Love my phone but had large phone in small pockets and upshot is it fell out and I accidentally drop kicked it across the room.
The plastic piece under the power and volume buttons broke and created a disconnect with the power (constant restarts and even booted into safe mode) so I had to remove it to stop the plastic from continuing to jam the power button.
I have ordered a replacement front/sides for the phone but searched high and low for a fix-it or tear down video.
Anyone know how I can get the old one off and the new one on?
Any Videos around?
The phone is usable but I would prefer it whole. Can anyone help?
Cheers.
the repair manuals are online somewhere...
re uploaded them to mega https://mega.co.nz/#!pxljAbQL!FU8EMRrrGvLPOHc0BlK5ubp1L0e6voYt5tH1Y1ZQu5A
and I have seen a teardown video on youtube somewhere...
teardown of a Z http://www.youtube.com/watch?v=q4jQzuSOXM8
Thanks Both
Thanks Both, will have a look and see what I can do when the replacement parts wing their way to me.
rob.sparrow said:
Thanks Both, will have a look and see what I can do when the replacement parts wing their way to me.
Click to expand...
Click to collapse
Document it with photos/video
and good luck
Thank you very much for this manual which assisted me in the teardown of my Z Ultra.
I broke the screen in my pocket, glass and digitizer were broke making the phone useless.
The only thing missing was taking the coverglass/lcd off the frame, seems Sony replaces screen and frame as one unit.
I used one of the various guides for Xperia Z, heat and prying tool, and im now ready to put a new screen in, trying to find the best deal now.
blueether said:
the repair manuals are online somewhere...
re uploaded them to mega https://mega.co.nz/#!pxljAbQL!FU8EMRrrGvLPOHc0BlK5ubp1L0e6voYt5tH1Y1ZQu5A
and I have seen a teardown video on youtube somewhere...
Click to expand...
Click to collapse
Related
So, about 2 weeks ago, I got my HD2 off of Craigslist with a cracked screen. It worked perfectly fine with the exception of the hardly noticeable cracks. I knew I could get the replacement digitizer/screen for $40-80. I got my screen in the mail yesterday and, following the "YouTube" video tutorial found on this site, I......ugh.... replaced the screen....................I SCREWED UP BIG TIME!
First, I broke the ribbon cable for the Side "Volume Up/Down" buttons. Then, I broke the ribbon cable for the "soft keys." Ah, crap, but oh well. I figured I could use the touch screen for pretty much everything i needed to do. Well, while prying the cracked digitizer screen from the LCD, I went a bit too deep & peeled the tinted film off of the LCD. I thought nothing of it at the time. I'd already done enough damage. So the display would be a bit brighter than normal oh well.......WRONG! I put the phone back together and once I get it to power up, all I get is a white screen. I thought I missed something. So I disassemble & check 3 more times. Still a white screen.
Well, after all of this, the new digitizer/screen doesn't want to stay in place very well. So, being pissed off and curious, I pull it out and away and notice in the backside reflection of the digitizer that I can slightly make out the phone display. So, apparently the "Tinted Film" that I accidentally peeled off of the LCD makes images visible on the phone screen. I kind of damaged this film when peeling it off. Therefore, I am unable to put it back on. Does anyone know of a simple fix without replacing the LCD?
SORRY FOR THE "SHORT STORY LONG."
I was brainstorming and thought that maybe the film was polarized. So, I grabbed my sunglasses, which are polarized, and wearing them, I can faintly see the display. Anyone think maybe polarized window tint might fix my problem?
Hey man I have some electronic devices that need repair, can I send them to you to fix them?
SURE!
You can pay me in HD2 parts.
Sir i can only say 1 thing. search ebay and replace everything you damaged. only that way you will get your hd2 in perfect state.
keesmathot said:
Sir i can only say 1 thing. search ebay and replace everything you damaged. only that way you will get your hd2 in perfect state.
Click to expand...
Click to collapse
I'd go one step further and say bin it and get a new one!
You sound just like me. That is why I never try things like that anymore. Hope it gets sorted but might be better looking for a used one.
I've got it functioning...
I found the film that I ripped off, put it over the screen and........I CAN SEE! However, the top half has lines through it. So, I must've damaged the LCD. The good news is that my phone is useable again. I just have to do everything via the touch screen and can't let the screen hibernate unless I have my charger close by. I'm just gonna keep my eye out for a cheap busted phone and eventually have a 100% phone again...
