Is anyone else having this problem, sometimes when pressing on a storage card installed app's icon to load it, it is endlessly loading and after 2-3mins you get a windows unable to run message.
If yes, is there a solution for that, except installing everything in phone memory ?
Which App do you mean exactly, or are these everybody of the SD card?
Any app randomly at some point it will crash like this and when the msg comes if you try again the app loads normaly. I read somewhere about this problem but can't find it again...
Jonous said:
Any app randomly at some point it will crash like this and when the msg comes if you try again the app loads normaly. I read somewhere about this problem but can't find it again...
Click to expand...
Click to collapse
sorry, have unfortunately no idea for this problem
good luck
Thanx anyway for your interest, appreciate it
try a different memory card/rom ... try a different memory card if u have one at hand , or a rom if u dont have one at hand , u will then know whats causing it
Same here, everything appears to be fine then out of the blue you tap start and tap on any application that is on the SD card and I just get the wait cursor forever and there is nothing you can do but reset.
Whats strange is this happened last night and I pressed reset but it did not reset (maybe just pressed lightly) then it bleeped and said the application could not be found.
I just thought it was me
Me too, on supplied SD card.
I suspect the SD card falls asleep and isn't instantly accessible so leads to this error which causes the 2 or 3 minute hang. I've recently been ensuring I access the SD with a file manager program to wake it up before launching the app I want. I haven't had the error yet when using this pattern.
I might write a launcher program that wakes up the SD card prior to launching the intended app if it continues to look like a sleeping SD card is the cause of the problem.
I first thought it was a problem with .NET programs on the SD card as it's my self-written programs that I use most on the SD card. This is still a possible (but now lesser) suspect for me
Everyone has this problem ... and if you don't ... yer fricken lucky ehhehehe.
Take a look all over the TG01 forums. This problem along with other SD card related problems exist everywhere you go. Now I have owned both the TG01 and the T01a. I don't recall this problem existing on the T01a from DOCOMO. Unfortunately, I couldn't sim unlock the T01a, so I sold it for an unlocked TG01.
My friend, if you could write a launcher to "wake up" the SD card, that would be VERY much appreciated by literally everyone on this forum.
Thank you.... very much in advance,
-Kili.
PS: Something nifty. I have installed everything that runs as a service or consistently in memory on my main memory, and I even use all wallpapers from main memory and make sure that all cashing takes place on the main memory. It hasn't frozen for a few hours now. Even coming out of sleep mode, everything is A-OK.
Kilihari said:
PS: Something nifty. I have installed everything that runs as a service or consistently in memory on my main memory, and I even use all wallpapers from main memory and make sure that all cashing takes place on the main memory. It hasn't frozen for a few hours now. Even coming out of sleep mode, everything is A-OK.
Click to expand...
Click to collapse
Yeah thought of doing that but never did cause i soft reset quite often and i want my stuff in storage so i don't lose them.. With the 6.1 rom I don't get this very often, in fact an app stack yesterday after almost two weeks that i'm using this rom. I'm thinking maybe it was also because in 6.5.x roms i used changed icons for apps that were all in storage also, whereas in 6.1 i didn't find any way to change icons, so i'm using the stock ones. Anyway i'm happy at least i don't get it often.
Holy crap! It really really worked.
Well.... holy crap! I loaded up Resco Explorer, open up my SD Card, "Woke it up" so to speak. Then I can use the programs on my SD Card without fear. I think there is a definite work around here, we need someone to come up with a "SD Wake-up" program for the TG01, I would do it myself but I would probably brick everyone's devices in the process ehehehehheehhe(I don't know how to program)! Thank-you so much LesForges. You da man for coming up with the easy-yet-impossible-for-kili-to-find workaround/solution.
I haven't had this problem occur in one day now. My phone has been rock solid... it is a miracle! Honestly .. I feel a certain peace inside.
Guys seriously we need to get the word out about this solution. We can use this and probably overcome this horrible annoying error with a simple application!
-Kili
Kilihari said:
I feel a certain peace inside.
Click to expand...
Click to collapse
I'm feeling you
Allright... I can't program, BUT I CAN DAMN SURE MIX N' MASH... ohh yeah
All-right, what is the one problem that plagues all of our devices? THE "SD CARD" sleep mode/app loading problem/freezing for no reason/and generic crappiness of the Toshiba SD CARD drivers.
