I'm using the latest wmwifirouter software (2.0 i think) on my uk hd2 with the latest unbranded rom 1.66. However, the program often becomes unresponsive requiring a soft reset to get it working again. I've tried going to the task manager to close it be it still seems to run and It won't start up again.
Any ideas what could be causing this?
Does anyone else have this problem?
yeoldgreat1 said:
Does anyone else have this problem?
Click to expand...
Click to collapse
I am having a similar problem. Using wmwifirouter on my hd2 as a wireless adapter (wifi to usb) after several hours, the program will cut the incoming data and become unresponsive. When I try to exit the program, it gets stuck at rebinding the usb connection and CPU usage jumps to 90% and requires a soft reset for the phone to become usable again.
Related
Has anyone noticed that Activesynch over USB is much less stable in WM2003?
Frequently after a few uses, the XDA will no longer be recognised by the PC unless I perform a soft reset. It seems to happen every time if the PC goes into standby while connected.
This didn't used to happen so often with 2002.
It's odd becasue looking at device manager, the PC knows the XDA is connected, but activesynch isn't playing ball. Happens on both my PCs.
Anyone else having the same issue? / found a solution?
Thanks,
Fredrick
sometimes this issue happens, and i found the best option is to renew the partnership ... also make sure you have ActiveSync 3.7.1
After an upgrade to dcd latest ROM 2.2.6 and Radio I have found that when my phone sleeps or I turn it off it doesn’t always turn back on I need to soft reset it. I am even tried an earlier Rom version 2.2.1 and still the problem.
This is a Telecom New Zealand phone and as for normal practice they don't give out their Rom's so I can't just flash back
With some playing I think I have tracked it down to only causing this issue when my data push is enabled ie, don't sync up to an exchange server and the phone works fine.
I am aware from other posts there are others out there with the same issue, can you check if this is the same with your phone. Turn off all your data connections and delete your exchange server and see if you phone then behaves.
I know people are saying it could be the Bootloader but if the above is the cause then I don't think it is in the loader and maybe dcd can help us track it.
I have tracked this problem down to when activesync does a Microsoft Direct puch while the phone is in standby. To connect to our work's mail server we need to also create a VPN connection (not using SSL) as long as I put in a wrong name or password causing activesync never to be able to sync then the power button turns the phone on everytime. If I also connect and sync (while phone is on) then dissconnet my VPN and and change password then the phone still works fine.
Does anyone has any idea where I should be looking, as I would like to have my Direct push email working.
Sorry to jack your thread, but I have a very similar problem. Sometimes when my phone goes on standby when I'm on the phone and my conversation is finished. I cant power back on my phone either. The green light still flashes, but the power button does nothing! Anyone have that same problem?
I've also had this problem. When I press the power button the phone would enter standby mode and when I pressed it again it wouldn't wake up. The only way around it I found for my phone is to install S2U2 and set it so it activates when the backlight turns off. That seems to catch it before it whatever happens to not let the phone wake up happens. So now when I press the power button, the screen cuts off and S2U2 opens. Hope this helps.
I have similar problems. Maybe I'll try using S2U2 ...
Same problems, doesn't seem to wake up if it goes to sleep while VPN is running... any fix?
I had the same issue when I flashed my ROM with the USB connection. It could be the bootloader. because I then used the SD card bootloader and re-loaded my ROM from the SD card and it resolved the issue.
I would recommend reinstalling from the SD card using the no2chem.
I find that my Sprint titan is, at times, very unresponsive. Usually it will happen after having not used it for a few hours. After I wake the phone up, I'll notice that most tasks require multiple inputs before sensing the touch. (ie: if I wanna open the start menu I might have to touch it 3-6 times before the phone opens the start menu) It is not just the touch screen; the buttons are just as unresponsive when the issue is present. After a about a minute or two of use while I'm having this issue the phone will become more and more unresponsive, finally I might have to press an item 10-20 times before the phone opens it. At that point I need to reset the phone in order to restore normal functionality.
This used to happen to me using DCD 3.01 and I hoped it would not happen on the newer 3.04 but same issue remains.
