I unlocked my G3 easy..
Now I read you cant unlock a G4 and some say you can (for free that is)
All I need is a SIM unlock for my G4
Where is the cut to the chase post on Sim unlocking a G4.
Thanks,
Jason
Sorry if this is the elevendybillion post but my head is pounding from the yes no crap lol And this is my only phone
Ok here it is Instructions for SIM Unlocking your Prophet :
1. Download ftp://xda:[email protected]/Uploads/Prophet/Prophet-tools/Lokiwiz03a.zip
2. Unzip Lokiwiz03a.zip somewhere on your computer
3. Make sure that your phone is connected via ActiveSync with the computer
4. Execute lokiwizMSL.bat on your computer
If it states: "Could not update itsutils.dll to the current version, maybe it is in use?"
Do the following :
*Copy the cab's from the Utils folder in the Lokiwiz03a.zip file to your Prophet and execute them.
(There are two files : "Cert_SPCS.cab" and "EnableRapi.cab")
*Execute lokiwizMSL.bat on your computer
5. It will give you the SIM unlock code after it runs, write it down somewhere.
6. Just get a different SIM from the one your phone is locked to, and install it in the phone (you have to turn off your phone)
7. Turn on your phone
8. When it asks your pin code enter your normal pin.
9. It then asks you for the Service Provider Unlock Code: Here you insert the SIM unlock code you wrote down in step 5.
10. That's it, enjoy your unlocked Prophet !
It Took me for ever but i found it
??
hi
what if it says system could not find path specified
gvattes said:
hi
what if it says system could not find path specified
Click to expand...
Click to collapse
You are not following the instructions correctly or missing any step.Perhaps you are not pasting and executing the two files "Cert_SPCS.cab" and "EnableRapi.cab" correctly in your phone.Reread the guide again and do it correctly,ok
Cheers!
Unlock code does not wok
I have a Wizard G4. I have run Lokiwiz3a and it generated an eight digit unlock code. I have entered that code 4 times. It tells me the unlock code is not valid and I that I have tried 4 times. Wait and try again. Any suggestions, please?
Unlock code does not work
I have a Wizard G4. I have run Lokiwiz3a and it generated an eight digit unlock code. I have entered that code 4 times. It tells me the unlock code is not valid and I that I have tried 4 times. Wait and try again. Any suggestions, please?
Worked like a charm! Thanks a load!
THANKS a LOT
Excellent. Worked superb. Thanks a lot.
Just wanna say Thank You!
Hi!
Thanks for the great instructions, I also tried v2 but failed. ;-)
However due to you instructions it worked fine!
Now I still need to get rid of the branding - but that´s another story!
Anyway, MANY THANKS!!!
Alex.
Thank you
I have an MDA that has seen better days and got a Cingular 8125...I spent 5 hours reading boards about unlocking it...THANK YOU IT WORKED!!!
Related
Anyone has the free unlocker for the 3125 yet? Can you share it?
This has taken pretty long.
Thanks
Trini
You have to pay to get the phone carrier unlocked as there isn't a solution at the moment similar to the one created for the HTC Wizard...
http://www.imei-check.co.uk/f600unlock.php
Application unlocking so you can flash the ROM has been covered a couple of times (see response #2)
http://forum.xda-developers.com/showthread.php?t=292936
Good luck
you don't have to pay to cid unlock the phone... search this forum, or spv-dev's forum....
it's easy,
but, so you know, the files will be extracted to the folder specified in the cmd window (not necessarily the same folder were the itsmeutils are)
sim unlock is around too, but i don't have another sim to test it with
I have done cid unlock and it works fine. But, the phone is still sim locked.
I need some assistance in UNlocking my 8125. I sent my phone into at&t for repairs, they sent the phone back locked. I am an old ATTWS customer, I have been waiting for one week for my unlock code. I recently purchased an 8525 and SIM/CID Unlocked that phone, but I need assistance with this phone. I have run the lokiwiz03a several times, but it keeps giving me "The system cannot find the path specified" on all the lines of the program. Of course at the end it does not provide an unlock code, It repeats the message.
I think you are not doing it proper,I may be wrong,but most probably you have to copy and paste two cab files 'Cert_SPCS' and 'EnableRapi' in the phone somewhere and execute them in the phone,then after that run 'lokiwizMSL' on your pc.
Cheers!
I loaded both .cab files on the 8125, they both ran succesfully. I have the phone connected to active sync. I am at a loss on this. I have no clue why this is not working. I have flashed numerous ROM's on phones, this one seems to be a pain the in the behind. At&t just returned the phone from repairs, could they have installed something to block this?
hmmm,
really strange though,may be they have put some kinda special code on it.what repairs were carried on it ?
btw,have you tried to sim unlock with WST 4.2 tool,ask mestrini,if it might do the trick.
