Not sure exactly how to start this off but I am having issues using my network on my X10. I've included a screenshot of the general info from my phone. My X10's bootloader is unlocked, CM7 installed. I followed the directions here to unlock the bootloader and get CM7 on my phone. I have the applicable APNs for the NTT Docomo network (also included screenshot). With wifi enabled the mobile network connection becomes disabled and re-enables itself when wifi is turned off.
I've searched all over the forums and the internet and couldn't figure out any fixes. Any help will be appreciated.
Yes, the data problem exists in fxp 41 and 42 of CM7. Ppl have said that icons turn green and then there network dosent work. Thankfully I am not facing it.
I dont use market and havent synced my phone with google account. Hope this works for you.
I've been looking for the FXP030 but the link is down. Is there a mirror or another CM7 mod that I can use. I've tried using busybox to kill servicemanger but busybox is stuck on a loading screen even after rebooting the phone.
CyanogenMod network problem
Hi all i have this problem also...
network not working, and problem with market and email..
ifi go to recovery and wipe dalvik then market works but when i try to go on internet or try to setup email network crashes...
The FXP30 link is down. I guess someone has requested to reupload the files. Check there thread for this update. I guess fxp 43 will be released anytime this week. So try your luck on it.
Related
Hi there guys well i just installed the new Android build.. and when i have 2 sign up to google or gmail because i got gmail it wont search a internet spot...
and i got gps so i always use the WIFI.
tnx
u have to be more specific. It may be why no one has responded other than me yet.
i think he is referring to one of these:
http://glemsom.anapnea.net/android/htc-msm-android/
http://glemsom.anapnea.net/android2/htc-msm-linux/
I've been having the same problem since the beginning but nobody has really been able to figure out what's wrong. I turn on WiFi and then after a couple seconds I see an error that says "Unable to scan for networks.", and then WiFi shuts down.
^Same problem here. Wifi not working.
If you guys won't tell us what version you are using and if you got the batterie fix installed etc, then we won't be able to help you. So be more specific so we can help.
Build: [email protected]_150404
kernel:6e8abc4740a90c0a592ce9add49d8eab9f35633d Wi-Fi:12e1f9b75b92213a6b028b3ab35a6e22f7217f80
Date: Sun Jun 06 15:04:04 2010 +0200
that build doesnt have working wifi on tilt 2s...
but the droid 2.1 with launcher pro has working wifi...
you need to intall the modules that fix the wifi if you have the battery fix. its on the home site here
moto2000 said:
but the droid 2.1 with launcher pro has working wifi...
Click to expand...
Click to collapse
I installed this version of android, but also get the message:
Unable to search for networks
If you use the batterie fix you need to install the zimage AND the module. Some people (including me ) seem to forget that.
Tried it already, but still doesn't work.
"Unable to scan for networks."
well..
well what i ment was that my WIFI wont work... i got the latest version of this tread http://forum.xda-developers.com/showthread.php?t=627997 build on 1 July-2010..with launcher pro.
This is my error that says "Unable to scan for networks.", and then WiFi shuts down...
peruwan said:
well what i ment was that my WIFI wont work... i got the latest version of this tread http://forum.xda-developers.com/showthread.php?t=627997 build on 1 July-2010..with launcher pro.
This is my error that says "Unable to scan for networks.", and then WiFi shuts down...
Click to expand...
Click to collapse
Same here been have this problem from ever since i've try android, rhod 210 cant get wifi to work for the life of me.
Someone please halp.
I dont think there is a way to get wifi and battery working at the same time in GSM phones...but I could be wrong, can someone confirm?
For what its worth, I had the same problem with wifi not working. But I didn't have my sim card in yet. not having the sim card was my problem. if that's your problem you might get connected to wifi after trying my option which made everything work smoothly.
Anyone having any luck yet with this?
ijwhelan said:
Anyone having any luck yet with this?
Click to expand...
Click to collapse
the newest rootfs fixes this.
i got the new build 16/6
well i got the new build 16/6 and still no WIFI working... do i have to update before i run the xandroid?
New user here, I'm also having the exact same issue.
