Sorry for the delay, but here we go!
Of course, to be able to flash this ROM - check out SimpleRoot for a semi-easier way on getting into ClockWork Recovery
SimpleRoot: http://forum.androidspin.com/showpost.php?p=14230&postcount=1
Also, if you are used to Eugene's method - well of course that works!
Features:
[*]T-Mobile Sense UI v2.1-update1 (Production Version)
[*]Automatic Apps2SD (just have an EXT 2/3 partition positioned anywhere on the SDCard)
Note: Do NOT use EXT 4 as it will cause BootLoop
Also, A2SD is pretty useless and not recommended as Dalvik-Cache on /cache gives an extra 30-40mb[*]Dalvik-Cache is moved to Cache Partition (saves around 30mb for more data/apps)
[*]Gallery3D, LWPs (from OpenEclair - have proper MDPI drawables), ADW Launcher
[*]WiFi Tether (App Included, USB/BT Tether - TBA)
[*]Rooted ADB (maintains production kernel), su, SuperUser app
[*]Automatic ZipAlign of all applications at bootup
[*]Includes E2FSProgs (for checking and converting EXT filesystems)
[*]Includes a massive APN list
[*]Commandline extras: powertop, htop, nano, busybox, openvpn, openobex tools
[*]Deadline FIFO=8 (better porformance on slower CPU devices than the default FIFO=16)
[*]Minor optimizations in the bootup script (init.rc)
Click to expand...
Click to collapse
Download: http://forum.androidspin.com/showpost.php?p=14236&postcount=1
Report Issues: http://code.google.com/p/wgbuild/issues/list
ChangeLog:
v1.0.2
Fixed WiFi/BT (Thanks to whoever found it first... Eugene_373 or KingofYo1)
Increased GPRS Class to 12 (Some may see small speed increase on EDGE)
Doubled Max Bitrate for video encoding
Enabled AMR-WB (Better voice quality, see http://en.wikipedia.org/wiki/Adaptive_Multi-Rate_Wideband)
Decreased WiFi Scan Interval from 15sec to 1min (hopefully increase battery life)
Added Bouncy Menus (I missed them...)
Known Issues:
Using an EXT4 partition for a2sd will cause the phone to bootloop
[*]Users coming from the ENG build will not be able to boot (note: this is also occurring elsewhere as well, so will work on it later)
Some LWPs may FC (please create an issue in Google Code)
Android IME is in /system/app but not in Keyboard settings
This isn't CM6 FroYo
wesgarner said:
Sorry for the delay, but here we go!
Of course, to be able to flash this ROM - check out SimpleRoot for a semi-easier way on getting into ClockWork Recovery
SimpleRoot: http://forum.androidspin.com/showpost.php?p=14230&postcount=1
Also, if you are used to Eugene's method - well of course that works!
Features:
Download: http://forum.androidspin.com/showpost.php?p=14236&postcount=1
Report Issues: http://code.google.com/p/wgbuild/issues/list
Known Issues:
WiFi is broken (but WiFi tether works)
Some LWPs may FC (please create an issue in Google Code)
Android IME is in /system/app but not in Keyboard settings
This isn't CM6 FroYo
Click to expand...
Click to collapse
downloading now. will check it out and report tomorrow. Thanks for your work.
Flashing now. Thanks Wes!
@wesgarner curious... how is WiFi broken and WiFi tether working???
I need wifi or I would flash this baby asap.
sk8rbebop said:
@wesgarner curious... how is WiFi broken and WiFi tether working???
I need wifi or I would flash this baby asap.
Click to expand...
Click to collapse
WiFi = connects to a router to access the internet
WiFi tether = acts as the router
Glad to see WesBlend out, will hold off flashing until WiFi is working though (syncing contacts on 2g = hell)
r0man said:
WiFi = connects to a router to access the internet
WiFi tether = acts as the router
Glad to see WesBlend out, will hold off flashing until WiFi is working though (syncing contacts on 2g = hell)
Click to expand...
Click to collapse
I know, lol. It just seems like the later would be a harder fix than the first...
it doesnt boot for me
Having the same issue. Won't Boot as it appears to get stuck on, the first mytiuch screen.. Waited ten minutes
Sent from my T-Mobile myTouch 3G Slide using XDA App
not going to #BlameWes
Looks good and is responsive enough, Good work Wes!
I had to make sure my apps2sd partition was ext3 with SlideMeRoot5r1 or it would never boot. Not sure if this is the same case here. What would happen is the screen would stay black forever on first boot after flash.
adb logcat will show you if you are stuck in a boot loop after install.
Anyone got this rom to boot yet?If so,can anyone confirm if Root Explorer and Metamorph working.
Anyone got this rom to boot yet?If so,can anyone confirm if Root Explorer and Metamorph working.
Click to expand...
Click to collapse
Root explorer isn't getting root privileges
adb has root though:
Macintosh-2:tools Fordude$ ./adb shell
#
edit: Terminal Emulator doesn't have root either, su permission denied.
Flashing this soon as it downloads on my crappy 2g connection at the office. Sounds like it's got problems, but I'm really interested in trying this one!
How is this rom compared to SlideM speedvise?
if its not CM6 Froyo...
why would we want it?
i meen even one of the most BASIC things isnt working(wifi)lol
so ill stick to slidemeroot5 til something useful and new comes out
squidbutt said:
if its not CM6 Froyo...
why would we want it?
i meen even one of the most BASIC things isnt working(wifi)lol
so ill stick to slidemeroot5 til something useful and new comes out
Click to expand...
Click to collapse
squidbutt said:
if its not CM6 Froyo...
why would we want it?
i meen even one of the most BASIC things isnt working(wifi)lol
so ill stick to slidemeroot5 til something useful and new comes out
Click to expand...
Click to collapse
Man just put out a new rom for us to try and that's the thanx he gets?
Thanx for your work,im gonna try it,i wish we would get more "bare bones" or plain android roms though, without sense.
Is there any way to move dalvik to a cache partition on the other roms?? What exactly is modded on this rom to do that?
How is this rom compared to SlideM speedvise?
Click to expand...
Click to collapse
I don't notice any difference.
Quadrant results for me:
SlideM and SlideMeroot5r1
Quadrant on Wesblend Sense 1.0.1 - 381
Quadrant on SlideM - 387
Tried it out, but liking slideM more. Good work Wes... keep it up.
Sent from my T-Mobile myTouch 3G Slide using XDA App
squidbutt said:
if its not CM6 Froyo...
why would we want it?
i meen even one of the most BASIC things isnt working(wifi)lol
so ill stick to slidemeroot5 til something useful and new comes out
Click to expand...
Click to collapse
Some people.....
Seriously, if you don't like what the Devs are putting out, then don't flash the rom, don't root your phone, and even better yet, don't post here.
