Is there any way around to root redmi note 3 on android 7.1 by santosh m without breaking sensors
Have u tried phh's superuser?
Rishabh1x said:
Have u tried phh's superuser?
Click to expand...
Click to collapse
Please pm me link
devabhi said:
Is there any way around to root redmi note 3 on android 7.1 by santosh m without breaking sensors
Click to expand...
Click to collapse
This may give you method for rooting...
And for installing cm13 ROM too... With proof...
It worked for me .. I did the same...
First
download the required files from the given link: [50mb]
[https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
---------- Post added at 05:19 PM ---------- Previous post was at 05:17 PM ----------
[/COLOR]Do the above method till rooting and installing TWRP.
If you want to install cm14.1 for redmi note 3:
Follow this thread:
http://forum.xda-developers.com/red...mod-14-0-xiaomi-redmi-note-3-t3459382/page330
Is it possible to root using phone itself?
pls can this be used on redmi note 3 pro with global stable rom on android 5.1.1 ...
ThX
Related
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
redminote3 said:
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
Click to expand...
Click to collapse
But my pc dont see phone (mi pc suite , and mi flash ) .
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
still problem
redminote3 said:
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
Click to expand...
Click to collapse
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
innynizty said:
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
Click to expand...
Click to collapse
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
innynizty said:
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
Click to expand...
Click to collapse
which miflash version used for now? pls ensure you use 201604xx (64 bit only) or 20160830 (32/64 bit)
to flash device, already bunch of guide on guide section. pls do some research there.
to unlock your phone, you can follow below unofficial ways or official ways which require to apply to mi server
en.miui.com/thread-253680-1-1.html
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
innynizty said:
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
Click to expand...
Click to collapse
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
[email protected] said:
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
Click to expand...
Click to collapse
When i click on edl they only shows me " waiting for device" ?
innynizty said:
When i click on edl they only shows me " waiting for device" ?
Click to expand...
Click to collapse
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
[email protected] said:
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
Click to expand...
Click to collapse
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
innynizty said:
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
Click to expand...
Click to collapse
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
[email protected] said:
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
Click to expand...
Click to collapse
I cant turn on my phone and enable nothink , i know how to root phone and other .
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
[email protected] said:
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
Click to expand...
Click to collapse
I try to install miui and then my phone stuck in xiaomi logo ;/
innynizty said:
I try to install miui and then my phone stuck in xiaomi logo ;/
Click to expand...
Click to collapse
It means it has no ROM installed now....
Even without that turning on you could boot into edl and unlock and flash twrp..
Don't know... Try again and search on net.. Now
Im also facing same issue???
Sent from my ASUS_T00J using Tapatalk
Do like people write before and Its easy to repair, Thanks boys
Alright, this can be a noob-ish question but just wanted to ask if we can unlock the bootloader unofficially by wiping data of current rom and then directly using the fastboot flash *bootlader* command?
Proper Unofficial method suggests the internal storage wipe too, which i don't want.. so is this possible?
Manan44 said:
Alright, this can be a noob-ish question but just wanted to ask if we can unlock the bootloader unofficially by wiping data of current rom and then directly using the fastboot flash *bootlader* command?
Proper Unofficial method suggests the internal storage wipe too, which i don't want.. so is this possible?
Click to expand...
Click to collapse
I have the file for unlocking bootloader and installing twrp without voiding your warranty and loosing data...
Its unofficial but works well for me
I will be uploading it. With full instructions.
Wait for some days
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
[email protected] said:
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
Click to expand...
Click to collapse
Thanks for this, but i already have twrp and root.. just wanted to unlock bootloader as i flashed a MM aosp rom which relocked the bootloader.. so will the unlock bootloader bat file alone do the job???
Manan44 said:
Thanks for this, but i already have twrp and root.. just wanted to unlock bootloader as i flashed a MM aosp rom which relocked the bootloader.. so will the unlock bootloader bat file alone do the job???
Click to expand...
Click to collapse
Yes may be... But do it after getting your phone into edl mode
help
[email protected] said:
The solution is here:
download the required files from the given link: [50mb]
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
and GAPPS:
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
Hi.what can i do if i can't open the phone to allow oem unlocking and usb debugging and windows don't let me to go to test mode.
Click to expand...
