Hiya,
I noticed today, that sound and vibration does not work for incoming message, I changed the settings in settings tab-->menu-->all settings-->sound & notification-->notifications tab, thick and unthick "vibrate", then soft reset and still nothing, all sound and vibrations work for calls and everything else, except the messages, anyone has solution for this issue?
Rom: O2 stock rom 1.72.206.3
Manila: 2.5.2012
Radio: 2.07.51.22_2
Also have installed GTX Theme, Dark Ninja: white theme, color patch, android taskbar, CHTEditor 1.7.0, till now everything were workin just fine, as I said, I noticed that today, do not know when it happened, will be much appreciated for solution, thx in advance
hey,
same here (since a few weeks...)
changed from custom ringtone to a system one: nothing changed. reverted via registry backup to a earlier status...no chance... only the led flashes green...
with email messages the notification works normal. I have absolutely no idea..
ozrom: 2.40 (os ver.: 5.2.23563)
radio: 2.08.50.08_2
any suggestions?
nothing worked for me...
greetings,
garans
self-helped:
you have to change in \windows the *409.html file name in to the hexadecimal number which you entered at HKCU\mui\curlang
btw: you can edit the content/message of the file.
the lazy way: just change back to WWE (409) in the registry...
link:
http://forum.xda-developers.com/showpost.php?p=5596533&postcount=2
and the language codes (hex!):
http://www.science.co.il/Language/Locale-Codes.asp
Thanks to NLS!
greetz
much appreciated mate, now it's working fine, thanks again mate
Related
Hi,
i have a 32mb xda and after upgrading to wm2003 i lose the checkboxes in dialogs, if i soft reset then they come back for a while and tapping on the text next to the box enables/disables the option but i get no boxes!
most strange, also i had to turn off the ir recieve but when turned off i still got the error for com 1 with navigator, i had to uncheck it then soft reset to apply that change.
i cooked the rom from jeffs kitchen a while ago and was going to redo it but it is unavailable and Yorchs only has the 4.0.05 rom.
Any ideas on the missing dialog checkboxes.
Regards
Smallboy.
Hi ! I had the same problem (even with no other app installed ! Just wm2003 and nothing else) , and I never solved it ... till the 4.01.00 went out. I tried this one and had no problem. All attempts I made with earlier versions were unsuccessfull ! Unfortunately, no rom kitchen use this version yet ! So I have a 'blank' rom version from T-Mobile found somewhere on a post on xda-developers.
Hope this help !
cheers for the reply,
as i unbderstand it the 4.1 rom only support gsm 900/1900 which is no good for me as a uk/orange customer.
regards
I have the same problem.
Im using an xda 2 on o2 with the following software
tom-tom navigator 2
gps 2.08
towa's patch
resco explorer
pocketinformant
spb pocketplus
claunch
clearnotify
Anyone else see a pattern?
Surur
Ditto for me. They're still "there", if you click your stylus over where they should be, you'll get them to work.
A reset clears the problem.
Looks like there's a leak that is using up the GDI heap. You can get the same type of error on desktop Windows.
the error is caused by navigator, i installed v2.24 on mine and also when i installed it on my mates xdaII he now has the same problem with checkboxes and radio buttons missing, they come back after a soft reset but go after running navigator..
Smallboy
smallboy. You can use 4.01.00 on Orange as long as you only update the CE Rom and not the radio stack. Just make sure you don't go onto the Band select page on the phone settings.
Hi Swifty,
Can you give me a dl site for 4.1.00 rom.
cheers m8
ftp://tmobile:[email protected]
You need to just extract the CE rom using something like winzip, then use XDA Tools to put it onto an SD card and flash to your phone.
HTH
Neil
cheers Swifty, i have this now, all i need is a way of making the nb1 file into an .exe
UPDATE
I have now reflashed to 4.01.00 (t-mobile) and then installed navigator and voice but not gps, upgraded nav to 2.24 then installed gps 2.09
No missing checkboxes now but stil get the initial strtup problem of no map, which is cured by going to navigator mode.
Hi!
SE rulezzz ...but i have one problem: while my MDA is craddled or on external power, power button is OK. But on battery power (& not USB craddled to PC ) first push - turned off my device (its OK) but second push not turned on - only result is green led is off . While somone call to me, my device automatically is on, & all i s OK. I mean, this is a software problem...Maby registry tweak is needed??