I see thread after thread on here with people complaining and talking down about what some people are doing for FREE. They don't owe you anything.
Related
First off - I must acknowledge that that code this came from, is not mine. All credit goes to Geniusdog254, fat-tire, mbm (irc advice), and those who have committed to their branches; i would like to eventually make my own branch, but for now, this is a great start. Hopefully this is ok with them - if not, i will happily take it down.
UPDATE AT YOUR OWN RISK.
So, for all those lucky 2.1 users, you have have a nice overclocked kernel. Well, today lucky 2.2 users get the same enjoyment! Just as a teaser - Quadrant gives a score of 1618
0.2:
950Mhz: http://www.mediafire.com/?mbfnt3i39cz8q9o
900Mhz: http://www.mediafire.com/?opmajiyx1puf11t or http://www.megaupload.com/?d=AQKPIPHR
Changes:
***ROTATION IS FIXED***
Original Kernel base proved unstable for the Froyo build. So, went back to basics, and modified the original Nookie Froyo Kernel, as found here: https://github.com/fat-tire/nook_kernel
Future code will be branched from this for the time being.
Built two different kernel speeds, for those whose systems dont like 950.
0.1:
http://www.mediafire.com/?aoadpgt2foxhby9
Compiled from https://github.com/fat-tire/Quickie, as of 1/18/11.
Kernel defaults to 950Mhz
Kernel made compatible to 2.2 standards, with other minor fixes (as noted in Github
To Install:
[Pre Install]
Wipe Dalvik Cache
As suggested here: http://forum.xda-developers.com/showpost.php?p=10749287&postcount=12, it is best to wipe the dalvik cache (if this is not the first boot of the system,). To do so (after connecting your nook to a PC):
Code:
adb shell
cd /data/dalvik-cache
rm *
reboot
This can also be done in root explorer.
[Install]
Right now, nothing more than replacing the old uImage with the new. You will find the old uImage on the SD card under /boot. Before you do ANYTHING, make a backup of your old uImage, just in case you want to go back.
[Tested on]
I have tested this Kernel on both a fresh copy of .5.8, as well as the custom .5.9 as posted here: http://forum.xda-developers.com/showthread.php?t=922324
[Recomendations]
Get SetCPU (from this friendly forum!), and change the governor to on-demand. It is currently defaulted to conservative for battery, but OD should give better performance.
Future & Reserved:
Ideally, i would like to build on this kernel, and add features other kernels have, such as different governors, BFS, and HAVS. I don't know much I can actually do, but as time goes I am sure i will learn more. Please be patient with me, and remember this is a WIP. While i am not new to coding, I am new this kind of kernel work, so I am still picking up things here and there..
Issues -
Quadrant is stupidly picky. I am not sure what i did to get it to run when I did, but the best i can say s to keep trying. Right now, it seems to really hang at 2/4 on the I/O.
I believe the default governor is set to conservative; i recommend downloading SetCPU and setting it to ondemand.
Woot Saw the IRC work and couldnt wait.
And i was going to say the wait at 2/4 on I/O was like that before
1607 Quadrant score
Tried kernel, got one boot noticeable speed up. second boot failed, now back to standard. can't wait to this matures. great work... perhaps it may help if you clear out davlik cache via root explorer before reboot. i didn't and could not as i'm running from emmc, hence can not use clockwork recovery to clear cache.
kassemja said:
Tried kernel, got one boot noticeable speed up. second boot failed, now back to standard. can't wait to this matures. great work... perhaps it may help if you clear out davlik cache via root explorer before reboot. i didn't and could not as i'm running from emmc, hence can not use clockwork recovery to clear cache.
Click to expand...
Click to collapse
Just boot a copy of nookie froyo from a mircosd and mount the /data partition from the emmc to delete the davlik cache. That's how I was making changes to nookie froyo when I was running it off the emmc. Once hardware decoding for media is supported I will put NF back on the emmc. Can't wait till clockwork supports froyo. I will be all over this!
Nook [email protected]+Nookie=Awesome
Not working on my Froyo'ed Nook
Divine_Madcat said:
To Install:
Right now, nothing more than replacing the old uImage with the new. You will find the old uImage on the SD card under /boot. Before you do ANYTHING, make a backup of your old uImage, just in case you want to go back.
Click to expand...
Click to collapse
Hi! It sounds really promising.
I've tested but it failed I've taken the SD card off from the Nook, then mounted it my Linux box (in /media, the default for Ubuntu 10.10), made a copy of /media/boot/uImage, copied the uImage file I've downloaded into /media/boot, re-inserted the SD card in the Nook and relaunched it...
... I get the 1st "Loading..." message (the one well centered), the screen goes off then back on ant stays like that: blank dark screen with the backlight on.
When I restore my previous uImage backup, my Froyo'ed Nook comes back to live.
Any idea? TIA
xyzolog said:
Hi! It sounds really promising.
I've tested but it failed I've taken the SD card off from the Nook, then mounted it my Linux box (in /media, the default for Ubuntu 10.10), made a copy of /media/boot/uImage, copied the uImage file I've downloaded into /media/boot, re-inserted the SD card in the Nook and relaunched it...
... I get the 1st "Loading..." message (the one well centered), the screen goes off then back on ant stays like that: blank dark screen with the backlight on.
When I restore my previous uImage backup, my Froyo'ed Nook comes back to live.
Any idea? TIA
Click to expand...
Click to collapse
Same thing happening here.
Just curious, have either of you tested the 950Mhz kernel in the stock eclair build? The problem sounds suspicously like the system not handling the overclock.
However, I am working on some stuff (specifically, fixing the rotation issue), and hope to have some updates soon.
I have used the 950 kernel on 2.1 for about a week no issues. I'm happy to test again with a davlik cache wipe. On the way to work now. So hopefully you can post new build by then.
Divine_Madcat said:
Just curious, have either of you tested the 950Mhz kernel in the stock eclair build? The problem sounds suspicously like the system not handling the overclock.
However, I am working on some stuff (specifically, fixing the rotation issue), and hope to have some updates soon.
Click to expand...
Click to collapse
Sent from my Nexus S using Tapatalk
Divine_Madcat said:
Just curious, have either of you tested the 950Mhz kernel in the stock eclair build? The problem sounds suspicously like the system not handling the overclock.
However, I am working on some stuff (specifically, fixing the rotation issue), and hope to have some updates soon.
Click to expand...
Click to collapse
Yes. 950 Mhz ran fine for me. The 1Ghz though did not.
I didn't do a Dalvik cache wipe first. When i get a chance I'll try that and give it another go.
deitiphobia said:
Same thing happening here.
Click to expand...
Click to collapse
I have the same thing happening - flashing loading; then the screen going blank, but staying on ... after about 2-3 retries, I can get it to boot. As long I keep it booted, I don't have any more problems.
