firmware 2.1-update
baseland A1-04.02.01
kernel version
2.6.29
build number
acer_liquide_1.100.05_emea_gen1
pls help me ... what is worng with my phone
i upgrade from 1.6 to 2.1 and then "no signal / no sim card inserted"...
on a network scan everithing seems ok, all the networks are there
if I tri to connect i get this eror mesage: "your sim does not alow a conection with the network... "
i realy nead help this is my only phone and ai realy love this trouble maker
pls HELP ME & sry for the bad english ...
so i have a "broke" liquid that dosn't the sim card ... a first question ... leve the sim card in ... ??? because i remuve it every time
and i did this steps
1 boot in fast boot mode
2 ACER Download Tool - conected
3 brose & select "Acer_LiquidE_1.100.05_EMEA_GEN1_2fe3feb1f695fe0b8 e22c09ae14544fd.bin "
4 click start - wait until the phone restars
from this part on i have no idee if is corect
5 the phone si working still no sim / network
6 setings -> alication -> use debug more
7 doube click reboot-bootloader-windows
8 install-recovery-windows
9 the part when i lose it
"5) Wait until it's booted and then put our latest ROM .zip into the root of the SDCard. To access you sd card from your computer, slide down the notification bar and choose the appropriate item.(It must be something like "Connected to an usb cable, activate to copy file") "
ok fron where i get the rom file
10 i used this steps
6) Reboot in recovery mode. Double-Click the file "reboot-recovery-windows.bat" (windows) or lanuch "sh reboot-recovery-linux.sh, or use "adb reboot recovery" (both)
Then wait until the device is rebooted into recovery.
7) Choose wipe data (factory/reset). Phone will reboot in recovery
8) Navigate to "apply any .zip from SD" and push the menu key, and then choose the ROM and press menu again.
Wait for the installation to finish.
Reboot.
Congrats, you're done!
except 8) [ Navigate to "apply any .zip from SD" and push the menu key, a .... etc]
pls help me out
Related
Huawei Sonic C8650
For more spesifications details, just please go here. Cause it's only have a different feature on GSM network version only, for the rest it's almost the same. But this root methods are only for Huawei Sonic C8650 CDMA!!!
Sometimes it's really hard if we're cannot root ourselves Android device. Even we've been try many root tools smiliar like SuperOneClick v2.3.3, DooMLoRD's Easy Rooting Toolkit v4.0, ZhuoDashi v2.2.17, TPSparkyRoot and etc, but it's still doesn't work. So what else to do? Trying to flash our device with custom ROM? Naaah, that's are not really wise cause we're doesn't have original ROM/firmware just in case if something happen with our device. How about to root original official ROM and without to flash the others ROM? Now, that's are more safe & wise as beginner.
And at this times i like to share my experience about this device to root successfully with no problem at all. I hope this methods will be usefully in the future for the other users. But i warning you to do not try on the others devices, cause i'm not responsible if it not working or something happen seriously. So, let's start it!
For the 1st time this methods need computer to install ClockworkMods Recovery & everything will be fine Okey, for the steps:
1. Download, copy and paste this Recovery_signed(CWM_2_Update).zip & C8650.zip files on your SD Card device
2. Download & install Pulse USB Drivers on your PC
3. Go to on your device Settings -> Applications -> then check Unknown Sources & check USB debugging on Development option
4. Shutdown or power off your device, then press & hold Volume Down + Power On button for 15 second and then plug your device into PC via USB
5. Wait for a second till PC recognize your device
6. Download & extract Recovery_signed(CWM_1_Install).zip on your PC, then run flash-recovery.bat inside on that folder when device has succesfully recognize by your PC
7. Press any key to continue on flash-recovery.bat menu
8. Wait for a second till it's done, your device will reboot it self
9. After your device has reboot and back to on again, please to shutdown your device again
10. Go to Recovery Mode with press & hold Volume Up + Power On button for 10 second
11. Select Install zip from SD Card & choose Recovery_signed(CWM_2_Update).zip files to start upgrade ClockworkMods Recovery
12. Wait till it's done & your device will reboot it self
13. Go to Recovery Mode for once again and select Install zip from SD Card, then choose C8650.zip files to start root your device
14. After your device reboot & start back to normal again, you will found Superuser has installed on your device. That's it, you has successfully root your Huawei Sonic C8650 CDMA & congrats :good:
PS: Really sorry if my english language are really bad & i just want to share my root experience with this device for the others users.
