[SOLVED] Help me Please...with Partitioning and installing A2SD - Optimus One, P500, V General

Hi everyone,
First of all i would like to thank the developers over here doing a wonderful job,
Ok so this is what i have at the moment:
clockwork recovery installed
Flashed Neojn's devoid #froyo final ROM
franco's kernel v17
now i've followed the guides over here on partitioning and installing, but seem to be doing wrong some where..
Ok on to the questons:
1)Is this Partitioning and darktremor's A2SD flashing to be done before or after install of ROM, i did it after ROM install
2) In Clockwork... there is only an option to create partition but i don't find any option to select the format like ext 2 or ext 3 or ext 4... why is this..?
3) Ok After flashing Darktremor's A2SD (by selecting install zip from location)... i don't see any app icon related to it, how can i know that its working..
4) I went to application manager and checked my previously installed applications, they all have move to sd card greyed out, is it still on phone memory or on the ext partition..
5) i checked by installing a new apk which normally installs in phone memory.. i checked it in application manager.. it too had "move to SD card greyed out" did this app install in ext or phone memory..?
6) I have not been able to locate ext partition in root explorer.. where should be it located, although my memory card size seems to have been reduced after the partition...?
7) How can i transfer dalvich cache to ext partition, should i type in the commands after installing the emulator...
Sorry but i don't seem to get it..

1. First partition, then rom, then a2sd
2. Clockwork only creates ext4 partition
3. From adb or terminal emulator type su, then 'a2sd check' , and it will show you the status.
4. After installing a2sd, the phone treats the ext partition as internal memory (in other words it is tricked) and by default all apps get installed to this partition.
5. So all apps will show that they have installed in phone memory but they are in ext parition. You can check if this is activated by using a2sd check or if you want to check for yourself, navigate to /system/sd (froyo) or /sd-ext (GB) through root explorer and you will see the apps installed there.
6. And obviously, if you have 2 gb card, inherently it is not 2 gb but 1.7 GB, and then if you create a paritition of 512 MB and then if you check in settings it will show sd card space 1.7 - 0.5 = 1.2 GB.
7. To transfer dalvik to ext partition type via terminal or adb, su, then 'a2sd cachesd'. The phone will reboot.
For more commands in a2sd, type 'a2sd help' (after giving su permissions of course) .

If u dont want typing ,download a2sdgui from market and check if its installed it will show details ,otherwise automatic close ,you can check if apps are installed in internal or ext ,and can also move dalvik to ext through this app.
So give it a try ,if u facing any problems then u can pm me.
Sent from my LG-P500 using XDA Premium App

mihir287 said:
1. First partition, then rom, then a2sd
2. Clockwork only creates ext4 partition
3. From adb or terminal emulator type su, then 'a2sd check' , and it will show you the status.
4. After installing a2sd, the phone treats the ext partition as internal memory (in other words it is tricked) and by default all apps get installed to this partition.
5. So all apps will show that they have installed in phone memory but they are in ext parition. You can check if this is activated by using a2sd check or if you want to check for yourself, navigate to /system/sd (froyo) or /sd-ext (GB) through root explorer and you will see the apps installed there.
6. And obviously, if you have 2 gb card, inherently it is not 2 gb but 1.7 GB, and then if you create a paritition of 512 MB and then if you check in settings it will show sd card space 1.7 - 0.5 = 1.2 GB.
7. To transfer dalvik to ext partition type via terminal or adb, su, then 'a2sd cachesd'. The phone will reboot.
For more commands in a2sd, type 'a2sd help' (after giving su permissions of course) .
Click to expand...
Click to collapse
Thanked You, for the details provided.. will check out and post my findings
Nimitmak said:
If u dont want typing ,download a2sdgui from market and check if its installed it will show details ,otherwise automatic close ,you can check if apps are installed in internal or ext ,and can also move dalvik to ext through this app.
So give it a try ,if u facing any problems then u can pm me.
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
Thanks mate, i'll download it from market and post my findings here...

You're welcome I forgot a2sdgui, because i prefer the commands, get it from market, it will provide a GUI to those commands.

OK mates
I have located the ext partition using root explorer in system/sd, really i am relieved now, thank GOD
I ran A2SDgui, it started, i have the led on for "Apps are on SD button", however its off for "zipalign on boot" and "swap is deactivated" anyone knows what they do?
Whats the low memory tab for ?, by default its set to "strict low memory settings"
Under system info - general info
I have got SD-ext using some space, this shows its working i suppose, and whats the /cache/ i have total of 64mb and 63mb is free, what does that do?
And Suppose if i want say for a widget to be on phone memory, how do i turn off this feature just for that ?
One final question, Where does clock work recovery mod actually live in phone, is it possible that we can delete it and brick our phone, i always thought that flashing a new rom wipes everything on phone including clockwork, but i am wrong i suppose...
Sorry for my never ending questions .. but i am curious
Finally i am free from that dreaded low memory message, thanks to people over here

Don't touch the zipalign, swap and low memory settings unless you know what you are doing.
The recovery resides on a separate mount-point ( separate partition if you will) and flashing a rom does not erase it.
Unfortunately, with DT a2sd you cannot selectively choose which apps should be on internal or on ext partition. For that check out Link2sd on the market. It will allow you choose which apps to put on ext and which on internal. Keep in mind, if you want to use link2sd then it's best to use it on a fresh flash as a2sd and ink2sd don't work together.
The cache partition is another partition which stores cache files and as a temporary download location. Don't worry about it.
Sent from my LG-P500 using XDA App

mihir287 said:
Don't touch the zipalign, swap and low memory settings unless you know what you are doing.
The recovery resides on a separate mount-point ( separate partition if you will) and flashing a rom does not erase it.
Unfortunately, with DT a2sd you cannot selectively choose which apps should be on internal or on ext partition. For that check out Link2sd on the market. It will allow you choose which apps to put on ext and which on internal. Keep in mind, if you want to use link2sd then it's best to use it on a fresh flash as a2sd and ink2sd don't work together.
The cache partition is another partition which stores cache files and as a temporary download location. Don't worry about it.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Thanks a ton bro. I have decided to stay with A2SD for now. will move to link 2 SD when a Rom based on the official gingerbread becomes available. BTW do you have any links that explain link2sd in detail..