I sympathize with you. I broke HD2 while I was trying to check for loose WiFi card cable(cuz i was getting weak WiFi signals). The cable turned out to be fine but the external speaker stopped working. I opened it up again and adjusted some parts and it just got worse. the HD2 didn't power on at all. I tried fixing it but to no avail. I ended up sending the HD2 to a repair shop and was charged $170 for the repair. the repair guy said i messed up the power IC and the connector for the external speaker and he had to replace the power IC and resolder the connector.
I think I'm gonna stop trying to open up expensive phones. i was stupid thinking that since I have successfully replaced digitizer for my previous Palm T3, E2 and T5, opening up HD2 wouldn't be a problem. Should have known HD2 components are really fragile...
mmarkk said:
Hey man I have some electronic devices that need repair, can I send them to you to fix them?
Click to expand...
Click to collapse
made me laugh.......
The best topic ever Thanks, dude!
Hey all,
I recently had an accident with my 32GB Touchpad I managed to recover from, so I thought I'd share the story for the benefit of anyone else who encounters the same issue. That said, if you do have this problem, proceed at your own risk. I am not advising you to do anything I did below, rather I am sharing my own experience.
Basically it got dropped around 6-8 feet down a carpeted stairwell. It appeared to land on the side edge with the volume button. To my surprise, the screen wasn't cracked and the buttons responded, but it wouldn't respond to touch.
First, I know this isn't covered by the warranty. [SOAPBOX] Of course, one could just lie to tech support and possibly get it covered, but that isn't how I roll. I've gotten by well in life by being straight with tech support but not taking any bs, not gonna change now.[/SOAPBOX] So, I did a live chat with tech support just to see what it would cost. Short answer, $238 for a tablet I paid $150 for. So no, I decided that if I couldn't fix it myself I'd part it out to others with broken displays etc, or give it to a dev. If I got any money for it, I'd buy an actual android pad.
Once again, PROCEED AT YOUR OWN RISK! I take no responsibility if you damage or brick your device.
Past experience told me that most likely a connector inside was the culprit. I search the forums and interwebs for dissembly instructions. I couldn't find any good ones, but managed to figure it out from the following two links;
http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/Countries/_MultiCountry/disassembly_handhe_2011617223529.pdf
http://www.techrepublic.com/photos/cracking-open-the-hp-touchpad/6253940?seq=8&tag=thumbnail-view-selector;get-photo-roto
If anyone knows a good dissasembly tutorial i missed on youtube or elsewhere, please post it. Anyway, I found the ribbon cables from the panel were indeed partially pulled from their connectors (see attached ribbon 1.jpg). Flipping up the black covers (see attached ribbon 2.jpg) I was able to reposition it and flipped the covers back down.
After a bit of trouble reassembling it (due to my being rough with the side catches around the bezel), my Touchpad is back to its former self, not counting a few scuffs in the plastic around the bezel from by hamfisted work. I'm happy, and my wife is happy I'm not eyeing the Touchpad I just gave her for her birthday . I hope someone benefits from this post, as I've benefited from others' posts here. Just trying to give back.
interesting read. Knowing what you know now, how long would think the whole process would take?
a40dayflud818 said:
interesting read. Knowing what you know now, how long would think the whole process would take?
Click to expand...
Click to collapse
No more than 15 minutes. Of course, I'd try to find a better tool like the one pictured in the linked PDF in my post above. Just gotta be sure the catches around the bezel are free so as not to pull up them up as you lift the lcd panel. They're actually separate pieces of plastic, not part of the bottom mold. One had slide out from under one of the PCBs. I had to remove a few screws to lift said PCB to reposition the catch, otherwise the panel wouldn't snap back in fully.
Nomedias said:
If anyone knows a good dissasembly tutorial i missed on youtube or elsewhere, please post it.
Click to expand...
Click to collapse
It's not a video, but the steps for various replacements are quite well explained here : http://www.ifixit.com/Device/HP_TouchPad
Sine. said:
It's not a video, but the steps for various replacements are quite well explained here : http://www.ifixit.com/Device/HP_TouchPad
Click to expand...
Click to collapse
I definitely give the thumbs up with that tutorial. Very good. A pocket knife blade was my tool of choice to take the cover off!
Thanks for the tutorial.
Sorry to revive the old thread. However, my touchpad is not responding to touch, everything else is functional (it boots perfect and able to update using JC toolbox to latest 4.4.4).
I tried to plug unplug the video connector few times (after disassembling) but still it does not respond to touch. Any suggestion will be highly appreciated.
Thanks in advance.
Mac
Do you still have WebOS or a touch enabled recovery installed? That could help determine if the problem is more likely hardware or software. If it is hardware you have already done what I could do.
