hi guys
i have a problem
when i want to unlock my bootloader with this method
http://en.miui.com/thread-253680-1-1.html
i got this error 0x80070026 receiving Hello Packet error
my device bootloader id locked and i want to unlock it without permission from miui
how can i fix this error
every things in my pc is ok
the drivers is installed succesfuly-my windows is 7 x64
i can go to edl
and try 2 version of mi flash(2015 - 2016)
:crying::crying::crying::crying:
and second question. how long does it take to I receive the permission form the miui in official method of unlocking bootloader
sorry for my bad english:good:
booshveg said:
hi guys
i have a problem
when i want to unlock my bootloader with this method
http://en.miui.com/thread-253680-1-1.html
i got this error 0x80070026 receiving Hello Packet error
my device bootloader id locked and i want to unlock it without permission from miui
how can i fix this error
every things in my pc is ok
the drivers is installed succesfuly-my windows is 7 x64
i can go to edl
and try 2 version of mi flash(2015 - 2016)
:crying::crying::crying::crying:
and second question. how long does it take to I receive the permission form the miui in official method of unlocking bootloader
sorry for my bad english:good:
Click to expand...
Click to collapse
It happened to me too. Tried many version of mi flash but it says error once hello packet and once not enough memory.
I was not able to boot up. I once again tried it.
Opened PC booted into edl mode. Flashed the ROM by proper settings by mi flash. It again showed error. Not enough memory. But this time I didn't turn my phone off. I straightly ran unlock bootloader.bat file and then flash twrp. Bat file. It worked and my phone rebooted into twrp. I wiped all data except microsd and flashed cm13 official because j need to boot up atleast. And now using it like charm flashing and installing any ROM of my choice
---------- Post added at 07:05 PM ---------- Previous post was at 07:01 PM ----------
This for other problem but may help you.
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
Yes even I got the same error when flashing fastboot ROM.. tried with older version of miflash... success... then use the batch files provided in the above post... everything will be fine..
One problem though fingerprint isn't working after flashing RR or any other custom ROM..
Related
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
redminote3 said:
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
Click to expand...
Click to collapse
But my pc dont see phone (mi pc suite , and mi flash ) .
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
still problem
redminote3 said:
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
Click to expand...
Click to collapse
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
innynizty said:
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
Click to expand...
Click to collapse
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
innynizty said:
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
Click to expand...
Click to collapse
which miflash version used for now? pls ensure you use 201604xx (64 bit only) or 20160830 (32/64 bit)
to flash device, already bunch of guide on guide section. pls do some research there.
to unlock your phone, you can follow below unofficial ways or official ways which require to apply to mi server
en.miui.com/thread-253680-1-1.html
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
innynizty said:
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
Click to expand...
Click to collapse
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
[email protected] said:
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
Click to expand...
Click to collapse
When i click on edl they only shows me " waiting for device" ?
innynizty said:
When i click on edl they only shows me " waiting for device" ?
Click to expand...
Click to collapse
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
[email protected] said:
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
Click to expand...
Click to collapse
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
innynizty said:
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
Click to expand...
Click to collapse
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
[email protected] said:
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
Click to expand...
Click to collapse
I cant turn on my phone and enable nothink , i know how to root phone and other .
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
[email protected] said:
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
Click to expand...
Click to collapse
I try to install miui and then my phone stuck in xiaomi logo ;/
innynizty said:
I try to install miui and then my phone stuck in xiaomi logo ;/
Click to expand...
Click to collapse
It means it has no ROM installed now....
Even without that turning on you could boot into edl and unlock and flash twrp..
Don't know... Try again and search on net.. Now
Im also facing same issue???
Sent from my ASUS_T00J using Tapatalk
Do like people write before and Its easy to repair, Thanks boys
hey there!
i need some help here please!
i was trying to unlock my bootloader (using this guide) and it went all fine till step 17 (command "fastboot oem unlock-go"), it said i got no permission for unlocking. and now i'm stuck here. the only thing that works is fastboot mode. from there i can switch to adb using the reboot-to-edl-patch, but then i'm stuck again. device-manager shows device as usual (ports COM & LPT) and the red light is blinking, but command "adb devices" replies an empty list. tried "adb kill-server", replugging phone, rebooting computer, still the same.
so what can i do now?
thanks for helping!
