Related
Sorted it out the hard way - repartitioned with FAT and lost all my apps. Installed them quickly enough with Applanet App Market.
Theshawty said:
Hello XDA. A few months ago I partitioned my 2GB SD-card to use with a custom made 2.1 ROM I used to have and I have not changed this partitioning ever since, I've been using it with MiniCM and it works alright.
My question is: Could I or could I not partition it back to FAT so I don't have any ext without problems? Or do I need to reinstall MiniCM if I installed it with an ext partition?
Click to expand...
Click to collapse
One thing you need to check is if you have chosen 'internal memory' as the place to download applications that you may have downloaded/installed after installing CM1.In that case,choose the 'move to phone' option so that you don't have any apps stored on your ext partition.As long as you have stored apps either in the phone or external which is the FAT partition,there will be no problem at all in getting rid of the partition.Personally,I have never liked any of these ext partitions because I think they slow down the apps stored on them!
...do press the thanks button if this helps...........
Please clearly state which ROM are you going to flash, and the current partition details, partition(s) and size, filesystem ;-)
what is the ext2/ext3 partitions being used for ? are they only for setup new roms or for use while running the device?
i havent noticed any change with or without ext3 partition beside the low space left on the 2gb memory card...
eladmagen said:
what is the ext2/ext3 partitions being used for ? are they only for setup new roms or for use while running the device?
i havent noticed any change with or without ext3 partition beside the low space left on the 2gb memory card...
Click to expand...
Click to collapse
ext partitions are required to install apps2sd or link2sd so that you can store downloaded applications there instead of clogging your phone memory.These are not required if your OS is Froyo and higher since there is a native apps2sd which helps you move applications to the main FAT portion off the sd card.
-----------press the thanks button whenever you find any post useful........
Hi everyone,
First of all i would like to thank the developers over here doing a wonderful job,
Ok so this is what i have at the moment:
clockwork recovery installed
Flashed Neojn's devoid #froyo final ROM
franco's kernel v17
now i've followed the guides over here on partitioning and installing, but seem to be doing wrong some where..
Ok on to the questons:
1)Is this Partitioning and darktremor's A2SD flashing to be done before or after install of ROM, i did it after ROM install
2) In Clockwork... there is only an option to create partition but i don't find any option to select the format like ext 2 or ext 3 or ext 4... why is this..?
3) Ok After flashing Darktremor's A2SD (by selecting install zip from location)... i don't see any app icon related to it, how can i know that its working..
4) I went to application manager and checked my previously installed applications, they all have move to sd card greyed out, is it still on phone memory or on the ext partition..
5) i checked by installing a new apk which normally installs in phone memory.. i checked it in application manager.. it too had "move to SD card greyed out" did this app install in ext or phone memory..?
6) I have not been able to locate ext partition in root explorer.. where should be it located, although my memory card size seems to have been reduced after the partition...?
7) How can i transfer dalvich cache to ext partition, should i type in the commands after installing the emulator...
Sorry but i don't seem to get it..
1. First partition, then rom, then a2sd
2. Clockwork only creates ext4 partition
3. From adb or terminal emulator type su, then 'a2sd check' , and it will show you the status.
4. After installing a2sd, the phone treats the ext partition as internal memory (in other words it is tricked) and by default all apps get installed to this partition.
5. So all apps will show that they have installed in phone memory but they are in ext parition. You can check if this is activated by using a2sd check or if you want to check for yourself, navigate to /system/sd (froyo) or /sd-ext (GB) through root explorer and you will see the apps installed there.
6. And obviously, if you have 2 gb card, inherently it is not 2 gb but 1.7 GB, and then if you create a paritition of 512 MB and then if you check in settings it will show sd card space 1.7 - 0.5 = 1.2 GB.
7. To transfer dalvik to ext partition type via terminal or adb, su, then 'a2sd cachesd'. The phone will reboot.
For more commands in a2sd, type 'a2sd help' (after giving su permissions of course) .
If u dont want typing ,download a2sdgui from market and check if its installed it will show details ,otherwise automatic close ,you can check if apps are installed in internal or ext ,and can also move dalvik to ext through this app.
So give it a try ,if u facing any problems then u can pm me.