Sent from my SM-T900 using XDA Premium HD app
Nomedias said:
Do you still have WebOS or a touch enabled recovery installed? That could help determine if the problem is more likely hardware or software. If it is hardware you have already done what I could do.
Sent from my SM-T900 using XDA Premium HD app
Click to expand...
Click to collapse
I have completely wiped the system and removed the WebOS by using JC toolbox. However, I do have touch recovery and while booting in recovery also have problem for touch(does not respond to touch, can select using volume up/down and home button). Does it mean touch screen is now defective? Can it be replaced and is it worth try? Appreciate your input.
Thanks
macwindows said:
I have completely wiped the system and removed the WebOS by using JC toolbox. However, I do have touch recovery and while booting in recovery also have problem for touch(does not respond to touch, can select using volume up/down and home button). Does it mean touch screen is now defective? Can it be replaced and is it worth try? Appreciate your input.
Thanks
Click to expand...
Click to collapse
I would agree it sounds like either the digitizer or control board may be bad. I don't know enough to say more though. As for if it is worth it, do a search on eBay. Used Touchpads sell for under $100. New for around twice that. Nonfunctional units sell for under $50. Maybe you get lucky and can buy one with a working digitizer. If it were me, I would buy a functioning used Touchpad and sell the bad one. Or keep it for spare parts. With current more powerful 10" tablets selling new for $300-500, I'd be careful not to put too much into it.
Good luck!
Sent from my SM-T900 using XDA Premium HD app
I couldn'd find any "more powerful" tablets with 32GB ram and wireless charging. Do you know some? I bought a used touchpad then.
ranjib said:
I couldn'd find any "more powerful" tablets with 32GB ram and wireless charging. Do you know some? I bought a used touchpad then.
Click to expand...
Click to collapse
You got me on wireless charging. ☺ Not counting that I was thinking of a Nexus 9 or 10, or a Galaxy Tab. A Galaxy Tab Pro 10.1" 16GB goes for $320. It has a microSD slot and an Exynos 5 Octa CPU.
Sent from my SM-T900 using XDA Premium HD app
Well if my son continues to beat my TP up the way he does, I will definitely look at this method for the first step to solving possible touchscreen issues haha, thanks
Nomedias said:
Hey all,
I recently had an accident with my 32GB Touchpad I managed to recover from, so I thought I'd share the story for the benefit of anyone else who encounters the same issue. That said, if you do have this problem, proceed at your own risk. I am not advising you to do anything I did below, rather I am sharing my own experience.
Basically it got dropped around 6-8 feet down a carpeted stairwell. It appeared to land on the side edge with the volume button. To my surprise, the screen wasn't cracked and the buttons responded, but it wouldn't respond to touch.
First, I know this isn't covered by the warranty. [SOAPBOX] Of course, one could just lie to tech support and possibly get it covered, but that isn't how I roll. I've gotten by well in life by being straight with tech support but not taking any bs, not gonna change now.[/SOAPBOX] So, I did a live chat with tech support just to see what it would cost. Short answer, $238 for a tablet I paid $150 for. So no, I decided that if I couldn't fix it myself I'd part it out to others with broken displays etc, or give it to a dev. If I got any money for it, I'd buy an actual android pad.
Once again, PROCEED AT YOUR OWN RISK! I take no responsibility if you damage or brick your device.
Past experience told me that most likely a connector inside was the culprit. I search the forums and interwebs for dissembly instructions. I couldn't find any good ones, but managed to figure it out from the following two links;
[Removed Links... Noobie here]
If anyone knows a good dissasembly tutorial i missed on youtube or elsewhere, please post it. Anyway, I found the ribbon cables from the panel were indeed partially pulled from their connectors (see attached ribbon 1.jpg). Flipping up the black covers (see attached ribbon 2.jpg) I was able to reposition it and flipped the covers back down.
After a bit of trouble reassembling it (due to my being rough with the side catches around the bezel), my Touchpad is back to its former self, not counting a few scuffs in the plastic around the bezel from by hamfisted work. I'm happy, and my wife is happy I'm not eyeing the Touchpad I just gave her for her birthday . I hope someone benefits from this post, as I've benefited from others' posts here. Just trying to give back.
Click to expand...
Click to collapse
I ordered a screen/digitizer assembly to replace mine because its cracked. I didn't want to disbond the digitizer so I ordered the whole assembly.
