I would like to ask whether is it possible or not to upgrade Manila without flashing ROM and then I was wondering if it makes sense....
In theory, it could be possible.
But in reality, there is no cab, nor would anybody recommend to install such a massive thing through a cab.
You could try manually copying Sense packages contents to device. It works.
Related
hello,
Would anybody be so kind to give a step by step manual of switching from t-mobile 1.60 to qtek 1.66 please?
please note: i have no idea what i need to do with those passwords, neither with what it says on this link:
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
Much too complicated for me... :roll:
Isn't there a different way to upgrade to a different ROM?
thanks for your help.
John
Why would you want to do this? To get QTEK features instead of T-mobile? If so, there is a much easier way than flashing...
1. Unhide/Unlock your extended rom (see front page of site in top news article).
2. Remove all of the files from your extended ROM
3. Get a copy of the New Extended Rom files you want. This forum tells how to do that.
4. Copy them into the extended rom area of the device.
5. Hard Reset -- you are done.
You never touched the Radio Stack, the Main OS, and did not have to flash, which is much safer way of upgrading / changing.
Make sure you copied all of the files from the new EXT ROM, not just the CAB files (but you can delete the odd CAB file if you know which one and why you want to do it)
can someone here tell me how to make cooked roms?
I want to make one for myself but i don't know how.
Wanna make WM2003SE with a little software addition.
And what tools r i'm gonna use.
cooking rom is only for xda1's
but you can unlock the extented rom and add programs there
http://wiki.xda-developers.com/index.php?pagename=ER2003Edit
so...
How can I change my bootloader image?
If I can't cooked my own roms what do i have to do if i wanna make my O2 XDA2 become WM2003SE with a few preinstalled program that I need.
Cause everytime I format all of my data will lost right.
I heard that WM2k5 doesn't lost it's data when the battery is empty.
thanks b4
is there extrom unlocker for xda2i?
Hi everyone. Just wondering if there's any possible (preferably free) way to get other language packs/fonts on the mogul. I was looking a japanese website and got frustrated when 90% of it was in block form....=(
Any help would be appreciated. Thanks in advance.
You want type/read Japanese on your mogul? I am a Japanese, so I can help you
First, do you cook your own ROM or do you use pre-built ROM?
If you cook your own ROM, this method will be far more stable:
Method 1 (stable) (designed to work only with dcd kitchen...)
Extract WinCENLS_WWE.zip to your kitchen's SYS directory, overwriting the WinCENLS_WWE directory and all the files inside. Make sure wince.nls was overwritten or else you will fail.
Extract Localize_Japanese.zip to your kitchen's OEM directory, and when you go to build a ROM, ensure that "Localize Japanese" is checked in BuildOS as an option under heading "Localizations" (it should be at bottom).
If you have any failure about SIP, hive file, etc... please don't continue and tell me about your trouble and we can go from there. This will NOT work with any other software that make use of SIP type "IME" like HTC xT9 IME keyboard... make sure only one "IME" type software will be installed.
Now, I can't make the IME.cab file into an OEM package. I tried, and fail. If you can make an OEM of it that will work by dcd and other files in the localization, great - and please send me a copy! But, I don't think it can work right now. Anyway, after burn this new ROM to your Titan, launch IME.cab through your SDconfig.txt file.. that way, everytime hard reset will happen, you will not have to think, "Oh, I need to install IME before I can use my phone."
Files:
Localize_Japanese.zip
IME.cab
Alt WinCENLS_WWE.zip location
Method 2 (unstable)
Install asukal's version of this by making use of his program called usemynls.exe which patches wince.nls to another wince.nls from a ROM already built with the 0409 version of the file. This causes system instability and often times you cannot send or receive more than 2 or 3 text messages without causing the machine to need a soft reset. It's highly annoying and not at all correct. But, it works - sort of.
Here is files:
AsukalLetsJapanNo6
IME
Goodluck with method 2 if you do decide to use it...
arigatou gozaimashita!
kondo ROM-wo cook suru toki, Method 1-wo tsukatte-mimasu!
Thank you very much for the info, illuminarok. I'll see if i can make an OEM and get back to you. Thanks again!
Hello All,
First off I want to say I have done a lot of searching in this forum and many others concerning my problem. My problem is trying to switch the TF3D theme from the stock verizon theme to the original black. From what I have read, I have been instructed to dl Diamond TF3D Config Setup, which I did many times. It loads successfully, but when I launch the program it gives me an unexpected error message. Does anybody know what is going on and how I can fix it? Does it have to do with it being a verizon phone; ifso, how can I change my theme?
Thanks.
Hello Noobie
Yea you need to delete the tweaks and it should work. You should also switch your roms. Verison software is horrible-by far the worst. Very slow.
Thanks alot. Its just that one file within the cab right? So I would delete this before putting it on my phone and running it?
Also, I really do want to flash the ROM, but I'm still not sure which one to use. Any recommendations? Are they stable enough at least as much as the stock rom? I just don't want to flash a rom with hella stuff on it that takes up memory and compromises stability and reliability.
Thanks again.
You need to install .Net 3.5 in order for Diamond tweaks to work. Search for .net framework 3.5 and install that first.
i already intstalled 3.5. still did not work. but i have not tried deleting the tweak file. im just not sure if ineed to delet on my computer before i move the cab to my phone and run it.
hi guys can any one till me where can i downmoad the full file of .Net 3.5 ? i mean the 37mb file not the 2.6mb from microsoft website. i have internet only in my phone and i ca't have access to pc with internet. so if anyone can till me where to find the full size .net 3.5 to download i will be thankfull
mytheory. said:
i already intstalled 3.5. still did not work. but i have not tried deleting the tweak file. im just not sure if ineed to delet on my computer before i move the cab to my phone and run it.
Click to expand...
Click to collapse
Yeah, after you have it installed, go out and delete that tweak file and it will work like a charm.
jus use tf3d configuration,works all the time for me
Using tweaks
I stumbled across this zip file the other day.If u wana use the tweak just replace the tweaks.xml with this one. Im not sure who credit for this file belongs to. But if it is yours or u know whos it is let me know and i will definitely give credit where it's due.
help with themes
So have i been searching around for a while and have not been able to figure out what the hell i'm doing wrong...
i installed DiamondTF3d conf tool, i downloaded some themes (.cab(s)) but i was not able to find them while going through TF3D config. I'm sure it's something simple i'm not dong, any help would be appreciated.
well the one i used (the Htc black) was a .theme i think
Yeah what a bummer. I cook up a great ROM and now no CABs will install! The WCELOAD.EXE is in its correct place and the likes but the Customize program will not install its appropriate CABs so I don't have my VZW carrier cab, my device won't connect to the internet (besides IE. The default "The Internet" connection is absent.), and I can't change the WM theme (a minor issue but I know it must have something to do with the malfunctioning system).
This ROM was cooked in ERice's kitchen which usually spits out extremely nice cooked ROMs so I'm assuming this isn't a problem with his kitchen. I don't want to have to reflash but that may be the only option. If there's an EXE that my device is missing, please post.