Sent from my LG-P500 using XDA Premium App
mihir287 said:
1. First partition, then rom, then a2sd
2. Clockwork only creates ext4 partition
3. From adb or terminal emulator type su, then 'a2sd check' , and it will show you the status.
4. After installing a2sd, the phone treats the ext partition as internal memory (in other words it is tricked) and by default all apps get installed to this partition.
5. So all apps will show that they have installed in phone memory but they are in ext parition. You can check if this is activated by using a2sd check or if you want to check for yourself, navigate to /system/sd (froyo) or /sd-ext (GB) through root explorer and you will see the apps installed there.
6. And obviously, if you have 2 gb card, inherently it is not 2 gb but 1.7 GB, and then if you create a paritition of 512 MB and then if you check in settings it will show sd card space 1.7 - 0.5 = 1.2 GB.
7. To transfer dalvik to ext partition type via terminal or adb, su, then 'a2sd cachesd'. The phone will reboot.
For more commands in a2sd, type 'a2sd help' (after giving su permissions of course) .
Click to expand...
Click to collapse
Thanked You, for the details provided.. will check out and post my findings
Nimitmak said:
If u dont want typing ,download a2sdgui from market and check if its installed it will show details ,otherwise automatic close ,you can check if apps are installed in internal or ext ,and can also move dalvik to ext through this app.
So give it a try ,if u facing any problems then u can pm me.
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
Thanks mate, i'll download it from market and post my findings here...
You're welcome I forgot a2sdgui, because i prefer the commands, get it from market, it will provide a GUI to those commands.
OK mates
I have located the ext partition using root explorer in system/sd, really i am relieved now, thank GOD
I ran A2SDgui, it started, i have the led on for "Apps are on SD button", however its off for "zipalign on boot" and "swap is deactivated" anyone knows what they do?
Whats the low memory tab for ?, by default its set to "strict low memory settings"
Under system info - general info
I have got SD-ext using some space, this shows its working i suppose, and whats the /cache/ i have total of 64mb and 63mb is free, what does that do?
And Suppose if i want say for a widget to be on phone memory, how do i turn off this feature just for that ?
One final question, Where does clock work recovery mod actually live in phone, is it possible that we can delete it and brick our phone, i always thought that flashing a new rom wipes everything on phone including clockwork, but i am wrong i suppose...
Sorry for my never ending questions .. but i am curious
Finally i am free from that dreaded low memory message, thanks to people over here
Don't touch the zipalign, swap and low memory settings unless you know what you are doing.
The recovery resides on a separate mount-point ( separate partition if you will) and flashing a rom does not erase it.
Unfortunately, with DT a2sd you cannot selectively choose which apps should be on internal or on ext partition. For that check out Link2sd on the market. It will allow you choose which apps to put on ext and which on internal. Keep in mind, if you want to use link2sd then it's best to use it on a fresh flash as a2sd and ink2sd don't work together.
The cache partition is another partition which stores cache files and as a temporary download location. Don't worry about it.
Sent from my LG-P500 using XDA App
mihir287 said:
Don't touch the zipalign, swap and low memory settings unless you know what you are doing.
The recovery resides on a separate mount-point ( separate partition if you will) and flashing a rom does not erase it.
Unfortunately, with DT a2sd you cannot selectively choose which apps should be on internal or on ext partition. For that check out Link2sd on the market. It will allow you choose which apps to put on ext and which on internal. Keep in mind, if you want to use link2sd then it's best to use it on a fresh flash as a2sd and ink2sd don't work together.
The cache partition is another partition which stores cache files and as a temporary download location. Don't worry about it.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Thanks a ton bro. I have decided to stay with A2SD for now. will move to link 2 SD when a Rom based on the official gingerbread becomes available. BTW do you have any links that explain link2sd in detail..
CtrlU said:
Thanks a ton bro. I have decided to stay with A2SD for now. will move to link 2 SD when a Rom based on the official gingerbread becomes available. BTW do you have any links that explain link2sd in detail..
Click to expand...
Click to collapse
Oh, I don't know; see the market description, or as always, google is your friend!
This thread answered a lot of my doubts about the partitioning. However, i did not understand if the card should be partitioned after or before the install of the ROM? Will there be a problem if it is done after because I am getting a 16GB card tomorrow but I've already flashed a custom ROM using the 2GB stock lg card? Or should i re-do everything again to be safe?
