Hi guys, wonder can anyone help me. I purchased a dock for the G Tablet from a company in Chine a few months ago. I only got round to trying it out recently and the results where not good.
The dock charges the G Tablet when the PSU is connected to it, but that is all that it does. The USB port does not work, the pens light up but the G Tab does not see them.
The network port does not do any thing when a cable is plugged in.
The HDMI also does not do anything.
I have tried it with several different versions of Android including the T&T that was on the G Tab originally.
Am I missing something ? Do I need to install certain software of certain Abroid version ?.
It wouldn't usually bother me but the dock cost me over £35 and I do not want to purchase another until I am sure this one does not work. Any help would be greatly appreciated.
PS Keep up the great work, I love this site and have tried almost every new OS that has been put on it
No specific software should have to be installed. It's supposed to just work, so I'm thinking that it's bad hardware.
fergalmacdermott said:
Hi guys, wonder can anyone help me. I purchased a dock for the G Tablet from a company in Chine a few months ago. I only got round to trying it out recently and the results where not good.
The dock charges the G Tablet when the PSU is connected to it, but that is all that it does. The USB port does not work, the pens light up but the G Tab does not see them.
The network port does not do any thing when a cable is plugged in.
The HDMI also does not do anything.
I have tried it with several different versions of Android including the T&T that was on the G Tab originally.
Am I missing something ? Do I need to install certain software of certain Abroid version ?.
It wouldn't usually bother me but the dock cost me over £35 and I do not want to purchase another until I am sure this one does not work. Any help would be greatly appreciated.
PS Keep up the great work, I love this site and have tried almost every new OS that has been put on it
Click to expand...
Click to collapse
it2Steve did a very detailed review of this dock. The thread has been around for almost a year and has a lot of information if you take some time to read up on it.
Dock review
Hi, I have the Galaxy Note i717 and had to replace my charging port as it had stopped charging reliably. I bought one of the many on ebay for around 8 bucks. I proceeded to put it in when I received it but to my dismay I no longer could get service at all, just wifi. So just to verify it was nothing I broke I put the old pcb back in and service returned. At that time I believed it was just a defective unit, so second try at it same thing no service old one works fine. Is this a problem anyone has ran into before? Any help I would appreciate.
jpeeler said:
Hi, I have the Galaxy Note i717 and had to replace my charging port as it had stopped charging reliably. I bought one of the many on ebay for around 8 bucks. I proceeded to put it in when I received it but to my dismay I no longer could get service at all, just wifi. So just to verify it was nothing I broke I put the old pcb back in and service returned. At that time I believed it was just a defective unit, so second try at it same thing no service old one works fine. Is this a problem anyone has ran into before? Any help I would appreciate.
Click to expand...
Click to collapse
It is quite possible that either your new port is the wrong part, or is damaged.
The port wiring is different between models ...I.E. SGH-I717, N7000, and other note models.
Even the charge cables are different part numbers between models, but visually look identical.
It just sounds like the port wiring is different to me ..
I suggest getting the port directly from samsung...even though it will cost a bit more.
At least then you have a fall back if the port won't function.
Or perhaps have the port repaired by Samsung directly ....
I'm sorry I can't offer more help .g
gregsarg said:
It is quite possible that either your new port is the wrong part, or is damaged.
The port wiring is different between models ...I.E. SGH-I717, N7000, and other note models.
Even the charge cables are different part numbers between models, but visually look identical.
It just sounds like the port wiring is different to me ..
I suggest getting the port directly from samsung...even though it will cost a bit more.
At least then you have a fall back if the port won't function.
Or perhaps have the port repaired by Samsung directly ....
I'm sorry I can't offer more help .g
Click to expand...
Click to collapse
Well both pcb boards that they sent me have the same markings as the one I removed. They also say on them SGH_I717_SUB_REV1.0_1107
So I do believe it to be the correct part. Just to clarify the new boards do charge the phone just cellular service stops. Maybe by some crazy luck I got two faulty boards. I wasn't sure they were going to send me a replacement so I ordered from another company as well so I guess I will have to see if that one works,
Interesting ....
The part seems okay ...
And the odds of two bad ports in a row is remote at best ....
Some time ago I saw a thread about an extra wire that traveled down from the antenna to the charging port....
And users were reporting that this very small wire was being damaged or missed when the port was serviced.
I've never seen this wire or connection ......but I figured I'd bring it up ..