Click to collapse
hi guys m new to redmi note 3 i applied for unlock 20 days back and i tried unlocking it on global developer build but stuck at 50% tried china developer rom still same problem even tried i.mi and shows location when phone on it shows blue color when phone switched off shows grey colour any solution for this?
or i need to flash lolipop rom？
I have the file for unlocking bootloader and installing twrp without voiding your warranty and loosing data...
Its unofficial but works well for me
I will be uploading it. With full instructions.
Wait for some days
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine
hi guys
i have a problem
when i want to unlock my bootloader with this method
http://en.miui.com/thread-253680-1-1.html
i got this error 0x80070026 receiving Hello Packet error
my device bootloader id locked and i want to unlock it without permission from miui
how can i fix this error
every things in my pc is ok
the drivers is installed succesfuly-my windows is 7 x64
i can go to edl
and try 2 version of mi flash(2015 - 2016)
:crying::crying::crying::crying:
and second question. how long does it take to I receive the permission form the miui in official method of unlocking bootloader
sorry for my bad english:good:
booshveg said:
hi guys
i have a problem
when i want to unlock my bootloader with this method
http://en.miui.com/thread-253680-1-1.html
i got this error 0x80070026 receiving Hello Packet error
my device bootloader id locked and i want to unlock it without permission from miui
how can i fix this error
every things in my pc is ok
the drivers is installed succesfuly-my windows is 7 x64
i can go to edl
and try 2 version of mi flash(2015 - 2016)
:crying::crying::crying::crying:
and second question. how long does it take to I receive the permission form the miui in official method of unlocking bootloader
sorry for my bad english:good:
Click to expand...
Click to collapse
It happened to me too. Tried many version of mi flash but it says error once hello packet and once not enough memory.
I was not able to boot up. I once again tried it.
Opened PC booted into edl mode. Flashed the ROM by proper settings by mi flash. It again showed error. Not enough memory. But this time I didn't turn my phone off. I straightly ran unlock bootloader.bat file and then flash twrp. Bat file. It worked and my phone rebooted into twrp. I wiped all data except microsd and flashed cm13 official because j need to boot up atleast. And now using it like charm flashing and installing any ROM of my choice
---------- Post added at 07:05 PM ---------- Previous post was at 07:01 PM ----------
This for other problem but may help you.
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
Yes even I got the same error when flashing fastboot ROM.. tried with older version of miflash... success... then use the batch files provided in the above post... everything will be fine..
One problem though fingerprint isn't working after flashing RR or any other custom ROM..
After few day i find out solution how to install custom ROM to my Lenovo tablet. I think its first guide how to do it because every other guides were for TB2-X30F but not for TB2-X30L.
Installation guide:
FILES TO DOWNLOAD:
ALL FILES: https:// drive.google.com/drive/folders/1heVQAryphuXNVt5k-HsUhfRrVr9MV34D
ALL LINKS WORK ! JUST DELETE THE SPACE BEFORE drive.google.com...
1) On the tablet, at Settings, you must activate on the Developer Options the Bootloader Unlock (OEM unlocking) and USB debugging. Uncheck Verify apps over USB.
How to unlock Developer: https: //youtu.be/g5wkFAWDsg0
2) Download these files directly to your Android device, not to SD card.
a) https:// drive.google.com/file/d/1230xFbPA7DOGMhuX59yagEd6w1gNCI4o/view SuperSU-v2.79.zip (for me working only v2.79)
b) https:// drive.google.com/file/d/1vRW5RZixtNVfKbJ7nL2EUetANydfmLNg/view Gapps.zip (open_gapps-arm-7.1-micro-20180721)
b) https:// drive.google.com/file/d/13Mp8guzzOvb17s88IQyez_9reozpTNbw/view boot.img (from LiOS14-UNOFFICIAL-TB2-X30L)
3) Power off completely the tablet.
4) REMOVE SD CARD ! (because for me a part of system was installed on SD card).
5) Make sure you have a good cable so the connection between PC and tablet is perfect.
6) Download https: //drive.google.com/file/d/1XTDYs7kxagj-CXHsH_yyQnMXqYwAP_hK/view ADB and Fastboot to your PC .(here are the drivers too).
7) Unzip the zip archive and run with Administrator the apps from inside of the zip. To all the questions you must to press key Y to grant all the rights it needs.
8) Press and hold Volume up and plug in usb. Now you are in stock recovery menu.
9) From stock recovery select reboot to bootloader by using volume keys and power keys.