And for you lucky few that haven't got a clue what I am talking about ... this goes out to you... "SKREW YOU EHHEEHEH mahthafa'&Az, I HATE YOU.... ya lucky basterd skum" (Just kidding of course) eheheheh
Needless to say, some people this doesn't seem to effect, others, this is a nightmare, so much so, I have contemplated selling my beautiful device before finding this. The Windows Mobile 6.1 rom solved so many problems for me, but still this one SD Freeze after Sleep mode problem persisted... This is how I overcame the issue.
First of all... what is the problem... the problem is easily duplicated if you go into sleep mode, wait a couple of minutes, then your sd card goes to sleep, then turn the device back on and run a program or application that is installed on the sd card. Your device will freeze and if it didn't freeze this time, try it a few more times... it will freeze. To overcome this issue, as stated above, go into Resco Explorer and open up the SD Card and then your SD Card has been "woken up" so to speak and then everything is good again. But how does one automate the process? You must do this.
Install S2U2 - Swipe to Unlock 2, after configuring it, go into the "STU2 Settings", then go to "Others" in the options area, then point it to Resco Explorer. Now the nifty thing about Resco Explorer is that you have the option have it default to open in any directory that you desire. So of course, set it to "\Storage Card" ... that's all. So basically whenever your device goes to sleep, it will automatically open up the SD Card once you want to use your device again, so it will never catch you off-guard again. The problem is solved. Now.. for the next item, I really want to just close Resco Explorer as soon as I open it, can one make an executable batch file in Windows Mobile? Then all our problems are truly solved. I notice that I have to hover in the SD Card area for about 3 seconds for the icons in the root directory to populate. I assume you need to have Resco Explorer kinda on a timed delay.. So you use Swipe to Unlock 2 and then it should open up Resco for about 3 seconds and then quit. I don't want to minimize Resco, I really want to quit it so if the device goes into sleep mode again, then it is already set for next time. I notice the icons are cashed in memory wen I leave the program open, so I always have to go up and down a couple of directories in order to "Wake Up" the card.
If someone knows how to make some kind of script that would open up my Resco for a couple of seconds and then close it, man that would sure be appreciated. Thank you.
-Kili.
Class 10 Kingston
So... I just got my 16Gb Class 10 Kingston in the mail... I will let everyone know if it also solves this problem. I assume it will not fix the problem but hey if I can get a little more speed out of my device then I am happy. I will post my results later.
**UPDATE** [21:59 - 2010/06/17] - Tokyo Time
Tried my Kingston 16 Gb Class 10, but to no avail, problem still persists. So just stick with the above solution.
-Kilihari
Kilihari said:
Tried my Kingston 16 Gb Class 10, but to no avail, problem still persists. So just stick with the above solution.
-Kilihari
Click to expand...
Click to collapse
So much for the sd brand assumption.
Kilihari said:
All-right, what is the one problem that plagues all of our devices? THE "SD CARD" sleep mode/app loading problem/freezing for no reason/and generic crappiness of the Toshiba SD CARD drivers.
And for you lucky few that haven't got a clue what I am talking about ... this goes out to you... "SKREW YOU EHHEEHEH mahthafa'&Az, I HATE YOU.... ya lucky basterd skum" (Just kidding of course) eheheheh
Needless to say, some people this doesn't seem to effect, others, this is a nightmare, so much so, I have contemplated selling my beautiful device before finding this. The Windows Mobile 6.1 rom solved so many problems for me, but still this one SD Freeze after Sleep mode problem persisted... This is how I overcame the issue.
First of all... what is the problem... the problem is easily duplicated if you go into sleep mode, wait a couple of minutes, then your sd card goes to sleep, then turn the device back on and run a program or application that is installed on the sd card. Your device will freeze and if it didn't freeze this time, try it a few more times... it will freeze. To overcome this issue, as stated above, go into Resco Explorer and open up the SD Card and then your SD Card has been "woken up" so to speak and then everything is good again. But how does one automate the process? You must do this.
Install S2U2 - Swipe to Unlock 2, after configuring it, go into the "STU2 Settings", then go to "Others" in the options area, then point it to Resco Explorer. Now the nifty thing about Resco Explorer is that you have the option have it default to open in any directory that you desire. So of course, set it to "\Storage Card" ... that's all. So basically whenever your device goes to sleep, it will automatically open up the SD Card once you want to use your device again, so it will never catch you off-guard again. The problem is solved. Now.. for the next item, I really want to just close Resco Explorer as soon as I open it, can one make an executable batch file in Windows Mobile? Then all our problems are truly solved. I notice that I have to hover in the SD Card area for about 3 seconds for the icons in the root directory to populate. I assume you need to have Resco Explorer kinda on a timed delay.. So you use Swipe to Unlock 2 and then it should open up Resco for about 3 seconds and then quit. I don't want to minimize Resco, I really want to quit it so if the device goes into sleep mode again, then it is already set for next time. I notice the icons are cashed in memory wen I leave the program open, so I always have to go up and down a couple of directories in order to "Wake Up" the card.