CtrlU said:
Thanks a ton bro. I have decided to stay with A2SD for now. will move to link 2 SD when a Rom based on the official gingerbread becomes available. BTW do you have any links that explain link2sd in detail..
Click to expand...
Click to collapse
Oh, I don't know; see the market description, or as always, google is your friend!

This thread answered a lot of my doubts about the partitioning. However, i did not understand if the card should be partitioned after or before the install of the ROM? Will there be a problem if it is done after because I am getting a 16GB card tomorrow but I've already flashed a custom ROM using the 2GB stock lg card? Or should i re-do everything again to be safe?

Sparkyte said:
This thread answered a lot of my doubts about the partitioning. However, i did not understand if the card should be partitioned after or before the install of the ROM? Will there be a problem if it is done after because I am getting a 16GB card tomorrow but I've already flashed a custom ROM using the 2GB stock lg card? Or should i re-do everything again to be safe?
Click to expand...
Click to collapse
for your first question, it should be partitioned BEFORE you flash the rom and other stuffs
also dont forget to read the pink words in my signiture
and for card changing, its simple:
first make a nandroid backup, choose all stuffs including ext-partition
then partition your new card (better the same size as before idk just feeling better with that)
nandroid full restore.
and reboot then all things will be cool dont have to redo stuffs
but for the worst situations better make a full titanium before changing the card!
good luck and hope i helped

Related

low space with a2sd?

Hi,
I'm getting low on space message on my hero running VillainRom 6.1. Tried rebooting, still there. I've only tried to install one or 2 apps with the message there, so not sure if thats actually been affected.
settings-->sdcard & phone storage-->internal storage shows 14.83mb
quick system info shows:
sd card storage free 2.14gb
a2sd storage 249mb free (total 457mb)
system cache 129mb free
memory 37.35mb free
there doesn't seem to be any more processes running than usual - only around 3-4.
I do have quite a lot of apps, over 100, probably closer to 200, I havent counted.
btw thanks to everyone on this site, I'm new to flashing roms but having fun learning, and my phones definitely got a new lease of life.
use the apps2sd checker to make sure its working. If it is id say increase your partition from 512 to more
Just because the app is installed on the sd card (assuming its working properly) doesn't mean the davilk cache for the app has moved. unless you move this as well (which isn't really recommended) each time you install an app system memory will still go down a little.
Lennyuk said:
Just because the app is installed on the sd card (assuming its working properly) doesn't mean the davilk cache for the app has moved. unless you move this as well (which isn't really recommended) each time you install an app system memory will still go down a little.
Click to expand...
Click to collapse
http://4943922026776299669-a-180274...lcSrZUn2-7KkHiRo-ew0R2SEebAQ==&attredirects=0
u need this which is an update. copy this file into the root of the memory card and through the recovery image install it from "zip file from sdcard"
after that restart the phone and check your memory is should be 120mb
Indy_Hero said:
use the apps2sd checker to make sure its working. If it is id say increase your partition from 512 to more
Click to expand...
Click to collapse
thanks for the suggestion
a2sd check script says its working fine, also checked via adb shell.
This is what I then did to the partition size:
I copied SD card contents (both partitions) into ubuntu.
then I put SD back into phone and repartitioned using 1gb for ext2
then I copied back SD card contents from ubuntu.
I assumed this would work, but when I booted I was getting FC all the time. Bart backup sorted it out but I am still left wondering why this method of increasing partition size didnt work??
In any case quick system info shows a2sd has more space, but still got low space message.
qasi said:
...
u need this which is an update. copy this file into the root of the memory card and through the recovery image install it from "zip file from sdcard"
after that restart the phone and check your memory is should be 120mb
Click to expand...
Click to collapse
seems to have solved the problem!! thanks alot mate.
would you by any chance out of interest know why copying ext2 contents from sdcard as outlined above didnt work? - may have some future relevance if changing/upgrading roms.
Thanks again
neuro_99 said:
thanks for the suggestion
a2sd check script says its working fine, also checked via adb shell.
This is what I then did to the partition size:
I copied SD card contents (both partitions) into ubuntu.
then I put SD back into phone and repartitioned using 1gb for ext2
then I copied back SD card contents from ubuntu.
I assumed this would work, but when I booted I was getting FC all the time. Bart backup sorted it out but I am still left wondering why this method of increasing partition size didnt work??
In any case quick system info shows a2sd has more space, but still got low space message.
seems to have solved the problem!! thanks alot mate.
would you by any chance out of interest know why copying ext2 contents from sdcard as outlined above didnt work? - may have some future relevance if changing/upgrading roms.
Thanks again
Click to expand...
Click to collapse
this is because the ramon recovery image had been linked with ext2 with a 512mb partition and u selected 1gb. im not quite sure about that.
chnagin rom is quite simple beucase you have to is
1.backup using nandroid
2.make sure you wipe everything. (also battery and rotating settings)
3. Re partition your sdcard to hold 1 ext2 partition and last partition should be the rest in fat32
4. Flash the rom you want through "zip file from sd card"
5. Reboot.
im a newb so i dont have much knowledge but patching up problems that i had, so that i can help others.
it can be pain especailly rooting!!!
So thats how you would flash a rom, but what if you wanted to keep your a2sd apps? So you dont have to install them all over again in the new rom when you wiped everything.
I think I read somewhere that it should be possible to leave the contents of ext2 as it is, and that should carry forward to the next rom, but I havent been able to test it myself yet.

