I unlocked my G3 easy..
Now I read you cant unlock a G4 and some say you can (for free that is)
All I need is a SIM unlock for my G4
Where is the cut to the chase post on Sim unlocking a G4.
Thanks,
Jason
Sorry if this is the elevendybillion post but my head is pounding from the yes no crap lol And this is my only phone
Ok here it is Instructions for SIM Unlocking your Prophet :
1. Download ftp://xda:[email protected]/Uploads/Prophet/Prophet-tools/Lokiwiz03a.zip
2. Unzip Lokiwiz03a.zip somewhere on your computer
3. Make sure that your phone is connected via ActiveSync with the computer
4. Execute lokiwizMSL.bat on your computer
If it states: "Could not update itsutils.dll to the current version, maybe it is in use?"
Do the following :
*Copy the cab's from the Utils folder in the Lokiwiz03a.zip file to your Prophet and execute them.
(There are two files : "Cert_SPCS.cab" and "EnableRapi.cab")
*Execute lokiwizMSL.bat on your computer
5. It will give you the SIM unlock code after it runs, write it down somewhere.
6. Just get a different SIM from the one your phone is locked to, and install it in the phone (you have to turn off your phone)
7. Turn on your phone
8. When it asks your pin code enter your normal pin.
9. It then asks you for the Service Provider Unlock Code: Here you insert the SIM unlock code you wrote down in step 5.
10. That's it, enjoy your unlocked Prophet !
It Took me for ever but i found it
??
hi
what if it says system could not find path specified
gvattes said:
hi
what if it says system could not find path specified
Click to expand...
Click to collapse
You are not following the instructions correctly or missing any step.Perhaps you are not pasting and executing the two files "Cert_SPCS.cab" and "EnableRapi.cab" correctly in your phone.Reread the guide again and do it correctly,ok
Cheers!
Unlock code does not wok
I have a Wizard G4. I have run Lokiwiz3a and it generated an eight digit unlock code. I have entered that code 4 times. It tells me the unlock code is not valid and I that I have tried 4 times. Wait and try again. Any suggestions, please?
Unlock code does not work
I have a Wizard G4. I have run Lokiwiz3a and it generated an eight digit unlock code. I have entered that code 4 times. It tells me the unlock code is not valid and I that I have tried 4 times. Wait and try again. Any suggestions, please?
Worked like a charm! Thanks a load!
THANKS a LOT
Excellent. Worked superb. Thanks a lot.
Just wanna say Thank You!
Hi!
Thanks for the great instructions, I also tried v2 but failed. ;-)
However due to you instructions it worked fine!
Now I still need to get rid of the branding - but that´s another story!
Anyway, MANY THANKS!!!
Alex.
Thank you
I have an MDA that has seen better days and got a Cingular 8125...I spent 5 hours reading boards about unlocking it...THANK YOU IT WORKED!!!
I've tried all the methods in this forum but I can't unlock it, I ran Lockwiz 0.3 and it gave my a number, but when I turn on the phone it doesn't ask me for a unlock code, I've tried with two sims, one with PIN and the other without, when I put the one that has PIN code it ask me to enter it but when I do it tells me that it's a invalid sim and the screen stays at the pin code entering proccess, of course when I put cancel the phone says is "searching" all the time. When I put the other sim it doesn't ask for the unlock code either and also stays at searching all the time.
I've put the sims on other phones so I know that they're not the problem.
I had my g4 hard SPL with X2H'S WM6.5 (with Manila2D) - {Build 23001} rom, but now I removed the hard SPL so to see if this fixed the problem but it didn't...
I would be really grateful if someone could help me, I've read lots of threads but haven't found a similar problem.
After I flash the Original TG01 Chinese (HongKong) ROM to my Softbank X02T. It's deadEach time, I power-up the device, It's only have a green LED flash and vibrate a single time.
After, I connect the Pin 1 & 2 by a wire and adhesive tape fixed, it can power-up and complete the set-up process to show Chinese WM6.5 . The SIM card still need password to connect the network......(blame the SIM lock program...). I can find the SimlockP.exe under the \Windows\ folder, but this file cannot be delete due to it stay in ROM location.
However, I find a serious problem is that, my battery cannot be recharged!! Even the battery used up, it cannot charge automatically! I need to pull out the battery each time and charge externally.