When I installed the new. assembly, the screen wont come on and the phone wont boot. Here is where thing started to get interesting:
1. Boot the phone with the old screen assembly and wait until the home screen shows then turn off screen.
2. Disconnect the old screen at this moment and connect the new one while the phone in sleep mode.
3. push power button to wake screen and its working and fully functional.(New one)
If I tried to reboot the phone the new screen wont come back on again. I also tried to reset and RUU and it still wont work.
Please let me know if you have any suggestions. I am in the process of returning the screen and getting another one, but i am still worried if I will be going through the same issue. One thing I didn't like about the phone is the cheap trashy components. So easy to brake and not made to be worked on.
I think I found the problem.
Well. Taking a closer look at the ribbon cable for the LCD and it appears to be the same color, but if you follow the lines, it does not look the same. I am currently waiting on a screen from a different seller and hoping to be the right one. I will keep you updated as I go forward.
Too many views, but no comment. I just hope this post going to help someone in the future. Keep in mind that sellers doesn't specified the kind of the LCD which is creating the troubles.
I am going to attach some photos to make it little clear. Keep in mind that I have HTC One for AT&T USA.
Did you ever replace the screen? I need to take mine apart and put a new battery and USB port in it. I'd like to know how pulling the screen went for you, if it was done.
xartic12 said:
Did you ever replace the screen? I need to take mine apart and put a new battery and USB port in it. I'd like to know how pulling the screen went for you, if it was done.
Click to expand...
Click to collapse
Not that good. I watched a YouTube video that helps a Little. You have to be really careful. Watch it and let me know if you need any additional help. Removing a broken screen not that bad since its broken. Be really careful when you order your new screen because I am having trouble to fine the right one. Mine PN: 60H00741-00P . There are many PN: 60H00742-02M that aren't working for me.
Forgot the video links
To disassemble : http://www.youtube.com/watch?v=qZFAsgjCunc
To reassemble: http://www.youtube.com/watch?v=S5KNmDeJ4Ww
medoo313 said:
Not that good. I watched a YouTube video that helps a Little. You have to be really careful. Watch it and let me know if you need any additional help. Removing a broken screen not that bad since its broken. Be really careful when you order your new screen because I am having trouble to fine the right one. Mine PN: 60H00741-00P . There are many PN: 60H00742-02M that aren't working for me.
Click to expand...
Click to collapse
The problem I have isn't the screen, but rather the battery and the USB port.. I have found both for about $20 each, but just didn't want to trash a basically brand new HTC.
Did you use a suction cup or pry it out?
xartic12 said:
The problem I have isn't the screen, but rather the battery and the USB port.. I have found both for about $20 each, but just didn't want to trash a basically brand new HTC.
Did you use a suction cup or pry it out?
Click to expand...
Click to collapse
I used a plastic sharp tool and you need to find the spots where you have to press on it to get it released. If you look at the first video, you will see where he marked it. those are the lock tabs that hold the assembly. The worst could happen is you may put a few dents in the plastic frame. You can order this part for around $20. A suction cup may works for you as well. Consider giving it little heat to lose the adhesive. Let me know if you still have any further questions.
Good luck
Where to get the right LCD in USA
I finally found a good supplier in USA for the proper kind of LCD. I spoke to him on the phone and I sent some pictures of my LCD. He has LCD part number 60H00741-00P that I been looking for. The website is https://www.gounlock.com/ If you ever call, ask for Jacky.
For all the DIY'rs and repair guys I used my G2 to make a teardown guide on iFixit its similar to the one i made for the Nitro HD (P930) its pretty simple with patience and steady hands to replace anything on it just take a look at the guide hope it helps sopmeone in the future.
http://www.ifixit.com/Teardown/LG+G2+Teardown/20485
Why did you decide to start opening the back cover from the bottom right of the phone? Looking at guides for taking off the back cover on the Verizon/International version, everyone seems to start from the SIM tray slot. Is there something about the AT&T version that prevents opening the back cover from the tray? Based on your pictures, opening from the corner caused some cosmetic damage.
kashk5 said:
Why did you decide to start opening the back cover from the bottom right of the phone? Looking at guides for taking off the back cover on the Verizon/International version, everyone seems to start from the SIM tray slot.
Click to expand...
Click to collapse
Thats where i tried to start but going in from there seemed to put stress on the plastic so trying to save its condition i poked around the seam until i found the corner was willing to come open with ease
Overall it's a great guide, but a lot of the pictures are really blurry. No offense, but in a delicate breakdown, the pictures should have been crisp and clear.
kashk5 said:
Overall it's a great guide, but a lot of the pictures are really blurry. No offense, but in a delicate breakdown, the pictures should have been crisp and clear.