[Solved] Memory shortage

Hi,
I am new here and did my best searching but couldn;t find a conclusive answer so i just need some suggestions about a way forward.
So far using Froyo's move to SD implementation I have managed to gain some space on the phone for more apps but i am still running out. I also have to use the slow Apps 2 SD application.
So my problem is I want more space for apps. Using adb, setting the install location to SD card helps provide some more but i have hit that limit too.
So, from what i've read so far, there is another symbolic link based method, that creates a partition on the SD card and then the phone appears to think its still on the phone.
I have a stock ROM and would prefer not having a custom ROM for now. What would be the suggested way of getting Apps2sdext functionality? I mean like installing a package after rooting.
I have read about rooting, and apps2sdext also seems to need root. But i'd really appreciate if somebody could drop some links as to what I could do. Here are my thoughts of what they might be:
Root phone
Format SD card with partitions
Install a2sd
Another question: is there no way of using Gparted, etc to resize partitions and create the ext4 partition on pc? As in before taking it to the phone? that way no need to reinstall some apps.
Ok so for now I see I can use Z4Root to root my phone. So i've sorted that part out.
I also saw on DarkTremor apps2sd page that stock roms need a custom init.rc. Where are the instructions for that?
gontadu said:
Another question: is there no way of using Gparted, etc to resize partitions and create the ext4 partition on pc? As in before taking it to the phone? that way no need to reinstall some apps.
Click to expand...
Click to collapse
I'm not quite sure. I'm not an A2SD user. But, here are my hunches/ideas/opinions:
I suggest you partition with the partitioner in the recovery image. A2SD may have trouble finding the ext partition when the layout is quite different from what it expects, though I'm not quite sure.
As for not having to reinstall apps, this is what I did prior to installing A2SD:
Move all apps to phone memory
Backup
Partition SD
Flash A2SD
Install A2SD (yes, I had to manually launch a2sd scripts --')
Done
Works as intended, but I've found that there wasn't a significant increase in free phone memory storage, but I'm very sure a2sd was applied.
So I went back to native A2SD.
Which leads me to say: I suggest flashing a custom ROM with A2SD integrated
Idk, maybe I just didn't give A2SD some time. Just try it out.
Hmmm interesting! Still digging up more info as i go along...
Ok so far I installed, z4root and it installs fine and does the whole root and restart thing.
Now when i browse from adb shell i still get the $ prompt and not the # prompt. But when i go into z4root it provides options for re-root and un-root...
UPDATE: well i found out that once the shell opens as $, you type su. When you do that look at your phone and accept the superuser request, otherwise permission denied appears on the pc screen. now i have the # prompt!!!
UPDATE: Got Clockworkmod running now! and exploring a2sd... i give up. cannot find a concise thing that says here's the script that you use after doing the clockworkmod. what do i do???
Hi,I came from megatron rom and is using CM7 rom now.Not sure partitioning of sd card work on stock rom but you can try.
Disclaimer: I'm not responsible for anything that happens to your phone! Below is what I did.
Instructions: Download DarkTremor Apps2sd.zip file.
Then,Backup all your sd card contents on your PC.You MUST backup as partitioning of sd card will wipe the whole sd card.
Reboot in recovery and select partition sd card > Partition sd card again> Swap Size:Choose 0 (I'm not sure what the other numbers will do.) > Then 512mb for the next option.Then it will start partitioning. > After you're done,upgrade ext.2 to ext.3 > Then upgrade ext.3 to ext.4 > After that,connect usb or take out sd card and put DarkTremor apps2sd.zip file in the root of your sd card and then flash it!
DONE AND PROFIT!
Your internal storage should decrease very slowly because your apps are now 'tricked' into being installed on your sd card Hope this helps!
Sorted my problem out!!
Gonna post details asap! So excited
gontadu said:
Sorted my problem out!!
Gonna post details asap! So excited
Click to expand...
Click to collapse
So you did my method or what?
Nope actually not. Found a simpler method that's easier for noobs.
So here goes in very short since I don't have links
1. Split memory card into two partitions. I used 1GB. I did the partitioning on Ubuntu as it was much easier to just resize the partition using gparted. I am not sure what file systems are supported for the apps but i used ext3 for the 1GB. Backup should not be necessary but you are welcome to be careful
2. Root phone with z4root, very straightforward process
3. Install Link2SD from Android Market.
4. Once its installed, it'll prob ask for root permissions. Grant them.
5. Open Link2SD and in the list, one by one for each app you'd like to move, select and it opens a page with some details. Just click on create link, and in the next page an option for moving cache also shows. Select that too. Then the app gets moved in the background and slowly your space starts increasing.
6. I did not move any preinstalled apps that came with the phone. Just moving the apps I installed gave me plenty of space not to worry with App 2 SD (froyo method) or anything. Also with this method, mounting for USB Mass Storage also gets quicker.
What's there not to line?
Always do a nandroid backup! I didn't as i didn't think much of an app.. my phone went into continued android logo loop. After several tries of battery pull,I managed to get into the phone but many of my apps went missing.. sighz...
Running Stock rom
Sent from my LG-P500 using XDA App
yanuk said:
Always do a nandroid backup! I didn't as i didn't think much of an app.. my phone went into continued android logo loop. After several tries of battery pull,I managed to get into the phone but many of my apps went missing.. sighz...
Running Stock rom
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
You mean the backup option that is there in clockwork mod recovery menu right? I screwed up the files once and the backup came in real handy!
Sent from my LG-P500 using XDA App
It may not help you but I was using megatron rom froyo 2.2 and had barley any memory space on my phone and since I flashed CM7 rom from milk I have tons of space I have twice as many as many apps and stol 100 megabits left
Sent from my LG-P500 using XDA Premium App
Just curious, on a scale of 10 how hard is it to get cm7 onto your optimistic? And any clue whether existing settings are lost? Any other benefits? And features missing? It would be nice if we either got more battery life or better performance if not both
Sent from my LG-P500 using XDA App
I use a stock ROM (2.2.1) and I have rooted and installed "Move2SD Enabler" from the market and moved all the apps to SD (except for widgets) in the plain simple old fashion. I currently have over 150 apps installed with about 90MBytes of internal memory free.