If someone knows how to make some kind of script that would open up my Resco for a couple of seconds and then close it, man that would sure be appreciated. Thank you.
-Kili.
Click to expand...
Click to collapse
Do you know MORTSCRIPT? I think that this is exactly what you are looking for...
Unfortunately I'm just a beginner on this program.
Although the above solution would probably work (and so does navigating to the app and running the EXE directly), my preferred solution is just to install everyting in main memory. Its annoying to loose a feature like that, I know, but so far all of the apps I've wanted to install on the SD card came to a total of about 10MB, so its a lot easier just to install them in main memory and be done with it.
Maybe someone could write a mortscript to read the contents of a text file in the root of the SD card before lanching the chosen app?
I believe Schap's advanced config 3.3 will do the trick
http://www.touchxperience.com/en/applications/view.download/11/21.html
It has lots of settings and tweaks
Just goto power management and disable SD card
It worked for me
Holy crap! #2.... and I mean a big #2 Holy Crap!
Wow.. if this works... I will report back later, right now I am testing it. I will let everyone know if it works, but if the SD Card doesn't go into sleep mode, then this problem is totally solved.... WOW! I will check back later and let everyone know.
[Update - 12:36pm - Tokyo Time]
No freeze as of yet, Schap's advanced config v3.3 has done the job. However my activesync is now disconnecting after 5 minutes of being connected to the computer, it is still charging but it just disconnects. So, I assume it has something to do with installing Shaps, it is not a big deal. To fix it, I went into the power options in Schap's advanced config v3.3 and I disabled the power saving feature for "AsyncMAC". So hopefully that will do the trick. Another interesting fix is for the icon disappearing problem. There really is only one solution that I can find that works in both windows mobile 6.5 and 6.1. Go and change the icons using an icon changer and have the icons stored locally and not on the SD Card. Then everything is fine, then you now have a perfect device.
That is all she wrote my friends, we now have working devices. Really we need to make a sticky for these two fixes. This needs to be implemented into every rom, this is the biggest problem for our devices and they have been solved by the good members on this board, I wish i could take credit for something, however heheheheh, I can't. Wafeeq YOU ARE AWESOME. Thanks man for the suggestion.
Freezing Problem - "Schap's Advanced Config v3.3" - http://www.touchxperience.com/en/applications/view.download/11/21.html - Go to power management and disable the power saving feature for the SD Card.
Missing Icons Workaround for WM 6.1 - "SK Shortcut Manager" - http://www.s-k-tools.com/index.html?sksmgr/m_sksmgr.html - One needs to change the icons for programs installed on your SD Card, remember, use icons located in the main memory and not on the SD Card.
Missing Icons Workaround for WM 6.5 - "JWMD Icon Changer" - http://forum.xda-developers.com/showthread.php?t=567080 - Again, one only needs to change the icons for programs installed on your SD Card, use icons located in the main memory and not on the SD Card.
Thats it... fricken awesome shizenziebittle I am so ecstatic right now. Everything is done, I can just enjoy my device now. Yai.
-Kilihappy.
Kilihari said:
Wow.. if this works... I will report back later, right now I am testing it. I will let everyone know if it works, but if the SD Card doesn't go into sleep mode, then this problem is totally solved.... WOW! I will check back later and let everyone know.
................
-Kilihappy.
Click to expand...
Click to collapse
If the SD Card doesn't go into sleep mode, that means that it's always draining current from battery. Please confirm battery consume
Best Regards
Related
Hi everyone,
This is my first time posting.
I am a complete novice to this, and I'm looking for help. It this question has already been answered, then can you please point me in the right direction, cause I've had a look, and I can't see this issue anywhere.
I've had my HD2 since January, and it's been fine, till now. I tried to install an apparently "fixed" Swype specifically for the Telstra version of the HD2 found at , cause I really wanted to install it, but it never worked, however that's not my issue.
There must have been a virus or something on it, becuase all it did was successfully put my phone back in the stone age. I've lost all of my email sync, the contacts, settings, photos, and the biggest issue which I would like help with, my phone can't find the SD card any more...