Try a general search on the topic ...and see if it yields a result.....
I just remember it being a big deal ....g
Just wanted to update the post in case this happens to anyone else. After getting the free replacement for the first part I believed to be defective I also ordered from another company as it took more than a month for my replacement, so I believed them to had stood me up. Well the one from the other company arrived today, and worked. Maybe the others were for different networks or something. I don't know if that is possible Rogers vs ATT frequencies and what not but it worked and all is well.
jpeeler said:
Just wanted to update the post in case this happens to anyone else. After getting the free replacement for the first part I believed to be defective I also ordered from another company as it took more than a month for my replacement, so I believed them to had stood me up. Well the one from the other company arrived today, and worked. Maybe the others were for different networks or something. I don't know if that is possible Rogers vs ATT frequencies and what not but it worked and all is well.
Click to expand...
Click to collapse
I am having issues as well...
My phone has a Rev1.0_1107 part, and I cannot charge unless I play with the cable, so i decided to replace this port.
1st was from China (ebay) and received no signal, only wifi. Rev1.0_1107
2nd was a replacement from the same company, same issue. Rev1.0_1107
3rd was from a place in CA (ebay) and is Rev2.0_1206 and same issues.
I can put my original part in there, and I get signal just fine... anybody have any ideas on this matter? It's frustrating to have to keep battery swapping and would like to get this fixed.
MisterLas said:
I am having issues as well...
My phone has a Rev1.0_1107 part, and I cannot charge unless I play with the cable, so i decided to replace this port.
1st was from China (ebay) and received no signal, only wifi. Rev1.0_1107
2nd was a replacement from the same company, same issue. Rev1.0_1107
3rd was from a place in CA (ebay) and is Rev2.0_1206 and same issues.
I can put my original part in there, and I get signal just fine... anybody have any ideas on this matter? It's frustrating to have to keep battery swapping and would like to get this fixed.
Click to expand...
Click to collapse
The one that finally worked for me was from ebay company (no.1-tech) also china but has been operating flawlessly for sometime now.
jpeeler said:
The one that finally worked for me was from ebay company (no.1-tech) also china but has been operating flawlessly for sometime now.
Click to expand...
Click to collapse
Noted... thanks. I have searched them out and they only appear to have the cable for the N7000. Can anyone else recommend a place to buy these from?
Just noticed that when it's near my window, I get 1 bar of service... So it's like my signal strength is uber weak. I have a microcell in my home, and it is functioning properly (other ATT phones are connecting just fine) and works again as soon I put the original cable back.
Hi,I have a samsung Note N7000.
I'm have a similar issue,start with high power charging issue every 5seconds.I bought a replacement from ebay company in New Jerse it fixed that problem.but it created a problem when I make a call the other end can not hear me.I email the company and they sent #2 replacement.after
the charging port board was installed now I dont have any signal for service.the pcb# N7000/i9220_sub_Rev1.0.
I'm going try different company.what should I be looking for?I'm wasting too much time on this.
johnson1828 said:
Hi,I have a samsung Note N7000.
I'm have a similar issue,start with high power charging issue every 5seconds.I bought a replacement from ebay company in New Jerse it fixed that problem.but it created a problem when I make a call the other end can not hear me.I email the company and they sent #2 replacement.after
the charging port board was installed now I dont have any signal for service.the pcb# N7000/i9220_sub_Rev1.0.
I'm going try different company.what should I be looking for?I'm wasting too much time on this.
Click to expand...
Click to collapse
Having exact the same problem.. just a moment ago I tried the third board and still hacing exact same problem, no signal or one bar only when I have one bar I can make a call but the other end can not hear me
gregsarg said:
Interesting ....
The part seems okay ...
And the odds of two bad ports in a row is remote at best ....
Some time ago I saw a thread about an extra wire that traveled down from the antenna to the charging port....
And users were reporting that this very small wire was being damaged or missed when the port was serviced.
I've never seen this wire or connection ......but I figured I'd bring it up ..
Try a general search on the topic ...and see if it yields a result.....
I just remember it being a big deal ....g
Click to expand...