Click to expand...
Click to collapse
Yea i was disappointed with the pics myself but i did it at 3am just not being able to sleep and used my sisters s3 for the pics holding tools, parts, and a phone are kinda difficult but i think it gets the point across if i was going to make a guide like the ifixit team i would have setup my nikon and removed all the emi shields and pointed out the chipsets and everything
Just a quick question. Anyone else have an issue with their screen cracking? My P9000 has developed a crack over the led. I didn't drop, knock or bump the phone. I've emailed support for advice. I'll keep this forum posted.
Update got a very prompt response. Two sentences
"Good day!
we are sorry to hear that, but screen will not crack by itself. it may have some physical damage on it."
No details of how to get a repair, that's it! Not the best customer service. I've replied enquiring about service centres, costs etc. and will update the post when I get more info. There are a few posts asking for similar details re. Screen replacement so the info will be useful for the community.
actually it's strange to think that a screen can brake by itself , can you post some pictures?
elephone customer care have already proved it's lower quality service . i don't know where you live but best solution imho is to give the phone to a local cinese phone repair shoop , here in my city there are a couple that repair - fix phones for low money and they also provide spareparts that arrive very quick and at low price thanks to it's black market channel, try to search one
I agree it's very unusual that the screen would break in this way, but I'm really very careful with all my devices and this has never happened before.
If Elephone say that this cannot happen then I'm not going to quibble, I'm more interested in repairing the phone. Sending it back to the seller for repair will be an interesting, long and probably prohibitively expensive process, but I'll make enquiries.
In other news Elephone are still working on a new ROM for the device, I took the opportunity to ask supplementary questions in my email :laugh: so the chatter on the forums about the 19/04 build being the last one can abate for a while.
The crack in question. Doesn't impair functionality and there's are no signs of impact
The only replacement display I found on the Web is this one https://m.aliexpress.com/item/32673463140.html Unfortunately I have no clue if this is an original display and if could place it on my phone by myself
Your phones has physical damage along the bottom side of the metal frame can clearly see where its been scraped. You sure it didn't drop or get dragged along something while face down? Hopefully there's an OEM replacement as its just the glass that seems to be damaged not the LCD
Thanks I wouldn't know how to even begin the repair but it's useful info.
I had a similar small crack appear on mine which had not been dropped I assumed it had been knocked whilst in my pocket, But then today i put my phone in my pocket to drive and collect the kids when i got to the school i had 3 additional cracks I assume its something to do with the size of the screen and it not flexing.
The new cracks now make it pretty tough to use the phone as they are affecting the touch functions, once i can unlock it i will take some photos to post.
Banathe said:
I had a similar small crack appear on mine which had not been dropped I assumed it had been knocked whilst in my pocket, But then today i put my phone in my pocket to drive and collect the kids when i got to the school i had 3 additional cracks I assume its something to do with the size of the screen and it not flexing.
The new cracks now make it pretty tough to use the phone as they are affecting the touch functions, once i can unlock it i will take some photos to post.
Click to expand...
Click to collapse
Thank you. I'd almost convinced myself that I must have knocked the phone.
Events have taken a new turn. The left hand side of the screen now creaks and pops when you press on it. If I press sufficiently hard enough it stops creaking and popping, almost as if it is correctly seated again only to literally and audibly pop out again 5 minutes later.
I will post a video later, and will be contacting elephone with evidence that there is a design flaw with the device. I'll keep this forum updated on my progress.
thats weird thats where my spontaneous crack started images attached, the bottom one is under the glass but i think was the cause of the left side one.
Adding images as attachments as well given the URLS don't seam to be showing correctly.
Mine also has a minor crack on the screen, it's in a case and has not been dropped. There is no damage to the frame at all, I'm guessing it's from being in my pocket. The phone obviously isn't as strong as mainstream manufacturers. My crack is very faint in the top right corner and you really have to look at it in a certain light to see it.
If it gets worse, I'll buy a new phone (One Plus 3) and not look at this device again
Sent from my P9000 using Tapatalk
Mine broke in my front pocket without impact. It was the aluminium frame that was bending and must have cracked under the stress. In hindsight I should have started putting the phone in my pocket the other way around. Ha ha!
YorkshiresSnipper said:
Mine broke in my front pocket without impact. It was the aluminium frame that was bending and must have cracked under the stress. In hindsight I should have started putting the phone in my pocket the other way around. Ha ha!
Click to expand...
Click to collapse
I note the replacement screens have come down in price I may have to have a go at a repair.
Sent from my Z2 Plus using Tapatalk