That's it & goodluck
Update on 1st post...
Update on 1st post...
Really helps (Thanks button definitely clicked)
Thank you so much Brewhoxs, I have successfully rooted my Huawei C8650 following this guide step by step, this is surely one awesome thread :good:
Root access possibly lost?
brewhoxs said:
Huawei Sonic C8650
1. Download, copy and paste this Recovery_signed(CWM_2_Update).zip & C8650.zip files on your SD Card device
2. Download & install Pulse USB Drivers on your PC
3. Go to on your device Settings -> Applications -> then check Unknown Sources & check USB debugging on Development option
4. Shutdown or power off your device, then press & hold Volume Down + Power On button for 15 second and then plug your device into PC via USB
5. Wait for a second till PC recognize your device
6. Download & extract Recovery_signed(CWM_1_Install).zip on your PC, then run flash-recovery.bat inside on that folder when device has succesfully recognize by your PC
7. Press any key to continue on flash-recovery.bat menu
8. Wait for a second till it's done, your device will reboot it self
9. After your device has reboot and back to on again, please to shutdown your device again
10. Go to Recovery Mode with press & hold Volume Up + Power On button for 10 second
11. Select Install zip from SD Card & choose Recovery_signed(CWM_2_Update).zip files to start upgrade ClockworkMods Recovery
12. Wait till it's done & your device will reboot it self
13. Go to Recovery Mode for once again and select Install zip from SD Card, then choose C8650.zip files to start root your device
14. After your device reboot & start back to normal again, you will found Superuser has installed on your device. That's it, you has successfully root your Huawei Sonic C8650 CDMA & congrats :good:
PS: Really sorry if my english language are really bad & i just want to share my root experience with this device for the others users.
That's it & goodluck
Click to expand...
Click to collapse
Thank you for this guide. But I am having a problem here.. after the last step it says root access possibly lost.. I am not sure what to do.. it says fix root..I did that. But still it doesn't seem to have worked. Can you please help me out here?
Please read carefully & follow tutorial as step by step...
how to install the pulse driver??
brewhoxs said:
Please read carefully & follow tutorial as step by step...
Click to expand...
Click to collapse
How do i install the pulse driver windows 7 x64???
Hey friends!
Recently I instal the nev versjon of lenovo VIBEUI_V2.0_1429_3_DEV_K910_WC34 and now i cant back to my old software.
I have:
a.) instaled USB drivers
b.) Minimal ADB and Fastboot 1.3
c.) recovery-clockwork-6.0.4.6-kiton.img
d.) gapps-jb-20130813-signed
When i do:
-adb reboot-bootloader ok
-fastboot boot cwm_recovery_custom.img
ht*tp*:*//s29.postimg.org/7zxmodqlj/speed.jpg
Anyone make help me resolve my problem ?
I have one mor question. If I have Update from SD card whad kind of lenovo multilanguage i must to have? Anyone make send me ling on PW?
TRY THIS
TRY THIS
1. Download K910_SS_S_2_040_0109_131226.7z from uncle Go ogle!
2. Unzip and put the .QSB file into 'sdfuse' folder.
3. Connect phone to PC and copy the sdfuse folder (that has the .qsb) to you phone sdcard. ie /sdcard/sdfuse/
4. Once done that, hopefully you backed up all your stuff, disconnect from PC & switch phone off.
5. Keep pressed Volume down + Power buttons. Phone vibrates & shows "Lenovo" logo. Let go of buttons.
6. With volume down button, scroll down to option 4. "SD Update", Power button to select it and just follow through.
7. Reboot when finished. Voila!
Hey,
I got Polaroid S20EG tablet, a few minutes ago, I tried to install Lollipop firmware which should work as I think, that's not the issue.