Click to collapse
Sorry to bring up an old thread but I wanted to bring this to others attention. What Gregsarg said about a white wire running down from the antenna is correct, or at least it is on an i717. It runs down from the right hand side of the board, behind where the flex board connects and onto the little round connector on the flex board, it's probably that that's been missed off of some phones as would be noticed by only getting 1 bar of signal! I've also noticed that the UK version of the note only has 4 brass connectors on the flex board 2 for the antenna and 2 for the speaker whereas the i717 has 5, 3 for the antenna and 2 for the speaker. I'm not sure what the difference is between a white or black i717 to be honest, i'd have thought it would only be the outer casing that had changed, I can't see them changing parts too, that just sounds stupid!
Anyway, the reason I'm posting is not just because of the above, it's because i'm in the middle of fixing an i717 for someone and was searching to see if a N7000 part would fit and although it looks as though it would I'm not willing to test that theory! I will say though that the missing brass connector is also connected to brass connector 2 on the Ariel/speaker module but on the flex board that connector also has a resistor above it which would likely cause an issue!
The part that i'm ordering is from a company in the UK but is a Rev 2.0 board and not the rev 1.0 that is in it already so i'm hoping that's not an issue else i'm gonna have to buy from China which is cheaper but will likely take an age to get here and the customer wants it done ASAP so what they want they get! I will update this thread once i've fitted the part and got it running along with a link to where I got it from.
h4x0rm1k3 said:
Sorry to bring up an old thread but I wanted to bring this to others attention. What Gregsarg said about a white wire running down from the antenna is correct, or at least it is on an i717. It runs down from the right hand side of the board, behind where the flex board connects and onto the little round connector on the flex board, it's probably that that's been missed off of some phones as would be noticed by only getting 1 bar of signal! I've also noticed that the UK version of the note only has 4 brass connectors on the flex board 2 for the antenna and 2 for the speaker whereas the i717 has 5, 3 for the antenna and 2 for the speaker. I'm not sure what the difference is between a white or black i717 to be honest, i'd have thought it would only be the outer casing that had changed, I can't see them changing parts too, that just sounds stupid!
Anyway, the reason I'm posting is not just because of the above, it's because i'm in the middle of fixing an i717 for someone and was searching to see if a N7000 part would fit and although it looks as though it would I'm not willing to test that theory! I will say though that the missing brass connector is also connected to brass connector 2 on the Ariel/speaker module but on the flex board that connector also has a resistor above it which would likely cause an issue!
The part that i'm ordering is from a company in the UK but is a Rev 2.0 board and not the rev 1.0 that is in it already so i'm hoping that's not an issue else i'm gonna have to buy from China which is cheaper but will likely take an age to get here and the customer wants it done ASAP so what they want they get! I will update this thread once i've fitted the part and got it running along with a link to where I got it from.
Click to expand...
Click to collapse
When getting the part, Revision usually does matter. Also the serial number under the revision number (Usually starting with DRC or DRG) can also matter. Getting the identical one is usually the best bet (albeit not the easiest considering people on ebay use stock images and don't show you the ACTUAL part you're getting.)
KaboodleMoon said:
When getting the part, Revision usually does matter. Also the serial number under the revision number (Usually starting with DRC or DRG) can also matter. Getting the identical one is usually the best bet (albeit not the easiest considering people on ebay use stock images and don't show you the ACTUAL part you're getting.)
Click to expand...
Click to collapse
I got the new part this morning, it was a REV 2.0 board and after putting it all back together including the white/grey ariel wire I can report that it's working perfectly, as good a signal as it had before and is now charging properly. The link to the UK based seller is here for anyone interested that needs a replacement in the UK - http://www.ebay.co.uk/itm/300819833823?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 The part is £19.99 with no P&P and arrived in 1 day. Just in case the link doesn't work then the name of the supplier is gravedigga1.
EDIT:- I heard back from my customer today who has reported having problems with wifi, signal and loudspeaker! Therefore the Rev 2.0 part won't act as a decent replacement for the Rev 1.0 unfortunately. I wasn't able to fully test as the customer didn't leave his sim card in and he uses 1 of those weird networks which I don't have a sim for. I have managed to source another UK supplier on ebay for an even cheaper price of £12 and they verified that it is a Rev 1.0 board they have in stock and have put 1 aside for me. Once I know that one works for definite i'll report back again just to update the thread but this time the customer is bringing the phone when the new part is here so it can be tested fully before it goes back to him!
I just find it strange that even though the Rev 2.0 is exactly the same in every way as the Rev 1.0 board that it has these issues although i've not heard of the loudspeaker problem before so I think there's a fault with it anyway.
Yeah these notes are getting really dodgy in their old age. We've decided to basically not fix abutting except the screens anymore because getting the right parts is a nightmare.
