL39h) drivers, Xperia Z Ultra (SOL24) drivers, Xperia Z Ultra (SGP412) drivers and others.. this is all crazy what a nightmare of mess and miss-information everywhere about this phone! Anyway, I tried all of them. None works.
I am so frustrated and desperate. My God! Cant get anything done. Nothing.................................. I cant believe this..
UPDATE: I give-up. Ive spent the whole day and downloaded and installed GIGS of apps and software and drivers. Nothing communicates with this useless phone. Im done.
Could anyone give me advice if its there is an alternate way to, root install a recover and flash this piece of **** phone without unlocking the bootloader which basically I cant do? If not, it will fly out the window asap, I cant deal with this ridiculous drama. Years of handling and flashing all sorts of hardware COMBINED, never gave me 1/10th of the misery and headaches this hardware has given me in one day. Xperia, never again..
By the way, Sony's "AMAZING" PC Companion app is so great and fantastic that it doesn't even have an uninstaller! No joke! Once in the computer, crawling endless directories with all sorts of files, drivers and registry entries, it will NEVER come out again. All is amazing..
You did the opposite of what I advised you to do. You did not read correct guides.
Q:Ask yourself what do you want to achieve?
You wrote in your first post "if someone could give me the simplest and most painless info on how to get the Z flashed".
Q:My counterquestion is why? Is your phones software unstable? Are you curious to learn to modify the devices software?
A:If your device is unstable. Please do a factory reset.
Q:Are you curious to learn how to modify the software?
A:Then collect information. Read. Set a timer for how long you will spend learning. Let say 45 minutes.
When 45 minutes has passed. STOP.
Take a break. Do something else and continue the next day. Repeat until you are confident to try a simple operation
For example: learn how to use adb and fastboot. Learn the commands. What they do.
I can not stretch enough how important it is to read and learn before you jump into things.
I do not see why I or anyone here should help you to unlock your bootloader. Because you do not have a clear purpose or knowledge how to do this.
VeEuzUKY said:
UPDATE: I give-up. Ive spent the whole day and downloaded and installed GIGS of apps and software and drivers. Nothing communicates with this useless phone. Im done.
Could anyone give me advice if its there is an alternate way to, root install a recover and flash this piece of **** phone without unlocking the bootloader which basically I cant do? If not, it will fly out the window asap, I cant deal with this ridiculous drama. Years of handling and flashing all sorts of hardware COMBINED, never gave me 1/10th of the misery and headaches this hardware has given me in one day. Xperia, never again..
By the way, Sony's "AMAZING" PC Companion app is so great and fantastic that it doesn't even have an uninstaller! No joke! Once in the computer, crawling endless directories with all sorts of files, drivers and registry entries, it will NEVER come out again. All is amazing..
Click to expand...
Click to collapse
That what I did for the drivers and work just fine .Try it
Edit: forgot to post link http://forum.xda-developers.com/showthread.php?t=2095087
Sent from my Xperia Z Ultra using Tapatalk
SÜPERUSER said:
You did the opposite of what I advised you to do. You did not read correct guides.
Q:Ask yourself what do you want to achieve?
You wrote in your first post "if someone could give me the simplest and most painless info on how to get the Z flashed".
Q:My counterquestion is why? Is your phones software unstable? Are you curious to learn to modify the devices software?
A:If your device is unstable. Please do a factory reset.
Q:Are you curious to learn how to modify the software?
A:Then collect information. Read. Set a timer for how long you will spend learning. Let say 45 minutes.
When 45 minutes has passed. STOP.
Take a break. Do something else and continue the next day. Repeat until you are confident to try a simple operation
For example: learn how to use adb and fastboot. Learn the commands. What they do.
I can not stretch enough how important it is to read and learn before you jump into things.
I do not see why I or anyone here should help you to unlock your bootloader. Because you do not have a clear purpose or knowledge how to do this.
Click to expand...
Click to collapse
Just to briefly correct you: I'm the type of guy that has NEVER gotten a virus on a computer. I'm the type of guy that has rooted, flashed and played around with phones for many years with more or less degree of difficulties, but always successful. I'm the type of guy that has helped many many people in this community with their hardware, when I know how. I'm the type of guy that has knows many things about the works of Samsung devices that I have used for many years and have never had an issue learning what's needed. I am the type of guy always ready to offer friendly advice when someone is in need of something I may offer help with. Finally, I am the kind of guy that has a Dell laptop, running Windows 7 64bit, that by whatever reason refuses to install the proper drivers for the Ultra Z, or the kind of guy that maybe has a flawed Ultra Z. After all, it's a second hand unit and about 2 years old, despite that it looks new.
So, the only thing this type of guy can do, is 1) try a different computer to see if the communications with the phone work, and if not, check the phone because obviously that's where the only place the problem can come from. To try different USB cables and do phone resets, that I did today several times. I learned those basics the first day of my flashing life, long long ago.
There is NOTHING to read or learn or do, when there is no communication between the phone and the computer that connects to it. You seem not to understand the very basics of the problem here is not lack of reading, instead is only lack data flow between devices.
Anyway, thanks for the constructive advice!
2 extra things: all the tools, apps and drivers you have suggested, I have them all. All the procedures, steps, folders where stuff is and goes.. I've done all. I learn very quickly. The issue is none of that.. the issue is, no driver for this phone will install on my laptop, for whatever reason. Is that simple.
And then there is another issue.. for you, and most people on XDA, downloading and getting "stuff" is a breeze. But not me. Where I am, XDA is blocked, and even with a VPN, hardly works. To reply to you or just log-in, sometimes is an hour. And most file hosts? Mega? Rapidgator.net? Zippy share?.. a few hundred others? Well.. they doesn't work. Uploaded.net.. Mediafire.. Google Drive.. AndroidFile Host, and just about everything else, all DON'T WORK. All blocked. So are blocked most of the VPNs now. So, while for you, go here, get this, download that, is all a piece of cake, for me, is not. Most things to get download are truly a nightmare. And when it comes to download a ROM or any 2 or 3 hundred Mg files, sometimes takes me days of endless wait and interrupted downloads. I live in a crazy country called China, where all Google stuff, Android included, is forbidden, and all around it.. XDA included.
So, talk is easy. But when access to simple and basic information is so difficult to get and everything comes at a premium, life is really a bit more complicated than maybe you can imagine. So...... yeah, help is very much appreciated indeed, in the same way I am always willing to help others when I can, without calling out their lack or reading or question their abilities to follow my advice
Alright, that was quite painful to read, not because of something wrong you wrote, but because I've been there too. I don't know what device you had prior to the Ultra, but just forget what you learned from that device.
Just sit down, relax and figure out what you're trying to do, and then how to maybe achieve it. Yes, I do understand that your laptop doesn't cooperate at all, but that's just technology. Of course it won't work when it should. We've all been there.
1. Set up your computer to be able to communicate with your Ultra. Installing the SDK is overkill since the only thing from the SDK you need is Fastboot and ADB drivers. You can easily install those two by installing this tiny tool that does it for you.
Fastboot and ADB is now installed.
2. Install Flashtool. You've already done this. Connect your Ultra and open Flashtool. Flashtool should grab and set things up for the Z Ultra automatically. This should only take 5-30 seconds. Not three hours. The device should still be powered on at this stage.
3. Okay, now you have Flashtool installed, and it recognizes your Ultra. Next step is to go to that Sony site I linked to, to get the unlock key. Fill in the required info, and you'll get the key sent on your email. Don't misplace it.
4. Go back to Flashtool, hit the "BLU" button, paste the key in, and that's it. Don't set the device into fastboot or flashmode until Flashmode asks you to do it. Fastboot can be active and connected forever, but Flashmode will disconnect by itself after a minute or so.
5. Your bootloader is now unlocked. This means that you're free to do whatever you'd like to do with it. Xperia devices do not come with a default recovery system, so we'll have to flash a custom kernel that includes a recovery. You can find them in the dev section. Once you've flashed or hotbooted a custom kernel with CWM or TWRP, you're free to root by flashing SuperSU, and flash whatever ROM you'd like to flash.
