Hello
Where I can buy LCD display for Acer Liquid s100?
Thanks.
You can get one on ebay. Although i don't know how to get the damn thing open. Have you been able to remove your LCD ? so that you can replace it ? could you tell me how if you did. thanks.
Hi there,
Even I got my Liquid lcd broken,too.Anyone can help changing it with tutorial.Thanks in advance.
Try keepintouch web site. Just do a search for item# 771 It should bring "LCD Screen Display Ecran Panel For Acer Liquid A1 S100 Original New TFT"
As for disassembling your Acer Liquid E it is much harder than some other cell phones. Here is a guide attached that might somewhat help you with your task. I found it on Android Forums web site.
Acer A1 S100 Service Manual - Disassemble Procedure
Acer A1 S100 Service Manual [PDF] - Disassemble Procedure
I searched the web for days looking for a tut or a service manual and finally found the full service manual with the complete disassemble procedure - including pics.
www[dot]box[dot]net/shared/rylqej72jp
or
www[dot]box[dot]net/shared/r33btt9iju
or
h**p://rapidshare.com/files/445403533/ACER_A1_S100_User___Service_Guide.rar
or
h**p://hotfile.com/dl/100749010/c85027a/ACER.A1.S100.User.Plus.Service.Guide.rar.html
I tore mine down without this manual, wasn't too difficult but proceed very slowly because the double sided adhesives they use stick quite well and it's easy to damage the FPC flex cables if you're not careful, especially at the bottom of the phone below PCB. Make sure you have the correct tools for prying (plastic or Mylar).
Hope this helps...
You can find new lcd screens for liquid from Ebay.
Related
Hello,
yesterday I installed some new games on my p4350 and let a friend play with it,
unfortunally he pushed to hard with the stylus and the screen got damaged . the screen is still working but it got a dent.
now I wanna replace the screen myself, anybody can give me instructions how to do this?
Also i wanna know if the soft layer on the top(not the screen protector) and the lcd, is one thing.
http://mikechannon.net/PDF Manuals/HTC Herald Sevice Manual.pdf
download and read that ,it will show you how to disassemble the herald and take the screen out
Replacing digitiser on Herald as opposed to Hermes
Scuse me for butting in but I have both just bought a Herald with a broken screen AND have done a few screen replacements on Wizards, Blue Angels and Hermeses.
On this Herald I had just assumed that you could basically follow the video on YouTube which shows how to replace a screen on a Hermes? I see that the PDF file is quite complicated and is designed to show you how to take off every tiny part if it has failed. The screen replacement is far easier that this, right?
Secondly, I see that you can buy the screen separately from the 'protector' which is I assume the bit with the hole in on your unit? I have to say, I had never seen these replaced separately before: Is this something special to the Herald or can you replace this digitizer separately from the screen on other units as well? If so, how on earth do you get it off the screen please? And is there a reliable way of getting one back on? (There is no reference to this in the pdf manual but the digitizers are suddenly being sold on ebay for about five bucks)
So the question is whether this is still as difficult on the Herald as threads on the Hermes suggest?
I've opened my Herald, and to reach the screen you have to disassemble the whole thing.
It's not that difficult (albeit while following the service manual, since there are a lot of tricky areas like removing the Keyboard), you just need to have patience and not rush it.
Any way to set up device after flash with no touch screen.
The digitizer or screen is not functioning, before i take it all apart as shown anybody no of a way to bypass the touchscreen setup.
before trying to change the digitizer...
(and i know this is crazy but worked for me after replacing the cable going from the screen to the board)
install a screen protector and try again!
I had the same problem after opening my Herald, and right now the screen only works if i have a screen protector on. If not then nothing happens
digitizer replacement is actually very easy.
Jeffreyr1 said:
Hello,
yesterday I installed some new games on my p4350 and let a friend play with it,
unfortunally he pushed to hard with the stylus and the screen got damaged . the screen is still working but it got a dent.
now I wanna replace the screen myself, anybody can give me instructions how to do this?
Also i wanna know if the soft layer on the top(not the screen protector) and the lcd, is one thing.
Click to expand...
Click to collapse
As I have now posted on a different thread, the digitizer replacement is actually very easy. You just slip a razor blade under the tabs and lever it off after removing that yellow tape on the back.
moullas said:
I've opened my Herald, and to reach the screen you have to disassemble the whole thing.
It's not that difficult (albeit while following the service manual, since there are a lot of tricky areas like removing the Keyboard), you just need to have patience and not rush it.
Click to expand...
Click to collapse
I agree. It was not difficult at all. I took apart and put together the phone a few times after just to develop a feel for it.
We have a tendency to get nervous about it but if you relax it becomes easier.
I have a a extra digitizer that I never used. If anyone wants it, pm me.
hi,
so i have 2 galaxy s3 i9300 both network unlocked one in red and one in white
the wife has dropped both, the red is put away for now, i managed to remove the lens from the white one, but wer the bang happend the volume up doesnt work and neither does the camera, i get sum exetion error, the chrome is rather tatty too, i puit a temp lens on for time being, and yep she dropped and broke that too,
I have a new lens here with the adhesive , the top and bottom kind, touch works fine
im trying to find a guide on how to swap the complete innards from the white housing to a new midframe if i buy one, but cant seem to find the actul working lcd removal, only the logic board and cameras
and the new lcd and screen complete are rather expensive at the moment my plan is this.
and i guess il need to order new camera.
buy new housing something like this
http://www.ebay.co.uk/itm/FRONT-REP...e_Replacement_Parts_Tools&hash=item2577355c8d
ande then remove the lcd and logic board form the white one i have now and put it in this and attach the new lens,,
is this atricky job, i was told removing the lens was, took me a hr but i did it with no damage,
help would be great! just sum advice or point me in right direction for a actual lcd removal and refitting giude, but not the complete unit as i have a lens already ,
thanx
Love my phone but had large phone in small pockets and upshot is it fell out and I accidentally drop kicked it across the room.