Phone: HTC TIlt 2 (gsm)
windows Mobile 6.5 Professional
CE OS 5.2.21849(Build: 21849.5.0.63)
CPU: Qualcomm 7201A
Rom Version: 1.59.502.3(67150)WWE
Radio Version: 4.48.25.20
-every time wifi is enabled it displays the scanning icon for a few seconds and than pops up a message saying unable to scan for networks. The message will repeat two or three more times and than wifi shuts off.​
I've tried the all of the 6/16 builds (2.0.1 Eclair, 2.1 AOSP, Sense etc.) as well as the 6/06 and several of the older builds Even the 3/01 builds when wifi was first working. In fact I also tried adding the device's MAC to the startup.txt with those builds, and the current ones. I've tried battery fix free builds, so I dont think that is the issue.
I ran both a .cab install with the Project Android launcher, and the manual install booting with haret.exe.
I updated to the latest rootfs, zimage, and initrd. And I deleted my data.img after every update
I'm still using the stock rom and radio. Although I have seen other users with the same specs who have working wifi. I'd like to avoid flashing a new rom and radio to the phone if possible, but I suppose it will be my next step if i can't find any other fix.
Any thoughts on what I'm doing wrong? Did i miss something stupid?
I'm on the latest nAa kernel, using MiniCM7-2.1.9, but wifi just doesn't work. I can browse the internet using my 3G connection, just not wifi for some reason.
Wifi shows it's connected, the signal bars is full but it just doesn't download any data, it's like it's not connected at all. It's able to get an IP address and the link speed is good but it just doesn't get any data.....
I've tried searching through different posts and tried solutions such as:
http://forum.xda-developers.com/showpost.php?p=21766413&postcount=498
as well as the instruction to fix wifi in the Troubleshooting page here:
http://code.google.com/p/minicm/wiki/Troubleshooting
and this:
http://forum.xda-developers.com/showpost.php?p=22170822&postcount=817
I also cleaned the dalvik cache by going into recovery, reboot and still doesn't work.
and they all don't work....
UPDATE:
OK nvm it works now. I reflashed the kernel, wipe data & factory reset and then reflash the rom, and now it works. It's the exact same thing I did for the past 30 mins, except this time I also reflashed the kernel. I just hope it'll continue working.....
UPDATE 2:
Ok, now it's not working again. I rebooted the phone twice, and it was able to connect to wifi no problem. But then later on it stopped working again, I didn't install or change anything either.
I also noticed that whenever I'm connected to wifi on my phone, the wifi on my PC will timeout and drop connection. If I then try to connect wifi on my PC, then the wifi on my phone will timeout. Basically, I can't connect both at the same time.
But all my other devices work fine. My Motorola Milestone and my mom's HTC Desire Z works fine. My iPod Touch works fine, I've NEVER had a wifi issue with any of my devices until I tested out my new Xperia X10 Mini Pro today.......
I haven't tried testing it on stock rom & kernel, because the first thing I did was to unlock the bootloader and flash the nAa kernel + MiniCM7-2.1.9. And I can't be bothered flashing back to stock since I won't be staying on stock anyway, especially after setting up everything already so I can't really be bothered.....
Anyway, so I then tried to delete wpa_supplicant.conf in data/misc/wifi (as mentioned above) and this time it shows "Error" under Wi-Fi settings.
This is really annoying me....
One note about wpa_supplicant.conf (/data/misc/wifi/wpa_supplicant.conf). In stock kernel with MiniCM Pro from paul-xxx the right ctrl_interface was wlan0.
nAa kernel (with MiniCM from nAa) needs tiwlan0.
So it isn't necessery to delete file with all wifi networks when changing kernel/ROM but one value in config file.
ya, except the value was tiwlan0 already, I tried changing it back to wlan0 and nothing happens. So then I tried deleting it, and now whenever I try to turn Wifi on it just shows Error.
What's actually strange about this is that I've backed up the original file, and when I restored it and tried to turn Wifi on, it turns on but doesn't display any network.
Before, it would display tons of networks, and it would connect to my router (but doesn't download data for some reason). It doesn't work but at least you can tell it's able to detect networks.
Now, it doesn't even show any networks. The only way to fix this is to restore from recovery or do a wipe......