In additions, the PINs (3 large and 1 small) under the SIM slot may be the tricks to "Lock the phone to the exact Mobile company". Our discovery is that:
i, Pin - 1 & 2 connected >> can awake the X02T and T01A using TG01 ROM
ii, Pin - 1 & 3 connected >> flash the ROM file at *.enc format
iii, Pin - 2 & 3 connected >> tried but the function is unknow.
iv, Pin - 1 & 4 connected >> tried but the function is unknow.
It may be one of the hints for unlocking the X02T and T01A. Needed to further research.
Could you flash T01A UK rom from mr.mike after your device alive?
My phone is T01A and still waiting for unlocking
Anyway it is a good news for dead TG01.
If you want to bypass the sim unlock screen, you should try any custom 6.5 rom (it never show that screen) . However, I don't know that whether X02T is compatible with custom rom or T01A custom rom (TG01>T01A tool).
vincentbingkau said:
After I flash the Original TG01 Chinese (HongKong) ROM to my Softbank X02T. It's deadEach time, I power-up the device, It's only have a green LED flash and vibrate a single time.
After, I connect the Pin 1 & 2 by a wire and adhesive tape fixed, it can power-up and complete the set-up process to show Chinese WM6.5 . The SIM card still need password to connect the network......(blame the SIM lock program...). I can find the SimlockP.exe under the \Windows\ folder, but this file cannot be delete due to it stay in ROM location.
However, I find a serious problem is that, my battery cannot be recharged!! Even the battery used up, it cannot charge automatically! I need to pull out the battery each time and charge externally.
In additions, the PINs (3 large and 1 small) under the SIM slot may be the tricks to "Lock the phone to the exact Mobile company". Our discovery is that:
i, Pin - 1 & 2 connected >> can awake the X02T and T01A using TG01 ROM
ii, Pin - 1 & 3 connected >> flash the ROM file at *.enc format
iii, Pin - 2 & 3 connected >> tried but the function is unknow.
iv, Pin - 1 & 4 connected >> tried but the function is unknow.
It may be one of the hints for unlocking the X02T and T01A. Needed to further research.
Click to expand...
Click to collapse
many thanks for your update
could you share more detailed inform about how to flash a TG01 rom on X02T?
One more question
Did flashing TG01 Rom to your X02T change the radio rom version?
Short PIN unbricking works only if bootloader is ok if You kill bootloader(it's easy to do) then even shorting pin's method won't work...
with simlock try making a 0b text file name it SimlockP.exe and copy it to windows folder using pocket commander or resco explorer(file explorer can't do this) and try but I'm not sure if replacing this file will unlock phone but should take out nag screen or lead You to HR
nico101 said:
Short PIN unbricking works only if bootloader is ok if You kill bootloader(it's easy to do) then even shorting pin's method won't work...
with simlock try making a 0b text file name it SimlockP.exe and copy it to windows folder using pocket commander or resco explorer(file explorer can't do this) and try but I'm not sure if replacing this file will unlock phone but should take out nag screen or lead You to HR
Click to expand...
Click to collapse
useless
in my rom i deleted simlock apps
and it's helpless with unlock
ffboy2009 said:
useless
in my rom i deleted simlock apps
and it's helpless with unlock
Click to expand...
Click to collapse
When it jumped out window "Phone is blocked. Enter password to disable SIM lock.", try to connect the phone with PC through ActiveSync. If success, you can kill the process "SIMUnlockP.exe" using a phone management tool, then the "...Enter password..." window disappeared and it get back to normal WM interface.
But it does not mean Docomo or Softbank sim lock is removed. If the Radio is 5005.1901.xx or 5005.1908.xx, the Docomo or Softbank sim lock is still there.
last night, I brick my X02T(Softbank) .......
Can show me how to alive T01A by short pin 1 and Pin2, share for me your ROM to do, thanks
Here's the details of my procedure to awake my Softbank X02T>>>
1. Download the TG01 ROM (my version is original Hongkong ROM)
2. Place in the microSD folder /prg and rename the .tsw to .enc
3. Short pin 1 & 3 and press power button around 10 sec,
4. It will start the screen "Downloading" and wait around 10mins, it reboot and "Bricked"
5. Then, cut a short, thin bare copper wire, connect the Pin 1 and 2 (location from left - pin1 & right is Pin 2), using adhesive tape to fix it.
6. Press the power button, the phone will wake-up then proceed to Windows setup screen.
For T01A, I think the tricks may very similar to X02T and pls have feedback if anyone tried above steps on T01A, the phone awake or not.
The further findings are that:-
- Using Resco-explore cannot delete the "SIMUnlockP.exe". Any other method in details?
- Ref. to member "cktp", I thinks the radio version is the same and cannot be changed by Rom flashing.
