6/1 Android Build WIFI not working??? - Touch Pro2, Tilt 2 Android General

Hi there guys well i just installed the new Android build.. and when i have 2 sign up to google or gmail because i got gmail it wont search a internet spot...
and i got gps so i always use the WIFI.
tnx

u have to be more specific. It may be why no one has responded other than me yet.

i think he is referring to one of these:
http://glemsom.anapnea.net/android/htc-msm-android/
http://glemsom.anapnea.net/android2/htc-msm-linux/

I've been having the same problem since the beginning but nobody has really been able to figure out what's wrong. I turn on WiFi and then after a couple seconds I see an error that says "Unable to scan for networks.", and then WiFi shuts down.

^Same problem here. Wifi not working.

If you guys won't tell us what version you are using and if you got the batterie fix installed etc, then we won't be able to help you. So be more specific so we can help.

Build: [email protected]_150404
kernel:6e8abc4740a90c0a592ce9add49d8eab9f35633d Wi-Fi:12e1f9b75b92213a6b028b3ab35a6e22f7217f80
Date: Sun Jun 06 15:04:04 2010 +0200
that build doesnt have working wifi on tilt 2s...
but the droid 2.1 with launcher pro has working wifi...

you need to intall the modules that fix the wifi if you have the battery fix. its on the home site here

moto2000 said:
but the droid 2.1 with launcher pro has working wifi...
Click to expand...
Click to collapse
I installed this version of android, but also get the message:
Unable to search for networks

If you use the batterie fix you need to install the zimage AND the module. Some people (including me ) seem to forget that.

Tried it already, but still doesn't work.
"Unable to scan for networks."

well..
well what i ment was that my WIFI wont work... i got the latest version of this tread http://forum.xda-developers.com/showthread.php?t=627997 build on 1 July-2010..with launcher pro.
This is my error that says "Unable to scan for networks.", and then WiFi shuts down...

peruwan said:
well what i ment was that my WIFI wont work... i got the latest version of this tread http://forum.xda-developers.com/showthread.php?t=627997 build on 1 July-2010..with launcher pro.
This is my error that says "Unable to scan for networks.", and then WiFi shuts down...
Click to expand...
Click to collapse
Same here been have this problem from ever since i've try android, rhod 210 cant get wifi to work for the life of me.

Someone please halp.

I dont think there is a way to get wifi and battery working at the same time in GSM phones...but I could be wrong, can someone confirm?

For what its worth, I had the same problem with wifi not working. But I didn't have my sim card in yet. not having the sim card was my problem. if that's your problem you might get connected to wifi after trying my option which made everything work smoothly.

Anyone having any luck yet with this?

ijwhelan said:
Anyone having any luck yet with this?
Click to expand...
Click to collapse
the newest rootfs fixes this.

i got the new build 16/6
well i got the new build 16/6 and still no WIFI working... do i have to update before i run the xandroid?

New user here, I'm also having the exact same issue.
Phone: HTC TIlt 2 (gsm)
windows Mobile 6.5 Professional
CE OS 5.2.21849(Build: 21849.5.0.63)
CPU: Qualcomm 7201A
Rom Version: 1.59.502.3(67150)WWE
Radio Version: 4.48.25.20
-every time wifi is enabled it displays the scanning icon for a few seconds and than pops up a message saying unable to scan for networks. The message will repeat two or three more times and than wifi shuts off.​
I've tried the all of the 6/16 builds (2.0.1 Eclair, 2.1 AOSP, Sense etc.) as well as the 6/06 and several of the older builds Even the 3/01 builds when wifi was first working. In fact I also tried adding the device's MAC to the startup.txt with those builds, and the current ones. I've tried battery fix free builds, so I dont think that is the issue.
I ran both a .cab install with the Project Android launcher, and the manual install booting with haret.exe.
I updated to the latest rootfs, zimage, and initrd. And I deleted my data.img after every update
I'm still using the stock rom and radio. Although I have seen other users with the same specs who have working wifi. I'd like to avoid flashing a new rom and radio to the phone if possible, but I suppose it will be my next step if i can't find any other fix.
Any thoughts on what I'm doing wrong? Did i miss something stupid?