Sparkyte said:
This thread answered a lot of my doubts about the partitioning. However, i did not understand if the card should be partitioned after or before the install of the ROM? Will there be a problem if it is done after because I am getting a 16GB card tomorrow but I've already flashed a custom ROM using the 2GB stock lg card? Or should i re-do everything again to be safe?
Click to expand...
Click to collapse
for your first question, it should be partitioned BEFORE you flash the rom and other stuffs
also dont forget to read the pink words in my signiture
and for card changing, its simple:
first make a nandroid backup, choose all stuffs including ext-partition
then partition your new card (better the same size as before idk just feeling better with that)
nandroid full restore.
and reboot then all things will be cool dont have to redo stuffs
but for the worst situations better make a full titanium before changing the card!
good luck and hope i helped
Has anyone got this working? I used to have Link2SD in 2.1 but now the ext partition is the only partition recognized by GB and not my main partition. I can access my main partition from USB connect, but not from within the phone. Anyone has the same issue?
You can natively move apps to the SD on GB in Options>Applications>Manage applications. Choose an app that supports it and the option to move to sd will be there. No partition needed.
Thx, i will just fix up my SD card into a single partition again then
Does this also mean that I don't need the app Apps2SD anymore?
With App2SD you can quickly indicate which apps can be moved to SD. So I still have it there. Furthermore, App2SD also quickly clean your cache.
Link2SD gave the option of moving ANY app to the ext2 partition. The native gingerbread app2sd doesn't support moving all apps to the SD card.
Any way of making link2sd work on GB 2.3.3?
can anyone confirm what's the current sdcard partition layout. also which partition is detected in phone.
i think i have an idea which might help up getting this to work.
anantshri said:
can anyone confirm what's the current sdcard partition layout. also which partition is detected in phone.
i think i have an idea which might help up getting this to work.
Click to expand...
Click to collapse
@Anant: My SD is setup as per the guidelines described here:
http://forum.xda-developers.com/showpost.php?p=10711328&postcount=1
I have a 8GB card and I have allocated 7.05 GB of FAT32 memory to the Data partition, and have allocated 0.5GB to the secondary partition. This partition was also setup as FAT32 since i had issues with EXT2.
*Edit: After the 2.3.3 update, the X10 now detects only the 2nd partition (480MB) instead of the data partition (7GB) - but when I plug into a PC, the data partition gets mounted correctly.
Hope that helped.
That is not good, it means that you cannot transfer data or programs between your PC and the 7GB partition... is there a way to fix this?
When you plug into pc, your data-partition mounts correctly, so you can copy your data to your pc as a backup.
I recommend using a adapter to connect the sd-card to your pc, formatting both partitions, and then put it back. I did it that way, be it that I removed my second partition and went back to one partition only, 8 Gb, and all works fine now.
I don't intend to use Link2SD anymore, because in 2.3.3 the system can apply data2sd itself, I learned, with or without Apps2SD.
Good luck, greetz,
kwarkje
From my observation, the 2.3.3 android system moves the appdata to the sdcard only in certain large apps (apps >7mb in size?) which is good if you have are dealing with huge apks like AngryBirds, but not too handy if you have a huge number of small apps all ~3MB in size.
BTW the native app2sd isn't compatible with all apps.
Use "Move2SD Enabler" from Market to allow moving any app to SD.
https://market.android.com/details?id=com.leinardi.setinstalllocation&hl=en
This didnt work with my 32GB SD card... it is now a single 32GB FAT32 partition. What type of format should I use? FAT? EXT2?
kwarkje said:
When you plug into pc, your data-partition mounts correctly, so you can copy your data to your pc as a backup.
I recommend using a adapter to connect the sd-card to your pc, formatting both partitions, and then put it back. I did it that way, be it that I removed my second partition and went back to one partition only, 8 Gb, and all works fine now.
I don't intend to use Link2SD anymore, because in 2.3.3 the system can apply data2sd itself, I learned, with or without Apps2SD.
Good luck, greetz,
kwarkje
Click to expand...
Click to collapse
@doomed151:
Thats what I was looking for! Good find!
This app has its own hitch though: the move2sd enabler needs lots of caution...some apps aren't supported, and moving them to the SD causes them to crash. There is no way of knowing which apps can be moved and which ones can't. I happened to move GT Racing HD to the SD and it stopped working. Had to reinstall!
anantshri said:
can anyone confirm what's the current sdcard partition layout. also which partition is detected in phone.
i think i have an idea which might help up getting this to work.