- When I insert back the Softbank SIM, it cannot "unlock" and still ask me to enter the password (I don't know why?).
- I guess that if we can change the "Radio firmware", it might be the most effective way to Unlock the SIM. (because we cannot find the password!)
For those X02T and T01A members, we work together and never give-up !!!! Cheers!
vincentbingkau said:
- When I insert back the Softbank SIM, it cannot "unlock" and still ask me to enter the password (I don't know why?).
My phone is T01A. In oringal Japanese WM6.1, no "enter password" request when insert non-Docomo sim. After flashing to cooked WM6.5, "enter password" window will jump out when WM system start. I can not use any function of the phone since no password.
I tried nico101's method, creating an empty file, name it SimlockP.exe and copy to Windows directory to replace the orginal one using resco explorer. It works, no "enter password" window, and I can use WM system but there is no network signal at all. That is, it disable the PHONE CALL funtion, the phone is not finding any network.
In my way, connecting phone to PC, and kill the process "simunlockP.exe", "enter password" window will disapper, and phone is still finding network.
But it's very strange when you use Softbank sim it still ask for password. Becase my T01A with cooked 6.5 will not reqest for passord entering when I use Docomo accepted sim.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Thank for help, but T01A still dead, I tried short pin 1&3, and short Pin1&2 nothing happen, just vibrate and green light, no dowload.
I want know, where you put those file TG01_SDDL.exe and TG01_SDDL+.exe
Can you share for me your file that you tried success
thanhchaua6 said:
Thank for help, but T01A still dead, I tried short pin 1&3, and short Pin1&2 nothing happen, just vibrate and green light, no dowload.
I want know, where you put those file TG01_SDDL.exe and TG01_SDDL+.exe
Can you share for me your file that you tried success
Click to expand...
Click to collapse
my x02T no vibrate,no green light
just like a brick
The Help
Mybee i can help,
1 - download the ROM_TG01_Clone_HD2_Tmous_rel.2 (best ROM),
2 - use the TG01toT01A Converter for make a *.tsd file
3 - rename the file.tsd to TG01WP.tsd
4 - copy to SD card in normal PRG folder.
5 - Pin and flash.
Always work to me.
hi, i have download the Lokiwiz03 and i have sucefull the unclock code, but when i put the pin code in qtek 9100 after says UNKNOWN SIM STATUS and din´t ask the unlock code. with a different sim,if i disable the pin they starts and goes to home screen but is searching for network hour and hours
I have the WM 6.5 in this
Thanks
Flash back to an original ROM and try again.
hello....i've get the the unlock code but i have cyanogenmod and i don't know how to introduce it...
Guess you are referring to the SIM Unlock code.
You need to put a SIM card for another carrier and power up the phone, once you do this you will get prompted for the Unlock Code.
proimage said:
hello....i've get the the unlock code but i have cyanogenmod and i don't know how to introduce it...
Click to expand...
Click to collapse
I had this problem. Cyanogenmod does not prompt you for an unlock code when putting in a different sim.
You have to flash back to a stock rom, and then put in your unlock code. Then flash back to Cyanogenmod.
I have the same problem
masperdio said:
I have the same problem
Click to expand...
Click to collapse
As I said above, Cyanogenmod does not prompt you for an unlock code after putting in a SIM card from a different network.
You have to flash your phone back to a stock rom, boot up the phone with a different SIM, enter the unlock code, then flash back to Cyanogenmod.
I guess you can make a backup with Clockworkmod and then restore it afterwards. But I am not sure if the phone will be locked again.
Answer here:
This may help -
http://forum.xda-developers.com/showthread.php?p=22718405#post22718405
Temporary workaround for SIM Card prompt
I have the same issue with my Motorola Defy+ (CM 10.1.20130331-NIGHTLY-mb256) in Australia using Telstra
Here is a way to force the SIM card unlock prompt to appear.
1) Boot phone - no SIM unlock screen appears - no mobile signal available (Network Unavailable) - that's OK read on...
2) Go to Settings- Security - Screen Lock
3) Change your Screen Lock method - I've tried Swipe and Pattern - both work for me
4) Once I have set the new Screen lock method I am immediately prompted with the SIM card unlock prompt
5) I enter the SIM card unlock code and I have mobile signal
6) Change your Screen Lock method back to whatever you want it to be.
It's an annoying workaround, but at least you don't have to re-flash your phone to a stock ROM, enter the pin and then flash up to the latest mod again.
Hope this helps.