Has anyone heard of this problem before? And if so, how can I get it to work?
It's not like the problems in the thread "SD card NOT reading" in the HD2 General page, it's that the phone does not recognise the SD slot any more... It's just vanished. I'm trying to search for it by going to file explorer, then tapping on the top left corner where it used to say "My Devide" and gave me the option of "external storage" or something like that...
If you need more information about ROM versions etc., please let me know how to get to it, and I'll let you know.
1. sign up for microsoft myphone
it will backup daily all contacts, sms, pictures, documents, etc.
It is free
http://sn1-p2.myphone.microsoft.com/mkweb/Start.po?mkt=en-US
2. At this point, you are just going to have to start over. If you don't hard reset often (I usually do twice a week flashing), then you might want to look into a backup program. Backup once a week then you won't lose everything if this happens again:
http://www.spritesoftware.com/
http://spb.com/products/backup/
Both of these are good programs.
Cheers for that. I'll definately be doing that from now on, however it doesn't really help me with getting the SD card recognised again...
Looks like Your phone is connected to your computer as disk-drive (or "locked" in that position)
Look in your system settings (windows key, options, more) Connetcion > USB to PC.
Which option id selected? (Activesync, Disk Drive or Internet sharing)
ok folks, glad to find this place, hope you can help, I bought a new phone BEFORE the USA hd2's came around and I paid extra to have IGO8 and SWYPE installed. well phone just took a fit and sent in for service, BUT I looked on my sd card and thats where I saw IGO8, so I left it there, knowing this was the program file, I saw SWYPE in the device under programs and copied it to SD card to make sure it would be safe there.
Well now I got phone back and copied Swype back into device programs where it came from, and left IGO8 on the sd card where it came from, NEITHER will work for some reason?
IF I go back into sd card and hit execute IGO8 it starts and operates as designed BUT IT WAS under my start window originally, and I clicked on it there and it would start from there,
NOW went under messaging, opened up and cannot find an option for swype, but I put it back into device programs AND DID nothing with it after that, so maybe it is in right spot just need to do something, PROBLEMS ARE PROBABLY EASY FOR YOU GUYS BUT SUCKS FOR ME, I AM REALLY REACHING OUT HERE GUYS SHOW ME THE HOWS PLEASE.................
Hey guys I rooted my Atrix about a month ago using gingerbreak and I finally got a new Bluetooth for it but when I try to turn on the Bluetooth on the phone it attempts to then dose nothing. I have tried restarting the phone and it didn't work. I don't know what else I can do besides factory restoring it, and if I can avoid that I would like to. Any ideas besides that?
Thanks,
Adam
No one has any ideas?
I have the same issue on two different phones. A soft reboot usually gets it working again, until I toggle it off. Then it won't turn on til next reboot.
I have the same exact problem.... tried a lot of things, but none succedd
Sent from my MB860 using Tapatalk
I tried battery pulling it and that didn't work either sadly.
Okay, Maybe this info helps. I believe its has something to do with a specific program being moved to the SD Card or sd card mounting.
I just had this happen. Bluetooth would not turn on at all. I decided to play Chuzzle and when my battery went low, I plugged the phone into my comp USB port. It disconnected the SD card in lieu of mass storage. Killed my game because it resides on SD Card. At this point, I decided to test bluetooth and it worked!! Don't have time to test it further but. I suspect something residing on the SD card maybe the culprit. Unfortunately, I have over 30 things on it so segmenting out is going to be a pain.
Do you all have programs on the SD card?
Yeah, i moved 111 apps using apps 2 sd... cant tell which one is related to bluetooth...
Sent from my MB860 using Tapatalk
I was having the same trouble and noticed that plugging in USB in storage mode would "fix" my bluetooth... I used Optimize Toolbox too clear all my cache and remove old SMS messages (after a backup) and bluetooth seems to be working again
*Edit* this didn't seem to last after I moved a few apps back to the SD card... I'm giong to keep messing with this...
after much pissing around with moving apps back and forth the internal SD card no longer mounts when i plug into my PC... interesting... I'll continue to report any progress I make
I've removed the physical SD Card and determined the problem lay in the internal SD Card...
ok after some seemingly "random" application moves from SD to phone I have this "working". I think it's a possibly corrupt internal SD but I haven't gotten any of the warnings that I see other people get where the phone explicitly says as much, however here is why I still suspect it:
as I was using Optimize Tool Box to move apps I noticed it was moving them rather slowly and taking a few extra seconds to re-load the app list, after one move (a Dolphin HD plugin full screen froyo incase that matters) I noticed the refresh seems snappier,
I went out to my home screen and hit a bluetooth widget and BT started working, I tried moving a couple different apps back and it stopped working.