Been running the 950 kernel w/ 2.1 no problems ...
jasoraso said:
I have the same thing happening - flashing loading; then the screen going blank, but staying on ... after about 2-3 retries, I can get it to boot. As long I keep it booted, I don't have any more problems.
Been running the 950 kernel w/ 2.1 no problems ...
Click to expand...
Click to collapse
Same thing here as well. I got it to boot after 5 tries. It helps if you hold the power button a little past the "Loading...".
After that I wiped dalvik-cache and it reboots fine now.
Code:
adb shell
cd /data/dalvik-cache
rm *
reboot
watzone69 said:
Same thing here as well. I got it to boot after 5 tries. It helps if you hold the power button a little past the "Loading...".
After that I wiped dalvik-cache and it reboots fine now.
Code:
adb shell
cd /data/dalvik-cache
rm *
reboot
Click to expand...
Click to collapse
Gave this a shot, hopefully this helps!
EDIT: first two reboots > boots fine!
watzone69 said:
Same thing here as well. I got it to boot after 5 tries. It helps if you hold the power button a little past the "Loading...".
After that I wiped dalvik-cache and it reboots fine now.
Code:
adb shell
cd /data/dalvik-cache
rm *
reboot
Click to expand...
Click to collapse
I can get it to boot every 4th or 5th time, but only into instability. It will crash shortly thereafter for one reason or another. Currently it's bootlooping, but NOT off the SD card and Nookie Froyo, it's bootlooping off of the internal memory and 2.1.
I think I'm going to give up on this for now till a more stable solution is reached.
My 2.1 is still running fine at 950Mhz though despite not being able to get this to work for Nookie Froyo.
FOr anyone interested - There are two new Kernels posted, based off different (more stable) code, with one built at 900Mhz, and the other at 950. Please test and use, i think you will find them more stable than the previous..
Excellent, trying the 950 now. I couldn't get the 900 to download. I just keeps looping.
Homer
Homer_S_xda said:
Excellent, trying the 950 now. I couldn't get the 900 to download. I just keeps looping.
Homer
Click to expand...
Click to collapse
Download from the server? Or working on the nook?
Divine_Madcat said:
Download from the server? Or working on the nook?
Click to expand...
Click to collapse
Cannot download it from the server. The 950 was fine, but I could not get the 900 zip from the server.
My NC/NF is rocking 950! Cleared the Dalvik cache via Root Explorer, powered off via QuickBoot, swapped the uImage (after backing up the NF 0.5.9 one and verifying that my backup worked) and powered on. Booted on the first go and it already seems snappier. In the About Phone the kernel now shows as
2.6.29-omap1
[email protected] #2
UPDATE: WOW just wow! Dolphin HD is actually usable now, it was really dragging before. When this gets stable from the internal memory it will be amazing.
Excellent!
Homer
Homer - not sure why its doing that, but i put up an alternate mirror just in case.. but it sounds like you don't need it.
For everyone who is trying it - please drop some feedback. I really want to learn and support this kernel, but can only do so with feedback. Thanks!
Divine_Madcat said:
Homer - not sure why its doing that, but i put up an alternate mirror just in case.. but it sounds like you don't need it.
For everyone who is trying it - please drop some feedback. I really want to learn and support this kernel, but can only do so with feedback. Thanks!
Click to expand...
Click to collapse
The alternate server worked fine. I dl'd the 900 version just in case. Will you be trying a 1GHz version?
Also, any chance you can figure out how to implement IPtables? I'm dying to get proxy for wifi working at least near to how it works on my iPod touch. I can't get over the fact that Google really doesn't seem to want to get into businesses with Android.
Homer
I guess this is safe to post, since it's available free to all in Rom Manager now...
Thanks to JT1134, Punk.Kaos, and Adrynalyn we finally got a Froyo leak. Not like the Vibrant guys who get one every 2 weeks for the past 4 months, but I'll take what I can get.
So this ROM is based off of the EB01 leak released by Adrynalyn, it is Deodexed, and ready to go.
As with all my roms I have removed almost everything and allow you to add back only what you want.
This link is for the stand-alone version of the rom, it can be flashed without any additional files needed to have a running baseline.
Thanks to all of my seeders for the torrent, micdawg for the adbdev.com mirror, and to androiddoes for the bulk of the hosting.
www.adbdev.com/sonofskywalker3/Blackhole_Fascinate_4.21SA.zip
http://www.multiupload.com/AZ816LMT22
***ROM MANAGER VOODOO INSTRUCTIONS***
If you are using the EB01 Voodoo Kernel you will need to revert the /system partition to rfs in order to use Rom Manager to apply updates or download the Rom.
1. Reboot into Red CWM by using the recovery power menu option or the three button bootup.
2. Choose "Voodoo"
3. Choose "/system lagfix off"
4. Reboot
This allows you to have the lagfix on all the other partitions, but still works with Rom Manager. After you've got the rom setup to your liking you can follow the same steps to turn the /system lagfix back on.
4.01 Changelog:
Added custom hosts file to block ads
Added necessary DRM files to allow music player to play more than one song
Added Accurate Battery and Power/Reboot options mods
4.1 Changelog:
Added appwidgetpicker.apk to collapse widgets into categories
Removed default Boot/shutdown animation files to lower download size and prevent mismatched video/audio
Removed additional Kies and Nuance files from stock rom
Removed additional unused files
Removed default sounds, use market apps to make/download custom tones, or download Stock Audio Pack from Extras in Rom Manager
Removed spanish language from text-to-speech, can be redownloaded from the market.
4.2 Changelog:
Now EB01 based, latest froyo leak
Included 5 lockscreen mod by sbrissen, choose in settings/display between puzzle, glass, aosp, epic, or rotary
Included long press search key for google voice search mod by dhoard
Included modded camera by Gizmodroid (power key takes picture/starts recording, removed lowbattery lock, added geotagging)
**If you install a custom theme without these options built in you will lose them. look for themes updated 2/15 or later.**
4.21 Changelog:
Fixed bootloop after /data wipe issues
Kanged bits from Superclean 2.4 to improve stability (Thanks Adrynalyn)
Removed various unnecessary files
Added audio back into core rom because of some issues it was causing
**If you want a a build without the audio files let me know and I can make an optional update that will remove them**
Confirmed the phone app still FC's after a *228 programming, which also kills the buttons somehow, but it does update your roaming, just reboot and you're ready to go.
Downloding now kind sir.
Badass!!!
Sent from my SCH-I500 using XDA App
What is the deal with Wifi tethering on Froyo?
Is everything working in this ROM?
Also, I have a Fascinate on VZ. Not rooted or anything. Is there a step by step somewhere to using this ROM?
Thanks.
matthewsh said:
What is the deal with Wifi tethering on Froyo?