Hi. You can install a fastboot rom in edl-mode with mi flash. I recomend a developer rom for this action. Then you can try the unofficial unlock from the start, but i recomend the official unlock.
Odatosz said:
Hi. You can install a fastboot rom in edl-mode with mi flash. I recomend a developer rom for this action. Then you can try the unofficial unlock from the start, but i recomend the official unlock.
Click to expand...
Click to collapse
sorry, forgot to say that miflash does not show the device after i selected the rom. i need to do something before i can flash via edl-mode. but what?
Make sure that you have the correct drivers installed on a 64bit machine, with driver signature off. And you cant get adb device list from there, so thats normal. Try to install the 7.1.8 fastboot rom that should work.
Well even m in a same situation.... as u said ur mobile is giving u red led blinks.. ..
And in device Manger ur fone is showed as Qualcomm 900E instead of 9008 and that's the reason adb couldn't list ur device
All u need to do is do a Google search - xiaomi deep flash cable
shetty_chadda said:
Well even m in a same situation.... as u said ur mobile is giving u red led blinks.. ..
And in device Manger ur fone is showed as Qualcomm 900E instead of 9008 and that's the reason adb couldn't list ur device
All u need to do is do a Google search - xiaomi deep flash cable
Click to expand...
Click to collapse
phone is showed as showed as Qualcomm 9008, and meanwhile i'm able to flash fastboot-rom again. still can't unlock though
AnF replies: FAILED: <remote: oem unlock is not allowed>
finished. total time: 0.016s
drivers are installed correctly, i'm working in signature-off-mode.
tried 7.1.8 rom, can't unlock that either..
maybe a stupid question, but anyway: phone had miui version 8 before i started trying to unlock.. is something wrong with that?
thanks for helping!
no1dev said:
phone is showed as showed as Qualcomm 9008, and meanwhile i'm able to flash fastboot-rom again. still can't unlock though
AnF replies: FAILED: <remote: oem unlock is not allowed>
finished. total time: 0.016s
drivers are installed correctly, i'm working in signature-off-mode.
tried 7.1.8 rom, can't unlock that either..
maybe a stupid question, but anyway: phone had miui version 8 before i started trying to unlock.. is something wrong with that?
thanks for helping!
Click to expand...
Click to collapse
There is no problem with miui 8. You just have to follow the steps from this post: [Tips and Tutorials] Redmi Note 3 [ SnapDragon ] - Unlock the BEAST in Seconds!!! . Just google it, because i cant post links here... Make a efs partition backup before you proceed! With a bad flash you can lose your IMEI like lots on the forum did... I would say to unlock your phone with the official unlock. Good luck!
no1dev said:
phone is showed as showed as Qualcomm 9008, and meanwhile i'm able to flash fastboot-rom again. still can't unlock though
AnF replies: FAILED: <remote: oem unlock is not allowed>
finished. total time: 0.016s
drivers are installed correctly, i'm working in signature-off-mode.
tried 7.1.8 rom, can't unlock that either..
maybe a stupid question, but anyway: phone had miui version 8 before i started trying to unlock.. is something wrong with that?
thanks for helping!
Click to expand...
Click to collapse
Odatosz said:
There is no problem with miui 8. You just have to follow the steps from this post: [Tips and Tutorials] Redmi Note 3 [ SnapDragon ] - Unlock the BEAST in Seconds!!! . Just google it, because i cant post links here...
Click to expand...
Click to collapse
en.miui.com/thread-253680-1-1.html
abihary said:
en.miui.com/thread-253680-1-1.html
Click to expand...
Click to collapse
There you go. Don't forget to read my edit from the other post!
Odatosz said:
There you go. Don't forget to read my edit from the other post!
Click to expand...
Click to collapse
tried that, but no success in unlocking. same reply as mentoined above (FAILED: <remote: oem unlock is not allowed>)
is there any other rom i could try to flash? not to unlock the bootloader afterwards, but to just unbrick my phone?
I would recomend to install a global developer rom for now. And unlock your bootloader with the official method.