Low storage....any advice?

Hi developers, I am having an issue with my device's storage. I have a rooted legend running blayo's B.0.8.4 rom and from what I know, this rom has free 80-90 mb of internal storage of application. But it wasn't enough even though I have an external 16GB SD card as not all apps are movable to my SD thus make it a little disappointing. So my question is that are there any solutions on how should expanding my phone's internal storage? Tks!
Sent from my HTC Legend using XDA App
bryanqjx said:
Hi developers, I am having an issue with my device's storage. I have a rooted legend running blayo's B.0.8.4 rom and from what I know, this rom has free 80-90 mb of internal storage of application. But it wasn't enough even though I have an external 16GB SD card as not all apps are movable to my SD thus make it a little disappointing. So my question is that are there any solutions on how should expanding my phone's internal storage? Tks!
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
You can use A2SD (build in)
-All you have to do is BACKUP your sd-card to your PC (all content will be deleted)
-In ROM manager select partion sd card and the size you use is up to you (512mb is more then enough no?)
-Your phone will reboot in clockworkmod automatically partion your sd card and reboots your phone
-Once its back fully booted download an app called terminal emulator (it's free) open that and type in; a2sd --enable
-Then reboot and its done
And if you see it worked you can transfer your sd content back
Hitmax117 said:
You can use A2SD (build in)
-All you have to do is BACKUP your sd-card to your phone (all content will be deleted)
-In ROM manager select partion sd card and the size you use is up to you (512mb is more then enough no?)
-Your phone will reboot in clockworkmod automatically partion your sd card and reboots your phone
-Once its back fully booted download an app called terminal emulator (it's free) open that and type in; a2sd --enable
-Then reboot and its done
And if you see it worked you can transfer your sd content back
Click to expand...
Click to collapse
Thanks for this quick tutorial. I needed this as well. BTW I assume you meant "...to your computer"?
I'm not sure if it works on all ROMs, but you can move an app to SD forcefully by long-pressing it in Titanium Backup, similar to how CM7 allows any Market or sideloaded app to be moved to the external storage.
I've always done this because I've been incredibly lazy to move my SD back and forth, and finally partition it due to some other technological limits that exist in my household.
Hitmax117 said:
You can use A2SD (build in)
-All you have to do is BACKUP your sd-card to your phone (all content will be deleted)
-In ROM manager select partion sd card and the size you use is up to you (512mb is more then enough no?)
-Your phone will reboot in clockworkmod automatically partion your sd card and reboots your phone
-Once its back fully booted download an app called terminal emulator (it's free) open that and type in; a2sd --enable
-Then reboot and its done
And if you see it worked you can transfer your sd content back
Click to expand...
Click to collapse
Ok so after doing this, what does it benefit, I can move any apps to my SD card?
Nidzge said:
Thanks for this quick tutorial. I needed this as well. BTW I assume you meant "...to your computer"?
Click to expand...
Click to collapse
Yes, to your PC my mistake ;p
bryanqjx said:
Ok so after doing this, what does it benefit, I can move any apps to my SD card?
Click to expand...
Click to collapse
Since Froyo (2.2) you can move apps to your sd-card BUT it will only work for apps that support that and it can never completly move the app to your sd card because a little bit of data stays on your internal phone memory
Now if you use the method I explained before (work only on Blayo's latest rom's, for other roms there are other tutorials) It will move ALL the aplications on your phone to the sd-card (even the system apps) so the advantage of that is that there is waayy more space on your phone internal storage and you can install a lot more apps since you are using your sd-card to store the apps
Hope that clarify's a few things for you
Ok TKS! I am gonna try it out!! So basically this is what I type in the terminal emulator right?
a2sd --enable
bryanqjx said:
Ok TKS! I am gonna try it out!! So basically this is what I type in the terminal emulator right?
a2sd --enable
Click to expand...
Click to collapse
np
and yes, but first you have to backup content and use rom manager to create partition like I said in the mini tutorial
Hitmax117 said:
np
and yes, but first you have to backup content and use rom manager to create partition like I said in the mini tutorial
Click to expand...
Click to collapse
Hey tks man! I did it!!! But I have a couple of problems. When I wanted to restore my backup app via titanium backup, it says that I hv to clear some space for my device. And another thing is that I am glad that most of my apps are installed directly to my SD card but not all. Some apps are unable to. It was stored in the phone instead. But all in all, ur solution was good enough for me. I appreciate it. The problems don't really matter.Thank you very much!!
Sent from my HTC Legend using XDA App
bryanqjx said:
Hey tks man! I did it!!! But I have a couple of problems. When I wanted to restore my backup app via titanium backup, it says that I hv to clear some space for my device. And another thing is that I am glad that most of my apps are installed directly to my SD card but not all. Some apps are unable to. It was stored in the phone instead. But all in all, ur solution was good enough for me. I appreciate it. The problems don't really matter.Thank you very much!!
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
Problems are there to be fixed no? If you go to settings > sd card & phone storage... What sizes does it gives for internal phone storage Total/Available?
Hitmax117 said:
Yes, to your PC my mistake ;p
Since Froyo (2.2) you can move apps to your sd-card BUT it will only work for apps that support that and it can never completly move the app to your sd card because a little bit of data stays on your internal phone memory
Now if you use the method I explained before (work only on Blayo's latest rom's, for other roms there are other tutorials) It will move ALL the aplications on your phone to the sd-card (even the system apps) so the advantage of that is that there is waayy more space on your phone internal storage and you can install a lot more apps since you are using your sd-card to store the apps
Hope that clarify's a few things for you
Click to expand...
Click to collapse
So this method will not work with CyanogenMod? Is tutorial for this ROM more complex?
BTW I want to change my ROM to CyanogenMod (i currently have Gingerbread 2.3.3) , so do I first partition my micro SD card and then flash CM or vice versa?
Nidzge said:
So this method will not work with CyanogenMod? Is tutorial for this ROM more complex?
BTW I want to change my ROM to CyanogenMod (i currently have Gingerbread 2.3.3) , so do I first partition my micro SD card and then flash CM or vice versa?
Click to expand...
Click to collapse
No that method will not work
For CM you will need to
- install the rom and boot the rom until its fully loaded
- download rom manager and partion your sd-card (do not forgot to backup sdcard to pc first!!)
- once you have partitioned your sd-card install this script
- then download "A2SDGUI" and make sure that apps on sd is activated
That's it
Hitmax117 said:
No that method will not work
For CM you will need to
- install the rom and boot the rom until its fully loaded
- download rom manager and partion your sd-card (do not forgot to backup sdcard to pc first!!)
- once you have partitioned your sd-card install this script
- then download "A2SDGUI" and make sure that apps on sd is activated
That's it
Click to expand...
Click to collapse
Great, thanks.
Hitmax117 said:
Problems are there to be fixed no? If you go to settings > sd card & phone storage... What sizes does it gives for internal phone storage Total/Available?
Click to expand...
Click to collapse
It tells me 28.98 mb.
Sent from my HTC Legend using XDA App
bryanqjx said:
It tells me 28.98 mb.
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
Is that total or total available? plz give me both numbers
It's the available space.
Sent from my HTC Legend using XDA App
Hitmax117 said:
Is that total or total available? plz give me both numbers
Click to expand...
Click to collapse