The plastic piece under the power and volume buttons broke and created a disconnect with the power (constant restarts and even booted into safe mode) so I had to remove it to stop the plastic from continuing to jam the power button.
I have ordered a replacement front/sides for the phone but searched high and low for a fix-it or tear down video.
Anyone know how I can get the old one off and the new one on?
Any Videos around?
The phone is usable but I would prefer it whole. Can anyone help?
Cheers.
the repair manuals are online somewhere...
re uploaded them to mega https://mega.co.nz/#!pxljAbQL!FU8EMRrrGvLPOHc0BlK5ubp1L0e6voYt5tH1Y1ZQu5A
and I have seen a teardown video on youtube somewhere...
teardown of a Z http://www.youtube.com/watch?v=q4jQzuSOXM8
Thanks Both
Thanks Both, will have a look and see what I can do when the replacement parts wing their way to me.
rob.sparrow said:
Thanks Both, will have a look and see what I can do when the replacement parts wing their way to me.
Click to expand...
Click to collapse
Document it with photos/video
and good luck
Thank you very much for this manual which assisted me in the teardown of my Z Ultra.
I broke the screen in my pocket, glass and digitizer were broke making the phone useless.
The only thing missing was taking the coverglass/lcd off the frame, seems Sony replaces screen and frame as one unit.
I used one of the various guides for Xperia Z, heat and prying tool, and im now ready to put a new screen in, trying to find the best deal now.
blueether said:
the repair manuals are online somewhere...
re uploaded them to mega https://mega.co.nz/#!pxljAbQL!FU8EMRrrGvLPOHc0BlK5ubp1L0e6voYt5tH1Y1ZQu5A
and I have seen a teardown video on youtube somewhere...
Click to expand...
Click to collapse
Two days ago i dropped my phone
The lcd gone weird then its all black after a while so i went for lcd replacement
The telephone is working but no touch or lcd
What i actually found that due to compact i lost all resistors above the lcd flat cable " above the connectors" about 5 of them
So if can anyone give me either schematic map for the motherboard or a clear photo of this part so i can replace them
And yes i have lots of motherboards that i can find these tiny components all i want to find the numbers or the color of it
Thanks in advance
Find Xperia M4 Aqua screen replacament and watch carefully
Hello, there.
Unfortunately, I've dropped my mi mix 3 and I was looking to a new screen.
Looking around I've found many offers with a wide range of prices.
The question is that the Mi Mix 3 feature a Samsung Amoled 6.39 inch but it is impossible to find, everywhere I'm finding an LCD replacement. Can someone help me out?
Plus, I was a bit worried about the screen replacement procedure but then I saw this video which takes a totally different approach and made the whole thing much easier...
https://www.youtube.com/watch?v=wl2aK5wCBAI
Still, I can't find the Amoled version anywhere but only the LCD version...
Cheers
Specialosio said:
Hello, there.
Unfortunately, I've dropped my mi mix 3 and I was looking to a new screen.
Cheers
Click to expand...
Click to collapse
Goodluck https://www.witrigs.com/oem-screen-replacement-with-frame-for-xiaomi-mi-mix-3-black
Hi, i searched on aliexpress, there are lots of options but it is $100+, so in my case I ordered 6.39 lcd display, and it looks better than other analogs, costs 45 usd but it has a special plastic spacer under the display, so it sticks up a bit more, looks fine... On aliexpressI think itis 3 options lcd, led and amoled... No clue what is the one in middle. I bought mine from chila lcd seller
Upd: I think 100+ is for original there, not 'oem', but not sure
I try to order one (100+$) but the quality was awefull. some part of the screen was unreponsive.
I bought one from second hand market. Under warranty and never opened for -300$
I had the same problem, dropped my phone and screen replaced with original. Contact with this adress maybe you can order original one. Genpa is authorized service in Türkiye for Xiaomi.
https://www.genpa.com.tr/hakkimizda/eng
https://www.genpa.com.tr/iletisim-formu
I bought the witrigs one. It certainly seems genuine to me. I'm happy.
I had a honor 8 before, I'd say I bought 6-8 screens for it and never found a good one
Specialosio said:
Hello, there.
Unfortunately, I've dropped my mi mix 3 and I was looking to a new screen.
Looking around I've found many offers with a wide range of prices.
The question is that the Mi Mix 3 feature a Samsung Amoled 6.39 inch but it is impossible to find, everywhere I'm finding an LCD replacement. Can someone help me out?
Plus, I was a bit worried about the screen replacement procedure but then I saw this video which takes a totally different approach and made the whole thing much easier...
Still, I can't find the Amoled version anywhere but only the LCD version...
Cheers
Click to expand...
Click to collapse
Where do you find LCD? I can't even Find it. (I hate amoled with their burn in issues. I love lcd)
Any existing Mix 3 users that had to replace the screen in the past?
Which one did you buy and that you are satisfied with it?
Honestly I don't know which one to look at (primarily I am looking on ebay). There are some that the title say it's amoled, but I am not sure.
Any advice?
I bought the original amoled screen in aliexpress for 80€.
Happy with it!