Cheers!
I ran the WST as you requested. It is telling me that the DOC chip is write protected. When I run the CID Action and Run Super CID it returns that message. When I run SIM unlock it generates all the data from the phone and produces LOCKED in the status. At the bottom of all the data it returns DOC chip is write protected. I may be running this tool wrong, your info is appreciated.
WST simlock tool doesn't work on G4.
Easiest way:
1. Run flight mode.
2. Turn off your Wizard and insert "bad" simcard.
3. Turn on your Wizzard copy Two cabs Cert_SPCS' and 'EnableRapi'
4. Install it on device memory.
5. Turn on phone (in commanager)
6. Run lokiwiz, it should work!
How do I turn on the phone with the wrong SIm in the phone, it keeps going back to the SIM lock page. I am able to turn on the flight mode, but I can not do anything else, it keep srefering back to the SIMlock page.
simlock screen = run lokiwiz and enter generated code. It must work
Everyline on the screen reports "The system cannot find the path specified" I think at&t has protected this from unlocking?
same happens to me
try running lokiwiz from c:\
make sure that two cabs are installed
wizard is an old model I think at&t is taking care over iphone now ;p
Hello:
I can't unlock my M600 because when I put the unlock code, the screen changes to "Input SIM PIN", but when I put the SIM PIN, the screen go again to input unlock code (is a loop).
This is all steps that I have made:
1) M600 without SIM card inside, connected to ActiveSync. I execute Lokiwiz03a without problems, all ok, and I get my 8 digits unlock code.
2) Power off M600 and I put a SIM card of other company.
3) Power on M600 and I get: "Input your PIN code..."
4) I put the SIM code and after 4 seconds the screen changes to "Network Locked. Please input the unlock code".
5) I put the 8 digits unlock code and after 2 seconds the screen changes to Step 3 ("Input your PIN code..."), and when I put the PIN code, the screen changes to "Network Locked. Please input the unlock code"..., IS A LOOP!!.
I'm desperate, I don't know that I can do. I have make soft and hard reset but I have the same issue.
Please, I need help..., what can happen?, exists any alternative method for unlock my M600?.
Thanks for all!!
Fossy_01 said:
Hello:
I can't unlock my M600 because when I put the unlock code, the screen changes to "Input SIM PIN", but when I put the SIM PIN, the screen go again to input unlock code (is a loop).
This is all steps that I have made:
1) M600 without SIM card inside, connected to ActiveSync. I execute Lokiwiz03a without problems, all ok, and I get my 8 digits unlock code.
2) Power off M600 and I put a SIM card of other company.
3) Power on M600 and I get: "Input your PIN code..."
4) I put the SIM code and after 4 seconds the screen changes to "Network Locked. Please input the unlock code".
5) I put the 8 digits unlock code and after 2 seconds the screen changes to Step 3 ("Input your PIN code..."), and when I put the PIN code, the screen changes to "Network Locked. Please input the unlock code"..., IS A LOOP!!.
I'm desperate, I don't know that I can do. I have make soft and hard reset but I have the same issue.
Please, I need help..., what can happen?, exists any alternative method for unlock my M600?.
Thanks for all!!
Click to expand...
Click to collapse
If you have another SIM card try that. Also, try removing the SIM PIN on the current SIM card. (you'll need another phone/device)
Solved!.
I have restore the full original Orange Rom and unlock code was work!!.
If anyone have this problem, I reccommended install the original rom and try again.
Thanks!!
Fossy_01 said:
Solved!.
I have restore the full original Orange Rom and unlock code was work!!.
If anyone have this problem, I reccommended install the original rom and try again.
Thanks!!
Click to expand...
Click to collapse
I think it might be worthwhile putting that in the lokiwiz thread/wiki entry.
Sorry 3v5y, I'm searching the Lokiwiz forum but I can't find...
Please, tell me the direct link and I will put the issue with solution.
Thanks
Here's one link: http://wiki.xda-developers.com/index.php?pagename=Prophet_Unlock_Sim
Thanks I3v5y.
I have modified the wiki.
Please see the result (the lines in red color is the lines that I have added) and if you believe it is necessary, rewrite my text because I think that my english is not good...
Instructions for SIM Unlocking your Prophet :
1. Download ftp://xda:[email protected]-developers.com/Uploads/Prophet/Prophet-tools/Lokiwiz03a.zip
2. Unzip Lokiwiz03a.zip somewhere on your computer
3. Make sure that your phone is connected via ActiveSync with the computer
4. Execute lokiwizMSL.bat on your computer
If it states: "Could not update itsutils.dll to the current version, maybe it is in use?"