Ok now I am having a couple of issues. I recently downloaded a couple of apps and I found out that they were not stored on the SD card anymore unless I move them manually. And certain apps that cannot be moved to SD, for eg. Air penguin, they will be stored on the phone instead. It's like everything is back to original.... may I know what's the problem here? Tks for ur help once again.
Sent from my HTC Legend using XDA App
Anyone able to help?
Sent from my HTC Legend using XDA App
@bryanqjx
i can suggest you redo your rom and apps and try data2ext but follow blay0's strict rule on the restart thingy in his rom thread..
1.1-(to have)
download blay0s custom CWM from
http://forum.xda-developers.com/showthread.php?t=969076
(download the customized CWM)
rename this file to update.zip and place this in the root of your sd card.
1.2-
prepare the Blay0 rom and patch leave it in your pc for now
2-(titanium bk)
use titanium backup and backup all the apps that you want. (backup the green ones which also include call logs and sms and other stuff)
3-(blay0's custom CWM)
boot up to recovery and use the update.zip to load the custom cwm
-do a backup (nandroid backup)... note on the date and time you made this backup.
-than go mounts and storage and mount usb storage...
-copy everything from your phone sd card to your pc...
3.1(repartition)
if 512MB partition is not enough, you can repartition this to 1GB (i tried 2 GB not stable). head to advance menu and partition SD card to. 1024Mb first partition second 0 third 0 and thats it... 1GB ext partition and the rest is your card FAT data. else, just skip step 4 but copy the B rom and patch to your card via usb.
4 (sd card preparation and the B rom in your card)
if you partition, go back to mounts and storage and mount usb partiton and copy all the stuff you backup just now in your pc (your whole sd card) and back to your phone sdcard again... this time copy the B rom also to your card if its not there yet.
5. (wipe and reflash B rom)
now since we have all your backup done we make a clean flash of the B rom.
go do a wipe and also wipe the cache partition and flash the B rom and patch. than reboot
6. (your new B rom)
after phone boot up. re enter your google login and other stuff like date time format... do the setup wizard.
and also let your phone sync with your account. things should look like new..
7. (titanium bk and terminal emulator)
visit market and download titanium bk and terminal emulator (u can skip this if you can use adb shell).
8. (terminal emulator)
now, use your terminal emulator and enter su if its not # (root user).
than type data2ext --enable, reboot the phone.
9. (check your setting)
after the phone reboot, you can go to setting and go see if your internal memory has expanded to your sd card or not... if its still some 100 + MB you are doing it wrong. if its 1GB than you got this rite.
10. (titanium bk)
now after the space have been made for your apps. use titanium bk to restore your data. if its a game with save. use it to restore app and data. if the app does not have any real setting or the data you just dont care. you better just restore the app and ignore the data. restore your apps first, than widgets, launcher will be last if you want to restore it with data.
note: i've been using this setting for a 6 month period without problem but because Blay0 stated that it might one day data lost your phone. so i suggest you reboot to cwm and do backup your rom, mount usb from cwm and update your backup folder in your pc with the cloworkmod folder, your DCIM folder, download, bluetooth... you get the point on what to backup.
nnote on CWM backup.... in the CWM folder in your sdcard... remember this, all CWM backup are name over a time stamp. so delete the ones you dont want.
nnnote try avoid OC to an unstable clock speed... a 1 time or 2 times reboot in a few days will risk your sd partition gone because of data2ext really don't like random reboot and this will make you in a mess. as from my experience... if you reboot your phone and it say sdcard problem... your in deep deep sh*t. as the partition got problem at the fat partition most of the time. if this happen, you need to format your card. use a recovery tool to dig your SD card for pictures and files. format your card.... load CWM to partition it again... put things back and do recovery and restore.
good luck
psyionx said:
@bryanqjx
i can suggest you redo your rom and apps and try data2ext but follow blay0's strict rule on the restart thingy in his rom thread..
1.1-(to have)
download blay0s custom CWM from
http://forum.xda-developers.com/showthread.php?t=969076
(download the customized CWM)
rename this file to update.zip and place this in the root of your sd card.
1.2-
prepare the Blay0 rom and patch leave it in your pc for now
2-(titanium bk)
use titanium backup and backup all the apps that you want. (backup the green ones which also include call logs and sms and other stuff)
3-(blay0's custom CWM)
boot up to recovery and use the update.zip to load the custom cwm
-do a backup (nandroid backup)... note on the date and time you made this backup.
-than go mounts and storage and mount usb storage...
-copy everything from your phone sd card to your pc...
3.1(repartition)
if 512MB partition is not enough, you can repartition this to 1GB (i tried 2 GB not stable). head to advance menu and partition SD card to. 1024Mb first partition second 0 third 0 and thats it... 1GB ext partition and the rest is your card FAT data. else, just skip step 4 but copy the B rom and patch to your card via usb.
4 (sd card preparation and the B rom in your card)
if you partition, go back to mounts and storage and mount usb partiton and copy all the stuff you backup just now in your pc (your whole sd card) and back to your phone sdcard again... this time copy the B rom also to your card if its not there yet.
5. (wipe and reflash B rom)
now since we have all your backup done we make a clean flash of the B rom.
go do a wipe and also wipe the cache partition and flash the B rom and patch. than reboot
6. (your new B rom)
after phone boot up. re enter your google login and other stuff like date time format... do the setup wizard.
and also let your phone sync with your account. things should look like new..
7. (titanium bk and terminal emulator)
visit market and download titanium bk and terminal emulator (u can skip this if you can use adb shell).
8. (terminal emulator)
now, use your terminal emulator and enter su if its not # (root user).
than type data2ext --enable, reboot the phone.
9. (check your setting)
after the phone reboot, you can go to setting and go see if your internal memory has expanded to your sd card or not... if its still some 100 + MB you are doing it wrong. if its 1GB than you got this rite.
10. (titanium bk)
now after the space have been made for your apps. use titanium bk to restore your data. if its a game with save. use it to restore app and data. if the app does not have any real setting or the data you just dont care. you better just restore the app and ignore the data. restore your apps first, than widgets, launcher will be last if you want to restore it with data.
note: i've been using this setting for a 6 month period without problem but because Blay0 stated that it might one day data lost your phone. so i suggest you reboot to cwm and do backup your rom, mount usb from cwm and update your backup folder in your pc with the cloworkmod folder, your DCIM folder, download, bluetooth... you get the point on what to backup.
nnote on CWM backup.... in the CWM folder in your sdcard... remember this, all CWM backup are name over a time stamp. so delete the ones you dont want.
nnnote try avoid OC to an unstable clock speed... a 1 time or 2 times reboot in a few days will risk your sd partition gone because of data2ext really don't like random reboot and this will make you in a mess. as from my experience... if you reboot your phone and it say sdcard problem... your in deep deep sh*t. as the partition got problem at the fat partition most of the time. if this happen, you need to format your card. use a recovery tool to dig your SD card for pictures and files. format your card.... load CWM to partition it again... put things back and do recovery and restore.
good luck
Click to expand...
Click to collapse
Hi! Thanks for ur generous reply! I didn't see this reply till today so I am very sry. I am gonna try this out soon but I've got a question. I want to actually overclock the phone as well so basically if I want to overclock with this rom, how do u think I should go about doing this and what should I do to prevent random reboots? Thanks for ur help once again. I really appreciate it!