It's very easy to deal with Xperia devices once you have things set up (mainly Flashtool), and the basic steps are:
- Unlock bootloader (one time thing)
- Flash custom kernel
- Done
It's the same procedure as Nexus devices, only that we have to use special tools to unlock our bootloaders, while Nexus' use one command in a terminal. The issue here though is the tools, and not the process, and I feel your pain. I really do. It would've been so much easier if I could just show up at your door, do it for you, and leave
---------- Post added at 06:46 PM ---------- Previous post was at 06:43 PM ----------
VeEuzUKY said:
And then there is another issue.. for you, and most people on XDA, downloading and getting "stuff" is a breeze. But not me. Where I am, XDA is blocked, and even with a VPN, hardly works.
Click to expand...
Click to collapse
Then let's make it easier? My upload speeds aren't an issue, so please point to a site that I can upload the tools too, which you then can download from at proper speeds
Klaos3000 said:
Alright, that was quite painful to read, not because of something wrong you wrote, but because I've been there too. I don't know what device you had prior to the Ultra, but just forget what you learned from that device.
Just sit down, relax and figure out what you're trying to do, and then how to maybe achieve it. Yes, I do understand that your laptop doesn't cooperate at all, but that's just technology. Of course it won't work when it should. We've all been there.
1. Set up your computer to be able to communicate with your Ultra. Installing the SDK is overkill since the only thing from the SDK you need is Fastboot and ADB drivers. You can easily install those two by installing this tiny tool that does it for you.
Fastboot and ADB is now installed.
2. Install Flashtool. You've already done this. Connect your Ultra and open Flashtool. Flashtool should grab and set things up for the Z Ultra automatically. This should only take 5-30 seconds. Not three hours. The device should still be powered on at this stage.
3. Okay, now you have Flashtool installed, and it recognizes your Ultra. Next step is to go to that Sony site I linked to, to get the unlock key. Fill in the required info, and you'll get the key sent on your email. Don't misplace it.
4. Go back to Flashtool, hit the "BLU" button, paste the key in, and that's it. Don't set the device into fastboot or flashmode until Flashmode asks you to do it. Fastboot can be active and connected forever, but Flashmode will disconnect by itself after a minute or so.
5. Your bootloader is now unlocked. This means that you're free to do whatever you'd like to do with it. Xperia devices do not come with a default recovery system, so we'll have to flash a custom kernel that includes a recovery. You can find them in the dev section. Once you've flashed or hotbooted a custom kernel with CWM or TWRP, you're free to root by flashing SuperSU, and flash whatever ROM you'd like to flash.
It's very easy to deal with Xperia devices once you have things set up (mainly Flashtool), and the basic steps are:
- Unlock bootloader (one time thing)
- Flash custom kernel
- Done
It's the same procedure as Nexus devices, only that we have to use special tools to unlock our bootloaders, while Nexus' use one command in a terminal. The issue here though is the tools, and not the process, and I feel your pain. I really do. It would've been so much easier if I could just show up at your door, do it for you, and leave
Click to expand...
Click to collapse
Klaos3000, you are great. Difficult to find words to thank you the time you take to try help me out. Really much appreciated. It's almost 1AM my local time here and tomorrow I will give a try to all you suggest me step by step. If I run into additional difficulties, I will try use another computer. Maybe is my specific laptop with my windows installation that is being stupid with the Ultra Z hardware. I have installed endless drivers for HTC, LG and mainly Samsung phones and tabs, and have never had any difficulty.. just last week I installed drivers for a friend's new Galaxy Tab S2, got a recovery in, got it rooted and manually cleaned of a lot of useless samsung system bloat stock apps and crap, all about 20 minutes. Hard to understand why with an Xperia phone, things are so complicated. Anyway, tomorrow will follow your advice and report back.
Again, thanks a lot for your help
Klaos3000, despite being so late, I decided to give this another try and follow your steps.