Something that is unique to my situation is that I'm in the US navy and currently deployed, thus my titan will never get a signal. Being that I can't find anyone else with this problem it leads me to think that it might be related to never having a cell signal as most people who change their ROM probably are on the network.
Just to let you know, I have had this problem. I think I limited it down to IM+. With just the included applications running, this did not occur.
I've never used IM+
I'd suggest that both of you list ALL apps that you added to the ROM.... That way we can cross reference what you both have in common when the issue happens, and can eliminate OEM's one at a time....
I didn't add anything to the roms. Just donwloaded the rom and flashed it.
I installed Mortplayer and HTC home 2.0 + HTC home customizer 1.0. Those are the only two programs I have on my titan.
Then it could be HTC home. I found what specifically lags me about IM+ is the home screen plugin. Try disabling the HTC home screen plugin.
I'm having this same problem. It started after updating to the new Rev A/GPS Rom from Sprint. I've just recently noticed that when the device becomes unresponsive, the signal strength icon is showing data transfer. The device is acting like it is becoming bogged down while sending or receiving a large amount of data. The last time it became unresponsive, I hit the Com manager button, triggered airplane mode (thereby killing the data connection), and the device instantly became responsive again.
The only thing I have running in the background is Outlook which is checking my Gmail every 15 minutes.
I do have HTC home and Home Customizer on it though. Anyone seeing a pattern here??? I do not use IM.
I ran across Spybot Search & Destroy for WinMo standard and PPC last night. was thinking of installing it and see if it discovers any possible malware. I highly doubt it though since I never surf to unknown websites or open unknown mail.
I should also say that I did make some reg edits for better power management. But they were done with the previous Sprint Rom AND after the new Sprint Rom was installed. Never had a problem when running the previous Sprint Rom.
Anyone else noticing this happening when data seems to be transferring? Anyone try disabling the HTC home and Home Customizer?
HTC Home is a huge memory leak, the worst of any PPC application I've ever run
it dumps tons of useless info to the kernel log which may be the cause
I would suggest rltoday, there are htc home clone themes available
Thanks so much for the info DCD!! Checking out rltoday right now. Possibilities look endless.
I'm bumping this thread because I have the same problem all the time. The issue appeared on No2Chem's ROMs and DCD's roms. I have many programs installed, but it sounds like this occurs even with no programs installed. Did anyone figure out a fix for this?
It is quite annoying to find my phone randomly very unresponsive to any key press (touch screen or hard buttons).
By the way, could it be our radios? I'm using 3.42.30.
Interesting - I've been a user of DCD roms since pre-3.01 on my XV6800 and have never had any problems. After installing 3.3.4, however, I did experience these exact same symptoms. I tried removing applications, today plugins, etc., but the issue persisted. As a last resort, figuring it was just some incompatibility with my configuration and not the rom, I rolled back to 3.2.6 and all has been fine so far.
Hi..
i used the search but could not find anything..
I am having some issues with eh phone..
it freezes up when even i want to use it..
i can use it for a few minutes and then freezes up.
everything goes really slow or just doesn't react.
i didn't open anything special
just tried a hard reset..
only added google maps but didn't open it.
have exchange and hotmail syncing.
that's it..
soft reset helps for a few minutes and then it crashes again..
i really have no clue why this happens..
does anybody have a suggestion that i could try?
Thxn!
Well, could be simply a hardware problem (either a faulty one or f.i. a loose connection after dropping it).
Do you use your S740 only since a short while (new device) or have these problems started after a while ?
I use it now for a year and 4 months (actually with quite a few apps installed) and it's incredibly stable.
Sometimes it gets a bit slow, and then I do a soft reset.
But thats maybe bi-weekly.
I suspect that using McGuider navigation software alongside other apps (like Opera mini/java and Audio Notes and always bluetooth on) is the cause most of the time.
Only with SmartToolkit I had some structural problems of freezing.
There's one thing you can try:
I did read in some cases with people with serious problems, who needed a hard-reset, that only after a few hard resets their S740 again worked as new.