Do the following :
*Copy the cab's from the Utils folder in the Lokiwiz03a.zip file to your Prophet and execute them.
(There are two files : "Cert_SPCS.cab" and "EnableRapi.cab")
*Execute lokiwizMSL.bat on your computer
5. It will give you the SIM unlock code after it runs, write it down somewhere.
* In some cases, if you get characters (or characters and numbers), indicates that your phone-pda was ulocked.
6. Just get a different SIM from the one your phone is locked to, and install it in the phone (you have to turn off your phone)
7. Turn on your phone
8. When it asks your pin code enter your normal pin.
9. It then asks you for the Service Provider Unlock Code: Here you insert the SIM unlock code you wrote down in step 5.
* NOTE: If you have a non original ROM, you can have a problem with unlock code, because when you put it, the screen
returns to SIM PIN code, and when you put the pin code, the screen changes again asking for unlock code...,
if this is your case YOU MUST CHARGE THE ORIGINAL ROM IN YOUR PDA, in this case only with your original rom you can
unlock the pda-phone.
10. That's it, enjoy your unlocked Prophet !
hello everybody
Yesterday my phone asked me to update and i accepted it unfortunately.
I live in France, phone is bought here blocked by SFR operator.
One year ago i got the code to unblock from SFR and I unblocked it and since then i have used FREE, COSMOTE(Greece) and lately i m using BOUYGUES operator.
Problem:
After the update, phone got simlocked again and with my BOUYGUES sim it asks me for a "sim network unlock pin". I insert the code i had but it doesn't unlock it.
I called SFR and fun fact is that they claim that the unlock is permanant (they are not aware of this new issue) and the unlock code unique. I asked them the code to ensure what i had is correct and they confirmed... So code is 100% correct...
Since it was not working they told me to remove any sim card from the phone and do the following steps...
1 click on TELEPHONE icon
2 enter *#46744674 and press #
3 the code should disappear
4 then enter #7465625*638* and press #
5 you will now be prompted to enter the unlock code
6 enter the code NCK and press ok OK.
if code is good, phone gets unlocked
So while step 2-3-4 work fine, the #7465625*638*# disappears but step 5 never happens... There is not screen prompting me to insert the code....
I called Samsung after this and I told them everything i ve tried...
they proposed me to do this --> *#0111*CODE# and it will get unlocked... (super unfriendly french customer service hanged up on me)
I did it but nothing happen.. not even the *#0111*CODE# got disappeared like it happened with steps 2-4 above....
To me it looks like the new android 4.1.2 messed up everything....
Problem seems new... i found two posts in french describing the same problem with no solution but i cant post the links here.
Any ideas how to fix this?
Thanks for reading this
Yeah, root it & unlock it.
Sent from the little guy
Root the phone and then use galaxsim_unlock app from " http://forum.xda-developers.com/showthread.php?t=1846451 " or u can download the app from play store!
Issue in process of rooting the phone - to unlock the phone
Hi,
I have similar problem with my Samsung Galaxy S II SGS2 GT-i9100.
My phone is UNROOTED.
After it was updated from ICS to Jellybean (upgrade via the air, not using Kies and not using Odin), I am also asked for SIM UNLOCK PIN.
The phone was originally bought locked to O2 UK network, then unlocked, but the unlock code used in past does not work now.
The problem is that in all places it says to root the device, and in order to root it, I am advised to create a backup copy of efs folder, and in order to backup the efs folder I need to have root permissions... - deadlock !
In additions, many guides says that in order to root the phone, I need to have only for phones that are SIM FREE, which brings me back to start - I will not be able to flush ROM/Kernel to root it as my phone is SIM locked...
Any suggestions that will help me unlock the phone?
Thanks!
dudders007 said:
Root the phone and then use galaxsim_unlock app from " http://forum.xda-developers.com/showthread.php?t=1846451 " or u can download the app from play store!
Click to expand...
Click to collapse
You're very confused.
1) Root your phone. There are multiple methods. Search/read/learn & choose whichever one you think is best for you. The phone does not have to be 'sim-free' or unlocked or anything else in order to root it. As I said, you are clearly confused. You need to search/read/learn & not do anything to your phone until you're no longer confused, or you'll 'break' it.
2) Create an EFS backup using kTool from Google Play. Keep one copy of this backup on your PC, and another copy on the external SD card in your phone if you have one.
3) Unlock the phone with whichever app you want to use to unlock it.
Hello
I found an easy way to root it but i cant post a link... so google "[RESOLU] code deverouillage reseau" and you ll see the thread... (it is in french)
As user "gab34" says, i downloaded the proper zip file (in my case was XWLSD_root.zip) and put it in the sd card as it is (as a zip). (you have to subscribe to let you download the file :/)
Then i pressed up-power-home buttons until it turns off and on again.
