So I have this problem I think many of you have had before.. I put SetCPU at 768mhz out of curiosity and voila it doesnt work. Is there any trick that I could pull to modify the value back to 710 (or default) without doing a full wipe ?
Help much appreciated.
Ps. I need my cell in about 1.5 hours.. :S
problem solved:
I installed a different kernel with default clocks ftw
Related
I was trying to use set cpu,im completely stock but rooted, but every time i use it the phone itself just reboots or doesn tturn on until a battery pull, is it the app? the phone? the kernel?
i came from a vzw droid 1 and 2 and i knew that it had to do with the kernels but i was wondering if people know about this or know a fix
thank you
Set CPU can only be set on conservative for the vibrant.
also when setting profiles, min 200 any lower = sleep of death.
or some vibrants can't handle overclock.
Hello
My galaxy s2 doesnt wake up after put in to sleep mode, back n menu keys light up but no haptic feedback, while screen is on, no problems at all. please help me as ive tried wiping, reflashing different roms, trying multiple kernels and setting clock frequencies to always be on 1,2 ghz.
You must have something installed, like SetCPU and the phone goes below 200 MHz in powersave mode.
To all,
Please don't play with underclock/undervolt/overclock stuffs too much, it can damage the device big time. This is a phone for gods sake, keep playing with Sandy Bridge CPU's, they will take your tortures.
Regards.
I do have SetCPU installed, though i haven't touched the frequencies or voltages until after this problem which was when I put the frequencies to 1,2 gHz as lowest and highest. I have discovered another problem where TW launcher gets FC as soon as I touch the screen. Will try to uninstall SetCPU if I get the oppertunity.
wipe and then install cognition s2, its a modem rom and kernel all in one so you'll have no problems. then once its installed don't install setcpu
Sent from my GT-I9100 using XDA Premium App
Thank for your reply and all your help, I was insecure about custom roms so i installed stock rom amd it turned out great
Hi guys i have a tiny problem i need clarifying please.
Before anyone says anything i already asked this question and no one seemed to be able to answer it to me. So here it goes.
My question is can we combine the two. What i mean is use Voltage Control to set cpu Voltages and use No Frills to adjust Cpu clock speeds. Voltage Control on my latest rom that i am on Hyperdroid latest version does not save my overclocking and reverts back to stock frequencies 1200Mhz-200Mhz even after i save it on boot. I leave it to reboot for a few minutes till the phone settles and go to check it and governor and i/o schedulers are saved and my voltages also but the only thing that reverts back is the cpu clock frequencies. When using No -Frills though it saves my overclocking.
So my question can i use one app to overclock and the other to undervolt and use them both at the same time?
I know stupid question and i am pretty sure that i know the answer already but if i can get a few opinions regarding the matter i would appreciate it..Also why on the latest firmware it reverts back to stock frequencies even when we save it on Voltage Control is it a bug or something and does anyone if it will get fixed as i really like that app since it does everything i need it to.
Thanks again
you can use both, but I don't see why, VC has also CPU sliders so you can set both parameters from one app
maranello69 said:
you can use both, but I don't see why, VC has also CPU sliders so you can set both parameters from one app
Click to expand...
Click to collapse
Yes i know that. But see the whole point of asking this question is that Voltage Control reverts my frequencies back to stock..So say i try to set my cpu clock frequencies to 1600max-200min and then save it and set on boot once i reboot my phone it reverts it back to stock frequencies...Hence why i am currently using only No frills at the moment till this issue is fixed...And hence why i was wondering if i can undervolt with one app and overclock with the other
Does two similar cpu frrequency changer conflict and result in reboot?? Cause recently I used 2 apps setcpu and cpu control lite and witnessed 3 reboots back to back.
XGr7078 said:
Does two similar cpu frrequency changer conflict and result in reboot?? Cause recently I used 2 apps setcpu and cpu control lite and witnessed 3 reboots back to back.
Click to expand...
Click to collapse
I use a value of 748 in SetCPU it works fine, if I put more, I get a reboot.
red led flashed
I mistakenly pulled the trigger and overclocked to 825 MHz I got freeze nothing working on phone.Then I reflashed rom with hot reboot......Was this necessary or was there another way out..????
Hi,
on my Xperia Go which has ICS and is Rooted. I installed Antutu CPU, Voltage Control, SetCpu and everyone of them doesn't seem to work.
The problem is this. When i change minimal frequency to 400MHz, aply this change and press home button. Then for a while (like 30sec) everything is ok. But after this time something overwrites the changed settings of those programs and it is again on default 200-1000MHz.
For getting information about actual Frequency usage i use "CPU Spy".
FYI i didn't use more then one of those programs at the same time. Just saying, that i tried more than one
What do you think could be the problem?
Am i doing something wrong?
Dunno if it'll help, but there is some info about my phone.
Model: Xperia Go (ST27i)
Android version: 4.0.4
Kernel version 3.0.8+
Build number: 6.1.1.B.1.10
Rooted with http://forum.xda-developers.com/showthread.php?t=1886460 version 12
SetCpu from http://forum.xda-developers.com/showthread.php?t=505419 latest version
Thanks!
I have pretty much the same setup and the same problem (only tested SetCPU, though).
Any changes to the frequencies are reset to 200-1000 after a short while, no matter if set by hand or profile. The only thing that works is specifying the 'Performance' governor to keep the frequency at 1000 all the time. Which, admittedly, is still better than having to use this phone with the remarkably sluggish default settings but takes its toll on the battery life.
Long story short: A bump for this topic in hope to find a solution to this...