Click to expand...
Click to collapse
@Anatshri Any luck on this? I would prefer to use link2sd instead of the native move2sd in GB.
I tried a 16gb & a 4gb sd card but couldn't get it to work. I've also tried ext2, ext3 & ext4 as the 2nd partition but I don't think the stock kernel supports any of them. The sd becomes unreadable after a reboot but if I connect directly to the pc I can see both partitions.
If I make both fat32 partitions only the 2nd partition gets mounted. Do you think this is kernel related as well or can we modify the mounting scripts to correct this?
I am suffering from bad health conditions right now so can't work much however all I can see right now is if this is the case you can do two things
1) create a script that mounts partition 1 at /data/sd-ext coz link2 sd needs mounted partition at this location. I suppose init.d script could help us. However
2) the problem would be that recovery will detect only partiton one
Sent from my X10i using XDA App
anantshri said:
I am suffering from bad health conditions right now so can't work much however all I can see right now is if this is the case you can do two things
1) create a script that mounts partition 1 at /data/sd-ext coz link2 sd needs mounted partition at this location. I suppose init.d script could help us. However
2) the problem would be that recovery will detect only partiton one
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I'm sorry to hear about your health, hopefully it's nothing serious and you get well soon. Thanks for the suggestion, I'll give this a try when I get a chance.
Any solution on this?
I move from 2.2 to 2.3.4 and link2sd don't work anymore cannot mount the 2nd fat32 partition.
App2SD sucks because doesnt allow some apps to get moved.
Thanks
Lockon Stratos said:
I'm sorry to hear about your health, hopefully it's nothing serious and you get well soon. Thanks for the suggestion, I'll give this a try when I get a chance.
Click to expand...
Click to collapse
Thanks for the wishes.
I have extended weekend this time will try to give my old card a twist and see if i can get link2sd work again on my handset.
bbsrailfan said:
Link2SD gave the option of moving ANY app to the ext2 partition. The native gingerbread app2sd doesn't support moving all apps to the SD card.
Any way of making link2sd work on GB 2.3.3?
Click to expand...
Click to collapse
I agree with you and hope that we will have this possibility, I really miss link2sd, the best app ever to move apps to sd.
So, first of all, a big hello to the community! Spent the last 2 hours digging around the forum, as I'm a new user and I'm amazed with this big things Galaxy has to add! I came from a Symbyan platform, and the only thing I done was Flash my Nokia 5800 with a C6 FW by PHNT.
Few days ago, I moved to this awsome Android world, where I see alot fo stuff new to my eyes, and that I wish some replys from you guys.
You all gonna say this questions are answered elsewhere, but I digged the forum, and I find the most various kind of answers for the same questions, which I'm now pretty much confused.
The thing is, I want to apply this CM7.1(or , dunno which is better), from what I see, it improves greatly our Galaxy Ace, but on the other hand, I saw a post that says taht this is simple as Root(Which I've done already), and apply a CWM or something, and apply the CM7.1 same way as Rooting.
The fulcral questions is which is the safest(and noobier-frindly) way to apply that CM 7.1?
Also if someone can aid me, what CWM does exactly? Its a backup app like TitaniumBackup?
I think you did not read This my friend.
And CWM is a custom recovery which has a lot more features than stock recovery.
CWM5 can be found Here
The tutorial is at the first link I gave you. But if you didn't understand,
I'll tell you step-by-step
1. Download the rom and CWM and put it in your phone.
2. Enter recovery and choose install zip from SD then choose CWM.
3. Reboot and enter recovery again.
4. Your now in CWM Recovery, before flashing any rom, doa wipe data.
5. Choose install zip fom SD card and choose CM7.1/2
reboot then voila
Hited Thanks for you!
Really helpfull thread! How did I missed it lol!
So the thing taht really caught my attention was the option to don't waste internal memory, which is exactly the only reason I wanted to Cyan Mod.
If it's not a hassle to you, can you pinpoint me the EXACT file to run from CWM? I really don't wanna mess up my phone(though I will only apply it after I buy my 16GB SDcard soon).
Here's where I stand:
1-> I rooted my device with some root I found over youtube, worked fine, then google play said me to update the superuser app, so I did. I guess it's updated, no problems there.