[Q] Is there a way to increase system storage on Viewpad 7?

Hello!
I've just rooted Viewpad 7 and installed EUViewpad7 v1.7b firmware.
In Quick System Info app it says I have only 4 kb free "system storage" left.
I'd like to try to increase internal storage size, perhaps at expense of some internal storage or somesuch (since apps run from SD thanks to apps2sd)
And yes, the ROM already has apps2sd, so I don't think I can move any more stuff to SD without breaking everything...
Is increasing "system storage" possible ?
1. Link2sd way
- Rooted
- Partition EXT3 or 4 in your micro-sd, size whatever u want (1024 mb recommend).
- Open Link2sd's app select ext3 or 4.
- Reboot
2. a2sd way
- Rooted
- Install CMW.
- Partition EXT3 or 4 in your micro-sd, size whatever u want (1024 mb recommend).
- Install a2sd from recovery mode.
- Install a2sd gui from Google play.
- move data from app or in terminal [type su>enter>type a2sd datasd>enter>auto reboot]
3. Google move to sd-card, apps2sd or app way
- Install app that the name say move to sd or something.
- Not help.
And like other developer alway said, Do it with your own risk.
Sorry for my weak english.
I think a2sd is already installed and all the apps that can be moved to SD are on SD already (a2sd comes with EUViewpad7 v1.7b by default, and I did create all the partitions and stuff on SD. Also, terminal emulator -> a2sd check says that I have apps and dalvik cache running from SD)
So. moving apps 2 sd is unlikely to yield much relief since they all are already there
Any other ideas on getting more "system storage" ?
If your a2sd run perfect, your rom space will not decreate even if u install a lot of app.
Sent from my ViewPad7 using xda premium
Yeah.
Though I would still rather have it larger, you know, just in case (also curious about it on general principle of finding out new stuff)
indyend said:
If your a2sd run perfect, your rom space will not decreate even if u install a lot of app.
Sent from my ViewPad7 using xda premium
Click to expand...
Click to collapse
+++1 on that, many others have successfully used A2SD on the EU v1.7b ITE ROM like myself, it's been documented in extensive details in the custom Rom's thread, please re-read and follow the steps outlined, and, backup anything & everything important on the mSD card first.
I'm guessing that the mSD card wasn't fully reformatted and setup properly.
Quick key steps: make sure you do a full dalvik, cache & system wipe first (after backing up via CWM 2.x - recommended verison over 4.x or newer 5.x) and format ext3/4 with 1MB space, move/copy ZIP file back to ROM and select it to flash/install, continue with full setup, power down & restart.
You will need to re-install Titanium Backup & A2SDGUI from Market (it's now Google Play, once your account is setup/restored) and check your memory/storage with A2SDGUI, it should show plenty of available/free space for internal, system/rom and SD/ext card usage.
If not, re-check your steps and repeat it for proper installation. If it's working, A2SD will dynamically move & free up plenty of space for Apps, I have over 50 (market) apps of them in addition to the default/custom Rom's Apps, and 2 verisons (soon to be 3) of Angry Birds running on it.
A 8GB mSD is the minimum that I would use, a 16GB mSD is better with all the CWM files that you will store on it, plus MP3 and videos, etc.
FYI - mine device's readings are:
Internal memory free (total) 93MB (171MB)
SD-Ext free (total) 555MB (914MB)
/cache/free (total) 86MB (88MB)
Ram free (total) 226MB (415MB)
A corrupt installation will not display all of the above. I have yet to come across after trying other App2SD apps out in the "Market" that work and can free up so much "extra" for the Vpad7 ... YMMV
Good luck & if you are not sure, please post your results/space as shown under A2SD as written by DT.
Link of my space and u will see how much free of my viewpad7. And the most important is no app on m-sd. It's all in ext3.
http://db.tt/YTSbK5Ss
Sent from my ViewPad7 using xda premium
Okay, guess I'll just have to stop worrying lol