Ok so I did some research and could this be the case?
http://www.youtube.com/watch?v=DwYOtf4fI0Q
I've also tried to assign static IP but it still doesn't work. I went into my router and checked the ARP, and it shows this:
IP address Flags MAC Address Device
192.168.1.2 Complete 00:18E:48:42:C9 br0
192.168.1.3 Complete 00:E0:4C:A3:8B:A8 br0
192.168.1.6 Incomplete 18:87:96:FE:16:3E br0
192.168.1.5 Complete 48:5D:60:3B:5E:5D br0
Click to expand...
Click to collapse
where 192.168.1.6 is assigned to my phone. I'm not that good with router stuff but know the basics, does anyone know what I need to configure?
I'm having the same problem with my mini pro
Decaptivated Slamsung
nowseewhatudid said:
I'm having the same problem with my mini pro
Decaptivated Slamsung
Click to expand...
Click to collapse
I haven't had time to try this out yet, but maybe you wanna give it a try? Scroll to "PROBLEMS WITH WIFI?" in this topic here:
http://forum.xda-developers.com/showthread.php?t=1066824
Hi guys.
I'm in the Netherlands and I just managed to install Joe Stones version of CM10 for my ZTE Smarttab 10.
Sadly however 3g does not seem to work.
Problem description:
When connected to WiFi in the bottom right corner status window I can see my mobile connection being Vodafone NL and the 3g symbol is there.
However as soon as I turn off WiFi the symbol changes and I get to "No internet connection" but it gets a signal strength so I guess it can see the network at least.
I have done the following:
- Checked the APN settings and they are correct
- Tried manually connecting to the network but i get error saying that I could not get connected to the network.
- Tried to use the instruction in this thread: http://forum.xda-developers.com/showthread.php?t=1273597 but the application crashes.
Anyone has any ideas on how I can continue to troubleshoot this issue?
(I cannot post in the Rom's development thread as I dont have 10 posts, hence this forum)
Thanks for any help!
//Nagarutu
Update: I have now tried with both CM10 and CM9 but the exact same issue.
Restoring my backup to the Stock HoneyComb solves the problem with 3g but then I'm not on ICS or JB.
Also tried to disable the SIM Pin but that did not do any difference on cm9 and cm10.
Did you find a solution already? I have exact the same problem.
[update] APN settings were not completed correctly. So I assume that there was nothing wrong with that. but apparently it was / Did it, checked the Vodafone site for the settings did every step and its works.[update]
Hi hope somebody can help here, acquired this phone yesterday (used) put sim in works fine makes and receives calls no problem, connects to the net via browser sometimes no problem , when tethering with either wifi or usb connection lasts for a few mins then loses connectivity but browsing on the phone browser works fine (Icon still shows data connected arrows-- signal blue), sometimes the browser loses it too but only when trying to go to links from google search, if i scroll though the pages of search results via google it open up the next page of results WTF !!!! I have tried bluetooth and many different tethering apps all with same result, I tried to update rom but verification failed even with a force flash, cannot flash recovery as it asks for blaze drivers, tried standard adb driver but device not found when trying adb-devices , its running B021 Vodafone uk rom kernel version 3.08-00004, any ideas Im about to give up and take it back HELP !!
Update, I have managed to install clockwork by installing linux dual boot, think I will keep it too, now running jellybean, now just need to port some Roms ! also I think xda should give this phone is own section , finding anything on xda for it is nightmare !
I have looked around for a couple of hours and cannot find any answer to this.
I have just got my S3 back from being repaired after Sudden Death, and have rooted using Odin and CWM Touch 6.0.2.8, and flashed the latest cm10.1 Nightly (Currently 17022013)
I am able to connect to the mobile network (3 UK) and get a good H+ connection.
I cleared all of my saved wifi networks, and try to connect to my home connection. It Accepts the WPA key, and gets to 'Obtaining IP Address...' and does not go any further.
I have tried now on several wireless networks including insecure ones, and it will not connect.
Please help if you've had anything similar, or if I need to provide more information, a log of some kind
I have installed the latest nightly from CM10.1 and the issue is still present. Which makes me think that it is not a CM issue.
I will be re-flashing the stock image of the phone to confirm this shortly. Will post results
http://forum.xda-developers.com/showthread.php?t=2152159
this worked for me but i found it easiser to swap the folder before instaling rom