2-> Now I need CWM(I got a file named "recovery-clockwork-5.0.2.6-galaxyace-fix.zip", should I use that one or try to find the v4 one?
3-> Then I need to run on Home Button+Power to install that mod, but here comes 4 questions:
"You need to extend the internal app storage to the sd card. The FIRST thing you need to do is go back to Clockworkmod recovery mode and partition your sdcard so that it has a ext4 extension. Then update from ketut.kumajaya's post with cf-rootdtapps2sd???.zip(forgot the full name). That defaults all downloaded apps to run from the sd card."
3.1-> Does CWM have the partition option already? And does it formats the SDcard?
3.2-> Can u direct me the EXACT file so I don't mess this up?
3.3-> This doesn't wipes any data from the phone right?
3.3.3-> And what about the apps alraedy installed and using the internal memory even though they are "in SD card, as phone shows", i need to reinstall them right?
Ty again for any hassle done! And I will thank you agani, just for wasting the time here with me
2. Ok flash that. Some roms are compatible with that but not on v4
3. No. Don't use CFRoot. It's for stock roms only.
3.1 Yes, you can partitition SD card on CWM.
And yes, it wipes everything in your SD
and after you have partitioned it, download Link2sd from the market, choose ext4 then link every app (except system apps of course)
I guess that answers all, just didn't get what u meant by that, do i use taht version 5 or the v4 of CWM? And what is a stock rom? I never changed nothing on my phone except the Rooting.
NunoPitbull said:
I guess that answers all, just didn't get what u meant by that, do i use taht version 5 or the v4 of CWM? And what is a stock rom? I never changed nothing on my phone except the Rooting.
Click to expand...
Click to collapse
stock roms are roms made by samsung. Your currently in a stock rom but you are going to CM7 so don't use it anymore. Use v5
Wait, can't I have that Mod to save all in SDcard and save internt memory? I just want that thing, I dont have Cyan mod if I can do that without it
Can u pinpoint me to the correct file please?
NunoPitbull said:
Wait, can't I have that Mod to save all in SDcard and save internt memory? I just want that thing, I dont have Cyan mod if I can do that without it
Can u pinpoint me to the correct file please?
Click to expand...
Click to collapse
After you partition your sd card thorough cwm recovery, do a factory reset and then install cm7.2. Then you can use either s2e or link2sd or a2sd to free up your internal memory.
If you are asking for exact cm7.2 file, there are many of them. Try cm7.2 by vo1 first. Thread will be in development section created by Lovetz.
It seems your not really getting what I mean
First I wanted the CM7 mod, BUT after reading that thread you showed me, I saw its possible to free up internal memory WITHOUT the need of installing CM7, and installing that other file right?
I just wanted to know which is the right file so I don't mess up. I just want to have the option to save all to SDcard, and not to use Internal memory. That was the reason I wanted CM7. Understand now?
use minitool partition wizard to repartition your sdcard. create two partition, both as primary, first partition as fat32 and second partition as ext2/ext3/ext4
http://www.partitionwizard.com/free-partition-manager.html
then flash this from clockworkmod recovery. before flashing do mount system and data manually
http://forum.xda-developers.com/showthread.php?t=715940
then install this
https://play.google.com/store/apps/details?id=com.elgubbo.a2sdGUI&hl=en
NunoPitbull said:
It seems your not really getting what I mean
First I wanted the CM7 mod, BUT after reading that thread you showed me, I saw its possible to free up internal memory WITHOUT the need of installing CM7, and installing that other file right?
I just wanted to know which is the right file so I don't mess up. I just want to have the option to save all to SDcard, and not to use Internal memory. That was the reason I wanted CM7. Understand now?
Click to expand...
Click to collapse
I FULLY understand what you want And I am telling you that you do not need those files to transfer apps to sd. ust partition your SD via CWM, doanload Link2sd choose ext4 then link all of them
an0nym0us_ said:
use minitool partition wizard to repartition your sdcard. create two partition, both as primary, first partition as fat32 and second partition as ext2/ext3/ext4
http://www.partitionwizard.com/free-partition-manager.html
then flash this from clockworkmod recovery. before flashing do mount system and data manually
http://forum.xda-developers.com/showthread.php?t=715940
then install this
https://play.google.com/store/apps/details?id=com.elgubbo.a2sdGUI&hl=en
Click to expand...