Is everything working in this ROM?
Also, I have a Fascinate on VZ. Not rooted or anything. Is there a step by step somewhere to using this ROM?
Thanks.
Click to expand...
Click to collapse
First you need to do some research about Roms and rooting. Pros and cons. Once you do that search how to root and installing roms
Sent from my SCH-I500 using XDA App
Taking a while to download. <= 20 kB/s
b1850975 said:
Taking a while to download. <= 20 kB/s
Click to expand...
Click to collapse
Same here. Everyone is rapeing this lmao
Sent from my SCH-I500 using XDA App
Does anyone know if USB Debugging is stable on this ROM? All the other DL30 ROMs I've tried have flaky USB mass storage/usb debugging where the usb debugging randomly switched off and the SD card mounts, which is really annoying for development.
zachsx said:
Same here. Everyone is rapeing this lmao
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Same here... Almost 1 hour and it's up to 88%, on wifi... just need this last 12% so I can leave the house. (don't want to try going wifi->3G after i've received this much).
Can't wait though... !!
EDIT: ... Just realized that was 88% of the 1st item... 18 more to go
amcq
I can only say that I have not had any issues with it. It mounted fine, and only when I told it to, debugging hasn't had any issues.
Damn rom manager isn't giving me errors. I guess its to flooded right now.
sent from my fascinating fascinate eating delicious froyo.
is this optimized over super clean?
sonofskywalker3 said:
MAKE SURE YOU DISABLE VOODOO FIRST!!! YOU WILL SOFT BRICK YOUR PHONE IF YOU DO NOT!!
Click to expand...
Click to collapse
Can it be re-enabled after install?
Delete
justin94 said:
Damn rom manager isn't giving me errors. I guess its to flooded right now.
sent from my fascinating fascinate eating delicious froyo.
Click to expand...
Click to collapse
Do you mean it IS giving you errors? Because it gave me errors [on the download]. Did not make it past 10% either time I tried.
Is there a way to have the puzzle Lock in this rom? I'm at work now and really can't download the whole rom to check it out and I am very curious haha.
Sonofskywalker3 and all other developers great work guys out is appreciated
Sent from my Super clean fasinate using XDA App
Same deal with the tethering on this as with the other dl30 variants?
Mmmmm...Froyo!
Mine's stuck at 15%
Downloaded in like 2 minutes
Sent from my SCH-I500 using XDA App
zzd4nzz said:
have you even looked at the other threads... DL30 doesn't have/support voodoo yet...
Click to expand...
Click to collapse
I'm trying, but it's very confusing for someone that doesn't come here very often.
Thank you for the information though.
Q&A: [ROM-1.2/GRJ90] CM7Tab for the GTab (based on CM7 Nightlies) [Update: 08-15-11]
MOD EDIT: THIS IS THE Q&A SECTION FOR [ROM - 1.2] CyanogenMod 7 nightlies for the GTab
ALL Q&A FOR THIS ROM HAPPENS HERE.
Thanks.
---------------------------------------------------
As suggested, I have decided to make my own thread for the Cyanogenmod nightlies and other ROMs. It will make things a lot easier in the long run.
Disclaimer: as with the other Roms, Use at your own risk! Since the CM7 nightlies are basically an ongoing beta, you run the risk to brick your Gtab if you are not careful. Use to learn NxFlash first before attempting to flash ROMS. Also, do yourself a favor and get Titanium Backup! Always backup yours apps/settings and wipe data/cache/dalvik before flashing.
These will be using the bootloader's 1.2 Pershoot's kernel (2.6.32.43 / 1.4 ghz Kernel) for GB. This ROM works with the Gtab and should work with the ZPAD altough I have no confirmation of this yet.
Thanks goes out to: Team Douche/Cyanogenmod Devs for making a great ROM, Zyhong for showing me how to update to 1.2 and a few more tricks, Maxdamage for taking the time to compile the nightlies for 1.1 users, Pershoot for making such a great kernel and Roebeet for being the one that inspired me to take my journey down the Android rom lane.
1) latest version of CM7Tab: CM7Tab build 08082011 (Nightlies changelog)
2) Test CM7Tab with 4950 drivers: Test Build 08152011
Changes in modified version
1- replaced DSPmanager.apk with a previous version that is known to work (7.0.3) (if you open it, it FCs)
2- vold.fstab is setup as sdcard for internal storage & emmc for external card
3- using pershoot's 2.6.32.43 GB kernel for 1.2 bootloader (For more info, check his blog.
4- Read_ahead_kd increased from 128 to 2048.
5- Set up overclocking by default and battery saver script + cpu governors via userinit.sh (from Zyhong's ROM, based on Caulkin's scripts).
6- Replaced Camera libs & apk to stop the 8-bit pixelling.
7- Increased dalvik.vm.heapsize to 64m (07102011)
8- Set some values to improve video playback (07272011)
9- Changed values for lowmemorykiller minfree in init.rc (08072011).
10- changed EMMC to microsd (08072011)
11- updated ROM up to 2.3.5 (08072011)
12- Camera fix (08082011)
To-do list:
1- remove some apks (such as Rom manager) & create a removed apks folder.
--------------------------------
Issues:
1) Once you set up DSPmanager, it force crashes.
1) Vanilla CM7 nightly (only vold.fstab was modified): Latest build: Build 07262011 (Changelog)
If you have suggestions/ideas, do not hesitate to share them.
thank you.
Going to give it a try, tried cm7 a while ago and was great with it but seemed a bit slow. On Iluminate now do I have to flash back to stock?
Sent from my Android Illuminate using XDA Premium App
nelomen said:
Going to give it a try, tried cm7 a while ago and was great with it but seemed a bit slow. On Iluminate now do I have to flash back to stock?
Sent from my Android Illuminate using XDA Premium App
Click to expand...
Click to collapse
How long ago did you try it? I try to play areound with CM7 with the CM7tab ROM to see if I can speed it up a little as well. You can give it a try and tell me what you think.
Icewyng said:
As suggested, I have decided to make my own thread for the Cyanogenmod nightlies and other ROMs. It will make things a lot easier in the long run.
Disclaimer: as with the other Roms, Use at your own risk! Since the CM7 nightlies are basically an ongoing beta, you run the risk to brick your Gtab if you are not careful. Use to learn NxFlash first before attempting to flash ROMS. Also, do yourself a favor and get Titanium Backup! Always backup yours apps/settings and wipe data/cache/dalvik before flashing.
These will be using the bootloader's 1.2 Pershoot's kernel (2.6.32.42 / 1.4 ghz Kernel) for GB. This ROM works with the Gtab and should work with the ZPAD altough I have no confirmation of this yet.