10) Wait about 5-10sec to tablet boot in bootloader mode. (shows lenovo logo in screen when ready)
11) Download the https:// drive.google.com/file/d/15IH55DgmD6SmlILjTukGeNcmYgUPcmCg/view recovery.img(its TWRP version for Lenovo Tab2 x30f so it wont work properly) and copy it into folder adb at local disk C (installed on step 7)
12) Run CMD with administrator and type cd C:\adb to select the adb folder.
13) In cmd type fastboot unlock-go and press enter. In case this command does not work, please try fastboot -s or fastboot oem unlock-go or fastboot oem unlock .
14) Flash recovery with command fastboot flash recovery recovery.img and then type fastboot boot recovery.img
15) From TWRP select Install and browse to emmc folder and then to your folder where you stored all files you downloaded.
(in bottom right corner you have Images... or Zips... here you can choose what type of file you want to install.
Install SuperSU-v2.79.zip
16) Now in menu select Wipe -> Advanced Wipe and check Dalvik Cache, Data and Cache. Wipe them.
17) Go back to menu and select Install. And install boot.img. At top of display check Boot and flash it.
19) Download https:// drive.google.com/file/d/1MlDxidIqLOZv_QZ91i8bsHgGdBMf7l9g/view LiOS14-UNOFFICIAL-TB2-X30L.zip and copy it into folder adb at local disk C (C:\adb).
18) Go to Menu select Advanced and open ADB Sideload. Go back to CMD on your pc and type
adb devices
If its your tablet properly connected you will see some letters and numbers and sideload. After that type
adb sideload LiOS14-UNOFFICIAL-TB2-X30L.zip
Now wait for finish the installation. If its installed corectly you will see Succesful at the top.
19) Repeate step number 15 and again install SuperSU-v2.79.zip (In installation you will see Boot image patcher)
20) Unplug your tablet from PC. And reboot it. First reboot may take 5-10 minutes and can reboot few times. DO NOT INTERRUPT THIS PROCESS.
21) After first start (set language, date..) Turn off devices.
22) Power on devices to recovery mode
(Press continuously the volume up and power key. When the screen on the tablet has started, release the power key and keep pressing the volume up key)
23) Now select again Install and install Gapps (open_gapps-arm-7.1-micro-20180721.zip). Then reboot it.
Now you have installed LiOS14-UNOFFICIAL (Android 7.1), with all stock apps(gapps) and also rooted device.
this is exactly what i was looking for 3 weeks ago. my sister asked if i could have a look at her old tablet. i managed to do it by translating myself through some russian forums. btw. does netflix work? on my sisters one it does not atm. i guess the play protect thing.
binocchio said:
this is exactly what i was looking for 3 weeks ago. my sister asked if i could have a look at her old tablet. i managed to do it by translating myself through some russian forums. btw. does netflix work? on my sisters one it does not atm. i guess the play protect thing.
Click to expand...
Click to collapse
You need to download apk from Netflix site.
https:// help.netflix.com/en/node/57688
direct link to apk
https:// netflixhelp.s3.amazonaws.com/netflix-4.16-200217-release.apk
mutrin said:
You need to download apk from Netflix site.
https:// help.netflix.com/en/node/57688
direct link to apk
https:// netflixhelp.s3.amazonaws.com/netflix-4.16-200217-release.apk
Click to expand...
Click to collapse
my sister is very grateful
Thank you very much.
What build date has this rom? Sec. patches?
Can you please post your local manifest?
Very interesting guide, unfortunately the links don't work...
Is it possible to restore them?
Tanks. Max
I think its first guide how to do it because every other guides were for TB2-X30F but not for TB2-X30L.
I have only found lineage os for x30l, can someone please link lineage (Android 7) for x30f?
The difference between L and F is that L is the sim card variant. Ive read several people getting "insert sim card" when installing L on a F tablet. So I dont want messages like this.
Thanks for this tutorial. It was possible, to upgrade this old Tablet.
Do you know, if there is anything newer version for our Lenovo?
mutrin said:
After few day i find out solution how to install custom ROM to my Lenovo tablet. I think its first guide how to do it because every other guides were for TB2-X30F but not for TB2-X30L.
Installation guide:
FILES TO DOWNLOAD:
ALL FILES: https:// drive.google.com/drive/folders/1heVQAryphuXNVt5k-HsUhfRrVr9MV34D
1) On the tablet, at Settings, you must activate on the Developer Options the Bootloader Unlock (OEM unlocking) and USB debugging. Uncheck Verify apps over USB.