Sent from my DROID BIONIC using xda app-developers app
This may be a little off key here and if I'm in the wrong thread I apologize but...
I have the i717, bought the charging port off of eBay and replaced it. After plugging in the phone the touch keys at the bottom lit up like I was in business. After allowing the phone to "charge" for about 2 hours, the touch keys were the only thing to work and light up on the phone. I could press the lock key on the side and the touch keys would come off and on like it was on the lock screen but the screen was black. Has anyone encountered this before? If so, please help!
Thank you
Btw, it seemed like the phone was charged/charging bc those touch keys were on...
samsung sgh-i717 usb port
Well I have tried three different suppliers and I have not found a board that works correctly . Some boards that network strength is weak , some boards the microphone doesn't work , some boards that speaker won't play . I have reinstalled my original board back in my phone and every time it returns back to working properly. I just need the USB /charge port to work . Please if you have any ideas let me know ib6469 @ yahoo . com . Thank you very much for or help
Pease Help..i717..charge port
Hello ,
My name is Russ and I have a Samsung Galaxy Note SGH-i717 ( AT&T ) which I love . About two months ago the charge port quit working , so I ordered one from Ebay ( Flex cable , Mic/USB board ) , installed it and my signal was weak after installing it so I reinstalled the original board and it went back to full power . I thought it was a bad board , so they sent me another , I installed board #2 and the speaker on the back had no sound , put my board back in and the speaker went back working . So I had the supplier send me another board #3 . I got it installed , and the Mic wouldn't pick up , I put my board back in everything goes back to normal . So I thought it might be the supplier , so I tried a different supplier , same thing . In total I have tried three different suppliers and I lost count on how many boards I have installed .. Every time I can reinstall the original board and it will stop whatever it's doing wrong . My board Number is SGH_I717_SUB_REV1.0_1107 , DRBL12IN BF , 69 . I am at a lost , I don't know if there's something I'm doing wrong . Thank You for your time ib6469 ( Russ )
same issu
Please let me know if anyone has had any luck finding a board that works... i am in the exact same boat... email me at bnanda0827 at yahoo.com
ib6469 said:
Well I have tried three different suppliers and I have not found a board that works correctly . Some boards that network strength is weak , some boards the microphone doesn't work , some boards that speaker won't play . I have reinstalled my original board back in my phone and every time it returns back to working properly. I just need the USB /charge port to work . Please if you have any ideas let me know ib6469 @ yahoo . com . Thank you very much for or help
Click to expand...
Click to collapse
note charching port
hi
i purchase this part from 6 different company but same problem no signal charging port works ok.
any boby have solution please let me know.its very annoing.
joe
zia_uddin said:
hi
i purchase this part from 6 different company but same problem no signal charging port works ok.
any boby have solution please let me know.its very annoing.
joe
Click to expand...
Click to collapse
So it looks like basically fixing the charge port on a galaxy note just isn't going to hapen if you want service. Nobody has found a solution?
Hi ,
My galaxy S2 is have a problem .... whenever i connect it to a power out / computer the power supply starts fluctuating because of which i cannot use my usb port on my phone to charge so i take out the batter and charge it with an external charger.
Is there any way i can root my phone without connecting it to my computer ?
And one more thing is there anyway i can get my USB port to work ?
I bought this phone when i was in USA but after i shifted back to India this problem started occurring.
The service center people cannot repair or replace it as its the USA version and not the International version.Some parts of International version are not compatible with this US version according to the service center guys.They also said that its IC is short circuited but i think when IC is short circuited the phone does not give display but its working all fine.
Please help me with these 2 things -
1.Rooting my phone without connecting to PC
2.Getting my phones USB port back to work
I'm guessing your USB port has a problem check out this thread
in my case the phones not charging.....
The phone reboots when the charger is connected
The answer to your question is no. Unless I've completely overlooked something.
You will need a good usb port to be able to root the phone. There have been a couple of people who have reported that they successfully replaced their own usb port, and say it is relatively simple to do. It may take a while to get a replacement port, but since the part is small, shipping to India should not be prohibitive. Replacing your own usb port seems to be the only practical fix for your problem.
creepyncrawly said:
You will need a good usb port to be able to root the phone. There have been a couple of people who have reported that they successfully replaced their own usb port, and say it is relatively simple to do. It may take a while to get a replacement port, but since the part is small, shipping to India should not be prohibitive. Replacing your own usb port seems to be the only practical fix for your problem.