Here is a full list of apps I moved OFF my SD in the event that it is still app related and a list of my apps might be handy to see who has common apps
Remote VNC Pro
My Tracks
Knots Guide
ConnectBot
Retro Defense
Best Apps
FBReader
Fullscreen for Froyo
Net Ping
AndFTP
Amazon Kindle
BlastMonkeys
KeePassDroid
Terminal Emulator
AndroZip
DailyComix
Dungeon Defenders
SilverEdit
Linux Commands
Handcent Emoji Plugin
Movie Free
My Backup Root
OSMonitor
Handcent SMS Skin(Metal)
SMS Backup+
Thinking Space
I hope this can help someone fix their phone or better yet get us a litter further towards an actual solution.
These are on my list. They should not be moved to SD:
Firefox
Brain Cube
Rugby
Anyway, the problem seems to be solved on 4.5.91. I've been moving apps all day and yet my bluetooth is still working.
Hi folks,
has any of you seen this?
I have the atrix 4g, I have a 16GB sd card, I copied some files (like 2GB in mp3) to the sd card, I safely removed the device from my computer, then from the atrix status bar I changed the usb mode to none and it mounted the card just fine, but now when I try to open apps like gallery, music player, files, or even winamp, they will just hang and I have to force close application.
Also, it drying out the battery very quickly, is like is hanging in trying to read the files.
What can I do? I don't want to have to reset the phone.
Any ideas?
Hi, ok I found the process taking all the cpu, is android.process.media, I dont know what is trying to do, how can I tell why is hanging?
I cant stop it either, is it important?
Thanks
scmaverick said:
Hi, ok I found the process taking all the cpu, is android.process.media, I dont know what is trying to do, how can I tell why is hanging?
I cant stop it either, is it important?
Thanks
Click to expand...
Click to collapse
I've had this problem twice. I think that the Atrix's software cant handle so much new media at one time. The first time it happened I ended up preforming a factory reset, which fixed everything (Make sure to back up first!) The second time was when I was adding lots of music again, and since I'm doing this constantly, I ended up unlocking and flashing to CM7.
hmmm yes this ain't my first time with this problem either and i had to reset as well. but that's too much work, i have a mod for the lapdock and having to reinstall is a real pain. but anyway I've manage to kill the media process with the kill -9 command using the terminal emulator as root and t this released everything else, gallery and music are working fine. i still don't know what will affect if i don't let the process start again, i might look for an app that would help me prevent it from starting , but if it causes any pain i will try maybe another flash like you said .
thanks
ok, I might have found another solution, may be too prompt but wanted to share.
I kept searching on google and found more options, since killing the media process wasnt very useful, eventually it would start again and hang everything. Basically, go to Settings, Applications, manage applications, all, tab on media storage and then Clear Data, go back tab media share and clear data, then reboot the phone.
After reboot the media process will start again and will scan all drives, I can see it taking something between 20 and 40%, the common at 25%, is way below the 60% that it was using before, so I gave it a second chance and let it running for a while.
Indeed, after some minutes it finished the rescan and cpu went back to 0% on the media process and I was able to open gallery, music, etc.
So, I kept all my files in the sd card, didnt have to factiry reset and the media process went back to normal.
Hope this is permanent, and hope it works to anyone else with the same.
cheers
I have a Samsung Galaxy S5 with update 6.0.1 with the latest security patch level applied 11/1/16. Recently my microSD card status will go between two indicators in the notification bar: 1) SD card - For transferring photos and media, or 2) SD card was removed, please insert a new one. In both cases the same micro SD card remains in the phone. When I receive the message that the card has been removed, I can click on Storage in the Settings menu and see that only internal storage appears. At some point the SD card will reappear with the message from #1. I can restart my phone, I can turn it off and back on again, etc. but none of those things seem to alter the phone status of identifying that an SD card exists in the phone. It's quite annoying especially when I want to take photos or am transferring data from internal storage to the SD card when it suddenly becomes "removed". However, again, the change from being considered installed/mounted or missing/removed will happen at any time whether I'm using my phone or not. I've started to wonder whether I picked up a virus by visiting a site while reading news through the Google Play Newstand., which I've been doing a lot lately,.. but I've installed/uninstalled at least 5 different anti-virus/malware software and nothing is identifying a problem on my phone. AVG, McAfee, Bitdefender, Kaspersky, Malwarebytes Anti-Malware.