Related

(OFFICIAL) [email protected]_2.3.3_v2 Problems

Hellao Everyone
Well i FLashed (OFFICIAL) [email protected]_2.3.3_v2 two days ago with Franco's LAtest [KERNEL][12 JUL]franco.Kernel |.v1-GINGERBREAD| 2.6.35.13
Everything RUns Smooth and makes a 770 Quadrant Score with CPU settings on
122/691 using nofrills with interactiveX
Smoothass for some reason BUrns my Battery down very fast idk why ;S
coming to the point
both Tethering Dosn't Work here, neither USB not wifi :S
and another thing i noticed my Boot Animation is Still the same old Android and ...
When i lock the phone, Screenlock thingie there is no sound :S
any Suggestions
Your boot animation is still what?
v 2 has android eating apple...if your boot doesnt have that then you have failed flashing I guess.
I used v 2 for a couple of days, the wifi tethering worked, I didnt try usb tethering.
Back to v 1.2 for some reasons, especially the battery which I think last longer in the earlier version.
Regards
ok i re flashed the v2 patch, now i see the Droid Eating Apple, lmao'd there coz i was waiting to see it the 1st time but i just got the other default android thingie,
about the tethering,
1st time it says Wifi Hotspot Hosted but when my laptop connects to it, or i can say establishes connection to the hotspot it says Error on the Phone and the Tethering Icon Disappears.
i can ping to the phone but it dosn't send/receive anything :S
and wifi kinda gets bugged after this in the sense it connects to my wifi router but dosn't process any data, it uses EDGE to Send/Receive Data
ok its official Tethering dosn't work with v2 Some more ppl posted on the Official Thread so i guess its the kernel's fault coz some ppl have trouble with wifi too,
hope Franco implements a Update soon ;-D
Anyways thanks for the info @least my Boot Animation Changed xD
Hello!
I've been reading a lot about this new gingerbread and stuff.. I came to flash this rom after the official flashing... just because I wanted root and oc.
BUT, idk really why, some apps doesn't work right...
sadly, I didn't try to install this apps BEFORE flashing this ROM.
the apps are:
Jed (Japanese dictionary), this just crash after installing the dic files...
Kanji Recognizer, this is in a loop, you download the dic files over and over again...
It's weird, I thought first it was because of some problems with Japanese language and characters,,. but I've had to find other (not so good) apps for this matters... Also I've searched if somebody else had this problems with this app in Gingerbread but it seems that it's only me...
if somebody have any clue... please
Thanks!

[Q] Network connection issues

Not sure exactly how to start this off but I am having issues using my network on my X10. I've included a screenshot of the general info from my phone. My X10's bootloader is unlocked, CM7 installed. I followed the directions here to unlock the bootloader and get CM7 on my phone. I have the applicable APNs for the NTT Docomo network (also included screenshot). With wifi enabled the mobile network connection becomes disabled and re-enables itself when wifi is turned off.
I've searched all over the forums and the internet and couldn't figure out any fixes. Any help will be appreciated.
Yes, the data problem exists in fxp 41 and 42 of CM7. Ppl have said that icons turn green and then there network dosent work. Thankfully I am not facing it.
I dont use market and havent synced my phone with google account. Hope this works for you.
I've been looking for the FXP030 but the link is down. Is there a mirror or another CM7 mod that I can use. I've tried using busybox to kill servicemanger but busybox is stuck on a loading screen even after rebooting the phone.
CyanogenMod network problem
Hi all i have this problem also...
network not working, and problem with market and email..
ifi go to recovery and wipe dalvik then market works but when i try to go on internet or try to setup email network crashes...
The FXP30 link is down. I guess someone has requested to reupload the files. Check there thread for this update. I guess fxp 43 will be released anytime this week. So try your luck on it.

I can't add Google account

I have two Folio 100. In the first i can add Google or Exchange account but in the second it's only possibe add Exchange account .
Do you know what's the problem?
I'm using Cyanogenmod 7.1.0 and i have tried also with Cyanogenmod 7.2 RC0 with the same problem. Also using ClockWorkMod recovery for Betelgeuse v0.3
Are you logged on on one of them when you try to add on another?
I have the same problem... Im trying fixing it but i only have this problem on HC roms in Cyano works good
I have the same problem to. It must be a google problem, market does not work either.
Please help,
Another webkit??
Merxthik said:
I have the same problem... Im trying fixing it but i only have this problem on HC roms in Cyano works good
Click to expand...
Click to collapse
+1 no problems with cyano and foliomod
But i had the same problem with HC rom, and i solved it doing another factory reset after updating the rom
Google Account
Palastochas said:
+1 no problems with cyano and foliomod
But i had the same problem with HC rom, and i solved it doing another factory reset after updating the rom
Click to expand...
Click to collapse
Power off your device, turn off batterry & try again.
If google acc not connected on Wi-Fi, try on 3G (need only first for Google Acc, after use normally on WiFi)
I'm struggling with this too - I'm on the rom Folio 3xx v0.4.
I sit there with the google account creation screen constantly getting an error message of 'cannot get a reliable connection'. If I use the web interface it logs in fine but puts up error of an account creation issue on the device. There's no further details provded. I can't use a 3G connection as it's just a normal folio 100.
Any help would be greatly appreciated.
(would have posted this in the dev thread but I can't post there till my account is mature enough)
Did you try that on first boot? Wifi isn't working on first boot and 3G modem is supported.
Jon2555 said:
Did you try that on first boot? Wifi isn't working on first boot and 3G modem is supported.
Click to expand...
Click to collapse
Hi Jon, Unfortunatly no - there had been many, many reboots. I originally installed the rom and somehow got around this issue (although it did occur). Unfortunatly I was experiencing many apps refusing to run - I then noticed your post telling somone to try a fastboot -u (?) to fix this problem. This worked and the build then had a lot more working apps... but this problem occured.
To be honest I've now given up on the honeycomb build, and gone on to try CM7. The device is a lot more useful with that on, however I had hoped for a chance of using adobe photoshop touch on the device as it would have been useful for work and general use.
My hope is kind of on you and nopy with your ICS build. Wish I could help but I'm new to android!