Click to expand...
Click to collapse
where can i find a working USB port ?
Google it. Not being rude but damn...
If you have a question about when the next CD by your favorite artist comes out, you google it right? When you need to know where to find which site has the best price on that CD you google it, right?
Use that same logic here. You need a part, google it.
Also, eBay has been known to have items people want to sell that anyone can bid on. Knowing you need it shipped overseas, it would be good to make sure the seller will ship it to your location before buying it.
(Searching these forums will present you with the answer as to which part you need to look for)
Clay
Team Pirate
Sent from my PINK GSwagger2
Hi all.
I'll make it as short as possible:
My USB port is misbehaving.
Only charging is working at the moment, any connection to PC doen't work (with latest drivers).
ADB doesn't recognize the phone too, neither when on or in recovery.
Tried stock FW, latest stable CM and latest nigthly CM but same result.
I think this happened after going with the phone out to the snow and probably some water entered the usb port.
I really think it's a bad USBport and/or flex cable.
I have few questions:
1. I saw I can buy the connector only or the flex cable + connector. How can I know whether replacing only the connector will solve the problem?
How can I determine whether the problem is only in the connector or in the flex cable also or maybe even worse (motherboard or something)?
2. Does it matter where to buy the parts from? I don't live in the USA so i'll be ordering from ebay/dx probably.
3. Do you have any other tips/suggestions? Am I in the right direction at least?
Thanks a lot!
Hoping for your kind help :fingers-crossed:
Just buy the whole bit from a trusted seller.And first read the threads by duguet and keithharross about usb ports.
Then youll know whats what.
S4 victim
Didn't find a user with a name of keithharross.
Could you help? (I did find the other one)
KeithRoss39; has a guide in General section (do an advanced search of his username is easiest way to find it), has all the info you need.
ronlut said:
Didn't find a user with a name of keithharross.
Could you help? (I did find the other one)
Click to expand...
Click to collapse
The other one has more info anyhow, like cutting boards and user victories etc.
S4 victim
ronlut said:
Didn't find a user with a name of keithharross.
Could you help? (I did find the other one)
Click to expand...
Click to collapse
The thread is this one. I have a port problem myself, and it sounds like this is so common they should probably sticky it. I'm actually thinking of trying to send a bunch of "my usb/flex broke" links to the repair center to show them how often the issue comes up (but then again, they probably already know that :-/)
Hey everyone, I have a Vs985 running CM 12.1 Nightlies. I love this phone so much, but I hate that Verizon pulled a Verizon and blocked the FM Radio on this thing. Does anyone know of a device that can plug into the headset or something and use that as an external receiver? I know it's a longshot, but someone should develop it!
swimmerhair said:
Hey everyone, I have a Vs985 running CM 12.1 Nightlies. I love this phone so much, but I hate that Verizon pulled a Verizon and blocked the FM Radio on this thing. Does anyone know of a device that can plug into the headset or something and use that as an external receiver? I know it's a longshot, but someone should develop it!
Click to expand...
Click to collapse
Unfortunately, I believe they grounded the antenna path at the qualcomm IC & if they did then an external receiver will never work. I've opened my phone a few times(posted pics in the verizon general "FM radio" thread @6 months ago), compared the main and antenna boards with g3 versions(d855, ls 990) that do have radio and they look identical, so it looks like the FM disabling was done at the IC level; nothing to swap out inside to easily make it work. Also, the excellent dev Holyangel tried to get it working via software as well and no luck there. So I think its time to give up my vs985 FM radio dream.
Good ole verizon removing free features...anything to get you to use your data up
If anything changes and it is possible to make it work in the future I'm sure you'll hear about it
I was afraid of that! I had done a lot of research and was hoping beyond hope that Verizon weren't assholes. Alas, I was proven wrong yet again. Thanks for the reply!
swimmerhair said:
I was afraid of that! I had done a lot of research and was hoping beyond hope that Verizon weren't assholes. Alas, I was proven wrong yet again. Thanks for the reply!
Click to expand...
Click to collapse
I was so hoping there was a way too, but Verizon are just a bunch of d**ks about this feature The qualcomm IC in our phone is capable. There is no good reason to disable it - other than they want people to pay for data. They have great service, but man...this move is really lame. Big red is a big letdown sometimes. Oh well...it is what it is.
Take care