Then i was in the recovery meny , and with the volume button i went down to "apply update from external storage" i pressed the power button to enter, chose the file XWLSD_root.zip, press again power button, installation will take place in ../ , press power button, the reboot now and power button.
The phone restarts as rooted and then you can use GALAXSIM to unlock it..
You download Galaxsim unlock for free, then it tells you if it can unlock and if so you pay 3 euros for full version and unlock it....
Try google translator and a french speaker if you need help with the site... It took me 10 minutes to do it...
If not, try to google how to root easily like i did with just a zip file in the sd card...
Hope it helps
Thanks but we kinda know how to do that.
Please don't (try to) post a link from another site, those sites get the info from xda anyway.
Sent from the little guy
Hello
I purchased a brand new Samsung Galaxy Alpha Direct from Vodafone UK. My sim is under Orange/EE.
I purchased a NUC code from an unlocking vendor online. I entered the correct IMEI number as requested and received the code a few days later. I entered the code and received a message saying "Network request unlock unsuccessful."
Went through troubleshooting with the vendor and could not get it working. A refund was given.
I decided to Vodafone UK to have the phone unlocked direct through them as I thought maybe a dodgy code was given. I received my code yesterday, followed the instructions and again the same message appears.
I was growing tired with this so decided to take it to an independent experienced phone unlocker/repairer and explained the situation to him. I give him the code and he tried various different things and was baffled as this should be an easy process.
The phone is running android 4.4.4
Any help would be greatly appreciated as I have a phone here I cannot use :crying:
Thanks in advance!
dear same thing happened to me I post a thread on this then I get no answer , but u can use this website to unlock your phone be sure will be unlocked but try to fill information that where you already purchased your phone not where you want to use OK ?
www.unlockunit.com
wish that will help you
I just unlocked note 4 from Vodafone. I got 4 unlock codes. One is for sim and the other 3 for aomesthing more deeper in the sistem Just worked with the sim unlock code. My question for you is: if you tryed 2 different ( online and Vodafone) YOU SHOULD GOT THE SAME CODE FOR SIM UNLOCK because is strictly related to your IMEI. Is that the case?
P.S. 1.On Google play is a program Note 4 unlock. I got my unlock code in 50 minutes in the day of international launch of note 4. You should try that.
2. Write with Odin a stock firmware and try again your unlock code after that
3. To enter your unlock code you have to insert an non accepted sim in your phone, power up your phone and enter the code when you are asked. Did you do that?
Try this
Arteta said:
Hello
I purchased a brand new Samsung Galaxy Alpha Direct from Vodafone UK. My sim is under Orange/EE.
I purchased a NUC code from an unlocking vendor online. I entered the correct IMEI number as requested and received the code a few days later. I entered the code and received a message saying "Network request unlock unsuccessful."
Went through troubleshooting with the vendor and could not get it working. A refund was given.
I decided to Vodafone UK to have the phone unlocked direct through them as I thought maybe a dodgy code was given. I received my code yesterday, followed the instructions and again the same message appears.
I was growing tired with this so decided to take it to an independent experienced phone unlocker/repairer and explained the situation to him. I give him the code and he tried various different things and was baffled as this should be an easy process.
The phone is running android 4.4.4
Any help would be greatly appreciated as I have a phone here I cannot use :crying:
Thanks in advance!
Click to expand...
Click to collapse
If your phone does not ask for the unlock code:
1. Turn on the phone with original Sim card or without Sim card
2. Enter #7465625*638*NCK/Network#
The phone is now unlocked.
If your phone does not ask for the unlock code:
1. Turn on the phone with a foreign (Unaccepted) Sim card
2. Then enter the following sequence:
#0199*Unfreeze/Defreeze#
#0111*NCK/Network#
#0121*SCK/Subprovider#
#0133*SPCK/Provider#
The phone is now unlocked.
thekrisho said:
If your phone does not ask for the unlock code:
1. Turn on the phone with original Sim card or without Sim card
2. Enter #7465625*638*NCK/Network#
The phone is now unlocked.
If your phone does not ask for the unlock code:
1. Turn on the phone with a foreign (Unaccepted) Sim card
2. Then enter the following sequence:
#0199*Unfreeze/Defreeze#
#0111*NCK/Network#
#0121*SCK/Subprovider#
#0133*SPCK/Provider#
The phone is now unlocked.
Click to expand...
Click to collapse
where to type this following codes?
freedom_john said:
where to type this following codes?
Click to expand...
Click to collapse
Yes where to enter these codes and letters? I tried entering the numbers and nothing happens, if I try to press call it says Mobile network not available.