Click to collapse
Doo:DAce said:
I FULLY understand what you want And I am telling you that you do not need those files to transfer apps to sd. ust partition your SD via CWM, doanload Link2sd choose ext4 then link all of them
Click to expand...
Click to collapse
See what I mean? One guy tells me totally different apps to download + a PC program and to flash another app then you say, and you say with only 1 app + the Link2SD I can do it That's why I get confused ;p I guess both apps are good, which one the safest and best?
Doo:DAce said:
I FULLY understand what you want And I am telling you that you do not need those files to transfer apps to sd. ust partition your SD via CWM, doanload Link2sd choose ext4 then link all of them
Click to expand...
Click to collapse
So it's only that? No need for that "update from ketut.kumajaya's post with cf-rootdtapps2sd???.zip(forgot the full name)" zip?
Also which CWM I use, v4 or the one I have?("recovery-clockwork-5.0.2.6-galaxyace-fix")
Lol they are many ways to partition your SD card ...cwm recovery eliminates the need of a PC but Mini tool partition wizard is recommended ( though I trust cwm recovery blindly )
Dragonoid said:
Lol they are many ways to partition your SD card ...cwm recovery eliminates the need of a PC but Mini tool partition wizard is recommended ( though I trust cwm recovery blindly )
Click to expand...
Click to collapse
Can you tell me how is it partitioned?
First partition will be for photos etc, the 2nd will be for apps?
Can you pinpoint me the .apk file for CWM you use?
Also, what should I expect when doing the partition trought CMW? Its just an option saying to do the partition? I read taht is needed to mount/unmount things,I have NO IDEA on how to achieve that.
If u got access to pc, better do it on pc with minitool after making backup of your whole sdcard. Yes cwm can do it but who know when disaster strike u'll lose all your sdcard data. Better to be safe than sorry mate.
NunoPitbull said:
Can you tell me how is it partitioned?
First partition will be for photos etc, the 2nd will be for apps?
Can you pinpoint me the .apk file for CWM you use?
Also, what should I expect when doing the partition trought CMW? Its just an option saying to do the partition? I read taht is needed to mount/unmount things,I have NO IDEA on how to achieve that.
Click to expand...
Click to collapse
Well cwm 5 can be found by Googling ( cwm 5 for Samsung galaxy ace)
2. It's not how you think ..once you partition your SD card the partition is inaccessible to you ..example if on a 2 gb card if u create a partition of 512mb when u go to settings the phone will read your SD card as 1.5 gb
3. Cwm guides are readily available on you tube
4. As the other guys have said b4 u need to use apps like link2sd to be able to use the partition ..entirely for apps alone ...s2e is the best but works ONLY on cm7
5. During the partition process your SD card will be formatted !!!
Backup your Data first! !!!!
6. Anything else???
P.S. I can't provide links as I m on my phone and even on a PC I would have advised u to Google
So, in your example, on a 2GB card, the phone will read only 1,5GB, so what will be that 1,5GB for? And the 512MB what will they be for?
Thanks for the reply
NunoPitbull said:
So, in your example, on a 2GB card, the phone will read only 1,5GB, so what will be that 1,5GB for? And the 512MB what will they be for?
Thanks for the reply
Click to expand...
Click to collapse
1.5 gb will be for your media -photos videos files etc that 512 MB is accessible only through s2e,link2sd and other such apps( u see I know only these 2 ) this 512 MB can be used to store your apps ---I.e. move the dalvik cache to the SD card which in turn results in a lot of free internal space....
Once upon a time I had 120 apps on my phone and 50 MB was still remaining.
P.S. please don't ask what dalvik cache is ...Google it instead ..ull get better info
Dragonoid said:
1.5 gb will be for your media -photos videos files etc that 512 MB is accessible only through s2e,link2sd and other such apps( u see I know only these 2 ) this 512 MB can be used to store your apps ---I.e. move the dalvik cache to the SD card which in turn results in a lot of free internal space....
Once upon a time I had 120 apps on my phone and 50 MB was still remaining.
P.S. please don't ask what dalvik cache is ...Google it instead ..ull get better info
Click to expand...
Click to collapse
So u still loose internal space even after this patchs?