Thanks goes out to: Team Douche/Cyanogenmod Devs for making a great ROM, Zyhong for showing me how to update to 1.2 and a few more tricks, Maxdamage for taking the time to compile the nightlies for 1.1 users, Pershoot for making such a great kernel and Roebeet for being the one that inspired me to take my journey down the Android rom lane.
Issues:
1) Once you set up DSPmanager, it force crashes.
1) Vanilla CM7 nightly (only vold.fstab was modified):
Latest build: Nightly build 07112011 (Changelog)
2) Modified version of the ROM: CM7Tab build 07102011
Changes in modified version
1) replaced DSPmanager.apk with a previous version that is known to work (7.0.3) (if you open it, it FCs)
2) vold.fstab is setup as sdcard for internal storage & emmc for external card
3) using pershoot's 2.6.32.42 GB kernel for 1.2 bootloader (For more info, check his blog.
4) Read_ahead_kd increased from 128 to 512.
5) Set up overclocking by default and battery saver script + cpu governors via userinit.sh (from Zyhong's ROM, based on Caulkin's scripts).
6) Replaced Camera libs & apk to stop the 8-bit pixelling.
7) Changed values for lowmemorykiller (07102011).
8- Increased dalvik.vm.heapsize to 64m (07102011)
RC1 version of the rom with changes: 7.1.0 RC1 with Pershoot 42 kernel
(Sorry if this is short but I will improve the thread as it goes)
To-do list:
1) remove some apks (such as Rom manager) & create a removed apks folder.
2) change the EMMC to Sdcard2
If you have suggestions/ideas, do not hesitate to share them.
Click to expand...
Click to collapse
personally I have been using your build for a while and quite happy with it except the market which sometime shows my apps and other time it doesn't. I have not tried any market fixes yet, so it is partiality my fault as well.
Icewyng said:
How long ago did you try it? I try to play areound with CM7 with the CM7tab ROM to see if I can speed it up a little as well. You can give it a try and tell me what you think.
Click to expand...
Click to collapse
I tried it today but was getting a lot of fc's, it did seem a little faster then I remember except the boot up was really slow as I remember. I did not give it a full try because I failed to wipe everything because I was at work and wasn't really supposed to be on it. I will do it again tonight with full wipe and see if it gives better results and let you know.
I just realized you have a tab build so I will try that one. The one thing I noticed right away with cm7 is that my tablet looked like a phone and I have been jumping around from HC roms and got used to a more tablet specific rom. I will give you update in a few hours I think.
Edit: have been trying for a couple of hours now but sent me in to boot loop had nvflash back to stock, will give it another shot once this silly Tap n Tap is finished loading.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
rob_z11 said:
personally I have been using your build for a while and quite happy with it except the market which sometime shows my apps and other time it doesn't. I have not tried any market fixes yet, so it is partiality my fault as well.
Click to expand...
Click to collapse
Dalingrin was kind enough to provide a fix that seems to resolve most of the problems with market (including buying apps). It was merged in build 07092011+ so give it a try and tell me how it goes.
nelomen said:
I tried it today but was getting a lot of fc's, it did seem a little faster then I remember except the boot up was really slow as I remember. I did not give it a full try because I failed to wipe everything because I was at work and wasn't really supposed to be on it. I will do it again tonight with full wipe and see if it gives better results and let you know.
I just realized you have a tab build so I will try that one. The one thing I noticed right away with cm7 is that my tablet looked like a phone and I have been jumping around from HC roms and got used to a more tablet specific rom. I will give you update in a few hours I think.
Click to expand...
Click to collapse
The FCs you were getting were probbly from DSPManager. It is a known issue that seems to come from a "broken pipe" in one of the libs. For now, it is best just to remove it.
For the bootup, someone suggested moving apps to the SD card. Apparently, it would speed up the process.
I am conscious that 2.3.4 is made with phones in mind but it is a step up from Froyo and having partial hardware acceleration helps.
Just tried again and got stuck on CM7 logo boot loop, this was with the CM7 tab build. did full wipe of cache, dalvik, and user data. Not sure what happened. Restoring to Illuminate rom if you have some ideas on how or what else I can do to try this rom let me know.
Hey there Ice.
First off, awesome work on this and thank you for taking the time.
I would recommend editing the build.prop file to set the Manufacturer to HTC. This fixes the playback issue with Netflix (Chipmunk). I tested this out fully on my gTab last night and it's the ONLY setting that needs to be modified. Aside from that, everything seems to work.
Good work!
Hi
Has anyone tried installing volume+ on this rom? I'm on BL1.1 CM7 rom but volume+ does not install. If this works, I'll take the bold step to upgrade to BL1.2.
I don't know if it's just my hardware. My gtab's speaker is very soft and I want to try cranking it up with volume+ (which works on my phone running cm7).
thanks a lot.
DroidTV phone size not full screen....Anyone have other apps that did that after....
I was using DroidTV, and it was full-screen and then rebuild my G Tab with the cm7tabl-0710200-1.2 and when I reinstalled DroidTV it is now phone size display on the G Tablet.
I used Titanium Backup to restore the app and the settings. Anyone have issues like this with an app that did that after re-installing after a full rebuild? Any build.prop setting or somewhere I could check?
Thanks. Steve.
Thanks everyone for your feedback.
@Mike: I have heard of this before and wasn't sure if anyone would be interested in it. I will change that on the CM7Tab version in the next few days.
@Vhend: Yes, Vol+ works on 1.2. You enter CWM and it works great here.
@Artful: I will look into this. It might just be that the rsolution isnÈt set right. I will let you know how it goes.
Icewyng said:
Thanks everyone for your feedback.
@Mike: I have heard of this before and wasn't sure if anyone would be interested in it. I will change that on the CM7Tab version in the next few days.
@Vhend: Yes, Vol+ works on 1.2. You enter CWM and it works great here.
@Artful: I will look into this. It might just be that the rsolution isnÈt set right. I will let you know how it goes.
Click to expand...
Click to collapse
Thanks Ice. Other than that I have yet to find any major issues that in the build.
Other than apps that open portrait only with the bottom on the side with the power button. Tried to say to not rotate 90 degrees but they still open that way Apps that open landscape then won't rotate to the 90 degree position but portrait apps still open that way
This is the most stable I have used and performance seems good. A co-workers has the same build, I installed it for them since they are techie-challenged, and theirs is turtle slow because I think they have Skype running all the time.
Icewyng said:
Thanks everyone for your feedback.
@Vhend: Yes, Vol+ works on 1.2. You enter CWM and it works great here.
Click to expand...
Click to collapse
sorry for not being clear. I did not mean pressing the volume+ button. i actually meant this app to boost the volume of gtablet.
http://forum.xda-developers.com/showthread.php?t=1023433
I guess the app has dependencies on dsp manager, that's why it did not work on my B1.1 cm7. Since you have replaced the dsp with a workable one in your rom, I would like to check if the volume+ app works here.