The only other oddity I have noticed about the same time is that I have Verizon Protection and Support which suddenly acted like I had never used it before and made me agree to the terms of use again - once I say ok to the terms, it returns that it cannot access data and try again later. Nothing I have done related to that software has worked and Verizon's only suggestion is to factory reset in which some users indicated that did not resolve the problem.
Has anyone else experienced either of these issues and found resolutions? Thank you in advance for any assistance you can provide.
sparky99kms said:
I have a Samsung Galaxy S5 with update 6.0.1 with the latest security patch level applied 11/1/16. Recently my microSD card status will go between two indicators in the notification bar: 1) SD card - For transferring photos and media, or 2) SD card was removed, please insert a new one. In both cases the same micro SD card remains in the phone. When I receive the message that the card has been removed, I can click on Storage in the Settings menu and see that only internal storage appears. At some point the SD card will reappear with the message from #1. I can restart my phone, I can turn it off and back on again, etc. but none of those things seem to alter the phone status of identifying that an SD card exists in the phone. It's quite annoying especially when I want to take photos or am transferring data from internal storage to the SD card when it suddenly becomes "removed". However, again, the change from being considered installed/mounted or missing/removed will happen at any time whether I'm using my phone or not. I've started to wonder whether I picked up a virus by visiting a site while reading news through the Google Play Newstand., which I've been doing a lot lately,.. but I've installed/uninstalled at least 5 different anti-virus/malware software and nothing is identifying a problem on my phone. AVG, McAfee, Bitdefender, Kaspersky, Malwarebytes Anti-Malware.
The only other oddity I have noticed about the same time is that I have Verizon Protection and Support which suddenly acted like I had never used it before and made me agree to the terms of use again - once I say ok to the terms, it returns that it cannot access data and try again later. Nothing I have done related to that software has worked and Verizon's only suggestion is to factory reset in which some users indicated that did not resolve the problem.
Has anyone else experienced either of these issues and found resolutions? Thank you in advance for any assistance you can provide.
Click to expand...
Click to collapse
Try Using your device without SD card for some time and then put that chip again. If the situation persist try wiping Cache of Your phone.
There is probably to many webdavs using all your cu. Obtrusive. To root or not to root. Providers say that root is what causes issues of vulnerability. You get these problems ether way but you can only fix with root.
What ever the problem is formatting your car should straighten it out. If you don't want to arrange your files a quick fix for webdav is to use root explorer. Search for "nomedia"and delete them all. Hopefully only apps you want have a good enough grip to put them back.
Sent from my SM-N910P using Tapatalk
abhinavp649 said:
Try Using your device without SD card for some time and then put that chip again. If the situation persist try wiping Cache of Your phone.
Click to expand...
Click to collapse
Thank you. I don't know how long you mean for "some time" but I did for about 30 minutes. I did use McAfee to clear app cache to free up space but I just checked and my current message is "SD card removed. Insert a new one" so apparently that didn't do it. I' did not allow it to clear thumbnails though.
planb234 said:
There is probably to many webdavs using all your cu. Obtrusive. To root or not to root. Providers say that root is what causes issues of vulnerability. You get these problems ether way but you can only fix with root.
What ever the problem is formatting your car should straighten it out. If you don't want to arrange your files a quick fix for webdav is to use root explorer. Search for "nomedia"and delete them all. Hopefully only apps you want have a good enough grip to put them back.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Well, until now I considered myself fairly tech savvy... but I am not sure what webdavs are or what it means to root or not. Is root explorer software? And then, the next question is where would I search for "nomedia"? If you'd rather I do more research on these myself I can do that, no worries... but if they are easy enough to explain that would be great. Thanks so much!
sparky99kms said:
Thank you. I don't know how long you mean for "some time" but I did for about 30 minutes. I did use McAfee to clear app cache to free up space but I just checked and my current message is "SD card removed. Insert a new one" so apparently that didn't do it. I' did not allow it to clear thumbnails though.
Click to expand...
Click to collapse
Some time means at least a day.
And wiping Cache here I meant Clear the Entire Phone's Cache through Recovery
Good browsers have a search bar in them. A web dav is a network connection to a folder. If it is causing your card not to work now than likely it was put there by a demon and you want it gone. If you don't know what root is then you are a long ways out from putting up a fight. The only thing I could really advise you to do is do a factory reset that includes formatting the card. If you do ever decide to root be very careful the method.
Sent from my SM-N910P using Tapatalk