[Q] Wifi cannot go past "turning on" status - Galaxy Grand Quattro

I think I've messed up again. Whenever I try to turn my wifi on, it gets stuck at the "turning on" status and then crashes after a couple of minutes. I have no error messages. It just closes after some time. The last thing I remember I did regarding wifi was to recover a stored password using Wifi Password Recovery App. Then this happened.
My phone is rooted and I have cwm. I've tried basic troubleshooting like power cycling, deleting wpa supplicant file (found in a post somewhere), tried turning wifi on using allsahare play, untweaking internet, but they just didn't work.
I'm ready to flash a stock ROM. But I'm just curious if you have any other suggestions before I do it because I've read some posts saying that reflashing didn't work as well.
Please help XDA Developers!
I guess no one has the solution yet. But I have discovered something, and I hope this would help. I found the file, init.qcom.wifi.sh, using root browser. I executed it and I got a script output stating an error. WI-FI chip ID is not specified. I have attached screenshots so you may as well check them out. Also, I noticed the files under date\misc\wifi are all 0.00 B which i think means they are empty. Please help experts.
theguynamedjake said:
I guess no one has the solution yet. But I have discovered something, and I hope this would help. I found the file, init.qcom.wifi.sh, using root browser. I executed it and I got a script output stating an error. WI-FI chip ID is not specified. I have attached screenshots so you may as well check them out. Also, I noticed the files under date\misc\wifi are all 0.00 B which i think means they are empty. Please help experts.
Click to expand...
Click to collapse
First of all you've got to flash any custom rom available in order to use wifi again !!!
Now regarding this issue u've just mentioned I'll try to investigate it further !!!
Thanks man. I flashed JASP ROM and its working fine now.
Didnt work
theguynamedjake said:
Thanks man. I flashed JASP ROM and its working fine now.
Click to expand...
Click to collapse
i tried all the above methods and even when on a full cleanrom install including the jasp rom but nothing has happened please help
Try reverting back to stock temporarely with Odin, this happens in my Note 3 and used to do the same in my S2, but only with the proximity sensor. The idea is the same, replace all settings to stock and flash whatever you want after (boot the stock though and test wifi just in case).
Why this works i have no idea, but it saved my arse loads of times. I can guess some internal devices might have flags configured which could be chip based rather then ROM/emmc related, but that is only my supposition.