Appreciate your work on the rom!
vhendsume said:
sorry for not being clear. I did not mean pressing the volume+ button. i actually meant this app to boost the volume of gtablet.
http://forum.xda-developers.com/showthread.php?t=1023433
I guess the app has dependencies on dsp manager, that's why it did not work on my B1.1 cm7. Since you have replaced the dsp with a workable one in your rom, I would like to check if the volume+ app works here.
Appreciate your work on the rom!
Click to expand...
Click to collapse
Actually, I think it has more to do with a problem with one of the audio libraries. I did a logcat and it seems something called AudioFlinger can't set a parameter properly.
If anyone can fix this, I can send the logcat to help out.
I wanted to apologize for not being able to upload the new nightly today. I had to rebuild my computer and took the opportunity to switch to a new Linux distro. Just tested the new system and all is great.
I will post Build 07172011 later this morning.
Where are the nightly's getting posted now? Thanks and this is the most stable MOD I've had on my G Tab.
Do video apps work as far as no rotation with Oovoo, yahoo, reelportal, etc? Audio work okay with chatting?
mirrors:
http://dev-host.org/cops0ujuwmm0/update-cm-7.1.0-smb_a1002-07182011-1.2.zip
http://dev-host.org/8xjvaysomd1i/update-cm7tab-07102011-1.2.zip.zip
-deck
ok, here we go.
Last days peetr_ and me worked on fixing kernel stuff for cm9.
I want to post here our current state of kernel, based on latest github sources of jokersax (thank you for hard working all the time).
any kernels from here: ramdisk will not work with joker's beta 0.1.0 since it has sdcard-ext standart, use his latest builds with emmc/sdcard
[V1]
Some info about fixes:
1. integrated 1% battery directly to kernel, you don't need to install zip fix that I did myself before.
2. activated xt_quota[2], xt_qtaguid addons, it means Network statistics, Battery statistics work now as they should; actually it should increase battery life.
3. some small things
tested as update on beta 0.2, I didn't try full wipe with that kernel.
to be continued.
++++++++++++++++
[V2b]
changes [added]
1. battery fix from peetr_, great idea.
2. jit for cpu
3. avp patch
4. ppp stability patch
5. more cpu patches
6. mem cache improvement
7. some kernel small fixes
++
8. bluedroid lib replacing, it is from CM7 [temp_fix] -> less errors of bluetooth dbus, less drain, but it is still broken (concerning battery life)
++
8. separated version of 1.4 kernel by PM request, not tested. - ready, file was updated.
9. includes all fixes of V1
links at the bottom
10. fix of V2 old version regarding touchpad strange states.
++++++++++++
[V3]
1. touchpad major fix
2. cpu improvements
3. irq improvements
4. tcp/udp patches ()
5. battery will not fool you with 101% ++
6. other things
++++++++++++
[V4]
1. kernel
1.1 tons of fixes + peetr_'s awesome ramdisk work
1.2 as test showed, better battery life in idle mode.
1.3 separated to 1.0, 1.3, 1.4 kernels.
1.4 download in mediafire, can't attach files for strange reason here.
1.0 GHz
1.3 GHz
1.4 GHz
2. ROM
2.0 MUST WIPE /cache partition before installing
2.1 fixed bluedroid (compiled for cm9)
2.2 torch works
2.3 included 1.3 v4 kernel with modules
2.4 fixed some phone app mistakes (credits to avalakvista)
2.5 GSM fix (for international GSM, not USA): it must be installed if you wipe ALL data, (/data and /cache partitions). If you want to install this ROM after other CM9 without wiping /data and you had working GSM, then flashing GSM fix is optional. If you have com.android.phone error after first boot of ROM, then you should wipe all /data and /cache and install ROM, then GSM fix.
download GSM fix
2.6 recommend to use joker-gapps-v10 (can be found in his thread-first post-of cm9)
2.7 there some other fixes but I dont actually remember
2.8 download link here.
+++++++++++
===========
+++++++++++
[V7]
added fixes from turl and faux, thanks to them.
[1.3GHz only]
Outdated and no more supported until some ics kernel source will be out!
peetr_ said:
reserved for future
Click to expand...
Click to collapse
nice work guys!
olegfusion said:
ok, here we go.
Last days peetr_ and me worked on fixing kernel stuff for cm9.
I want to post here our current state of kernel, based on latest github sources of jokersax (thank you for hard working all the time).
Some info about fixes:
1. integrated 1% battery directly to kernel, you don't need to install zip fix that I did myself before.
2. activated xt_quota[2], xt_qtaguid addons, it means Network statistics, Battery statistics work now as they should.
3. some small things
tested as update on beta 0.2, I didn't try full wipe with that kernel.
to be continued.
Click to expand...
Click to collapse
2 Questions....
1) Is this based on the 1.3oc Joker had out?
2) Does it have the SDcard and keyboard fixes for 0.2.0?
Thanks guys...I'll nandroid and then test it out in a few....charging battery up now
thx will try now
Th3Bill said:
2 Questions....
1) Is this based on the 1.3oc Joker had out?
2) Does it have the SDcard and keyboard fixes for 0.2.0?
Thanks guys...I'll nandroid and then test it out in a few....charging battery up now
Click to expand...
Click to collapse
1) yes
2) sdcard connects fine (again, I flashed without full wipe), but android keyboard is not fixed looks like, I have other keyboard installed and android keyboard is disabled. Please install other keyboard before install kernel
update.
actually please test and say
olegfusion said:
1) yes
2) sdcard connects fine (again, I flashed without full wipe), but android keyboard is not fixed looks like, I have other keyboard installed and android keyboard is disabled. Please install other keyboard before install kernel
Click to expand...
Click to collapse
Already have swiftkey x and swype on it
Sucks! I ran out of Thanks for the day! I'll make sure to come back tomorrow and thank
I did the test of android keyboard wrong, to be more correct now, just saying that keyboard works.
thanks for peetr_
Very nice, gentlemen! Looking very good so far! Thanks for your hard work!
---------- Post added at 02:34 PM ---------- Previous post was at 02:30 PM ----------
olegfusion said:
I did the test of android keyboard wrong, to be more correct now, just saying that keyboard works.
thanks for peetr_
Click to expand...
Click to collapse
I can second that keyboard works...while I have swiftkey and swype, I had android inverted keyboard in use, and still working
Hopefully it's fixes my battery issue for dieing faster than hell
Sent from my MB855 using XDA App
Just downloaded, gonna give it a try after work. I'll report back with findings.
Sent from my CM9 Electrify.
I've been using it all afternoon pretty much. So far, so good. I haven't had anything FC since flashing. Looks to be nice and clean
i still cannot get it to read my SDcard.
bigelroy123 said:
i still cannot get it to read my SDcard.
Click to expand...