Hello all. I am new to the forums and to Android, so bear with me.
I have been searching around for the past few days for a way to solve the issue that I am having and have not been able to find anything that works for me. So here it is:
I have an LG Optimus L5 II (LG-E450B) running stock Android 4.1.2 (non-rooted) Kernel Version 3.4.0. My carrier is Virgin Mobile (Canada). I recently realized that the stock 2GB of internal memory is not nearly enough for me, so I went out and bought a 16GB Sandisk microSD card. I put music on it, set photos to autosave on it, etc. which all worked great. However, I have been unable to get some apps to move over correctly.
I realize that some apps can't really get moved (at least without rooting, etc). The app I am specifically trying to work with is iBird pro. It's App Info appears as such:
Total: 641 MB
App: 12.68 MB
USB storage app: 628 MB
Data: 4.00 KB
SD Card: 0.00B
The "Move to SD Card" option is available, but when I do it all that it does is drop the App to 3.51MB and up the USB storage app to 637MB. All of which stays on the internal memory. Obviously it is only moving 9MB or so of App to the virtual SD internal memory (which I believe is what shows up in my files manager as /storage/sdcard0, so it doesn't actually move it to the SD card (though a few other apps have sucessfully been moved).
I have tried using App2SD, but it says that the program is not supported by my device (and the iBird Pro shows up as "Phone Only" anyway).
I have tried the ADB hack trick set-install-location 2 and reinstalled the app and still nothing, it just saved on the internal memory.
Finally, when I open the app, it also downloads another ~600MB of database data (bird songs, pictures, etc), which also saves on the internal memory. Or at least tries to but the memory gets full and it stops the download.
Anyone have any ideas for me? I know a lot of people ask this question, but none of the other solutions I came across seemed to help me. I would really appreciate it! I would prefer not to root my phone, by the way. Unless of course someone can make me an incredibly convincing argument.
Cheers!
This is how android's built-in app2sd works.
I don't think you can do anything w/o root.
I suggest rooting, make a second partition to your SD card (2-4 GB) and use link2sd.
Sent from my GT-I5500 [CM7.2]
There are oh so many reasons to root your phone and few not but that choice is yours
Sounds like only some of the data/libraries are able to me to SD on this app of yours so if you don't want to root it than you'll have to leave it on internal.
And FYI, many apps don't play well or are slowed considerably on SD, so be careful what you move and if you don't Yardley use an app its best to just not even download it, but again choice is yours
Sent from my Nexus 4 using Tapatalk 2
if you can't do root so sit back and relax.
Ok, so I decided to root. Which was actually freakishly easy. So how do I move stuff now? I have tried a number of apps, all of which only bring up "App Options" and we have determined that the "Move to SD" option there doesn't work correctly. I just want to figure out how to get the app and all of the data that it will download later to install on the SD, I never thought it would be quite this complicated.
Benjiboy180 said:
Ok, so I decided to root. Which was actually freakishly easy. So how do I move stuff now? I have tried a number of apps, all of which only bring up "App Options" and we have determined that the "Move to SD" option there doesn't work correctly. I just want to figure out how to get the app and all of the data that it will download later to install on the SD, I never thought it would be quite this complicated.
Click to expand...
Click to collapse
Use Link2SD.
Make a second partition (2-4 GB) and move (link) that app to the second partition.
Sent from my GT-I5500 [CM7.2]
Tried Link2Sd? I would rather use that.
Sent from my A89 using xda app-developers app
Ok, so I partitioned my 16GB card into two FAT32 partitions (10 GB and 4 GB) and a Swap Partition of ~850MB (roughly following this guide: http://forum.xda-developers.com/showthread.php?t=2126363). However, when I opened Link2SD and tried to select FAT32/FAT16 as the file system of the SD card's second partition it came up with the Mount Script Error "Mount script cannot be created. mount: I/O error". I had tried formatting with Ext4 and Ext2 file systems as well earlier, but when I selected either it said ext2 or ext4 (whichever I was trying to use) was not supported by my device (which I am assuming means my kernel does not support either).
Edit: Ok, so I changed it. I deleted the Swap partition (couldn't get the swap stuff to work anyway, it's not required right?). There is now 1 10GB partition and 1 5GB partition. Link2SD created the mount link just fine this time. Testing it out. "Install Location" gives a Warning "App2SD is not supported by your device. Because your device has a primary external storage which is emulated from the internal storage. You can link the app in order to move its files to your SD card." Does this mean that I can't automatically link files to the SD card?