[Q]How to apply CyanogenMod 7.1(2)

So, first of all, a big hello to the community! Spent the last 2 hours digging around the forum, as I'm a new user and I'm amazed with this big things Galaxy has to add! I came from a Symbyan platform, and the only thing I done was Flash my Nokia 5800 with a C6 FW by PHNT.
Few days ago, I moved to this awsome Android world, where I see alot fo stuff new to my eyes, and that I wish some replys from you guys.
You all gonna say this questions are answered elsewhere, but I digged the forum, and I find the most various kind of answers for the same questions, which I'm now pretty much confused.
The thing is, I want to apply this CM7.1(or , dunno which is better), from what I see, it improves greatly our Galaxy Ace, but on the other hand, I saw a post that says taht this is simple as Root(Which I've done already), and apply a CWM or something, and apply the CM7.1 same way as Rooting.
The fulcral questions is which is the safest(and noobier-frindly) way to apply that CM 7.1?
Also if someone can aid me, what CWM does exactly? Its a backup app like TitaniumBackup?
I think you did not read This my friend.
And CWM is a custom recovery which has a lot more features than stock recovery.
CWM5 can be found Here
The tutorial is at the first link I gave you. But if you didn't understand,
I'll tell you step-by-step
1. Download the rom and CWM and put it in your phone.
2. Enter recovery and choose install zip from SD then choose CWM.
3. Reboot and enter recovery again.
4. Your now in CWM Recovery, before flashing any rom, doa wipe data.
5. Choose install zip fom SD card and choose CM7.1/2
reboot then voila
Hited Thanks for you!
Really helpfull thread! How did I missed it lol!
So the thing taht really caught my attention was the option to don't waste internal memory, which is exactly the only reason I wanted to Cyan Mod.
If it's not a hassle to you, can you pinpoint me the EXACT file to run from CWM? I really don't wanna mess up my phone(though I will only apply it after I buy my 16GB SDcard soon).
Here's where I stand:
1-> I rooted my device with some root I found over youtube, worked fine, then google play said me to update the superuser app, so I did. I guess it's updated, no problems there.
2-> Now I need CWM(I got a file named "recovery-clockwork-5.0.2.6-galaxyace-fix.zip", should I use that one or try to find the v4 one?
3-> Then I need to run on Home Button+Power to install that mod, but here comes 4 questions:
"You need to extend the internal app storage to the sd card. The FIRST thing you need to do is go back to Clockworkmod recovery mode and partition your sdcard so that it has a ext4 extension. Then update from ketut.kumajaya's post with cf-rootdtapps2sd???.zip(forgot the full name). That defaults all downloaded apps to run from the sd card."
3.1-> Does CWM have the partition option already? And does it formats the SDcard?
3.2-> Can u direct me the EXACT file so I don't mess this up?
3.3-> This doesn't wipes any data from the phone right?
3.3.3-> And what about the apps alraedy installed and using the internal memory even though they are "in SD card, as phone shows", i need to reinstall them right?
Ty again for any hassle done! And I will thank you agani, just for wasting the time here with me
2. Ok flash that. Some roms are compatible with that but not on v4
3. No. Don't use CFRoot. It's for stock roms only.
3.1 Yes, you can partitition SD card on CWM.
And yes, it wipes everything in your SD
and after you have partitioned it, download Link2sd from the market, choose ext4 then link every app (except system apps of course)
I guess that answers all, just didn't get what u meant by that, do i use taht version 5 or the v4 of CWM? And what is a stock rom? I never changed nothing on my phone except the Rooting.
NunoPitbull said:
I guess that answers all, just didn't get what u meant by that, do i use taht version 5 or the v4 of CWM? And what is a stock rom? I never changed nothing on my phone except the Rooting.
Click to expand...
Click to collapse
stock roms are roms made by samsung. Your currently in a stock rom but you are going to CM7 so don't use it anymore. Use v5
Wait, can't I have that Mod to save all in SDcard and save internt memory? I just want that thing, I dont have Cyan mod if I can do that without it
Can u pinpoint me to the correct file please?
NunoPitbull said:
Wait, can't I have that Mod to save all in SDcard and save internt memory? I just want that thing, I dont have Cyan mod if I can do that without it
Can u pinpoint me to the correct file please?
Click to expand...
Click to collapse
After you partition your sd card thorough cwm recovery, do a factory reset and then install cm7.2. Then you can use either s2e or link2sd or a2sd to free up your internal memory.
If you are asking for exact cm7.2 file, there are many of them. Try cm7.2 by vo1 first. Thread will be in development section created by Lovetz.
It seems your not really getting what I mean
First I wanted the CM7 mod, BUT after reading that thread you showed me, I saw its possible to free up internal memory WITHOUT the need of installing CM7, and installing that other file right?
I just wanted to know which is the right file so I don't mess up. I just want to have the option to save all to SDcard, and not to use Internal memory. That was the reason I wanted CM7. Understand now?
use minitool partition wizard to repartition your sdcard. create two partition, both as primary, first partition as fat32 and second partition as ext2/ext3/ext4
http://www.partitionwizard.com/free-partition-manager.html
then flash this from clockworkmod recovery. before flashing do mount system and data manually
http://forum.xda-developers.com/showthread.php?t=715940
then install this