Click to collapse
Both show up on my phone. Probably haven't done the fix for the sd card that's listed in the "cm9 fixes" thread....
This is just a kernel...sd card issue is in vold.fstab
Th3Bill said:
Both show up on my phone. Probably haven't done the fix for the sd card that's listed in the "cm9 fixes" thread....
This is just a kernel...sd card issue is in vold.fstab
Click to expand...
Click to collapse
i did the fix and its still not working...changed that line and saved it. when i reboot its back to mmc2, and sdcard reading unmounted.
bigelroy123 said:
i did the fix and its still not working...changed that line and saved it. when i reboot its back to mmc2, and sdcard reading unmounted.
Click to expand...
Click to collapse
Do you have "use internal storage" checked in your "advanced" under system settings? That will cause problems....storages (internal and external) will read backwards...
The Emmc(internal storage) shows up at the BOTTOM of the "storage" section...
Which file manager did you use? If you use Root Explorer, mount as R/W, and open in text editor, it shouldn't revert...
Did you make sure you changed the correct 2? I had a guy last night who was changing the wrong one...it needs to be the one specific one...
Th3Bill said:
Do you have "use internal storage" checked in your "advanced" under system settings? That will cause problems....storages (internal and external) will read backwards...
The Emmc(internal storage) shows up at the BOTTOM of the "storage" section...
Which file manager did you use? If you use Root Explorer, mount as R/W, and open in text editor, it shouldn't revert...
Did you make sure you changed the correct 2? I had a guy last night who was changing the wrong one...it needs to be the one specific one...
Click to expand...
Click to collapse
Thanks a lot....i had to mount as R/W in root explorer...everything is fine now.
Gonna test now... Does anyone have jokers stock kernel handy in case we need to revert?
Feel free to call my lazy about backing up and restoring but it'd be much easier and quicker to just flash the kernel ;0)
MobileAllStar said:
Gonna test now... Does anyone have jokers stock kernel handy in case we need to revert?
Feel free to call my lazy about backing up and restoring but it'd be much easier and quicker to just flash the kernel ;0)
Click to expand...
Click to collapse
I've been running this one all afternoon...its a modified joker kernel. So far very nice and stable. Also seems good on battery
Sent from my MB855 using xda premium
Does this fix solve gsm problem? Im out of usa
Sent from my Sensation using XDA App
This ROM features a stable enviroment [the most stable tested by me so far], with the least number of bugs (with 366BB), and probably one of the best performances.
Features: This ROM provides a default Portrait screen, it also has as the stock theme - TouchWizzedB (It looks like the Samsung ROM's, don;t know why i like it)
It features BeatsAudio, Bravia Engine and xLoud,
IIt provides a bootanimation and sound provided by Madhacker.
(if the bootsound is not on and you really want it, enter in terminal enablebootsound)
It also provides as the default launcher - GO Launcher Ex.
You can add [highlight]software[/highlight] capacitive buttons in the taskbar - thanks to nom051205 < Zip below
It was tweaked for daily use.
Skype has not been fully fixed, but i found a workaround, after rebooting, call someone, or a number like 444 then close, it should work, tested multiple times and it worked, i'm going to try and make a script to get rid of this step. (sometimes it works without doing a thing, so i think it is about luck )
Also, skype seems to leave the speaker on after singning out creating a huge battery drain, if you experience this kind of issue please remove your Skype and install this one, then go to advanced settings (in skype) > sound settings > disable sign-in/out sounds and Force speaker off after calls.
With those workarounds provided above, you should have a seamless experience with Skype..
FAQ:Q: Does it have USSD fix/Gapps/Phoenix Kernel?
Yes
Q: Is the WiFi stable?
With 366BB i have no problems with WiFi stability.
Q: Do i have to do a full factory reset if i come from other CM7 ROM?
No, just wipe dalvik cache, full factory reset is a must if you come from DSC/FroYo/Official 2.3.3.
Q: How do i flash 366BB?
You put your device in Fastboot, connect the USB and use a tool provided here or here.
Q: I can't install the ROM! Installation Aborted! (yeah, yeah, this is not a question..)
Open the zip file then you will see a folder, go into the folder, select all (meta.inf; system; boot.img) and re-zip those files and name it LXdroid 0.x.zip then flash it.
Credits to nom051205 for using his post almost copy-paste.
Q: What's wrong with Swype? It just FC's?
Install it manually, this should do the trick, you can find swype.apk in a link below.
Bootsound/Bootanimation Script Commands
Terminal commands for scripts:
enablebootsound - enables bootsound
bootsoundoff - turns bootsound off
bootsoundon - turns bootsound on after being turned off
newbootsound - /sdcard/android_audio.mp3 is copied as new bootsound
newbootanim - /sdcard/bootnanimation.zip is copied as new boot animation
(Probably you need to type su before those scripts, just saying...)
Credits go here.
Note: This is my first ROM, feedbacks and head-ups/tips would be welcomed in order to tweak it further.
--Added Screens for those who want to see something
You can upgrade to higher versions of LXdroid ROM without losing your data, just wipe Dalvik Cache!
LXdroid ROM 0.2 is provided as standalone flashable zip, it doesn't need 0.1 in order to work.
Download link: LXdroid ROM 0.2
Download link LXdroid ROM 0.1 (old, useless, not needed)
Download link swype.apk
Hotfixes for LXdroid 0.2 for Autobrightness FC and xLoud and Bravia permissions found here!
Quick tutorial aka Roadmap to a Custom ROM -Download ADB/Fastboot tools + Drivers from here. (You need to install the drivers before you begin).
-Download MultiRecoveryFlasher from here.
-Download MultiBasebandFlasher from here or download dsp and baseband flasher by n0p and StreakOwner from here.
-Download a custom ROM like DSC (most stable in my opinion), Longhorn or, the one provided here.
Now let's get started for real!
1-Install the drivers.
2-Put your streak in fastboot by turning the phone off and after that powering on by holding down volume + power button.
3-Open MultiRecoveryFlasher and flash StreakMod recovery. Reboot.
4-Put your streak again in fastboot.
5-Open MultiBasebandFlasher and flash 366BB or the script provided alternatively (does the job all by itself ). Reboot.
6-Enter Recovery by turning the phone off and then powering on holding up volume + down volume + power button.
7-Select "Software upgrade via Update.pkg on Sd Card"
8-A Dell logo and an attention will appear, press power button once to show the menu.
9-Hit advanced to mount sdcard via PC, so the SD card will appear in you PC via recovery.
10-Copy the ROM you downloaded to the sdcard (preferably to root).
11-Hit back in recovery, choose install sdcard updade.zip, then choose zip from sdcard, browse for your zip, and hit the camera button then select yes.
12-After the installation is completed, hit back to the main screen of the recovery, and choose wipe data/factory reset, then wipe cache partition, then choose advanced, wipe dalvik cache, wipe battery status.
