okay i am new to the HTC scene and i have read every thread i can well over 100 on how to sim unlock this phone Cingular 8125 G4 i ran lokiwiz3 and it gave me the 8 digit unlock code then i entered a Tmo sim and it is telling me
You have tried 6 times.
Please wait for retry.
what does this mean i never enter the code before am i doing something wrong or is this normal?
i ran lokiwiz without any sim in the phone does this make a difference?
Any solutions?
is there any impact?
Hello:
I can't unlock my M600 because when I put the unlock code, the screen changes to "Input SIM PIN", but when I put the SIM PIN, the screen go again to input unlock code (is a loop).
This is all steps that I have made:
1) M600 without SIM card inside, connected to ActiveSync. I execute Lokiwiz03a without problems, all ok, and I get my 8 digits unlock code.
2) Power off M600 and I put a SIM card of other company.
3) Power on M600 and I get: "Input your PIN code..."
4) I put the SIM code and after 4 seconds the screen changes to "Network Locked. Please input the unlock code".
5) I put the 8 digits unlock code and after 2 seconds the screen changes to Step 3 ("Input your PIN code..."), and when I put the PIN code, the screen changes to "Network Locked. Please input the unlock code"..., IS A LOOP!!.
I'm desperate, I don't know that I can do. I have make soft and hard reset but I have the same issue.
Please, I need help..., what can happen?, exists any alternative method for unlock my M600?.
Thanks for all!!
Fossy_01 said:
Hello:
I can't unlock my M600 because when I put the unlock code, the screen changes to "Input SIM PIN", but when I put the SIM PIN, the screen go again to input unlock code (is a loop).
This is all steps that I have made:
1) M600 without SIM card inside, connected to ActiveSync. I execute Lokiwiz03a without problems, all ok, and I get my 8 digits unlock code.
2) Power off M600 and I put a SIM card of other company.
3) Power on M600 and I get: "Input your PIN code..."
4) I put the SIM code and after 4 seconds the screen changes to "Network Locked. Please input the unlock code".
5) I put the 8 digits unlock code and after 2 seconds the screen changes to Step 3 ("Input your PIN code..."), and when I put the PIN code, the screen changes to "Network Locked. Please input the unlock code"..., IS A LOOP!!.
I'm desperate, I don't know that I can do. I have make soft and hard reset but I have the same issue.
Please, I need help..., what can happen?, exists any alternative method for unlock my M600?.
Thanks for all!!
Click to expand...
Click to collapse
If you have another SIM card try that. Also, try removing the SIM PIN on the current SIM card. (you'll need another phone/device)
Solved!.
I have restore the full original Orange Rom and unlock code was work!!.
If anyone have this problem, I reccommended install the original rom and try again.
Thanks!!
Fossy_01 said:
Solved!.
I have restore the full original Orange Rom and unlock code was work!!.
If anyone have this problem, I reccommended install the original rom and try again.
Thanks!!
Click to expand...
Click to collapse
I think it might be worthwhile putting that in the lokiwiz thread/wiki entry.
Sorry 3v5y, I'm searching the Lokiwiz forum but I can't find...
Please, tell me the direct link and I will put the issue with solution.
Thanks
Here's one link: http://wiki.xda-developers.com/index.php?pagename=Prophet_Unlock_Sim
Thanks I3v5y.
I have modified the wiki.
Please see the result (the lines in red color is the lines that I have added) and if you believe it is necessary, rewrite my text because I think that my english is not good...
Instructions for SIM Unlocking your Prophet :
1. Download ftp://xda:[email protected]-developers.com/Uploads/Prophet/Prophet-tools/Lokiwiz03a.zip
2. Unzip Lokiwiz03a.zip somewhere on your computer
3. Make sure that your phone is connected via ActiveSync with the computer
4. Execute lokiwizMSL.bat on your computer
If it states: "Could not update itsutils.dll to the current version, maybe it is in use?"
Do the following :
*Copy the cab's from the Utils folder in the Lokiwiz03a.zip file to your Prophet and execute them.
(There are two files : "Cert_SPCS.cab" and "EnableRapi.cab")
*Execute lokiwizMSL.bat on your computer
5. It will give you the SIM unlock code after it runs, write it down somewhere.
* In some cases, if you get characters (or characters and numbers), indicates that your phone-pda was ulocked.
6. Just get a different SIM from the one your phone is locked to, and install it in the phone (you have to turn off your phone)
7. Turn on your phone
8. When it asks your pin code enter your normal pin.
9. It then asks you for the Service Provider Unlock Code: Here you insert the SIM unlock code you wrote down in step 5.
* NOTE: If you have a non original ROM, you can have a problem with unlock code, because when you put it, the screen
returns to SIM PIN code, and when you put the pin code, the screen changes again asking for unlock code...,
if this is your case YOU MUST CHARGE THE ORIGINAL ROM IN YOUR PDA, in this case only with your original rom you can
unlock the pda-phone.
10. That's it, enjoy your unlocked Prophet !
I've tried all the methods in this forum but I can't unlock it, I ran Lockwiz 0.3 and it gave my a number, but when I turn on the phone it doesn't ask me for a unlock code, I've tried with two sims, one with PIN and the other without, when I put the one that has PIN code it ask me to enter it but when I do it tells me that it's a invalid sim and the screen stays at the pin code entering proccess, of course when I put cancel the phone says is "searching" all the time. When I put the other sim it doesn't ask for the unlock code either and also stays at searching all the time.
I've put the sims on other phones so I know that they're not the problem.
I had my g4 hard SPL with X2H'S WM6.5 (with Manila2D) - {Build 23001} rom, but now I removed the hard SPL so to see if this fixed the problem but it didn't...
I would be really grateful if someone could help me, I've read lots of threads but haven't found a similar problem.
i have lumia 710 from T-mobile US
i got my unlock code from my server
problem is phone asking for PUK ( on my sim PUK isn't active . not asking on other phone )
when i try to enter unlock code it always say "Incorrect PUK"
tried also my sim PUK but same result
any special idea ??
thnx
Hi,
Only if you have sfs backup from before you blocked the PIN. You need to restore,
and then enter the valid PIN you got.
BR
dun have any sfs back up
set came with this condition , i thought unlock code will solve ma problem and i bought unlock code but no luck
shazii said:
dun have any sfs back up
set came with this condition , i thought unlock code will solve ma problem and i bought unlock code but no luck
Click to expand...
Click to collapse
Hi,
I just been told in another forum that some networks provide PUK codes from
Nokia database. Maybe you can call the guys who sold you the PIN and ask for
PUK instead, not sure if it will work.
Regards
At some point in the past I setup an unlock code for my SIM card using ThunderShed (CM 7.2). I know the code, I have to enter it every time I reboot the phone (or come out of airplane mode). The situation is, the unlock code only works with the ThunderShed ROM. That sounds as weird to me as it does to you. Any other ROM I flash will not accept my unlock code. Even weirder, there is no option to remove the SIM unlock code in the Settings. "Location and security" is where it should be, but it isn't. So I cannot flash any other ROM w/o removing the SIM unlock code, and I cannot remove the SIM unlock code with my current ROM.
Any suggestions would be most welcome!