https://play.google.com/store/apps/details?id=com.elgubbo.a2sdGUI&hl=en
NunoPitbull said:
It seems your not really getting what I mean
First I wanted the CM7 mod, BUT after reading that thread you showed me, I saw its possible to free up internal memory WITHOUT the need of installing CM7, and installing that other file right?
I just wanted to know which is the right file so I don't mess up. I just want to have the option to save all to SDcard, and not to use Internal memory. That was the reason I wanted CM7. Understand now?
Click to expand...
Click to collapse
I FULLY understand what you want And I am telling you that you do not need those files to transfer apps to sd. ust partition your SD via CWM, doanload Link2sd choose ext4 then link all of them
an0nym0us_ said:
use minitool partition wizard to repartition your sdcard. create two partition, both as primary, first partition as fat32 and second partition as ext2/ext3/ext4
http://www.partitionwizard.com/free-partition-manager.html
then flash this from clockworkmod recovery. before flashing do mount system and data manually
http://forum.xda-developers.com/showthread.php?t=715940
then install this
https://play.google.com/store/apps/details?id=com.elgubbo.a2sdGUI&hl=en
Click to expand...
Click to collapse
Doo:DAce said:
I FULLY understand what you want And I am telling you that you do not need those files to transfer apps to sd. ust partition your SD via CWM, doanload Link2sd choose ext4 then link all of them
Click to expand...
Click to collapse
See what I mean? One guy tells me totally different apps to download + a PC program and to flash another app then you say, and you say with only 1 app + the Link2SD I can do it That's why I get confused ;p I guess both apps are good, which one the safest and best?
Doo:DAce said:
I FULLY understand what you want And I am telling you that you do not need those files to transfer apps to sd. ust partition your SD via CWM, doanload Link2sd choose ext4 then link all of them
Click to expand...
Click to collapse
So it's only that? No need for that "update from ketut.kumajaya's post with cf-rootdtapps2sd???.zip(forgot the full name)" zip?
Also which CWM I use, v4 or the one I have?("recovery-clockwork-5.0.2.6-galaxyace-fix")
Lol they are many ways to partition your SD card ...cwm recovery eliminates the need of a PC but Mini tool partition wizard is recommended ( though I trust cwm recovery blindly )
Dragonoid said:
Lol they are many ways to partition your SD card ...cwm recovery eliminates the need of a PC but Mini tool partition wizard is recommended ( though I trust cwm recovery blindly )
Click to expand...
Click to collapse
Can you tell me how is it partitioned?
First partition will be for photos etc, the 2nd will be for apps?
Can you pinpoint me the .apk file for CWM you use?
Also, what should I expect when doing the partition trought CMW? Its just an option saying to do the partition? I read taht is needed to mount/unmount things,I have NO IDEA on how to achieve that.
If u got access to pc, better do it on pc with minitool after making backup of your whole sdcard. Yes cwm can do it but who know when disaster strike u'll lose all your sdcard data. Better to be safe than sorry mate.
NunoPitbull said:
Can you tell me how is it partitioned?
First partition will be for photos etc, the 2nd will be for apps?
Can you pinpoint me the .apk file for CWM you use?
Also, what should I expect when doing the partition trought CMW? Its just an option saying to do the partition? I read taht is needed to mount/unmount things,I have NO IDEA on how to achieve that.
Click to expand...
Click to collapse
Well cwm 5 can be found by Googling ( cwm 5 for Samsung galaxy ace)
2. It's not how you think ..once you partition your SD card the partition is inaccessible to you ..example if on a 2 gb card if u create a partition of 512mb when u go to settings the phone will read your SD card as 1.5 gb
3. Cwm guides are readily available on you tube
4. As the other guys have said b4 u need to use apps like link2sd to be able to use the partition ..entirely for apps alone ...s2e is the best but works ONLY on cm7
5. During the partition process your SD card will be formatted !!!
Backup your Data first! !!!!
6. Anything else???
P.S. I can't provide links as I m on my phone and even on a PC I would have advised u to Google
So, in your example, on a 2GB card, the phone will read only 1,5GB, so what will be that 1,5GB for? And the 512MB what will they be for?
Thanks for the reply
NunoPitbull said:
So, in your example, on a 2GB card, the phone will read only 1,5GB, so what will be that 1,5GB for? And the 512MB what will they be for?
Thanks for the reply
Click to expand...
Click to collapse
1.5 gb will be for your media -photos videos files etc that 512 MB is accessible only through s2e,link2sd and other such apps( u see I know only these 2 ) this 512 MB can be used to store your apps ---I.e. move the dalvik cache to the SD card which in turn results in a lot of free internal space....
Once upon a time I had 120 apps on my phone and 50 MB was still remaining.
P.S. please don't ask what dalvik cache is ...Google it instead ..ull get better info
Dragonoid said:
1.5 gb will be for your media -photos videos files etc that 512 MB is accessible only through s2e,link2sd and other such apps( u see I know only these 2 ) this 512 MB can be used to store your apps ---I.e. move the dalvik cache to the SD card which in turn results in a lot of free internal space....
Once upon a time I had 120 apps on my phone and 50 MB was still remaining.
P.S. please don't ask what dalvik cache is ...Google it instead ..ull get better info
Click to expand...
Click to collapse
So u still loose internal space even after this patchs?

Categories

Resources