But I Immediately run into similar problems.. I CANNOT get drivers installed.
1. I have downloaded and installed Minimal ADB and Fastboot as you suggested.
2. I have flashtool-0.9.19.7 installed and did the 0.9.19.8 upgrade by updating the x10flasher.jar file.
3. Now you suggest I connect my phone and open Flashtool. But connect my phone how? Boot it up? USB debugging on or off? Or you mean connect the phone turned off and then on press Volume up? Or press Volume down?
I tried all this, and again I get a device driver error. Because there are NO DRIVERS installed for the phone. This is same problem as before. And if I go to the drivers folder inside Flashtool and try install the drives, I immediately get an error that they cant be installed in my operating system.
I am completely stuck as before in this very simple step.
Attached screnshots when I enter Flashmode:
And this is what happens when I try install drivers from C:\Flashtool\drivers:
And if I try go to FastBoot Mode with the phone's blue light on (Volume up + connect USB Cable) this is what I get:
UPDATE:
I have finally unlocked the bootloader, using the Fastboot method! I still could not get the Flashtool drivers to recognize my phone, but the FastBoot ADB drivers installed without a problem. 2 things Ive learned with this experience I want share with anyone in the future that has similar difficulties:
1) I switched to a friend's old laptop with Windows XP. Under XP, FastBoot ADB drivers installed at the first time and absolutely zero problems.
2) I used a USB 2.0 port! If connected to a USB 3.0 port, another cascade of new problems immediately arise.
So that's it. I want thank VERY MUCH everyone in this thread that was so kind to try and help me as much as possible. I would not have gotten this done with it
My next step is to install a recovery from:
http://forum.xda-developers.com/showthread.php?t=2261606
But I only see downloadable versions for looked bootloaders. Also, I want to flash a custom CM based ROM next and see a warning regarding Unlocked Bootloader with CyanogenMod, AOSP and OmniRom that the kernel needs be repack to replace the built in recovery with XZDualRecovery or things will either not work at all or require unexpected operating instructions. So again, I am extremely confused as what files to choose and what to do and worry to look for the wrong thing and worry to make a catastrophic mistake. And also I have no idea what method I should use:
- ZU-lockeddualrecovery2.8.21-RELEASE.flashable
- ZU-lockeddualrecovery2.8.21-RELEASE.installer
Thanks again for the advice and the feedback in all this
I'm stuck on waiting for all devices in adb.. My phone screen has a menu with three choices, one of them is flash unlock.bin. Should I keep waiting for all devices for how long in adb?
What procedure are you using to unlock? The WTF process is the one that I believe has worked the best for most people... and that doesn't have anything special on the phone screen, so I'm thinking you're using some app or script?
dsk1000 said:
I'm stuck on waiting for all devices in adb.. My phone screen has a menu with three choices, one of them is flash unlock.bin. Should I keep waiting for all devices for how long in adb?
Click to expand...
Click to collapse
Yea, I'm following that one. I read somewhere about AMD PCs causing problems. My phone shows when I use adb devices. So should I be a little more patient or what?
No, the processes are quick. AMD Ryzens typically have issues, but it's only because of the USB driver they use. I've heard a few Intels have issues sometimes as well.
The key is, you just need to try other computers... this is the "hardest" thing to do, but it's really the only solution to that issue. The process takes under a second, so it's not a patience issue.
For the record, my older laptop with an AMD A9 CPU did the process fine... so, again, it's not a CPU issue, but a driver issue for the USB, apparently...
schwinn8 said:
No, the processes are quick. AMD Ryzens typically have issues, but it's only because of the USB driver they use. I've heard a few Intels have issues sometimes as well.
The key is, you just need to try other computers... this is the "hardest" thing to do, but it's really the only solution to that issue. The process takes under a second, so it's not a patience issue.
For the record, my older laptop with an AMD A9 CPU did the process fine... so, again, it's not a CPU issue, but a driver issue for the USB, apparently...
Click to expand...