So try a few more hard-resets.
good luck
peseta said:
Well, could be simply a hardware problem (either a faulty one or f.i. a loose connection after dropping it).
Do you use your S740 only since a short while (new device) or have these problems started after a while ?
I use it now for a year and 4 months (actually with quite a few apps installed) and it's incredibly stable.
Sometimes it gets a bit slow, and then I do a soft reset.
But thats maybe bi-weekly.
I suspect that using McGuider navigation software alongside other apps (like Opera mini/java and Audio Notes and always bluetooth on) is the cause most of the time.
Only with SmartToolkit I had some structural problems of freezing.
There's one thing you can try:
I did read in some cases with people with serious problems, who needed a hard-reset, that only after a few hard resets their S740 again worked as new.
So try a few more hard-resets.
good luck
Click to expand...
Click to collapse
Thank you for the reply..
its not a new phone..
worked perfect the last couple of months.
this just started this week..
I will try doing a few more hard resets.
Hope that works...
Thanks so far!
Hy
I had the same problems after Hard Reset.I fixed it by Loading the akku to 100%,Switching off the phone,Removing the akku,Removing the SIM,Removing the StorageCard,Insert the Akku,Hold Down the Volume down button+the button in the middle of the cursor und short press on the power button and folow the text on the screen!Let the phone finish all and let it reboot and let it install all the original stuff!After a few reboots and when the phone seams to be finished you can install the Sim and start the phone again,let it install all the provider stuff,when its finished you can install the Storage....if you let the sim and the storage in the phone and make a reset something wents wrong at installing!
MFG
Hello,
I experience a very weird problem with my HD2.
When I want to connect my HD2 to pc then my pc (and other pc's) doesn't recognize my phone, nothing happens. Also my phone isn't giving me the option between "Activesync" "Disk drive" or "Internet sharing". (Altough the option to ask it on connection is turned on under settings). So not an active sync problem I guess. The usb doesn't seems dead because it still charges, on my HD2 the power sign comes up when I connect the usb to pc and the led is on. When I pull it out then the led goes off and the power sign dissapears. But no "data" connection is possible anymore.
Is something broken in my registry? I tried soft resetting several times.
No hard reset yet but I am waiting to do this, maybe someone here knows the answer.
I started experience the problem after I used Tomtom last week ( i used it alot already) . I experienced a problem that my HD2 was stuck in "Carkit mode" thus when someone called me he flipped the screen and putted speaker on. Even when I set it off under settings it. Navipanel was also turned on. I downloaded the hotfix from HTC for Navipanel and now that problem is gone. My phone is again in normal mode when I call or receive calls. BUT the usb data connection doesn't seems to be working anymore .
Someone here knows the magic answer ?
Can you post the Radio version and ROM version you are using?
ROM version : 1.66.405.2 (76641) WWE
Radio version : 2.06.51.07
Have you ever changed the ROM on your device or is all still origional as you got it from the store?
If origional:
1) bring it back for repair, since its not your fault
2) or install HSPL change your radio and rom
I would just send it for repair when that happens. Specially when its in origional state.
I had this problem once but at the moment i connected the phone through a USB Hub
No it is the official upgrade rom from htc site.
Phone is acting weird also.
Everytime someone is calling it puts the speaker on .
Maybe I try a hard reset for this "fkd up" software?
Would this help?
Hmm did a hard reset and the problem persists.
No usb data connection.
Speaker turns to loud when someone is calling me.
Screen flips sometimes.
Guess it is a hardware problem.
Going to turn it in.
Although I completely agree that your unit is probably on the fritz, take into account that the MicroUSB cable can be the problem as well when it comes to connecting to your pc. I bought some Ebay cables and my phone wouldn't connect properly with those. Charging was no problem.
Yes it is on the fritz i guess.
The problems started suddenly and I also tried another usb cable who was also working fine before.
I managed to get connection yesterday just once after pushing it in the phone and moving it a bit. So I guess the usb input is broken or the motherboard. Guess it is the motherboard because of the other weird problems (when want to call someone the screen turns vertically and puts the speaker on), also when i got called. And this after a fresh hard reset.
Hope they will replace the unit without a hassle.