Moto Z XT1650-01 wifi and bluetooth Problem

When I was On android 7.0 every thing was working after updating to 7.1.1 wifi and bluetooth stoped working ...
I searched every where but did not find solution
Now again an OTA update came and after updating problem is still there ..
Anyone who had a luck to solve this issue ..
Please Guide me .
Help please
malkuu said:
When I was On android 7.0 every thing was working after updating to 7.1.1 wifi and bluetooth stoped working ...
I searched every where but did not find solution
Now again an OTA update came and after updating problem is still there ..
Anyone who had a luck to solve this issue ..
Please Guide me .
Click to expand...
Click to collapse
I have the same problem
i found, in the app "device help" especifictly in hardware tests when the wifi connect and show connected but without internet, in this part of test show MAC 02:00:00:00:00
nintai said:
I have the same problem
i found, in the app "device help" especifictly in hardware tests when the wifi connect and show connected but without internet, in this part of test show MAC 02:00:00:00:00
Click to expand...
Click to collapse
Many of us has this problem but no one had luck to solve this problem ?
Reply
malkuu said:
Many of us has this problem but no one had luck to solve this problem
Click to expand...
Click to collapse
My model is XT1650-03 in phone status, i had build number NPLS26.118-20-5-3 Android Version 7. 1. 1 with this my wifi no works but my Bluetooth works
so i re install with previous build number NPLS26.118-20-5 same Android Version 7. 1. 1 and for few days the wifi works but not bluetooth until the day by OTA update to build number NPLS26.118-20-5-3 and few days after suddenly the wifi no works but my Bluetooth works.
i will try re install with build number NPLS26.118-20-5 and check if works, after that i update in the post. :fingers-crossed:
i can`t put links to the screenshots :crying:
(To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding! )
the same problem
i have the same problem in my moto z xt1065-05 , wlan MAC is 02:00:00:00:00,bluetooth is working.
i have the same problem in my moto z xt1065-03 bluetooth not work after n 7.1.1 but wifi work fine how can i fix this ?
You need a motherboard replacement.
If your phone is still covered by warranty, you can send it to a Motorola repair center to have it fixed (and wait 2 or 3 months).
Drx86 said:
You need a motherboard replacement.
If your phone is still covered by warranty, you can send it to a Motorola repair center to have it fixed (and wait 2 or 3 months).
Click to expand...
Click to collapse
I am fed up with this phone ?
And my phone is not under warranty ?
nintai said:
My model is XT1650-03 in phone status, i had build number NPLS26.118-20-5-3 Android Version 7. 1. 1 with this my wifi no works but my Bluetooth works
so i re install with previous build number NPLS26.118-20-5 same Android Version 7. 1. 1 and for few days the wifi works but not bluetooth until the day by OTA update to build number NPLS26.118-20-5-3 and few days after suddenly the wifi no works but my Bluetooth works.
i will try re install with build number NPLS26.118-20-5 and check if works, after that i update in the post. :fingers-crossed:
i can`t put links to the screenshots :crying:
(To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding! )
Click to expand...
Click to collapse
I have tried flashing modem also but it did'nt work
Have tried many things but no luck till now
malkuu said:
I am fed up with this phone
And my phone is not under warranty ?
Click to expand...
Click to collapse
Then there is no solution.
Mine is still under warranty, I sent it to Motorola two months ago, and they have NOT fixed it yet.
I will NEVER buy another Moto again.
I had this problem with wifi (mac 02:00...) and it came out to be a 100% software problem. I got it as a result of unsuccessful BL unlock, twrp, then root... Finally I decided to get back to locked BL and stock ROM. And "voila!" my wifi is back and is fully functional...
Very Well
chegemli said:
I had this problem with wifi (mac 02:00...) and it came out to be a 100% software problem. I got it as a result of unsuccessful BL unlock, twrp, then root... Finally I decided to get back to locked BL and stock ROM. And "voila!" my wifi is back and is fully functional...
Click to expand...
Click to collapse
Congrants :good:
That is a great new for all of us (if the cause is the same of course).
now the big question, how did you do it?. You could be a little more specific please.
1. what stock frimware you used?
I try whit this (XT1650-03_GRIFFIN_RETAIL_7.1.1_NPLS26.118-20-5-3_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip) this because the build number of my moto z in this moment is NPLS26.118-20-5-3 but i dont sure.
The Frimware i got it from this web https: //mirrors.lolinet.com/ firmware/moto/griffin/official/RETUS/
2. You previous version ROM ( 7.1.1. ) of android corresponse to the new version stock (7.1.1.) you used to flash or are diferents ??.
3. The Build Number Version was equals?
Thanks for your time!!
i got it fixed when i formatted my cell from recovery now wifi is working but bluetooth is not so definitely its not the hardware issue its only related to software
I have a similar problem with wifi (and hotspot) in my Moto Z. Wifi MAC is 02:00:00:00:00:00.
The battery is also drained really quick - it lasts only 1 day.
The problem occurred a few days ago without any good reason - I did not update nor install anything lately. I tried wiping cache - no success.
edit:
MAC has returned to normal, bluetooth is working.
Wifi still does not find any networks.
My battery mod does not charge the phone - I have no idea why
LitD said:
I have a similar problem with wifi (and hotspot) in my Moto Z. Wifi MAC is 02:00:00:00:00:00.
The battery is also drained really quick - it lasts only 1 day.
The problem occurred a few days ago without any good reason - I did not update nor install anything lately. I tried wiping cache - no success.
edit:
MAC has returned to normal, bluetooth is working.
Wifi still does not find any networks.
My battery mod does not charge the phone - I have no idea why
Click to expand...
Click to collapse
How did you got it back ? Explain something
I did not get it back - wifi still does not work, only MAC returned to normal.
I did not do anything special - just discharged and recharged the phone a few times.
Yesterday I reflashed the kernel (latest TurboZ), wiped cache and power drainage has returned to normal, but MAC is again 02:00:00:00:00:00. No idea why.

Categories

Resources