How to unlock Developer: https: //youtu.be/g5wkFAWDsg0
2) Download these files directly to your Android device, not to SD card.
a) https:// drive.google.com/file/d/1230xFbPA7DOGMhuX59yagEd6w1gNCI4o/view SuperSU-v2.79.zip (for me working only v2.79)
b) https:// drive.google.com/file/d/1vRW5RZixtNVfKbJ7nL2EUetANydfmLNg/view Gapps.zip (open_gapps-arm-7.1-micro-20180721)
b) https:// drive.google.com/file/d/13Mp8guzzOvb17s88IQyez_9reozpTNbw/view boot.img (from LiOS14-UNOFFICIAL-TB2-X30L)
3) Power off completely the tablet.
4) REMOVE SD CARD ! (because for me a part of system was installed on SD card).
5) Make sure you have a good cable so the connection between PC and tablet is perfect.
6) Download https: //drive.google.com/file/d/1XTDYs7kxagj-CXHsH_yyQnMXqYwAP_hK/view ADB and Fastboot to your PC .(here are the drivers too).
7) Unzip the zip archive and run with Administrator the apps from inside of the zip. To all the questions you must to press key Y to grant all the rights it needs.
8) Press and hold Volume up and plug in usb. Now you are in stock recovery menu.
9) From stock recovery select reboot to bootloader by using volume keys and power keys.
10) Wait about 5-10sec to tablet boot in bootloader mode. (shows lenovo logo in screen when ready)
11) Download the https:// drive.google.com/file/d/15IH55DgmD6SmlILjTukGeNcmYgUPcmCg/view recovery.img(its TWRP version for Lenovo Tab2 x30f so it wont work properly) and copy it into folder adb at local disk C (installed on step 7)
12) Run CMD with administrator and type cd C:\adb to select the adb folder.
13) In cmd type fastboot unlock-go and press enter. In case this command does not work, please try fastboot -s or fastboot oem unlock-go or fastboot oem unlock .
14) Flash recovery with command fastboot flash recovery recovery.img and then type fastboot boot recovery.img
15) From TWRP select Install and browse to emmc folder and then to your folder where you stored all files you downloaded.
(in bottom right corner you have Images... or Zips... here you can choose what type of file you want to install.
Install SuperSU-v2.79.zip
16) Now in menu select Wipe -> Advanced Wipe and check Dalvik Cache, Data and Cache. Wipe them.
17) Go back to menu and select Install. And install boot.img. At top of display check Boot and flash it.
19) Download https:// drive.google.com/file/d/1MlDxidIqLOZv_QZ91i8bsHgGdBMf7l9g/view LiOS14-UNOFFICIAL-TB2-X30L.zip and copy it into folder adb at local disk C (C:\adb).
18) Go to Menu select Advanced and open ADB Sideload. Go back to CMD on your pc and type
adb devices
If its your tablet properly connected you will see some letters and numbers and sideload. After that type
adb sideload LiOS14-UNOFFICIAL-TB2-X30L.zip
Now wait for finish the installation. If its installed corectly you will see Succesful at the top.
19) Repeate step number 15 and again install SuperSU-v2.79.zip (In installation you will see Boot image patcher)
20) Unplug your tablet from PC. And reboot it. First reboot may take 5-10 minutes and can reboot few times. DO NOT INTERRUPT THIS PROCESS.
21) After first start (set language, date..) Turn off devices.
22) Power on devices to recovery mode
(Press continuously the volume up and power key. When the screen on the tablet has started, release the power key and keep pressing the volume up key)
23) Now select again Install and install Gapps (open_gapps-arm-7.1-micro-20180721.zip). Then reboot it.
Now you have installed LiOS14-UNOFFICIAL (Android 7.1), with all stock apps(gapps) and also rooted device.
Click to expand...
Click to collapse
I have followed the instructions and successfully installed LiOS14. Then, however, I have factory reset the tablet via Settings. Now it always boots to TWRP, no matter what I have tried I could not installed back the LiOS14 I only have TWRP right now.
Any help?
Boyalikus said:
I have followed the instructions and successfully installed LiOS14. Then, however, I have factory reset the tablet via Settings. Now it always boots to TWRP, no matter what I have tried I could not installed back the LiOS14 I only have TWRP right now.
Any help?
Click to expand...
Click to collapse
Same here
For me, this worked:
Lg v20 keeps booting to twerp recovery after factory reset. Megarom
Really not loving this phone and this rom. After learning I can't return to stock. Decided to factory reset it andoesn't then it boots directly to twerp recovery. Do did the first factory recovery from within the phone. Then after it booted into...
forum.xda-developers.com
The tablet can also run on LineageOS 16 which is Android 9.
As I saw that the guys in the Russian 4PDA-Forum had been able to create a LiOS16, I was able to make some adjustments and compile a ROM with most recent security patches which now runs on my good old TB2-X30L / TAB2 A10-30:
lineage-16.0-20210328-UNOFFICIAL-TB2-X30L.zip | by kenschbacher9 for 10
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
it seems that google drives are off. Can someone re-upload please?
Hallo,
I have installed LiOS14-UNOFFICIAL-TB2-X30L.zip. The installation was without problems.
But I am having problem with WiFi - problem of MAC 02:00:00:00:00:00. I have tried a lots of tips but nothig worked. Two times I was succesfull to set some MAC, but always, after while, it was gone. No able to reproduce to set.
Is it really so difficult to set somehow the MAC addres for the WiFi?
As I understand the setting of the MAC differs between different releases of OS. Does anybody know how it work in this release? It should by known where this relaese expects the MAC setting. Am I right?
1. temporary succes: Setting MAC in system/etc/firmware/wlan/qca_cld/wlan_mac.bin (I think. Its longer time ago and there was more attempts). It lasted for few months. It is not mine device so I don't know how it was handled.
2. temporary succes: I copied system/etc/firmware/wlan dir to system/vendor/firmware/wlan. I did it based on how it is in Samsung Galaxy S4 mini with Lineage 16. It worked. After restart I had to swith off and on the airplane mode to set MAC. After few attempts it was gone. No able to reproduce to set the MAC.
I am not Linux expert
nonicktoday said:
The tablet can also run on LineageOS 16 which is Android 9.
As I saw that the guys in the Russian 4PDA-Forum had been able to create a LiOS16, I was able to make some adjustments and compile a ROM with most recent security patches which now runs on my good old TB2-X30L / TAB2 A10-30:
lineage-16.0-20210328-UNOFFICIAL-TB2-X30L.zip | by kenschbacher9 for 10
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Thank you very much, install your rom on my TB2-X30F and it goes very well, the only drawback that I present is that the wifi is very slow but the rom is excellent, thank you very much for your work.
palamaro said:
it seems that google drives are off. Can someone re-upload please?
Click to expand...
Click to collapse
it still work. u just need to remove the space between htttp:// AND drive.google.com...
nonicktoday said:
The tablet can also run on LineageOS 16 which is Android 9.
As I saw that the guys in the Russian 4PDA-Forum had been able to create a LiOS16, I was able to make some adjustments and compile a ROM with most recent security patches which now runs on my good old TB2-X30L / TAB2 A10-30:
lineage-16.0-20210328-UNOFFICIAL-TB2-X30L.zip | by kenschbacher9 for 10
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Hi all, I've been trying to install the L16 version but I cannot install gapps or any zip from twrp. What is the procedure to install it correctly?
Boyalikus said:
I have followed the instructions and successfully installed LiOS14. Then, however, I have factory reset the tablet via Settings. Now it always boots to TWRP, no matter what I have tried I could not installed back the LiOS14 I only have TWRP right now.
Any help?
Click to expand...
Click to collapse
removing battery worked for me
Ive tried this tutorial and i bricked my tablet (i didn t backup the original firmware ) but i learned something new
for everybody who bricked their tablets lenevo tab 2 tb2 x30L do this:
1.first install Qualcomm_USB_Driver_v1.0 https://androiddatahost.com/nbyn6
2.install qfill 2.0.0.5 https://mydevfiles.com/download/qfil-tool-v2-0-0-5/
3.in qfill select flat build , progammer path is where you have your stock rom and load content same thing
4.press volume up +volume down and power button at the same time on your tablet *screen should be black*
5.press download content in qfil as soon as you connect the tablet to pc
stock firmware https://firmwarefile.com/lenovo-tab-2-tb2-x30l
^ english is not my first language so sorry for mistakes ^
[DELETED]
mutrin said:
After few day i find out solution how to install custom ROM to my Lenovo tablet. I think its first guide how to do it because every other guides were for TB2-X30F but not for TB2-X30L.
Installation guide:
FILES TO DOWNLOAD:
ALL FILES: https:// drive.google.com/drive/folders/1heVQAryphuXNVt5k-HsUhfRrVr9MV34D
ALL LINKS WORK ! JUST DELETE THE SPACE BEFORE drive.google.com...
1) On the tablet, at Settings, you must activate on the Developer Options the Bootloader Unlock (OEM unlocking) and USB debugging. Uncheck Verify apps over USB.
How to unlock Developer: https: //youtu.be/g5wkFAWDsg0
2) Download these files directly to your Android device, not to SD card.
a) https:// drive.google.com/file/d/1230xFbPA7DOGMhuX59yagEd6w1gNCI4o/view SuperSU-v2.79.zip (for me working only v2.79)
b) https:// drive.google.com/file/d/1vRW5RZixtNVfKbJ7nL2EUetANydfmLNg/view Gapps.zip (open_gapps-arm-7.1-micro-20180721)
b) https:// drive.google.com/file/d/13Mp8guzzOvb17s88IQyez_9reozpTNbw/view boot.img (from LiOS14-UNOFFICIAL-TB2-X30L)
3) Power off completely the tablet.
4) REMOVE SD CARD ! (because for me a part of system was installed on SD card).
5) Make sure you have a good cable so the connection between PC and tablet is perfect.
6) Download https: //drive.google.com/file/d/1XTDYs7kxagj-CXHsH_yyQnMXqYwAP_hK/view ADB and Fastboot to your PC .(here are the drivers too).
7) Unzip the zip archive and run with Administrator the apps from inside of the zip. To all the questions you must to press key Y to grant all the rights it needs.
8) Press and hold Volume up and plug in usb. Now you are in stock recovery menu.
9) From stock recovery select reboot to bootloader by using volume keys and power keys.
10) Wait about 5-10sec to tablet boot in bootloader mode. (shows lenovo logo in screen when ready)
11) Download the https:// drive.google.com/file/d/15IH55DgmD6SmlILjTukGeNcmYgUPcmCg/view recovery.img(its TWRP version for Lenovo Tab2 x30f so it wont work properly) and copy it into folder adb at local disk C (installed on step 7)
12) Run CMD with administrator and type cd C:\adb to select the adb folder.
13) In cmd type fastboot unlock-go and press enter. In case this command does not work, please try fastboot -s or fastboot oem unlock-go or fastboot oem unlock .
14) Flash recovery with command fastboot flash recovery recovery.img and then type fastboot boot recovery.img
15) From TWRP select Install and browse to emmc folder and then to your folder where you stored all files you downloaded.
(in bottom right corner you have Images... or Zips... here you can choose what type of file you want to install.
Install SuperSU-v2.79.zip
16) Now in menu select Wipe -> Advanced Wipe and check Dalvik Cache, Data and Cache. Wipe them.
17) Go back to menu and select Install. And install boot.img. At top of display check Boot and flash it.
19) Download https:// drive.google.com/file/d/1MlDxidIqLOZv_QZ91i8bsHgGdBMf7l9g/view LiOS14-UNOFFICIAL-TB2-X30L.zip and copy it into folder adb at local disk C (C:\adb).
18) Go to Menu select Advanced and open ADB Sideload. Go back to CMD on your pc and type
adb devices
If its your tablet properly connected you will see some letters and numbers and sideload. After that type
adb sideload LiOS14-UNOFFICIAL-TB2-X30L.zip
Now wait for finish the installation. If its installed corectly you will see Succesful at the top.
19) Repeate step number 15 and again install SuperSU-v2.79.zip (In installation you will see Boot image patcher)
20) Unplug your tablet from PC. And reboot it. First reboot may take 5-10 minutes and can reboot few times. DO NOT INTERRUPT THIS PROCESS.
21) After first start (set language, date..) Turn off devices.
22) Power on devices to recovery mode
(Press continuously the volume up and power key. When the screen on the tablet has started, release the power key and keep pressing the volume up key)
23) Now select again Install and install Gapps (open_gapps-arm-7.1-micro-20180721.zip). Then reboot it.
Now you have installed LiOS14-UNOFFICIAL (Android 7.1), with all stock apps(gapps) and also rooted device.
Click to expand...
Click to collapse
Will this work with x30F?