13-(It is recommended to reboot again and do a factory reset from the dell recovery, White Letters)
14-The system will take some time to boot up, but you are done, enjoy your custom ROM.-------------------------------In my opinion the fastest and easiest way to get a custom ROM--------------------------------------------------
Disclaimer:
This ROM was made primarly for my personal use, it provides elements from all over this Forum, Credits section thanks personally all and i thank more of them that are not listed there, it is based on CM7.2 mdpi by hPa, it has elements from Longhorn and others, as always do a nandroid backup just in case, and don't blame me for ruining your beloved streak, although i don't think you can .
Credits:
The people/teams that inspired me to do this:
-DSC Team / n0p - Kernel and many Tweaks.
-hPA - For porting CM7 to streak.
-Tenorntex - Some tweaks imported from Longhorn, dialing screen theme.
-nom051205 - Soft-Buttons flashable zip
-Madhacker - Bootanimation and sound.
-xda Forum - For a great enviroment, other ideeas and tweaks.
-Google - Great search engine, thanks for the Android OS
-Others
--If you want credits for something i have in my ROM and i forgot about you, please let me know and i will update this --
Changelog:
0.3 - TBA
0.2 - 21 august 2012 - skype seems to be fixed, needs more testing, further improved performance, added BeatsAudio, Bravia Engine, xLoud, added stock Swype keyboard, bootsound enabled by default, disabled USB Debugging icon from Status Bar, (only the Icon, debugging remains enabled), maybe more - Kernel: DSC Phoenix Kernel Test 4
0.1 - 20 august 2012 - First release, good performance, things that work on all CM7 ROM's work on this one, things that don't work in all CM7 ROM's don't work in this one. - Kernel: DSC Phoenix Kernel Test 4
I guess it has fixed CM settings (like setting cpu frequency from within the settings and fixed lockscreen on 160 or 180 ??
jitin02 said:
I guess it has fixed CM settings (like setting cpu frequency from within the settings and fixed lockscreen on 160 or 180 ??
Click to expand...
Click to collapse
You can see the CPU settings, freq's and governors but you can't change them from the CM settings, i've included AnTuTu CPU Master Free in the ROM, and the locksreen it works fine on Ring and Lense, Rotary and Sliding Tab are small and aligned to the left. so i would say that no, it doesn't have them fixed as i didn't needed them, but maybe i will look into it.
Personally i use Ring Style at lockscreen and dial screen, with one ring only at lock and the default Freqs (128-998 mhz , Conservative).
Lexmazter said:
You can see the CPU settings, freq's and governors but you can't change them from the CM settings, i've included AnTuTu CPU Master Free in the ROM, and the locksreen it works fine on Ring and Lense, Rotary and Sliding Tab are small and aligned to the left. so i would say that no, it doesn't have them fixed as i didn't needed them, but maybe i will look into it.
Personally i use Ring Style at lockscreen and dial screen, with one ring only at lock and the default Freqs (128-998 mhz , Conservative).
Click to expand...
Click to collapse
if u can look into it i will be thankfull to u as i had to go back to froyo 351. b'coz of DSC wifi issue .
Thanks and is there no way to resolve cm settings frequncy issue:silly:
jitin02 said:
if u can look into it i will be thankfull to u as i had to go back to froyo 351. b'coz of DSC wifi issue .
Thanks and is there no way to resolve cm settings frequncy issue:silly:
Click to expand...
Click to collapse
You can use alternative software, as i mentioned, there is SetCPU or CPU Master Free, and CPU Master doesn't stay always on in RAM and you can set it to Set frequencies on boot
I think that CM frequiencies support must be added from the kernel, so i don't think i can do something about it
jamo59
Hello!
I like the ROM!
Only the Longhorn 2.9.1 Quadrant 2300 points for that!
The LXdroid only 0.1 points in 1408.
Well, it's a huge difference.
Test Battery, but the IGO primo 9 to be strong!
This looks like a very fast everything works properly (from my experience it!)
jamo59 said:
Hello!
I like the ROM!
Only the Longhorn 2.9.1 Quadrant 2300 points for that!
The LXdroid only 0.1 points in 1408.
Well, it's a huge difference.
Test Battery, but the IGO primo 9 to be strong!
This looks like a very fast everything works properly (from my experience it!)
Click to expand...
Click to collapse
I made this ROM without testing Quadrant,i never trusted that benchmark , i tested with AnTuTu Benchmark and it is not a big difference from Longhorn to LXdroid, i still need to tweak something more, but the overall feel is smooth as butter in my experience and the battery life is just great for me.
jamo59
Whew!
Now, I see no Google Talk?
Even I test!
jamo59 said:
Whew!
Now, I see no Google Talk?
Even I test!
Click to expand...
Click to collapse
You can download it from Google Play (Market), i don't use it so i didn't included it
jamo59 said:
Whew!
Now, I see no Google Talk?
Even I test!
Click to expand...
Click to collapse
I think you're really really fast IGO is not there!
Longer certainly really deserves a try!:good:
SKYPE ??
so what about skype, is it working ??
MadHaker said:
so what about skype, is it working ??
Click to expand...
Click to collapse
I'll tell you! I'm also interested!
Time!
MadHaker said:
so what about skype, is it working ??
Click to expand...
Click to collapse
I'm testing it now , i'l report back later.
EDIT: Not working...checking for a fix...
Lexmazter said:
I'm testing it now , i'l report back later.
Click to expand...
Click to collapse
Not ok! (skype)
Lexmazter said:
I'm testing it now , i'l report back later.
EDIT: Not working...checking for a fix...
Click to expand...
Click to collapse
i am sorry to say that any rom above 2.3.3 usually have problem with voip and there are no fixes for it at the moment...
deysmacro said:
i am sorry to say that any rom above 2.3.3 usually have problem with voip and there are no fixes for it at the moment...
Click to expand...
Click to collapse
Yeah, you said it, "at the moment"
jamo59 said:
Not ok! (skype)
Click to expand...
Click to collapse
Hello there!
If anyone has not read it, the good must be so skype has stopped working, that:
1, restart
2, the recording is started and is ready to.
3, visszahallgatod
4 to start the skype
5, a voice recorder pick up service.
6, to listen
7, glad it works!
jamo59 said:
Hello there!
If anyone has not read it, the good must be so skype has stopped working, that:
1, restart
2, the recording is started and is ready to.
3, visszahallgatod
4 to start the skype
5, a voice recorder pick up service.
6, to listen
7, glad it works!
Click to expand...
Click to collapse
Can you be more specific, i don't really understand what you are trying to say here
Lexmazter said:
Can you be more specific, i don't really understand what you are trying to say here
Click to expand...
Click to collapse
2nd that ;0)