Benjiboy180 said:
Ok, so I partitioned my 16GB card into two FAT32 partitions (10 GB and 4 GB) and a Swap Partition of ~850MB (roughly following this guide: http://forum.xda-developers.com/showthread.php?t=2126363). However, when I opened Link2SD and tried to select FAT32/FAT16 as the file system of the SD card's second partition it came up with the Mount Script Error "Mount script cannot be created. mount: I/O error". I had tried formatting with Ext4 and Ext2 file systems as well earlier, but when I selected either it said ext2 or ext4 (whichever I was trying to use) was not supported by my device (which I am assuming means my kernel does not support either).
Edit: Ok, so I changed it. I deleted the Swap partition (couldn't get the swap stuff to work anyway, it's not required right?). There is now 1 10GB partition and 1 5GB partition. Link2SD created the mount link just fine this time. Testing it out. "Install Location" gives a Warning "App2SD is not supported by your device. Because your device has a primary external storage which is emulated from the internal storage. You can link the app in order to move its files to your SD card." Does this mean that I can't automatically link files to the SD card?
Click to expand...
Click to collapse
Swap IS NOT needed.
Second partition should be ext 2/3/4.
Test to see if auto-link works.
Sent from my GT-I5500 [CM7.2]
Vagelis1608 said:
Swap IS NOT needed.
Second partition should be ext 2/3/4.
Test to see if auto-link works.
Sent from my GT-I5500 [CM7.2]
Click to expand...
Click to collapse
Good to know swap isn't needed. However, Link2SD did keep saying that Ext2 or Ext4 wasn't supported. I can try it again though.
Benjiboy180 said:
Good to know swap isn't needed. However, Link2SD did keep saying that Ext2 or Ext4 wasn't supported. I can try it again though.
Click to expand...
Click to collapse
Use Ext3. If it doesn't work use FAT. It can get buggy (not very often).
Also I think that if you can link apps 1 by 1, then you can (probably) use auto-link as well.
Sent from my GT-I5500 [CM7.2]
Vagelis1608 said:
Use Ext3. If it doesn't work use FAT. It can get buggy (not very often).
Also I think that if you can link apps 1 by 1, then you can (probably) use auto-link as well.
Sent from my GT-I5500 [CM7.2]
Click to expand...
Click to collapse
Ok, so Ext3 didn't work. So I stuck with the second partition being FAT32 as well. The mount worked fine.
When I try to create the link I get the following error: "Failure. create_link.com.whatbird.pro[1]: can't create /data/sdext2/data/com. whatbird.pro/lib/libfileutils.so: I/O error"
I was able to move the bulk of the apps Obb files to the SD using FolderMount. However, I am unsure how to move the 650MB Misc. data files to the SD.
Benjiboy180 said:
Ok, so Ext3 didn't work. So I stuck with the second partition being FAT32 as well. The mount worked fine.
When I try to create the link I get the following error: "Failure. create_link.com.whatbird.pro[1]: can't create /data/sdext2/data/com. whatbird.pro/lib/libfileutils.so: I/O error"
I was able to move the bulk of the apps Obb files to the SD using FolderMount. However, I am unsure how to move the 650MB Misc. data files to the SD.
Click to expand...
Click to collapse
Flash CWM recovery, in 'mounts and storage' press 'format SD-Ext'. This fixes the I/O error (I think).
If the misc files are libs then ALL of them can be moved/linked.
Sent from my GT-I5500 [CM7.2]
Vagelis1608 said:
Flash CWM recovery, in 'mounts and storage' press 'format SD-Ext'. This fixes the I/O error (I think).
If the misc files are libs then ALL of them can be moved/linked.
Sent from my GT-I5500 [CM7.2]
Click to expand...
Click to collapse
ROM Manager does not list the LG- E450B as a device supported by CWM Recovery so it won't to an install of CWM Recovery,
Benjiboy180 said:
ROM Manager does not list the LG- E450B as a device supported by CWM Recovery so it won't to an install of CWM Recovery,
Click to expand...
Click to collapse
Look for a custom build here on XDA.
Sent from my GT-I5500 [CM7.2]