---------- Post added at 07:13 PM ---------- Previous post was at 07:09 PM ----------
Just install a developer ROM like you did before. Then you can decide what to do next. I would recommend to unlock your bootloader officially if you want custom ROMs on your phone.
good news: i finally managed to unbrick it!
flashing the fastboot 7.1.8 rom, and then flashing the original emmc_appsboot.mbn file via fastboot:
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot reboot
during reboot holding volume-up + power and starting mi pc suite
..and suddenly it's unbricked!
so happy right now!
Glad to hear that.
no1dev said:
hey there!
i need some help here please!
i was trying to unlock my bootloader (using this guide) and it went all fine till step 17 (command "fastboot oem unlock-go"), it said i got no permission for unlocking. and now i'm stuck here. the only thing that works is fastboot mode. from there i can switch to adb using the reboot-to-edl-patch, but then i'm stuck again. device-manager shows device as usual (ports COM & LPT) and the red light is blinking, but command "adb devices" replies an empty list. tried "adb kill-server", replugging phone, rebooting computer, still the same.
so what can i do now?
thanks for helping!
Click to expand...
Click to collapse
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
Is there any way around to root redmi note 3 on android 7.1 by santosh m without breaking sensors
Have u tried phh's superuser?
Rishabh1x said:
Have u tried phh's superuser?
Click to expand...
Click to collapse
Please pm me link
devabhi said:
Is there any way around to root redmi note 3 on android 7.1 by santosh m without breaking sensors
Click to expand...
Click to collapse
This may give you method for rooting...
And for installing cm13 ROM too... With proof...
It worked for me .. I did the same...
First
download the required files from the given link: [50mb]
[https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
---------- Post added at 05:19 PM ---------- Previous post was at 05:17 PM ----------
[/COLOR]Do the above method till rooting and installing TWRP.
If you want to install cm14.1 for redmi note 3:
Follow this thread:
http://forum.xda-developers.com/red...mod-14-0-xiaomi-redmi-note-3-t3459382/page330
Is it possible to root using phone itself?
pls can this be used on redmi note 3 pro with global stable rom on android 5.1.1 ...
ThX
Alright, this can be a noob-ish question but just wanted to ask if we can unlock the bootloader unofficially by wiping data of current rom and then directly using the fastboot flash *bootlader* command?
Proper Unofficial method suggests the internal storage wipe too, which i don't want.. so is this possible?
Manan44 said:
Alright, this can be a noob-ish question but just wanted to ask if we can unlock the bootloader unofficially by wiping data of current rom and then directly using the fastboot flash *bootlader* command?
Proper Unofficial method suggests the internal storage wipe too, which i don't want.. so is this possible?
Click to expand...
Click to collapse
I have the file for unlocking bootloader and installing twrp without voiding your warranty and loosing data...
Its unofficial but works well for me
I will be uploading it. With full instructions.
Wait for some days
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
[email protected] said:
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
Click to expand...
Click to collapse
Thanks for this, but i already have twrp and root.. just wanted to unlock bootloader as i flashed a MM aosp rom which relocked the bootloader.. so will the unlock bootloader bat file alone do the job???
Manan44 said:
Thanks for this, but i already have twrp and root.. just wanted to unlock bootloader as i flashed a MM aosp rom which relocked the bootloader.. so will the unlock bootloader bat file alone do the job???
Click to expand...
Click to collapse
Yes may be... But do it after getting your phone into edl mode
help
[email protected] said:
The solution is here:
download the required files from the given link: [50mb]
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
and GAPPS:
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
Hi.what can i do if i can't open the phone to allow oem unlocking and usb debugging and windows don't let me to go to test mode.
Click to expand...
Click to collapse
hi guys m new to redmi note 3 i applied for unlock 20 days back and i tried unlocking it on global developer build but stuck at 50% tried china developer rom still same problem even tried i.mi and shows location when phone on it shows blue color when phone switched off shows grey colour any solution for this?
or i need to flash lolipop rom？
I have the file for unlocking bootloader and installing twrp without voiding your warranty and loosing data...
Its unofficial but works well for me
I will be uploading it. With full instructions.
Wait for some days
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine