Enable always on Internet disabled - Some problems reconnecting on wake - Hero, G2 Touch Q&A, Help & Troubleshooting

Hi all,
In an attempt to improve battery life I have disabled the above and for my use (no push email etc) it seems to work great.
Only issue I am having (around once every two days) is that when I turn the screen on the data connection does not kick in. Sometimes Flightmode on then off sorts this but sometimes phone has to be rebooted.
Has anyone else using this setting found this and either found a permanent fix or at least found a reliable way to get mobile data to kick in without rebooting the phone.
Thanks,
Michael

sometimes when i disable internet connection & later when i enable it again its taking so long time .. i have to reboot phone but now i just disable air plane mod and i enable it again so, its works now without reboot

Related

Sprint Touch Pro data connection issues

I've owned a Touch Pro for a few months now and overall it's a good device. It has its quirks, but then again what phone doesn't? There is one problem in particular, however, that I can't seem to figure out. I've searched up and down in XDA Forums, and on Google, and I just can't find out a fix for my data connection always turning on for no reason. I have all my e-mail accounts set to "manual send / recieve", the weather program set to "update weather manually", and as far as I know there are no other programs on my phone that have access to the internet without my permission.
The problem I have is sometimes I will wake my phone up from its sleep mode, and I will discover that the data connection is active and appearing to be transmitting. Also, EVERY time I restart my phone and it goes through the boot process, the data connection will re-activate even before TouchFLO 3D opens up on the today screen. It's really annoying, because I have no idea what's causing it to do this, or why it does it at random times, or whenever I reset my device.
Does anyone have any solutions to this problem? I hate having to manually go in periodically and make sure my data connection is set to "off", instead of having it stay that way when I set it.
So no help on this one then?
I don't have a solution but I can help by bumping your thread and saying I have the same problem on Verizon. I was at a friend's place all weekend, and he has wifi all over, so I turned off data and used his wifi instead. Well sure enough all weekend my data connection kept turning itself back on. It seemed to happen only when going into sleep mode. So I kept the phone plugged in so it would never totally "sleep". Wifi stayed connected with no data connection starting automatically. Annoying especially considering the 5 GB data limit on the PDA plan.
Well I'm glad I'm at least not alone on this one. It's weird too that even though your device is on a different carrier, it still does the same thing. I wonder if it's a hardware issue?
I know that someone has to have an answer for this...
go into pocket express and press menu then go to express settings then on the top left theres a pulldown press it and go into auto updates and turn it off.. pissed me off when i got the phone.. couldnt find a fix till i started going through all the programs to find the one doing it.. and it was the stupid Pocket Express
I have had my MDA Compact V for a few months now, and it's only recently that I've had the same problem. Each time I switch on, my data connection starts or alternatively if I loose signal then get it back then I see my data connection is on again. Thankfully I have the Solo 20 package with unlimited net usage (although you're are limited to 1Gb/month) but it drains my battery really badly.
I went through every possible setting and program to switch off location settings or auto downloads/updates and I still have the same problem, but I downloaded Data Controller v1.00 from Freewarepocketpc.net and I can toggle my data connection on or off as I please.
Heres what you need
Install below cab, then use the NODATA app, select what you want off, PHONE AS MODEM and DATA are your two options I believe... Your data will never come back on... until you re-enable it that is....
PS... THIS IS NOT MY CAB, THIS IS SOMETHING I FOUND WHEN TRYING TO ADDRESS THESAME PROBLEM YOU ARE HAVING. THIS CAB WAS DOWNLOADED FROM MoDaCo BUT I DONT HAVE THE LINK... ALL RESPECTS GO TO HIM... I AM JUST SHARING WHAT HAS WORKED FOR ME IN THE PAST...
Seems it's one or the other
What sucks is on my Sprint HTC touch pro 2 (cdma), I was having a problem where I couldn't answer calls all the time, but sometimes I could, and eventually found that it was always when the data connection was showing active is when I couldn't answer a call. But when that was happening, my data connection would turn back off after a few seconds when I was done using it. It was driving me crazy not being able to answer my calls and I finally found a post that let me correct that problem, it was changing the HKLM\Comm\ConnMgr\Planner\Settings\SuspendResume value that fixed this problem... the value of this registry setting was originally "GPRS_bye_if_device_off". This setting made it so the data connection would turn off when not being used, but it apparently messes up cdma phones from being able to switch over to answer an incoming phone call if the data connection is active. I changed this registry entry to "#777" as the post said to do, and sure enough, that corrected the problem with being able to answer my calls if the data connection is active. I'm real happy to have that working now, but when I changed this setting, my data connection is now always showing active (white arrows showing in status) and even if I turn it off manually, it comes on by it's self way more often than the every 4 hours I have it set to check emails.
There is a registry setting called CacheTime under the same Settings key as the above mentioned registry entry that I changed, that when the "GPRS_bye_if_device_off" value is used, the CacheTime key value will indeed control how long the data connection stays on before automatically turning off. But When I change the Entry to "#777" which is necessary to allow me to answer calls when data is active, then changing the CacheTime value has no effect and the data connection stays on until you manually turn it off.
I'd like to find a way to turn the data connection off, while still not messing up me being able to answer calls when the data connection is active, and seems to me that if both of these things can be done separately with two different registry settings, that it must be possible to do both.... so if any of you tech wizards can find a way to do this, I'd love to see it!
Possible Fix?
Hey, I have noticed the same problem. It is annoying from a battery life aspect as well as a system slowdown when coming out of sleep. I could not find much of a workaround except one of the settings in TD3 Tools I installed. In the "Data Connection" tab you can yurn on an option that makes your "End" key also terminate an active data connections. So if you hit it after waking your phone you won't have the annoying slowdown with your Sense UI...

[Q] Turn off data connection ?

Can someone please help me on this ,i hardly use the the phone for browsing but when i check my phone i can see that the mobile web is connected even though the phone is locked and not in use (standby mode) ,i keep turning the data connection off but it keeps on turning itself back on .
1) Am i getting charged for this as it's connected to the web,i am on payg ?
2) Is there a way to dissable this until i want to turn it on manualy for browsing ?
Same with me, I would like to permanntly turn off data connection but it will always turn itserlf back on, chances are that if you are on pay as you go then you are being charged for it.
I would like you know if there is a way to actually turn off data connection since I'm going on holiday soon and don't want to come back to a huge phone bill cause my phone kept turning data on
in the UK data plans are generaly pay per byte, not time connected, so unless there is actual traffic you arent paying anything. Of course, teh fact that an app is making a connection means something is using data, though not necessarily constantly; the hd2 seems to have an inability to disconnect itself.
I use Dialup Enabler/Disabler
The auto disconnect can be a little hit and miss, (you have to leave it running for the timeout to work) however the on/off toggles work a treat. Once a data connection is disabled, it stays disabled.
Cheers for the link ,but reading through the posts it is not very usefull and only works sometimes, as you mentioned it is hit or miss ,is there anything else about ,i have done lots of searching but cant find anything else ?
yea the auto timeout is hit and miss, but the toggles work flawlessly, and you say you want to be able to turn it off till you want it back on, , which works fine.
Ive been using it for 5 or 6 months, and never once has it failed. (I dont use the timeout function, only the on/off toggles)

[Q] Wifi connection gets disabled on sleep...

I have a GTab runn Vegan 5.1 and it runs great. The one issue that I have is that my Wifi gets disabled each night when it goes to sleep. When I say "disabled" I do not mean this it disconnect, but rather that something is actually putting it into a "Disabled" state and I must select the connection and choose to enable it.
Does anyone have any thoughts on what could be doing this? I have dug through every setting I can think of and also looked at any apps that might be doing this. I even went so far as to remove all my battery saving apps, but no dice.
Any suggestions?
kmclaren said:
I have a GTab runn Vegan 5.1 and it runs great. The one issue that I have is that my Wifi gets disabled each night when it goes to sleep. When I say "disabled" I do not mean this it disconnect, but rather that something is actually putting it into a "Disabled" state and I must select the connection and choose to enable it.
Does anyone have any thoughts on what could be doing this? I have dug through every setting I can think of and also looked at any apps that might be doing this. I even went so far as to remove all my battery saving apps, but no dice.
Any suggestions?
Click to expand...
Click to collapse
Settings - Wireless - Wireless Settings - (Press Soft Menu Button, you will see Scan and Advanced buttons popup) - Advanced - Wifi Sleep Policy - Never
Still getting Wifi disabled...
MasterColdSoul said:
Settings - Wireless - Wireless Settings - (Press Soft Menu Button, you will see Scan and Advanced buttons popup) - Advanced - Wifi Sleep Policy - Never
Click to expand...
Click to collapse
Have the sleep policy set at never and this does not change anything. From what I understand this setting will disconnect wifi when the device goes to sleep. In my case the connection is not disconnected but rather completely disabled. So it seems that there is some other thing disabling the connection.
So, to give a bit more info here, I have installed wifi keep alive to try and save the connection. This keeps the wifi from being disabled when it is plugged in, but it still gets disabled when it sleeps and is also unplugged. (I.e. on battery and sleeping)
So, I am starting to think that the setting that fixes the problem while pluggedin is settings / applications / development / stay awake. I have this turned on and it seems that with stay awake and the wifi keep alive I am good when plugged in.
So, does anyone have thoughts for a similar setting when on battery power?
I can't help to much with battery power since I almost always have mine plugged in.
It's odd that not helping you, once I made that chance I stopped having my Wifi turn itself off (not sleep, off, and the tablet would need to be reset a lot).
Sorry that wasn't much help.
Having this problem as well. Anyone know how to fix?
If you notice other weird stuff happening in the future you may need to repartition your internal memory. Mine started with similar flubs and progressed to never remembering logins online. I had to login to xda every time I turned my device back on. Keep this in mind, about 30% of people need to reformat.
Sent from my Chromatic Magic using XDA Premium App
"WiFi stay alive" will help you!
Mantara said:
If you notice other weird stuff happening in the future you may need to repartition your internal memory. Mine started with similar flubs and progressed to never remembering logins online. I had to login to xda every time I turned my device back on. Keep this in mind, about 30% of people need to reformat.
Sent from my Chromatic Magic using XDA Premium App
Click to expand...
Click to collapse
can you give some info as to how one would go about doing this?
For what its worth, might help to set a fixed IP address. I often got a problem with Wifi not being able to reconnect because it got stuck on "getting an IP address" and failed to do so. I seem to remember it disabled the connexion to that AP after too many tries on my Nexus One.
On my g tablet, I was having what seemed to be the same problem, so I did the same thing and it seems stable since. Granted I didn't toy with it as much as I did on the N1, but I wouldn't be supprised if it were a general Android problem.
Anyways, its free to try.
The wireless uses a lot of power. When the tablet "sleeps", it should go into a power saving mode. Disabling the wireless is a feature, not a bug.
Either way how can I keep the wifi signal on so when i wake my g tab up the wifi is ready to go and does not have to reconnect?
anyone have anything to help with this?
I am not sure, but it seems to me that downloaded apps can play with wifi this way, as long as they have rights to "access internet, modify and bla-bla-bla".
I am having same problem after sleep. And it was not present from the beginning. It may starts after I upload some app. I will play with this after coming back home.
yes please let us know thank you!
wasserkapf said:
The wireless uses a lot of power. When the tablet "sleeps", it should go into a power saving mode. Disabling the wireless is a feature, not a bug.
Click to expand...
Click to collapse
When my tablet is plugged in and it goes to sleep, the Wifi also disconnects, so I don't think this is a feature any more than the screen angle issue is a "privacy feature." I've never had an Android device that powered down connectivity when the screen goes off, that totally negates the notification features. You basically have a comatose tablet after a few minutes of the screen being off.
I don't think the Xoom or Galaxy Tab have this problem, so there's definitely an issue. Sadly, I might be sending mine back to TigerDirect as faulty because of this.
I have this problem too. As others have said, the problem isnt that the wifi turns off when the tablet sleeps. The problem is the last connected access point gets disabled so when you wake, you have to go into settings and tell it to connect again.
In my case, it happens most of the time, but not always. My Android phone doesnt have this problem.
I did a factory reset, then used nvFlash to restore, and then did a fresh install of Vegan (thought it did the same on every other 2.2 ROM I tried). I didn't install any apps, and the problem still occurs. Tried using Wifi Fixer, and the problem still occurs (though on the bright side, it does reconnect about 10 seconds or so after waking).
I'm out of ideas. I hate to send this thing back because it's the most fun piece of tech I've had in years, but a comatose Android device is a dealbreaker Going to try a GB ROM, and then I give up.
I've got the same kind of issue. I lose my PSA key in my wireless settings every time and have to re-enter it.
I installed the Vegan GB ROM (along with pershoot's kernel), and the wifi stays on if you choose "Never" for wifi sleep (you have to hit the menu button and choose "Advanced" when you're in the wifi settings). Only problem is, the GB ROMs, while zippy, are a little raw right now, and my Launcher Pro GMail widget doesn't work
I'm going to try one of the 2.2 ROMs again today along with pershoot's Froyo kernel to see if it makes a difference.
Ok, YMMV, but I am using Calkukin's ROM with pershoot's kernel (was using Clemsyn's before), with wifi set to never sleep, and my wifi doesn't sleep any more. I left my phone and tab here at work while I went out for lunch (felt naked ...), and came back about 45 mins later, woke the tab, and wifi was still connected, without that "looks connected, oh the icon is now disconnected, oh it's back again!" bit.
I still receive notifications and email, and widgets update. Guess I'm keeping it

Battery drain when turning wifi or Data on after airplane mode

Hello experts,
I've been using my trusted S II for several years, when only half a year ago I rooted it and installed NeatROM on it (jellybean). Even before the rooting, probably after upgrading to the official jellybean, I was experiencing the following scenario:
I put the phone on airplane mode when I fly, or simply turn off both Wifi and Data (over 3g cellular network), so to reduce the battery consumption when I go to bed and don't want to be woken up by texts at 3am. I also turn off Sync option so that different apps (like gmail or calendar) won't wake up the device and try to connect to the internet every minute (and fail).
Then after a long period I turn on Data or wifi, and then - BOOM - a massive drain of the battery, which is accompanied by sluggishness in responses to me pressing the screen or even pulling down the status bar. It is as if all the apps that need an internet uplink - Facebook, Messenger, Whatsapp - wake up at once and try to get online together.
Does anyone else experiences this kind of effect? Is there a way to fix that?
Thanks in advance.

AUTO disconnecting

Hello,
Have any of you had a problem of auto disconnection with the application? I have already restored the factory settings several times and the problem still occurs maybe one of you had such a problem and could advise me how to deal with it, I don't get any notifications, which starts to irritate me
Regards
what device (model and ROM version) and what phone? Without any info about your setup it's very hard to try to help...
Anyway, the most common causes to connection issues are other app that may conflict with Amazfit app or kill it while in the background (check your phone settings) and Bluetooth/WiFi conflict. To test the later, disable all WiFi, put phone in Airplane mode then turn only Bluetooth on and see if connection gets better.
I have Stratos A1619 with PolishROM my phone is Huawei Mate 10 lite, but on any kind of ROM that problem occurs
Put your phone in Airplane mode and turn on only Bluetooth, make sure Amazfit app is open and running, confirm that watch is connected then move watch away from the phone. How far can you go without disconnecting? If it disconnects after just 30-50cm then most probably it's a hardware issue. But I'd recommend that you go entirely stock to test these things, it's hard to pinpoint anything using modified ROM.
Heey, you have options in that place where you can uninstall app, battery saving mode or optimization - sth like that. I have stratos and note9 and i have the same problem. Watch seems like have connection (top options at top left symbol phone with tick that means - connected to phone). But phone is saying disconnected. What helps - turn in airplane mode in watch, wait few seconds and turn airplane mode off.
But as i was saying - check battery optimization options and turn that function off in phone. If you are from Poland then write to me PM - i try to explain this in out native language

Categories

Resources