I used RKDevelopment Tools 1.37 and I did as these instructions:
Instructions (be aware: it is your own risk!)
1. connect your Odys Iron to the power supply and to the PC via USB cable
=========
first install only
2. boot your Oyds Iron and set storage mode to MTP and debugging to USB
3. run DriverInstall.exe
=========
4. run RKAndroidTool.exe with admin rights
5. press power button and volume up button and hold for 12 sec
6. release the power button
7. release volume up button 2 sec after "Found ..." is shown
8. select EraseIDB
9. select Run
10. Iron will boot into CWM
11. release a factory reset
12. go back, reboot system (do not fix su)
13. wait 4 min
Have fun!
Click to expand...
Click to collapse
Rom: crewrktablets.arctablet.com/?p=5617
I stopped at "select Run" cause It said "LoaderFile is not Existed" after googling it, I found out that I gotta choose a loader file, I downloaded the one on the page above and pressed Run. After that the tablet got disconnected (Status changed to: "No Found RKAndroid rock usb")
NOTE: I choose only Loader!
It doesn't start anymore :crying::crying::crying:
Please, please any help would be appreciated.....
Problem: I used the wrong bootloader and now it doesn't turn on at all, I got backup of the original bootloader.. how I can flash it back? the device is not recognized anymore
hi guys m new to redmi note 3 i applied for unlock 20 days back and i tried unlocking it on global developer build but stuck at 50% tried china developer rom still same problem even tried i.mi and shows location when phone on it shows blue color when phone switched off shows grey colour any solution for this?
or i need to flash lolipop rom？
I have the file for unlocking bootloader and installing twrp without voiding your warranty and loosing data...
Its unofficial but works well for me
I will be uploading it. With full instructions.
Wait for some days
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine
hi guys
i have a problem
when i want to unlock my bootloader with this method
http://en.miui.com/thread-253680-1-1.html
i got this error 0x80070026 receiving Hello Packet error
my device bootloader id locked and i want to unlock it without permission from miui
how can i fix this error
every things in my pc is ok
the drivers is installed succesfuly-my windows is 7 x64
i can go to edl
and try 2 version of mi flash(2015 - 2016)
:crying::crying::crying::crying:
and second question. how long does it take to I receive the permission form the miui in official method of unlocking bootloader
sorry for my bad english:good:
booshveg said:
hi guys
i have a problem
when i want to unlock my bootloader with this method
http://en.miui.com/thread-253680-1-1.html
i got this error 0x80070026 receiving Hello Packet error
my device bootloader id locked and i want to unlock it without permission from miui
how can i fix this error
every things in my pc is ok
the drivers is installed succesfuly-my windows is 7 x64
i can go to edl
and try 2 version of mi flash(2015 - 2016)
:crying::crying::crying::crying:
and second question. how long does it take to I receive the permission form the miui in official method of unlocking bootloader
sorry for my bad english:good:
Click to expand...
Click to collapse
It happened to me too. Tried many version of mi flash but it says error once hello packet and once not enough memory.
I was not able to boot up. I once again tried it.
Opened PC booted into edl mode. Flashed the ROM by proper settings by mi flash. It again showed error. Not enough memory. But this time I didn't turn my phone off. I straightly ran unlock bootloader.bat file and then flash twrp. Bat file. It worked and my phone rebooted into twrp. I wiped all data except microsd and flashed cm13 official because j need to boot up atleast. And now using it like charm flashing and installing any ROM of my choice
---------- Post added at 07:05 PM ---------- Previous post was at 07:01 PM ----------
This for other problem but may help you.
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
Yes even I got the same error when flashing fastboot ROM.. tried with older version of miflash... success... then use the batch files provided in the above post... everything will be fine..
One problem though fingerprint isn't working after flashing RR or any other custom ROM..