TNX
just wonder what version of OS you running??
no problem on my CH Win2k3SE
tested , just like normal
I had same problem after installed the "Vito Buttonmapper". When I was uninstall it and proceeded a hard reset, the power button working again...
by Avers
OK,
ROm v. 2.06.00WWE
ROM date 06/14/04
Radio 1.14.00
EX ROM...hmmm....2.06.100a combined with extensions of ERA
next i add PHM tools, KSE True Fax 2.0, Fonix Voice Apps...
i had this problem on SE but because i restored my back up files, BTW maybe you want not to restore your information i found it makes it much more stable
Same problem here with 2.06. Hard reset doesnt cure it. Also I don't have sound from the audio jack anymore with this rom....
Make sure you don't have frontlight_wavedev_dim.sa.CAB in your extended ROM. This caused me problems too.
A second hard reset with empty extended rom did cure it though, also I have audio again. Will now put the cabs back one by one to see which one is the culprit ......... to be continued
TNX guys, maby hard reset is only way to remove this problem. This weekend i will try to do this, and will be testing, which aplication cause this problem.
I only installed the camera from ext rom and everything seems to work including gprs, bluetooth gps, contacts, audio.
so i figure why clutter my mda with all kinds of stuff that I evidently don't need ? so I left it like this and I now have a perfectly stable SE rom
Final
Hi All
Now all working gut . I has clear EXT ROM & im testoing all CAB's separatelly....The "bad boy" is customization CAB from ERA (not SE).
TNX 4 All!
caller id don't start even i run photo contact or run IA_CID_StartUp
any idea ?
since i install the new ROM, i cannot see the Extended_rom even i use ExtromTools unloker and unhide ....
the first time i boot, it's working, since no way.
thks
Conovor
try installing callerid again from another cab
it worked for me when i installed another version then removed it again!!!
Hi,
do you use Wisbar ?
When I upgrade my Qtek 2020 to Sin Merged rom, same problem occurs.
But I find out it was because Wisbar 2.1.10.
Just when upgrade Wisbar to last beta 2.1.14 the problem was solved.
Without Wisbar, caller id worked just fine.
AF
no, i don't use wish bar.
Hello everybody!
I have upgraded my Qtek 2020 to unofficial WM2003SE by Dr.Stein. In the new ROM I have found the new MMS Composer by ArcSoft version 2.0.0.13, but it doesn't work fine:
1) I cannot send and receive MMS cause it connects GPRS (by Vodafone MMS
settings), but after hang in receiving process... until it fails.
2) I have found in the Server Tab a lot of unnamed servers that I cannot remove; The only way was to delete all the keys in the registry HKLM/Software/Arcsoft/.../mm1 (it seems to be all the servers configured; all of them about URI=http://vxpix.com/servlets/mms)
3) After deleting, the server list is clean, but sometimes the vxpix server come back (1 or more)... and MMS still doesn't work... cause I cannot set up my Vodafone Italy settings...
I have red about this problem on this post:
http://forum.xda-developers.com/viewtopic.php?t=13817
Can someone help me? thank's in advance...
Cristian
OK... now it Works...
After removed all, and made a new configuration... it worked.... good...
thank's the same...
Cristian
MMS composer settings problem?
That unamed servers keep on apearing, I tried a lot of things now, out of ideas! removed them all and created my own, they keep on coming back! What can I do next?
RE
I read somewhere that v2.0.0.13 has to be compatible with your telco carrier file for it to work.
In my case v2.0.0.13 is NOT compatible with my telco carrier, SingTel.
However, by reverting back to v1.6.0.8 taken from the original O2 XDA II WM2003 ROM v1.60.00 it WORKS!
Thanks for the idea, but like some people I'm not very clued up with all this, How can i revert back to the previous version? Do you maybe have a cab file for me that I can install? If you can tell me what programs to use and how to use it i will do that too!
I just went back to dcd 2.3.2 and 3.27 radio to get back higher data speeds and working set up in my car (seidio car kit that doesn't work right between new radio/rom and bluetooth/external audio). Anyway, all looks fine but when I type any of the programming codes in the dialer(and I have my unlock code), nothing happens. I get no edit screen or anything. Seems like this could be a dialer issue. Anyone seen this? I think I have the stock dialer and when I built my rom I don't think I included the newer dialers at all. maybe this is the issue? I can run epst from the windows directory I guess but not sure I have changed what I need there. the usual reprovisioning with ##code# was so simple with just the two entries of my phone number. Any help is appreciated.
Dailer
Did you install a different dialer after loading the rom. I've done that (htc dialer, big button dialer) and then codes wouldn't work until after I uninstalled them . . . for what is woth!
I had a similar issue, but on verizon. When I went to cook the ROM there where 2 dialer options: 1 for the vouge (default) and 1 for the titan. I'm not sure which I selected, but it had the touch-like dialer. Anyway, when it didn't work I flashed to DCD 3.0.1 (no kitchen) and it worked.
I rebuilt the rom with the default selections for the dialer and it worked again.