Click to collapse
Thanks for the reply..I'm super new to adb..but I am following wtf instructions. I will keep researching..and asking questions. Thanks. PS I haven't rooted anything since my lg g3..
dsk1000 said:
Thanks for the reply..I'm super new to adb..but I am following wtf instructions. I will keep researching..and asking questions. Thanks. PS I haven't rooted anything since my lg g3..
Click to expand...
Click to collapse
Some people had to use 2 or 3 computers. An older one with Intel CPU works best (especially if it has USB 2.0), but yes an AMD can work. As noted by @schwinn8 Ryzens are no go. One guy was upset because he had superfast gaming computer and we kept telling him to try another computer. He borrowed his brother's mediocre laptop and BOOM, worked. Another guy dug some old laptop out of his closet and it worked.
Thanks for the reply...i was just reading about adb making sure it wasn't something i was doing wrong. Even tried on an old iMac that i had installed linux on. "Waiting for device..." So..still reading and learning to be patient. Thank you
dsk1000 said:
Thanks for the reply...i was just reading about adb making sure it wasn't something i was doing wrong. Even tried on an old iMac that i had installed linux on. "Waiting for device..." So..still reading and learning to be patient. Thank you
Click to expand...
Click to collapse
Also, try the steps mentioned in Wtf troubleshooting section.
Other than that you may have to mess around in the device manager section to see if the phone is detected properly or not.
(if there's a problem with the driver the device will show up as unknown android device or something)
dsk1000 said:
Thanks for the reply...i was just reading about adb making sure it wasn't something i was doing wrong. Even tried on an old iMac that i had installed linux on. "Waiting for device..." So..still reading and learning to be patient. Thank you
Click to expand...
Click to collapse
You said "patient"... just to reiterate, this process doesn't take longer on a computer that says "waiting for device". It's a fast process, so if it's not happening within a few seconds, it won't work on that setup, period. Don't waste your time waiting - get another machine/cable/etc (check the troubleshooting steps to find other possible issues... the computer is usually the biggest problem to overcome, but the most successful).
Good news, i unlocked my phone and installed twrp, then i had to stop the process (wtf)
i still need to make a backup in TWRP and flash two more files from wtf notes. I cannot seem to be able to reboot into TWRP from ADB. thanks in advance
The oem is greyed out in developer mode and says its unlocked. Idk?
Glad to hear you got it unlocked.
In the WTF post it says that the developer mode may remain grayed out after being flipped... this is normal. It comes back after some time. Of course, you don't want to toggle it again anyway, since you're unlocked...
When i go to use an app to boot into twrp..it tells me its not rooted.
dsk1000 said:
When i go to use an app to boot into twrp..it tells me its not rooted.
Click to expand...
Click to collapse
Used getvar..unlocked.
Well its done..used an old hp A6 with linuxmint. I found linux to be straightforward and easy when trying to root my phone. No jumping thru hoops and juggling stuff.
Any recommendations for remodeling the phone? Boot to twrp..roms..ect?
dsk1000 said:
When i go to use an app to boot into twrp..it tells me its not rooted.
Click to expand...
Click to collapse
Bootloader unlocked is not rooted. It's just the prerequisite to being rooted. Then you install TWRP custom recovery and then use that to flash Magisk. It's all in the WTF Instructions. Also be sure to use the version of Magisk in the WTF Instructions, at least initially.
Thanks..ive got magisk from the instructions. It wants to update..should?
Once you are booted into Android, you can update Magisk to some degree. I forget the last version I had but I recall I could go to 20.x or something without issue. But there is always a risk of having issues if you update to the latest version... so be prepared to go back to the one on the WTF thread if the phone has issues. In other words, don't do this last minute or without a PC to work from... because it could fail.
The only time you have to use the old Magisk is during that first boot with it... once you're booted through, you have been able to update to newer versions. But unless you need some specific feature of the newest version, I might suggest leaving it alone...
I read somewhere..when i upgrade on US 998 20b, i need to move up to 20c?
Also, do i use the "twrp version. 20c"?